X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Ftulip%2Fwinbond-840.c;h=002a05e0722f16bfb37941d15220349f458a9c96;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=5b1af3986abf533eae23e5384287bc9c1804b7e0;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index 5b1af3986..002a05e07 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -38,15 +38,15 @@ Copyright (C) 2001 Manfred Spraul * ethtool support (jgarzik) * Replace some MII-related magic numbers with constants (jgarzik) - + TODO: * enable pci_power_off * Wake-On-LAN */ - + #define DRV_NAME "winbond-840" -#define DRV_VERSION "1.01-d" -#define DRV_RELDATE "Nov-17-2001" +#define DRV_VERSION "1.01-e" +#define DRV_RELDATE "Sep-11-2006" /* Automatically extracted configuration info: @@ -57,7 +57,7 @@ c-help-name: Winbond W89c840 PCI Ethernet support c-help-symbol: CONFIG_WINBOND_840 c-help: This driver is for the Winbond W89c840 chip. It also works with c-help: the TX9882 chip on the Compex RL100-ATX board. -c-help: More specific information and updates are available from +c-help: More specific information and updates are available from c-help: http://www.scyld.com/network/drivers.html */ @@ -90,10 +90,8 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; Making the Tx ring too large decreases the effectiveness of channel bonding and packet priority. There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ #define TX_QUEUE_LEN_RESTART 5 -#define RX_RING_SIZE 32 #define TX_BUFLIMIT (1024-128) @@ -137,8 +135,10 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; #include #include +#include "tulip.h" + /* These identify the driver base version and may not be removed. */ -static char version[] __devinitdata = +static char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker \n" KERN_INFO " http://www.scyld.com/network/drivers.html\n"; @@ -207,58 +207,43 @@ Test with 'ping -s 10000' on a fast computer. */ - + /* PCI probe table. */ -enum pci_id_flags_bits { - /* Set PCI command register bits before calling probe1(). */ - PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, - /* Read and map the single following PCI BAR. */ - PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4, - PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400, -}; enum chip_capability_flags { - CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,}; -#ifdef USE_IO_OPS -#define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER) -#else -#define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER) -#endif + CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8, +}; -static struct pci_device_id w840_pci_tbl[] = { +static const struct pci_device_id w840_pci_tbl[] = { { 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 }, { 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, { 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, - { 0, } + { } }; MODULE_DEVICE_TABLE(pci, w840_pci_tbl); +enum { + netdev_res_size = 128, /* size of PCI BAR resource */ +}; + struct pci_id_info { const char *name; - struct match_info { - int pci, pci_mask, subsystem, subsystem_mask; - int revision, revision_mask; /* Only 8 bits. */ - } id; - enum pci_id_flags_bits pci_flags; - int io_size; /* Needed for I/O region check or ioremap(). */ - int drv_flags; /* Driver use, intended as capability flags. */ + int drv_flags; /* Driver use, intended as capability flags. */ }; -static struct pci_id_info pci_id_tbl[] = { - {"Winbond W89c840", /* Sometime a Level-One switch card. */ - { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 }, - W840_FLAGS, 128, CanHaveMII | HasBrokenTx | FDXOnNoMII}, - {"Winbond W89c840", { 0x08401050, 0xffffffff, }, - W840_FLAGS, 128, CanHaveMII | HasBrokenTx}, - {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,}, - W840_FLAGS, 128, CanHaveMII | HasBrokenTx}, - {NULL,}, /* 0 terminated list. */ + +static const struct pci_id_info pci_id_tbl[] __devinitdata = { + { /* Sometime a Level-One switch card. */ + "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII}, + { "Winbond W89c840", CanHaveMII | HasBrokenTx}, + { "Compex RL100-ATX", CanHaveMII | HasBrokenTx}, + { } /* terminate list. */ }; /* This driver was written to use PCI memory space, however some x86 systems - work only with I/O space accesses. Pass -DUSE_IO_OPS to use PCI I/O space - accesses instead of memory space. */ + work only with I/O space accesses. See CONFIG_TULIP_MMIO in .config +*/ /* Offsets to the Command and Status Registers, "CSRs". While similar to the Tulip, these registers are longword aligned. @@ -276,21 +261,11 @@ enum w840_offsets { CurTxDescAddr=0x4C, CurTxBufAddr=0x50, }; -/* Bits in the interrupt status/enable registers. */ -/* The bits in the Intr Status/Enable registers, mostly interrupt sources. */ -enum intr_status_bits { - NormalIntr=0x10000, AbnormalIntr=0x8000, - IntrPCIErr=0x2000, TimerInt=0x800, - IntrRxDied=0x100, RxNoBuf=0x80, IntrRxDone=0x40, - TxFIFOUnderflow=0x20, RxErrIntr=0x10, - TxIdle=0x04, IntrTxStopped=0x02, IntrTxDone=0x01, -}; - /* Bits in the NetworkConfig register. */ enum rx_mode_bits { - AcceptErr=0x80, AcceptRunt=0x40, - AcceptBroadcast=0x20, AcceptMulticast=0x10, - AcceptAllPhys=0x08, AcceptMyPhys=0x02, + AcceptErr=0x80, + RxAcceptBroadcast=0x20, AcceptMulticast=0x10, + RxAcceptAllPhys=0x08, AcceptMyPhys=0x02, }; enum mii_reg_bits { @@ -312,13 +287,6 @@ struct w840_tx_desc { u32 buffer1, buffer2; }; -/* Bits in network_desc.status */ -enum desc_status_bits { - DescOwn=0x80000000, DescEndRing=0x02000000, DescUseLink=0x01000000, - DescWholePkt=0x60000000, DescStartPkt=0x20000000, DescEndPkt=0x40000000, - DescIntr=0x80000000, -}; - #define MII_CNT 1 /* winbond only supports one MII */ struct netdev_private { struct w840_rx_desc *rx_ring; @@ -364,17 +332,17 @@ static void tx_timeout(struct net_device *dev); static int alloc_ringdesc(struct net_device *dev); static void free_ringdesc(struct netdev_private *np); static int start_tx(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *regs); +static irqreturn_t intr_handler(int irq, void *dev_instance); static void netdev_error(struct net_device *dev, int intr_status); static int netdev_rx(struct net_device *dev); static u32 __set_rx_mode(struct net_device *dev); static void set_rx_mode(struct net_device *dev); static struct net_device_stats *get_stats(struct net_device *dev); static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static struct ethtool_ops netdev_ethtool_ops; +static const struct ethtool_ops netdev_ethtool_ops; static int netdev_close(struct net_device *dev); - + static int __devinit w840_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) @@ -386,7 +354,6 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, int irq; int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0; void __iomem *ioaddr; - int bar = 1; i = pci_enable_device(pdev); if (i) return i; @@ -408,10 +375,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, if (pci_request_regions(pdev, DRV_NAME)) goto err_out_netdev; -#ifdef USE_IO_OPS - bar = 0; -#endif - ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size); + + ioaddr = pci_iomap(pdev, TULIP_BAR, netdev_res_size); if (!ioaddr) goto err_out_free_res; @@ -434,7 +399,7 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, np->mii_if.mdio_read = mdio_read; np->mii_if.mdio_write = mdio_write; np->base_addr = ioaddr; - + pci_set_drvdata(pdev, dev); if (dev->mem_start) @@ -510,7 +475,7 @@ err_out_netdev: return -ENODEV; } - + /* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. These are often serial bit streams generated by the host processor. The example below is for the common 93c46 EEPROM, 64 16 bit words. */ @@ -660,7 +625,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val return; } - + static int netdev_open(struct net_device *dev) { struct netdev_private *np = netdev_priv(dev); @@ -670,7 +635,7 @@ static int netdev_open(struct net_device *dev) iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */ netif_device_detach(dev); - i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev); + i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev); if (i) goto out_err; @@ -731,7 +696,7 @@ static int update_link(struct net_device *dev) dev->name, np->phys[0]); netif_carrier_on(dev); } - + if ((np->mii & ~0xf) == MII_DAVICOM_DM9101) { /* If the link partner doesn't support autonegotiation * the MII detects it's abilities with the "parallel detection". @@ -761,7 +726,7 @@ static int update_link(struct net_device *dev) result |= 0x20000000; if (result != np->csr6 && debug) printk(KERN_INFO "%s: Setting %dMBit-%s-duplex based on MII#%d\n", - dev->name, fasteth ? 100 : 10, + dev->name, fasteth ? 100 : 10, duplex ? "full" : "half", np->phys[0]); return result; } @@ -850,10 +815,10 @@ static void init_rxtx_rings(struct net_device *dev) break; skb->dev = dev; /* Mark as being used by this device. */ np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data, - skb->len,PCI_DMA_FROMDEVICE); + np->rx_buf_sz,PCI_DMA_FROMDEVICE); np->rx_ring[i].buffer1 = np->rx_addr[i]; - np->rx_ring[i].status = DescOwn; + np->rx_ring[i].status = DescOwned; } np->cur_rx = 0; @@ -938,7 +903,7 @@ static void init_registers(struct net_device *dev) } #elif defined(__powerpc__) || defined(__i386__) || defined(__alpha__) || defined(__ia64__) || defined(__x86_64__) i |= 0xE000; -#elif defined(__sparc__) +#elif defined(__sparc__) || defined (CONFIG_PARISC) i |= 0x4800; #else #warning Processor architecture undefined @@ -947,7 +912,7 @@ static void init_registers(struct net_device *dev) iowrite32(i, ioaddr + PCIBusCfg); np->csr6 = 0; - /* 128 byte Tx threshold; + /* 128 byte Tx threshold; Transmit on; Receive on; */ update_csr6(dev, 0x00022002 | update_link(dev) | __set_rx_mode(dev)); @@ -1058,11 +1023,11 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) /* Now acquire the irq spinlock. * The difficult race is the the ordering between - * increasing np->cur_tx and setting DescOwn: + * increasing np->cur_tx and setting DescOwned: * - if np->cur_tx is increased first the interrupt * handler could consider the packet as transmitted - * since DescOwn is cleared. - * - If DescOwn is set first the NIC could report the + * since DescOwned is cleared. + * - If DescOwned is set first the NIC could report the * packet as sent, but the interrupt handler would ignore it * since the np->cur_tx was not yet increased. */ @@ -1070,7 +1035,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) np->cur_tx++; wmb(); /* flush length, buffer1, buffer2 */ - np->tx_ring[entry].status = DescOwn; + np->tx_ring[entry].status = DescOwned; wmb(); /* flush status and kick the hardware */ iowrite32(0, np->base_addr + TxStartDemand); np->tx_q_bytes += skb->len; @@ -1145,7 +1110,7 @@ static void netdev_tx_done(struct net_device *dev) /* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */ -static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs) +static irqreturn_t intr_handler(int irq, void *dev_instance) { struct net_device *dev = (struct net_device *)dev_instance; struct netdev_private *np = netdev_priv(dev); @@ -1170,12 +1135,12 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs handled = 1; - if (intr_status & (IntrRxDone | RxNoBuf)) + if (intr_status & (RxIntr | RxNoBuf)) netdev_rx(dev); if (intr_status & RxNoBuf) iowrite32(0, ioaddr + RxStartDemand); - if (intr_status & (TxIdle | IntrTxDone) && + if (intr_status & (TxNoBuf | TxIntr) && np->cur_tx != np->dirty_tx) { spin_lock(&np->lock); netdev_tx_done(dev); @@ -1183,8 +1148,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs } /* Abnormal error summary/uncommon events handlers. */ - if (intr_status & (AbnormalIntr | TxFIFOUnderflow | IntrPCIErr | - TimerInt | IntrTxStopped)) + if (intr_status & (AbnormalIntr | TxFIFOUnderflow | SytemError | + TimerInt | TxDied)) netdev_error(dev, intr_status); if (--work_limit < 0) { @@ -1316,11 +1281,11 @@ static int netdev_rx(struct net_device *dev) skb->dev = dev; /* Mark as being used by this device. */ np->rx_addr[entry] = pci_map_single(np->pci_dev, skb->data, - skb->len, PCI_DMA_FROMDEVICE); + np->rx_buf_sz, PCI_DMA_FROMDEVICE); np->rx_ring[entry].buffer1 = np->rx_addr[entry]; } wmb(); - np->rx_ring[entry].status = DescOwn; + np->rx_ring[entry].status = DescOwned; } return 0; @@ -1357,7 +1322,7 @@ static void netdev_error(struct net_device *dev, int intr_status) dev->name, new); update_csr6(dev, new); } - if (intr_status & IntrRxDied) { /* Missed a Rx frame. */ + if (intr_status & RxDied) { /* Missed a Rx frame. */ np->stats.rx_errors++; } if (intr_status & TimerInt) { @@ -1393,16 +1358,14 @@ static u32 __set_rx_mode(struct net_device *dev) u32 rx_mode; if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - /* Unconditionally log net taps. */ - printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAllPhys + rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys | AcceptMyPhys; } else if ((dev->mc_count > multicast_filter_limit) || (dev->flags & IFF_ALLMULTI)) { /* Too many to match, or accept all multicasts. */ memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; } else { struct dev_mc_list *mclist; int i; @@ -1413,7 +1376,7 @@ static u32 __set_rx_mode(struct net_device *dev) filterbit &= 0x3f; mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); } - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys; } iowrite32(mc_filter[0], ioaddr + MulticastFilter0); iowrite32(mc_filter[1], ioaddr + MulticastFilter1); @@ -1484,7 +1447,7 @@ static void netdev_set_msglevel(struct net_device *dev, u32 value) debug = value; } -static struct ethtool_ops netdev_ethtool_ops = { +static const struct ethtool_ops netdev_ethtool_ops = { .get_drvinfo = netdev_get_drvinfo, .get_settings = netdev_get_settings, .set_settings = netdev_set_settings, @@ -1584,7 +1547,7 @@ static int netdev_close(struct net_device *dev) static void __devexit w840_remove1 (struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - + if (dev) { struct netdev_private *np = netdev_priv(dev); unregister_netdev(dev); @@ -1605,11 +1568,11 @@ static void __devexit w840_remove1 (struct pci_dev *pdev) * - get_stats: * spin_lock_irq(np->lock), doesn't touch hw if not present * - hard_start_xmit: - * netif_stop_queue + spin_unlock_wait(&dev->xmit_lock); + * synchronize_irq + netif_tx_disable; * - tx_timeout: - * netif_device_detach + spin_unlock_wait(&dev->xmit_lock); + * netif_device_detach + netif_tx_disable; * - set_multicast_list - * netif_device_detach + spin_unlock_wait(&dev->xmit_lock); + * netif_device_detach + netif_tx_disable; * - interrupt handler * doesn't touch hw if not present, synchronize_irq waits for * running instances of the interrupt handler. @@ -1635,17 +1598,16 @@ static int w840_suspend (struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); update_csr6(dev, 0); iowrite32(0, ioaddr + IntrEnable); - netif_stop_queue(dev); spin_unlock_irq(&np->lock); - spin_unlock_wait(&dev->xmit_lock); synchronize_irq(dev->irq); - + netif_tx_disable(dev); + np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff; /* no more hardware accesses behind this line. */ - if (np->csr6) BUG(); + BUG_ON(np->csr6); if (ioread32(ioaddr + IntrEnable)) BUG(); /* pci_power_off(pdev, -1); */ @@ -1662,14 +1624,18 @@ static int w840_resume (struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata (pdev); struct netdev_private *np = netdev_priv(dev); + int retval = 0; rtnl_lock(); if (netif_device_present(dev)) goto out; /* device not suspended */ if (netif_running(dev)) { - pci_enable_device(pdev); - /* pci_power_on(pdev); */ - + if ((retval = pci_enable_device(pdev))) { + printk (KERN_ERR + "%s: pci_enable_device failed in resume\n", + dev->name); + goto out; + } spin_lock_irq(&np->lock); iowrite32(1, np->base_addr+PCIBusCfg); ioread32(np->base_addr+PCIBusCfg); @@ -1687,7 +1653,7 @@ static int w840_resume (struct pci_dev *pdev) } out: rtnl_unlock(); - return 0; + return retval; } #endif @@ -1705,7 +1671,7 @@ static struct pci_driver w840_driver = { static int __init w840_init(void) { printk(version); - return pci_module_init(&w840_driver); + return pci_register_driver(&w840_driver); } static void __exit w840_exit(void)