X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fhermes.c;h=29d39105f5b869a4a59be436e41ab2015a3c822e;hb=refs%2Fremotes%2Fvserver;hp=346c6febb033b89e217591819727e21ae62ecc43;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index 346c6febb..29d39105f 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -38,7 +38,6 @@
  * under either the MPL or the GPL.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -121,12 +120,6 @@ void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
 	hw->iobase = address;
 	hw->reg_spacing = reg_spacing;
 	hw->inten = 0x0;
-
-#ifdef HERMES_DEBUG_BUFFER
-	hw->dbufp = 0;
-	memset(&hw->dbuf, 0xff, sizeof(hw->dbuf));
-	memset(&hw->profile, 0, sizeof(hw->profile));
-#endif
 }
 
 int hermes_init(hermes_t *hw)
@@ -347,19 +340,6 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
 		reg = hermes_read_reg(hw, oreg);
 	}
 
-#ifdef HERMES_DEBUG_BUFFER
-	hw->profile[HERMES_BAP_BUSY_TIMEOUT - k]++;
-
-	if (k < HERMES_BAP_BUSY_TIMEOUT) {
-		struct hermes_debug_entry *e = 
-			&hw->dbuf[(hw->dbufp++) % HERMES_DEBUG_BUFSIZE];
-		e->bap = bap;
-		e->id = id;
-		e->offset = offset;
-		e->cycles = HERMES_BAP_BUSY_TIMEOUT - k;
-	}
-#endif
-
 	if (reg & HERMES_OFFSET_BUSY)
 		return -ETIMEDOUT;
 
@@ -419,8 +399,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
 }
 
 /* Write a block of data to the chip's buffer, via the
- * BAP. Synchronization/serialization is the caller's problem. len
- * must be even.
+ * BAP. Synchronization/serialization is the caller's problem.
  *
  * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
  */
@@ -430,7 +409,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
 	int err = 0;
 
-	if ( (len < 0) || (len % 2) )
+	if (len < 0)
 		return -EINVAL;
 
 	err = hermes_bap_seek(hw, bap, id, offset);
@@ -438,49 +417,12 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
 		goto out;
 	
 	/* Actually do the transfer */
-	hermes_write_words(hw, dreg, buf, len/2);
+	hermes_write_bytes(hw, dreg, buf, len);
 
  out:	
 	return err;
 }
 
-/* Write a block of data to the chip's buffer with padding if
- * neccessary, via the BAP. Synchronization/serialization is the
- * caller's problem. len must be even.
- *
- * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
- */
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
-		      u16 id, u16 offset)
-{
-	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
-	int err = 0;
-
-	if (len < 0 || len % 2 || data_len > len)
-		return -EINVAL;
-
-	err = hermes_bap_seek(hw, bap, id, offset);
-	if (err)
-		goto out;
-
-	/* Transfer all the complete words of data */
-	hermes_write_words(hw, dreg, buf, data_len/2);
-	/* If there is an odd byte left over pad and transfer it */
-	if (data_len & 1) {
-		u8 end[2];
-		end[1] = 0;
-		end[0] = ((unsigned char *)buf)[data_len - 1];
-		hermes_write_words(hw, dreg, end, 1);
-		data_len ++;
-	}
-	/* Now send zeros for the padding */
-	if (data_len < len)
-		hermes_clear_words(hw, dreg, (len - data_len) / 2);
-	/* Complete */
- out:
-	return err;
-}
-
 /* Read a Length-Type-Value record from the card.
  *
  * If length is NULL, we ignore the length read from the card, and
@@ -553,7 +495,7 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
 
 	count = length - 1;
 
-	hermes_write_words(hw, dreg, value, count);
+	hermes_write_bytes(hw, dreg, value, count << 1);
 
 	err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE, 
 				rid, NULL);
@@ -568,7 +510,6 @@ EXPORT_SYMBOL(hermes_allocate);
 
 EXPORT_SYMBOL(hermes_bap_pread);
 EXPORT_SYMBOL(hermes_bap_pwrite);
-EXPORT_SYMBOL(hermes_bap_pwrite_pad);
 EXPORT_SYMBOL(hermes_read_ltv);
 EXPORT_SYMBOL(hermes_write_ltv);