X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fsmc91x.h;h=d2767e6584a98c320d1ac88ff1a830b5b4131149;hb=refs%2Fheads%2Fvserver;hp=cf74b74c30018cc04b5b684a5f6c3a9e8a6f68ea;hpb=c7b5ebbddf7bcd3651947760f423e3783bbe6573;p=linux-2.6.git diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index cf74b74c3..d2767e658 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -39,11 +39,7 @@ * Define your architecture specific bus configuration parameters here. */ -#if defined(CONFIG_SA1100_GRAPHICSCLIENT) || \ - defined(CONFIG_SA1100_PFS168) || \ - defined(CONFIG_SA1100_FLEXANET) || \ - defined(CONFIG_SA1100_GRAPHICSMASTER) || \ - defined(CONFIG_ARCH_LUBBOCK) +#if defined(CONFIG_ARCH_LUBBOCK) /* We can only do 16-bit reads and writes in the static memory space. */ #define SMC_CAN_USE_8BIT 0 @@ -94,7 +90,26 @@ __l--; \ } \ } while (0) -#define set_irq_type(irq, type) +#define SMC_IRQ_FLAGS (0) + +#elif defined(CONFIG_SA1100_PLEB) +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) #elif defined(CONFIG_SA1100_ASSABET) @@ -114,6 +129,19 @@ #define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l)) #define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l)) +#elif defined(CONFIG_MACH_LOGICPD_PXA270) + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) + #elif defined(CONFIG_ARCH_INNOKOM) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_ARCH_PXA_IDP) || \ @@ -136,7 +164,7 @@ /* We actually can't write halfwords properly if not word aligned */ static inline void -SMC_outw(u16 val, unsigned long ioaddr, int reg) +SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if (reg & 2) { unsigned int v = val << 16; @@ -147,6 +175,50 @@ SMC_outw(u16 val, unsigned long ioaddr, int reg) } } +#elif defined(CONFIG_ARCH_OMAP) + +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) + +#include +#include + +#define SMC_IRQ_FLAGS (( \ + machine_is_omap_h2() \ + || machine_is_omap_h3() \ + || machine_is_omap_h4() \ + || (machine_is_omap_innovator() && !cpu_is_omap1510()) \ + ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING) + + +#elif defined(CONFIG_SH_SH4202_MICRODEV) + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 + +#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000) +#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000) +#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000) +#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000) +#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000) +#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000) +#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l) +#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l) +#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) + +#define SMC_IRQ_FLAGS (0) + #elif defined(CONFIG_ISA) #define SMC_CAN_USE_8BIT 1 @@ -166,12 +238,129 @@ SMC_outw(u16 val, unsigned long ioaddr, int reg) #define SMC_CAN_USE_16BIT 1 #define SMC_CAN_USE_32BIT 0 -#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000) -#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000) -#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000) -#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000) -#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l) -#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l) +#define SMC_inb(a, r) inb(((u32)a) + (r)) +#define SMC_inw(a, r) inw(((u32)a) + (r)) +#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r)) +#define SMC_outw(v, a, r) outw(v, ((u32)a) + (r)) +#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) + +#define RPC_LSA_DEFAULT RPC_LED_TX_RX +#define RPC_LSB_DEFAULT RPC_LED_100_10 + +#elif defined(CONFIG_MACH_LPD79520) \ + || defined(CONFIG_MACH_LPD7A400) \ + || defined(CONFIG_MACH_LPD7A404) + +/* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the + * way that the CPU handles chip selects and the way that the SMC chip + * expects the chip select to operate. Refer to + * Documentation/arm/Sharp-LH/IOBarrier for details. The read from + * IOBARRIER is a byte, in order that we read the least-common + * denominator. It would be wasteful to read 32 bits from an 8-bit + * accessible region. + * + * There is no explicit protection against interrupts intervening + * between the writew and the IOBARRIER. In SMC ISR there is a + * preamble that performs an IOBARRIER in the extremely unlikely event + * that the driver interrupts itself between a writew to the chip an + * the IOBARRIER that follows *and* the cache is large enough that the + * first off-chip access while handing the interrupt is to the SMC + * chip. Other devices in the same address space as the SMC chip must + * be aware of the potential for trouble and perform a similar + * IOBARRIER on entry to their ISR. + */ + +#include /* IOBARRIER_VIRT */ + +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_NOWAIT 0 +#define LPD7X_IOBARRIER readb (IOBARRIER_VIRT) + +#define SMC_inw(a,r)\ + ({ unsigned short v = readw ((void*) ((a) + (r))); LPD7X_IOBARRIER; v; }) +#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7X_IOBARRIER; }) + +#define SMC_insw LPD7_SMC_insw +static inline void LPD7_SMC_insw (unsigned char* a, int r, + unsigned char* p, int l) +{ + unsigned short* ps = (unsigned short*) p; + while (l-- > 0) { + *ps++ = readw (a + r); + LPD7X_IOBARRIER; + } +} + +#define SMC_outsw LPD7_SMC_outsw +static inline void LPD7_SMC_outsw (unsigned char* a, int r, + unsigned char* p, int l) +{ + unsigned short* ps = (unsigned short*) p; + while (l-- > 0) { + writew (*ps++, a + r); + LPD7X_IOBARRIER; + } +} + +#define SMC_INTERRUPT_PREAMBLE LPD7X_IOBARRIER + +#define RPC_LSA_DEFAULT RPC_LED_TX_RX +#define RPC_LSB_DEFAULT RPC_LED_100_10 + +#elif defined(CONFIG_SOC_AU1X00) + +#include + +/* We can only do 16-bit reads and writes in the static memory space. */ +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inw(a, r) au_readw((unsigned long)((a) + (r))) +#define SMC_insw(a, r, p, l) \ + do { \ + unsigned long _a = (unsigned long)((a) + (r)); \ + int _l = (l); \ + u16 *_p = (u16 *)(p); \ + while (_l-- > 0) \ + *_p++ = au_readw(_a); \ + } while(0) +#define SMC_outw(v, a, r) au_writew(v, (unsigned long)((a) + (r))) +#define SMC_outsw(a, r, p, l) \ + do { \ + unsigned long _a = (unsigned long)((a) + (r)); \ + int _l = (l); \ + const u16 *_p = (const u16 *)(p); \ + while (_l-- > 0) \ + au_writew(*_p++ , _a); \ + } while(0) + +#define SMC_IRQ_FLAGS (0) + +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) #else @@ -194,7 +383,6 @@ SMC_outw(u16 val, unsigned long ioaddr, int reg) #endif - #ifdef SMC_USE_PXA_DMA /* * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is @@ -202,15 +390,16 @@ SMC_outw(u16 val, unsigned long ioaddr, int reg) * different and probably not worth it for that reason, and not as critical * as RX which can overrun memory and lose packets. */ -#include +#include #include +#include #ifdef SMC_insl #undef SMC_insl #define SMC_insl(a, r, p, l) \ smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -223,21 +412,23 @@ smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, /* 64 bit alignment is required for memory to memory DMA */ if ((long)buf & 4) { - *((u32 *)buf)++ = SMC_inl(ioaddr, reg); + *((u32 *)buf) = SMC_inl(ioaddr, reg); + buf += 4; len--; } len *= 4; - dmabuf = dma_map_single(NULL, buf, len, PCI_DMA_FROMDEVICE); + dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); DCSR(dma) = DCSR_NODESC; DTADR(dma) = dmabuf; DSADR(dma) = physaddr + reg; DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | DCMD_WIDTH4 | (DCMD_LENGTH & len)); DCSR(dma) = DCSR_NODESC | DCSR_RUN; - while (!(DCSR(dma) & DCSR_STOPSTATE)); + while (!(DCSR(dma) & DCSR_STOPSTATE)) + cpu_relax(); DCSR(dma) = 0; - dma_unmap_single(NULL, dmabuf, len, PCI_DMA_FROMDEVICE); + dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); } #endif @@ -246,7 +437,7 @@ smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, #define SMC_insw(a, r, p, l) \ smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -259,38 +450,115 @@ smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma, /* 64 bit alignment is required for memory to memory DMA */ while ((long)buf & 6) { - *((u16 *)buf)++ = SMC_inw(ioaddr, reg); + *((u16 *)buf) = SMC_inw(ioaddr, reg); + buf += 2; len--; } len *= 2; - dmabuf = dma_map_single(NULL, buf, len, PCI_DMA_FROMDEVICE); + dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE); DCSR(dma) = DCSR_NODESC; DTADR(dma) = dmabuf; DSADR(dma) = physaddr + reg; DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 | DCMD_WIDTH2 | (DCMD_LENGTH & len)); DCSR(dma) = DCSR_NODESC | DCSR_RUN; - while (!(DCSR(dma) & DCSR_STOPSTATE)); + while (!(DCSR(dma) & DCSR_STOPSTATE)) + cpu_relax(); DCSR(dma) = 0; - dma_unmap_single(NULL, dmabuf, len, PCI_DMA_FROMDEVICE); + dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE); } #endif static void -smc_pxa_dma_irq(int dma, void *dummy, struct pt_regs *regs) +smc_pxa_dma_irq(int dma, void *dummy) { DCSR(dma) = 0; } #endif /* SMC_USE_PXA_DMA */ -/* Because of bank switching, the LAN91x uses only 16 I/O ports */ +/* + * Everything a particular hardware setup needs should have been defined + * at this point. Add stubs for the undefined cases, mainly to avoid + * compilation warnings since they'll be optimized away, or to prevent buggy + * use of them. + */ + +#if ! SMC_CAN_USE_32BIT +#define SMC_inl(ioaddr, reg) ({ BUG(); 0; }) +#define SMC_outl(x, ioaddr, reg) BUG() +#define SMC_insl(a, r, p, l) BUG() +#define SMC_outsl(a, r, p, l) BUG() +#endif + +#if !defined(SMC_insl) || !defined(SMC_outsl) +#define SMC_insl(a, r, p, l) BUG() +#define SMC_outsl(a, r, p, l) BUG() +#endif + +#if ! SMC_CAN_USE_16BIT + +/* + * Any 16-bit access is performed with two 8-bit accesses if the hardware + * can't do it directly. Most registers are 16-bit so those are mandatory. + */ +#define SMC_outw(x, ioaddr, reg) \ + do { \ + unsigned int __val16 = (x); \ + SMC_outb( __val16, ioaddr, reg ); \ + SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ + } while (0) +#define SMC_inw(ioaddr, reg) \ + ({ \ + unsigned int __val16; \ + __val16 = SMC_inb( ioaddr, reg ); \ + __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ + __val16; \ + }) + +#define SMC_insw(a, r, p, l) BUG() +#define SMC_outsw(a, r, p, l) BUG() + +#endif + +#if !defined(SMC_insw) || !defined(SMC_outsw) +#define SMC_insw(a, r, p, l) BUG() +#define SMC_outsw(a, r, p, l) BUG() +#endif + +#if ! SMC_CAN_USE_8BIT +#define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) +#define SMC_outb(x, ioaddr, reg) BUG() +#define SMC_insb(a, r, p, l) BUG() +#define SMC_outsb(a, r, p, l) BUG() +#endif + +#if !defined(SMC_insb) || !defined(SMC_outsb) +#define SMC_insb(a, r, p, l) BUG() +#define SMC_outsb(a, r, p, l) BUG() +#endif + +#ifndef SMC_CAN_USE_DATACS +#define SMC_CAN_USE_DATACS 0 +#endif + #ifndef SMC_IO_SHIFT #define SMC_IO_SHIFT 0 #endif -#define SMC_IO_EXTENT (16 << SMC_IO_SHIFT) +#ifndef SMC_IRQ_FLAGS +#define SMC_IRQ_FLAGS IRQF_TRIGGER_RISING +#endif + +#ifndef SMC_INTERRUPT_PREAMBLE +#define SMC_INTERRUPT_PREAMBLE +#endif + + +/* Because of bank switching, the LAN91x uses only 16 I/O ports */ +#define SMC_IO_EXTENT (16 << SMC_IO_SHIFT) +#define SMC_DATA_EXTENT (4) /* . Bank Select Register: @@ -569,14 +837,6 @@ static const char * chip_ids[ 16 ] = { NULL, NULL, NULL}; -/* - . Transmit status bits -*/ -#define TS_SUCCESS 0x0001 -#define TS_LOSTCAR 0x0400 -#define TS_LATCOL 0x0200 -#define TS_16COL 0x0010 - /* . Receive status bits */ @@ -669,6 +929,11 @@ static const char * chip_ids[ 16 ] = { * Note: the following macros do *not* select the bank -- this must * be done separately as needed in the main code. The SMC_REG() macro * only uses the bank argument for debugging purposes (when enabled). + * + * Note: despite inline functions being safer, everything leading to this + * should preferably be macros to let BUG() display the line number in + * the core source code since we're interested in the top call site + * not in any inline function location. */ #if SMC_DEBUG > 0 @@ -686,61 +951,142 @@ static const char * chip_ids[ 16 ] = { #define SMC_REG(reg, bank) (reg<> 8) -#define SMC_GET_TXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) & 0xFF) -#define SMC_GET_RXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) >> 8) -#define SMC_GET_INT() (SMC_inw( ioaddr, INT_REG ) & 0xFF) +/* + * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not + * aligned to a 32 bit boundary. I tell you that does exist! + * Fortunately the affected register accesses can be easily worked around + * since we can write zeroes to the preceeding 16 bits without adverse + * effects and use a 32-bit access. + * + * Enforce it on any 32-bit capable setup for now. + */ +#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT + +#define SMC_GET_PN() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG)) \ + : (SMC_inw(ioaddr, PN_REG) & 0xFF) ) + +#define SMC_SET_PN(x) \ + do { \ + if (SMC_MUST_ALIGN_WRITE) \ + SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2)); \ + else if (SMC_CAN_USE_8BIT) \ + SMC_outb(x, ioaddr, PN_REG); \ + else \ + SMC_outw(x, ioaddr, PN_REG); \ + } while (0) + +#define SMC_GET_AR() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG)) \ + : (SMC_inw(ioaddr, PN_REG) >> 8) ) + +#define SMC_GET_TXFIFO() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \ + : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) ) + +#define SMC_GET_RXFIFO() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \ + : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) ) + +#define SMC_GET_INT() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \ + : (SMC_inw(ioaddr, INT_REG) & 0xFF) ) + #define SMC_ACK_INT(x) \ do { \ - unsigned long __flags; \ - int __mask; \ - local_irq_save(__flags); \ - __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ - SMC_outw( __mask | (x), ioaddr, INT_REG ); \ - local_irq_restore(__flags); \ + if (SMC_CAN_USE_8BIT) \ + SMC_outb(x, ioaddr, INT_REG); \ + else { \ + unsigned long __flags; \ + int __mask; \ + local_irq_save(__flags); \ + __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \ + SMC_outw( __mask | (x), ioaddr, INT_REG ); \ + local_irq_restore(__flags); \ + } \ } while (0) -#define SMC_GET_INT_MASK() (SMC_inw( ioaddr, INT_REG ) >> 8) -#define SMC_SET_INT_MASK(x) SMC_outw( (x) << 8, ioaddr, INT_REG ) -#endif -#define SMC_CURRENT_BANK() SMC_inw( ioaddr, BANK_SELECT ) -#define SMC_SELECT_BANK(x) SMC_outw( x, ioaddr, BANK_SELECT ) -#define SMC_GET_BASE() SMC_inw( ioaddr, BASE_REG ) -#define SMC_SET_BASE(x) SMC_outw( x, ioaddr, BASE_REG ) -#define SMC_GET_CONFIG() SMC_inw( ioaddr, CONFIG_REG ) -#define SMC_SET_CONFIG(x) SMC_outw( x, ioaddr, CONFIG_REG ) -#define SMC_GET_COUNTER() SMC_inw( ioaddr, COUNTER_REG ) -#define SMC_GET_CTL() SMC_inw( ioaddr, CTL_REG ) -#define SMC_SET_CTL(x) SMC_outw( x, ioaddr, CTL_REG ) -#define SMC_GET_MII() SMC_inw( ioaddr, MII_REG ) -#define SMC_SET_MII(x) SMC_outw( x, ioaddr, MII_REG ) -#define SMC_GET_MIR() SMC_inw( ioaddr, MIR_REG ) -#define SMC_SET_MIR(x) SMC_outw( x, ioaddr, MIR_REG ) -#define SMC_GET_MMU_CMD() SMC_inw( ioaddr, MMU_CMD_REG ) -#define SMC_SET_MMU_CMD(x) SMC_outw( x, ioaddr, MMU_CMD_REG ) -#define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG ) -#define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG ) -#define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG ) -#define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG ) -#define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG ) -#define SMC_GET_REV() SMC_inw( ioaddr, REV_REG ) -#define SMC_GET_RPC() SMC_inw( ioaddr, RPC_REG ) -#define SMC_SET_RPC(x) SMC_outw( x, ioaddr, RPC_REG ) -#define SMC_GET_TCR() SMC_inw( ioaddr, TCR_REG ) -#define SMC_SET_TCR(x) SMC_outw( x, ioaddr, TCR_REG ) +#define SMC_GET_INT_MASK() \ + ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \ + : (SMC_inw( ioaddr, INT_REG ) >> 8) ) + +#define SMC_SET_INT_MASK(x) \ + do { \ + if (SMC_CAN_USE_8BIT) \ + SMC_outb(x, ioaddr, IM_REG); \ + else \ + SMC_outw((x) << 8, ioaddr, INT_REG); \ + } while (0) + +#define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT) + +#define SMC_SELECT_BANK(x) \ + do { \ + if (SMC_MUST_ALIGN_WRITE) \ + SMC_outl((x)<<16, ioaddr, 12<> 16; \ - } while (0) -#else -#define SMC_PUT_PKT_HDR(status, length) \ - do { \ - SMC_outw( status, ioaddr, DATA_REG ); \ - SMC_outw( length, ioaddr, DATA_REG ); \ + if (SMC_CAN_USE_32BIT) \ + SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \ + else { \ + SMC_outw(status, ioaddr, DATA_REG); \ + SMC_outw(length, ioaddr, DATA_REG); \ + } \ } while (0) + #define SMC_GET_PKT_HDR(status, length) \ do { \ - (status) = SMC_inw( ioaddr, DATA_REG ); \ - (length) = SMC_inw( ioaddr, DATA_REG ); \ + if (SMC_CAN_USE_32BIT) { \ + unsigned int __val = SMC_inl(ioaddr, DATA_REG); \ + (status) = __val & 0xffff; \ + (length) = __val >> 16; \ + } else { \ + (status) = SMC_inw(ioaddr, DATA_REG); \ + (length) = SMC_inw(ioaddr, DATA_REG); \ + } \ } while (0) -#endif -#if SMC_CAN_USE_32BIT #define SMC_PUSH_DATA(p, l) \ do { \ - char *__ptr = (p); \ - int __len = (l); \ - if (__len >= 2 && (unsigned long)__ptr & 2) { \ - __len -= 2; \ - SMC_outw( *(u16 *)__ptr, ioaddr, DATA_REG ); \ - __ptr += 2; \ - } \ - SMC_outsl( ioaddr, DATA_REG, __ptr, __len >> 2); \ - if (__len & 2) { \ - __ptr += (__len & ~3); \ - SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \ - } \ + if (SMC_CAN_USE_32BIT) { \ + void *__ptr = (p); \ + int __len = (l); \ + void __iomem *__ioaddr = ioaddr; \ + if (__len >= 2 && (unsigned long)__ptr & 2) { \ + __len -= 2; \ + SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \ + __ptr += 2; \ + } \ + if (SMC_CAN_USE_DATACS && lp->datacs) \ + __ioaddr = lp->datacs; \ + SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \ + if (__len & 2) { \ + __ptr += (__len & ~3); \ + SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \ + } \ + } else if (SMC_CAN_USE_16BIT) \ + SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \ + else if (SMC_CAN_USE_8BIT) \ + SMC_outsb(ioaddr, DATA_REG, p, l); \ } while (0) + #define SMC_PULL_DATA(p, l) \ do { \ - char *__ptr = (p); \ - int __len = (l); \ - if ((unsigned long)__ptr & 2) { \ - /* \ - * We want 32bit alignment here. \ - * Since some buses perform a full 32bit \ - * fetch even for 16bit data we can't use \ - * SMC_inw() here. Back both source (on chip \ - * and destination) pointers of 2 bytes. \ - */ \ - __ptr -= 2; \ + if (SMC_CAN_USE_32BIT) { \ + void *__ptr = (p); \ + int __len = (l); \ + void __iomem *__ioaddr = ioaddr; \ + if ((unsigned long)__ptr & 2) { \ + /* \ + * We want 32bit alignment here. \ + * Since some buses perform a full \ + * 32bit fetch even for 16bit data \ + * we can't use SMC_inw() here. \ + * Back both source (on-chip) and \ + * destination pointers of 2 bytes. \ + * This is possible since the call to \ + * SMC_GET_PKT_HDR() already advanced \ + * the source pointer of 4 bytes, and \ + * the skb_reserve(skb, 2) advanced \ + * the destination pointer of 2 bytes. \ + */ \ + __ptr -= 2; \ + __len += 2; \ + SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \ + } \ + if (SMC_CAN_USE_DATACS && lp->datacs) \ + __ioaddr = lp->datacs; \ __len += 2; \ - SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \ - } \ - __len += 2; \ - SMC_insl( ioaddr, DATA_REG, __ptr, __len >> 2); \ - } while (0) -#elif SMC_CAN_USE_16BIT -#define SMC_PUSH_DATA(p, l) SMC_outsw( ioaddr, DATA_REG, p, (l) >> 1 ) -#define SMC_PULL_DATA(p, l) SMC_insw ( ioaddr, DATA_REG, p, (l) >> 1 ) -#elif SMC_CAN_USE_8BIT -#define SMC_PUSH_DATA(p, l) SMC_outsb( ioaddr, DATA_REG, p, l ) -#define SMC_PULL_DATA(p, l) SMC_insb ( ioaddr, DATA_REG, p, l ) -#endif - -#if ! SMC_CAN_USE_16BIT -#define SMC_outw(x, ioaddr, reg) \ - do { \ - unsigned int __val16 = (x); \ - SMC_outb( __val16, ioaddr, reg ); \ - SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ + SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \ + } else if (SMC_CAN_USE_16BIT) \ + SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \ + else if (SMC_CAN_USE_8BIT) \ + SMC_insb(ioaddr, DATA_REG, p, l); \ } while (0) -#define SMC_inw(ioaddr, reg) \ - ({ \ - unsigned int __val16; \ - __val16 = SMC_inb( ioaddr, reg ); \ - __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ - __val16; \ - }) -#endif - #endif /* _SMC91X_H_ */