X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Ftulip%2Feeprom.c;h=206918bad539b46b12cdc184fcd3b69bb9d5a301;hb=refs%2Fheads%2Fvserver;hp=ac5bf49ff60f6bcd77a385f3755fb4da16527766;hpb=6a77f38946aaee1cd85eeec6cf4229b204c15071;p=linux-2.6.git

diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index ac5bf49ff..206918bad 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -1,7 +1,7 @@
 /*
 	drivers/net/tulip/eeprom.c
 
-	Maintained by Jeff Garzik <jgarzik@pobox.com>
+	Maintained by Valerie Henson <val_henson@linux.intel.com>
 	Copyright 2000,2001  The Linux Kernel Team
 	Written/copyright 1994-2001 by Donald Becker.
 
@@ -63,6 +63,22 @@ static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
 	 */
 	{ 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
   },
+  {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset	*/
+					 0x0000, /* 0 == high offset, 0 == gap		*/
+					 0x0800, /* Default Autoselect			*/
+					 0x8001, /* 1 leaf, extended type, bogus len	*/
+					 0x0003, /* Type 3 (MII), PHY #0		*/
+					 0x0400, /* 0 init instr, 4 reset instr		*/
+					 0x0801, /* Set control mode, GP0 output	*/
+					 0x0000, /* Drive GP0 Low (RST is active low)	*/
+					 0x0800, /* control mode, GP0 input (undriven)	*/
+					 0x0000, /* clear control mode			*/
+					 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX	*/
+					 0x01e0, /* Advertise all above			*/
+					 0x5000, /* FDX all above			*/
+					 0x1800, /* Set fast TTM in 100bt modes		*/
+					 0x0000, /* PHY cannot be unplugged		*/
+  }},
   {NULL}};
 
 
@@ -80,11 +96,11 @@ static const char *block_name[] __devinitdata = {
  * tulip_build_fake_mediatable - Build a fake mediatable entry.
  * @tp: Ptr to the tulip private data.
  *
- * Some cards like the 3x5 HSC cards (J3514A) do not have a standard 
+ * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
  * srom and can not be handled under the fixup routine.  These cards
- * still need a valid mediatable entry for correct csr12 setup and 
+ * still need a valid mediatable entry for correct csr12 setup and
  * mii handling.
- * 
+ *
  * Since this is currently a parisc-linux specific function, the
  * #ifdef __hppa__ should completely optimize this function away for
  * non-parisc hardware.
@@ -124,7 +140,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 		tp->flags |= HAS_PHY_IRQ;
 		tp->csr12_shadow = -1;
 	}
-#endif 
+#endif
 }
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)