X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Ftlan.c;h=12076f8f942c7d40017bfefbd016f3fe5f3dc710;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=a7ffa64502dd3a2074418392e1c4e576ee81517a;hpb=6a77f38946aaee1cd85eeec6cf4229b204c15071;p=linux-2.6.git

diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index a7ffa6450..12076f8f9 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -171,6 +171,7 @@
 #include <linux/ioport.h>
 #include <linux/eisa.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
@@ -193,6 +194,12 @@ static  int aui[MAX_TLAN_BOARDS];
 static  int duplex[MAX_TLAN_BOARDS];
 static  int speed[MAX_TLAN_BOARDS];
 static  int boards_found;
+module_param_array(aui, int, NULL, 0);
+module_param_array(duplex, int, NULL, 0);
+module_param_array(speed, int, NULL, 0);
+MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)");
+MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)");
+MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)");
 
 MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>");
 MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters");
@@ -204,8 +211,13 @@ MODULE_LICENSE("GPL");
 
 /* Turn on debugging. See Documentation/networking/tlan.txt for details */
 static  int		debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "ThunderLAN debug mask");
 
 static	int		bbuf;
+module_param(bbuf, int, 0);
+MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)");
+
 static	u8		*TLanPadBuffer;
 static  dma_addr_t	TLanPadBufferDMA;
 static	char		TLanSignature[] = "TLAN";
@@ -524,6 +536,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 	u16		   device_id;
 	int		   reg, rc = -ENODEV;
 
+#ifdef CONFIG_PCI
 	if (pdev) {
 		rc = pci_enable_device(pdev);
 		if (rc)
@@ -535,6 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 			goto err_out;
 		}
 	}
+#endif  /*  CONFIG_PCI  */
 
 	dev = alloc_etherdev(sizeof(TLanPrivateInfo));
 	if (dev == NULL) {
@@ -555,7 +569,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 
 		priv->adapter = &board_info[ent->driver_data];
 
-		rc = pci_set_dma_mask(pdev, 0xFFFFFFFF);
+		rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		if (rc) {
 			printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
 			goto err_out_free_dev;
@@ -2381,6 +2395,7 @@ TLan_FinishReset( struct net_device *dev )
 		TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
 		return;
 	}
+	TLan_SetMulticastList(dev);
 
 } /* TLan_FinishReset */
 
@@ -2807,7 +2822,7 @@ void TLan_PhyMonitor( struct net_device *dev )
  	       if (priv->link) {
 		      priv->link = 0;
 	              printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
-	              dev->flags &= ~IFF_RUNNING;
+		      netif_carrier_off(dev);
 		      TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
 		      return;
 		}
@@ -2817,7 +2832,7 @@ void TLan_PhyMonitor( struct net_device *dev )
         if ((phy_status & MII_GS_LINK) && !priv->link) {
  		priv->link = 1;
         	printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
-        	dev->flags |= IFF_RUNNING;
+		netif_carrier_on(dev);
         }
 
 	/* Setup a new monitor */
@@ -2852,11 +2867,11 @@ void TLan_PhyMonitor( struct net_device *dev )
 	 *				for this device.
 	 *		phy		The address of the PHY to be queried.
 	 *		reg		The register whose contents are to be
-	 *				retreived.
+	 *				retrieved.
 	 *		val		A pointer to a variable to store the
 	 *				retrieved value.
 	 *
-	 *	This function uses the TLAN's MII bus to retreive the contents
+	 *	This function uses the TLAN's MII bus to retrieve the contents
 	 *	of a given register on a PHY.  It sends the appropriate info
 	 *	and then reads the 16-bit register value from the MII bus via
 	 *	the TLAN SIO register.