X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fsun3_82586.c;h=a3220a96524f0ead88f6a6b0089ec569007627ea;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=d5a58fb30d3a194772ce3da84b83a3a934100184;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index d5a58fb30..a3220a965 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -14,10 +14,10 @@
  * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
  * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
  * --------------------------
- * 
+ *
  * Consult ni52.c for further notes from the original driver.
  *
- * This incarnation currently supports the OBIO version of the i82586 chip 
+ * This incarnation currently supports the OBIO version of the i82586 chip
  * used in certain sun3 models.  It should be fairly doable to expand this
  * to support VME if I should every acquire such a board.
  *
@@ -122,7 +122,7 @@ sizeof(nop_cmd) = 8;
      DELAY_16(); DELAY_16(); } }
 
 static int     sun3_82586_probe1(struct net_device *dev,int ioaddr);
-static irqreturn_t sun3_82586_interrupt(int irq,void *dev_id,struct pt_regs *reg_ptr);
+static irqreturn_t sun3_82586_interrupt(int irq,void *dev_id);
 static int     sun3_82586_open(struct net_device *dev);
 static int     sun3_82586_close(struct net_device *dev);
 static int     sun3_82586_send_packet(struct sk_buff *,struct net_device *);
@@ -227,7 +227,7 @@ static int check586(struct net_device *dev,char *where,unsigned size)
 		return 0;
 
 	iscp_addr = (char *)dvma_btov((unsigned long)where);
-	
+
 	p->iscp = (struct iscp_struct *) iscp_addr;
 	memset((char *)p->iscp,0, sizeof(struct iscp_struct));
 
@@ -237,7 +237,7 @@ static int check586(struct net_device *dev,char *where,unsigned size)
 	sun3_reset586();
 	sun3_attn586();
 	DELAY(1);	/* wait a while... */
-	
+
 	if(p->iscp->busy) /* i82586 clears 'busy' after successful init */
 		return 0;
 
@@ -286,7 +286,7 @@ struct net_device * __init sun3_82586_probe(int unit)
 	unsigned long ioaddr;
 	static int found = 0;
 	int err = -ENOMEM;
-	
+
 	/* check that this machine has an onboard 82586 */
 	switch(idprom->id_machtype) {
 	case SM_SUN3|SM_3_160:
@@ -300,12 +300,12 @@ struct net_device * __init sun3_82586_probe(int unit)
 
 	if (found)
 		return ERR_PTR(-ENODEV);
-	
+
 	ioaddr = (unsigned long)ioremap(IE_OBIO, SUN3_82586_TOTAL_SIZE);
 	if (!ioaddr)
 		return ERR_PTR(-ENOMEM);
 	found = 1;
-	
+
 	dev = alloc_etherdev(sizeof(struct priv));
 	if (!dev)
 		goto out;
@@ -330,7 +330,7 @@ out2:
 out1:
 	free_netdev(dev);
 out:
-	iounmap((void *)ioaddr);
+	iounmap((void __iomem *)ioaddr);
 	return ERR_PTR(err);
 }
 
@@ -379,7 +379,7 @@ static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr)
 		((struct priv *) dev->priv)->num_recv_buffs = NUM_RECV_BUFFS_32;
 
 	printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq);
-	
+
 	dev->open		= sun3_82586_open;
 	dev->stop		= sun3_82586_close;
 	dev->get_stats		= sun3_82586_get_stats;
@@ -479,7 +479,7 @@ static int init586(struct net_device *dev)
 	/*
 	 * TDR, wire check .. e.g. no resistor e.t.c
 	 */
-	 
+
 	tdr_cmd = (struct tdr_cmd_struct *)ptr;
 
 	tdr_cmd->cmd_status	= 0;
@@ -678,7 +678,7 @@ static void *alloc_rfa(struct net_device *dev,void *ptr)
  * Interrupt Handler ...
  */
 
-static irqreturn_t sun3_82586_interrupt(int irq,void *dev_id,struct pt_regs *reg_ptr)
+static irqreturn_t sun3_82586_interrupt(int irq,void *dev_id)
 {
 	struct net_device *dev = dev_id;
 	unsigned short stat;