X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fprism54%2Fislpci_dev.c;h=f057fd9fcd79edcf2288451ec21c51aa09ad3f6b;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=efab07e9e24e0a37cfa624b57aa49060c9432e39;hpb=f7f1b0f1e2fbadeab12d24236000e778aa9b1ead;p=linux-2.6.git

diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index efab07e9e..f057fd9fc 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -1,5 +1,4 @@
 /*
- *  
  *  Copyright (C) 2002 Intersil Americas Inc.
  *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
  *  Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
@@ -19,7 +18,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 
 #include <linux/netdevice.h>
@@ -183,7 +181,7 @@ isl_upload_firmware(islpci_private *priv)
 ******************************************************************************/
 
 irqreturn_t
-islpci_interrupt(int irq, void *config, struct pt_regs *regs)
+islpci_interrupt(int irq, void *config)
 {
 	u32 reg;
 	islpci_private *priv = config;
@@ -414,7 +412,7 @@ prism54_bring_down(islpci_private *priv)
 	islpci_set_state(priv, PRV_STATE_PREBOOT);
 
 	/* disable all device interrupts in case they weren't */
-	isl38xx_disable_interrupts(priv->device_base);  
+	isl38xx_disable_interrupts(priv->device_base);
 
 	/* For safety reasons, we may want to ensure that no DMA transfer is
 	 * currently in progress by emptying the TX and RX queues. */
@@ -439,8 +437,7 @@ prism54_bring_down(islpci_private *priv)
 	wmb();
 
 	/* wait a while for the device to reset */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(50*HZ/1000);
+	schedule_timeout_uninterruptible(msecs_to_jiffies(50));
 
 	return 0;
 }
@@ -482,7 +479,7 @@ islpci_reset_if(islpci_private *priv)
 
 	DEFINE_WAIT(wait);
 	prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE);
-	
+
 	/* now the last step is to reset the interface */
 	isl38xx_interface_reset(priv->device_base, priv->device_host_address);
 	islpci_set_state(priv, PRV_STATE_PREINIT);
@@ -490,16 +487,15 @@ islpci_reset_if(islpci_private *priv)
         for(count = 0; count < 2 && result; count++) {
 		/* The software reset acknowledge needs about 220 msec here.
 		 * Be conservative and wait for up to one second. */
-	
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		remaining = schedule_timeout(HZ);
+
+		remaining = schedule_timeout_uninterruptible(HZ);
 
 		if(remaining > 0) {
 			result = 0;
 			break;
 		}
 
-		/* If we're here it's because our IRQ hasn't yet gone through. 
+		/* If we're here it's because our IRQ hasn't yet gone through.
 		 * Retry a bit more...
 		 */
 		printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n",
@@ -517,7 +513,7 @@ islpci_reset_if(islpci_private *priv)
 
 	/* Now that the device is 100% up, let's allow
 	 * for the other interrupts --
-	 * NOTE: this is not *yet* true since we've only allowed the 
+	 * NOTE: this is not *yet* true since we've only allowed the
 	 * INIT interrupt on the IRQ line. We can perhaps poll
 	 * the IRQ line until we know for sure the reset went through */
 	isl38xx_enable_common_interrupts(priv->device_base);
@@ -718,8 +714,8 @@ islpci_alloc_memory(islpci_private *priv)
 	}
 
 	prism54_acl_init(&priv->acl);
-	prism54_wpa_ie_init(priv);
-	if (mgt_init(priv)) 
+	prism54_wpa_bss_ie_init(priv);
+	if (mgt_init(priv))
 		goto out_free;
 
 	return 0;
@@ -756,8 +752,7 @@ islpci_free_memory(islpci_private *priv)
 			pci_unmap_single(priv->pdev, buf->pci_addr,
 					 buf->size, PCI_DMA_FROMDEVICE);
 		buf->pci_addr = 0;
-		if (buf->mem)
-			kfree(buf->mem);
+		kfree(buf->mem);
 		buf->size = 0;
 		buf->mem = NULL;
         }
@@ -778,7 +773,7 @@ islpci_free_memory(islpci_private *priv)
 
 	/* Free the acces control list and the WPA list */
 	prism54_acl_clean(&priv->acl);
-	prism54_wpa_ie_clean(priv);
+	prism54_wpa_bss_ie_clean(priv);
 	mgt_clean(priv);
 
 	return 0;
@@ -815,7 +810,6 @@ islpci_setup(struct pci_dev *pdev)
 	ndev->open = &islpci_open;
 	ndev->stop = &islpci_close;
 	ndev->get_stats = &islpci_statistics;
-	ndev->get_wireless_stats = &prism54_get_wireless_stats;
 	ndev->do_ioctl = &prism54_ioctl;
 	ndev->wireless_handlers =
 	    (struct iw_handler_def *) &prism54_handler_def;
@@ -840,11 +834,9 @@ islpci_setup(struct pci_dev *pdev)
 	priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
 		priv->monitor_type : ARPHRD_ETHER;
 
-#if WIRELESS_EXT > 16
 	/* Add pointers to enable iwspy support. */
 	priv->wireless_data.spy_data = &priv->spy_data;
 	ndev->wireless_data = &priv->wireless_data;
-#endif /* WIRELESS_EXT > 16 */
 
 	/* save the start and end address of the PCI memory area */
 	ndev->mem_start = (unsigned long) priv->device_base;
@@ -868,11 +860,10 @@ islpci_setup(struct pci_dev *pdev)
 	priv->state_off = 1;
 
 	/* initialize workqueue's */
-	INIT_WORK(&priv->stats_work,
-		  (void (*)(void *)) prism54_update_stats, priv);
+	INIT_WORK(&priv->stats_work, prism54_update_stats);
 	priv->stats_timestamp = 0;
 
-	INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake, priv);
+	INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake);
 	priv->reset_task_pending = 0;
 
 	/* allocate various memory areas */