X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fwan%2FKconfig;h=21f76f51c95e4efd26c4466330e74a63d322f42d;hb=refs%2Fheads%2Fvserver;hp=03eeaebbf5d16941b571ab8db7cfe991f04b34a4;hpb=9bf4aaab3e101692164d49b7ca357651eb691cb6;p=linux-2.6.git
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 03eeaebbf..21f76f51c 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -26,7 +26,7 @@ config WAN
# There is no way to detect a comtrol sv11 - force it modular for now.
config HOSTESS_SV11
tristate "Comtrol Hostess SV-11 support"
- depends on WAN && ISA && m
+ depends on WAN && ISA && m && ISA_DMA_API
help
Driver for Comtrol Hostess SV-11 network card which
operates on low speed synchronous serial links at up to
@@ -38,7 +38,7 @@ config HOSTESS_SV11
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
- depends on WAN && ISA && m
+ depends on WAN && ISA && m && ISA_DMA_API
---help---
Driver for COSA and SRP synchronous serial boards.
@@ -57,44 +57,6 @@ config COSA
The driver will be compiled as a module: the
module will be called cosa.
-config DSCC4
- tristate "Etinc PCISYNC serial board support"
- depends on WAN && PCI && m
- help
- Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
- DSCC4 chipset.
-
- This is supposed to work with the four port card. Take a look at
- for further information about the
- driver.
-
- To compile this driver as a module, choose M here: the
- module will be called dscc4.
-
-config DSCC4_PCISYNC
- bool "Etinc PCISYNC features"
- depends on DSCC4
- help
- Due to Etinc's design choice for its PCISYNC cards, some operations
- are only allowed on specific ports of the DSCC4. This option is the
- only way for the driver to know that it shouldn't return a success
- code for these operations.
-
- Please say Y if your card is an Etinc's PCISYNC.
-
-config DSCC4_PCI_RST
- bool "Hard reset support"
- depends on DSCC4
- help
- Various DSCC4 bugs forbid any reliable software reset of the ASIC.
- As a replacement, some vendors provide a way to assert the PCI #RST
- pin of DSCC4 through the GPIO port of the card. If you choose Y,
- the driver will make use of this feature before module removal
- (i.e. rmmod). The feature is known to be available on Commtech's
- cards. Contact your manufacturer for details.
-
- Say Y if your card supports this feature.
-
#
# Lan Media's board. Currently 1000, 1200, 5200, 5245
#
@@ -109,7 +71,7 @@ config LANMEDIA
V.24, V.35 or V.36 interface) to your Linux box.
- LMC 1200 with on board DSU board allows you to connect your Linux
- box dirrectly to a T1 or E1 circuit.
+ box directly to a T1 or E1 circuit.
- LMC 5200 board provides a HSSI interface capable of running up to
52 Mbits per second.
@@ -127,25 +89,13 @@ config LANMEDIA
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && ISA && m
+ depends on WAN && ISA && m && ISA_DMA_API && INET
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
The driver will be compiled as a module: the
module will be called sealevel.
-config SYNCLINK_SYNCPPP
- tristate "SyncLink HDLC/SYNCPPP support"
- depends on WAN
- help
- Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
-
- Normally the SyncLink WAN driver works with the main PPP driver
- and pppd program.
- HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
- . The SyncLink WAN driver (in
- character devices) must also be enabled.
-
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
@@ -155,7 +105,8 @@ config HDLC
Network) card supported by this driver and you are planning to
connect the box to a WAN.
- You will need supporting software from .
+ You will need supporting software from
+ .
Generic HDLC driver currently supports raw HDLC, Cisco HDLC, Frame
Relay, synchronous Point-to-Point Protocol (PPP) and X.25.
@@ -165,7 +116,7 @@ config HDLC
If unsure, say N.
config HDLC_RAW
- bool "Raw HDLC support"
+ tristate "Raw HDLC support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC over WAN connections.
@@ -173,7 +124,7 @@ config HDLC_RAW
If unsure, say N.
config HDLC_RAW_ETH
- bool "Raw HDLC Ethernet device support"
+ tristate "Raw HDLC Ethernet device support"
depends on HDLC
help
Generic HDLC driver supporting raw HDLC Ethernet device emulation
@@ -184,7 +135,7 @@ config HDLC_RAW_ETH
If unsure, say N.
config HDLC_CISCO
- bool "Cisco HDLC support"
+ tristate "Cisco HDLC support"
depends on HDLC
help
Generic HDLC driver supporting Cisco HDLC over WAN connections.
@@ -192,7 +143,7 @@ config HDLC_CISCO
If unsure, say N.
config HDLC_FR
- bool "Frame Relay support"
+ tristate "Frame Relay support"
depends on HDLC
help
Generic HDLC driver supporting Frame Relay over WAN connections.
@@ -200,7 +151,7 @@ config HDLC_FR
If unsure, say N.
config HDLC_PPP
- bool "Synchronous Point-to-Point Protocol (PPP) support"
+ tristate "Synchronous Point-to-Point Protocol (PPP) support"
depends on HDLC
help
Generic HDLC driver supporting PPP over WAN connections.
@@ -208,7 +159,7 @@ config HDLC_PPP
If unsure, say N.
config HDLC_X25
- bool "X.25 protocol support"
+ tristate "X.25 protocol support"
depends on HDLC && (LAPB=m && HDLC=m || LAPB=y)
help
Generic HDLC driver supporting X.25 over WAN connections.
@@ -225,7 +176,7 @@ config PCI200SYN
Driver for PCI200SYN cards by Goramo sp. j.
If you have such a card, say Y here and see
- .
+ .
To compile this as a module, choose M here: the
module will be called pci200syn.
@@ -239,7 +190,7 @@ config WANXL
Driver for wanXL PCI cards by SBE Inc.
If you have such a card, say Y here and see
- .
+ .
To compile this as a module, choose M here: the
module will be called wanxl.
@@ -292,7 +243,7 @@ config N2
SDL Communications Inc.
If you have such a card, say Y here and see
- .
+ .
Note that N2csu and N2dds cards are not supported by this driver.
@@ -308,7 +259,7 @@ config C101
Driver for C101 SuperSync ISA cards by Moxa Technologies Co., Ltd.
If you have such a card, say Y here and see
-
+ .
To compile this driver as a module, choose M here: the
module will be called c101.
@@ -334,6 +285,44 @@ config FARSYNC
To compile this driver as a module, choose M here: the
module will be called farsync.
+config DSCC4
+ tristate "Etinc PCISYNC serial board support"
+ depends on HDLC && PCI && m
+ help
+ Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
+ DSCC4 chipset.
+
+ This is supposed to work with the four port card. Take a look at
+ for further information about the
+ driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dscc4.
+
+config DSCC4_PCISYNC
+ bool "Etinc PCISYNC features"
+ depends on DSCC4
+ help
+ Due to Etinc's design choice for its PCISYNC cards, some operations
+ are only allowed on specific ports of the DSCC4. This option is the
+ only way for the driver to know that it shouldn't return a success
+ code for these operations.
+
+ Please say Y if your card is an Etinc's PCISYNC.
+
+config DSCC4_PCI_RST
+ bool "Hard reset support"
+ depends on DSCC4
+ help
+ Various DSCC4 bugs forbid any reliable software reset of the ASIC.
+ As a replacement, some vendors provide a way to assert the PCI #RST
+ pin of DSCC4 through the GPIO port of the card. If you choose Y,
+ the driver will make use of this feature before module removal
+ (i.e. rmmod). The feature is known to be available on Commtech's
+ cards. Contact your manufacturer for details.
+
+ Say Y if your card supports this feature.
+
config DLCI
tristate "Frame Relay DLCI support"
depends on WAN
@@ -393,7 +382,7 @@ config SDLA
# Wan router core.
config WAN_ROUTER_DRIVERS
- bool "WAN router drivers"
+ tristate "WAN router drivers"
depends on WAN && WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
@@ -404,108 +393,12 @@ config WAN_ROUTER_DRIVERS
.
Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
+ kernel except for how subordinate drivers may be built:
+ saying N will just cause the configurator to skip all
the questions about WAN router drivers.
If unsure, say N.
-config VENDOR_SANGOMA
- tristate "Sangoma WANPIPE(tm) multiprotocol cards"
- depends on WAN_ROUTER_DRIVERS && WAN_ROUTER && (PCI || ISA) && BROKEN
- ---help---
- Driver for S514-PCI/ISA Synchronous Data Link Adapters (SDLA).
-
- WANPIPE from Sangoma Technologies Inc.
- is a family of intelligent multiprotocol WAN adapters with data
- transfer rates up to 4Mbps. Cards support:
-
- - X.25, Frame Relay, PPP, Cisco HDLC protocols.
-
- - API for protocols like HDLC (LAPB), HDLC Streaming, X.25,
- Frame Relay and BiSync.
-
- - Ethernet Bridging over Frame Relay protocol.
-
- - MULTILINK PPP
-
- - Async PPP (Modem Dialup)
-
- The next questions will ask you about the protocols you want
- the driver to support.
-
- If you have one or more of these cards, say M to this option;
- and read .
-
- To compile this driver as a module, choose M here: the
- module will be called wanpipe.
-
-config WANPIPE_CHDLC
- bool "WANPIPE Cisco HDLC support"
- depends on VENDOR_SANGOMA
- ---help---
- Connect a WANPIPE card to a leased line using the Cisco HDLC.
-
- - Supports Dual Port Cisco HDLC on the S514-PCI/S508-ISA cards
- which allows user to build applications using the HDLC streaming API.
-
- - CHDLC Streaming MULTILINK PPP that can bind multiple WANPIPE T1
- cards into a single logical channel.
-
- Say Y and the Cisco HDLC support, HDLC streaming API and
- MULTILINK PPP will be included in the driver.
-
-config WANPIPE_FR
- bool "WANPIPE Frame Relay support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to a Frame Relay network, or use Frame Felay
- API to develope custom applications.
-
- Contains the Ethernet Bridging over Frame Relay feature, where
- a WANPIPE frame relay link can be directly connected to the Linux
- kernel bridge. The Frame Relay option is supported on S514-PCI
- and S508-ISA cards.
-
- Say Y and the Frame Relay support will be included in the driver.
-
-config WANPIPE_X25
- bool "WANPIPE X.25 support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to an X.25 network.
-
- Includes the X.25 API support for custom applications over the
- X.25 protocol. The X.25 option is supported on S514-PCI and
- S508-ISA cards.
-
- Say Y and the X.25 support will be included in the driver.
-
-config WANPIPE_PPP
- bool "WANPIPE PPP support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to a leased line using Point-to-Point
- Protocol (PPP).
-
- The PPP option is supported on S514-PCI/S508-ISA cards.
-
- Say Y and the PPP support will be included in the driver.
-
-config WANPIPE_MULTPPP
- bool "WANPIPE Multi-Port PPP support"
- depends on VENDOR_SANGOMA
- help
- Connect a WANPIPE card to a leased line using Point-to-Point
- Protocol (PPP).
-
- Uses in-kernel SyncPPP protocol over the Sangoma HDLC Streaming
- adapter. In this case each Sangoma adapter port can support an
- independent PPP connection. For example, a single Quad-Port PCI
- adapter can support up to four independent PPP links. The PPP
- option is supported on S514-PCI/S508-ISA cards.
-
- Say Y and the Multi-Port PPP support will be included in the driver.
-
config CYCLADES_SYNC
tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
depends on WAN_ROUTER_DRIVERS && (PCI || ISA)