X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fnet%2Fzorro8390.c;h=8037e5806d0a48b33a28815cdd828cb90cfe77eb;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=d721fc6f486a8f16bf2957a17853f8495dbfd500;hpb=5273a3df6485dc2ad6aa7ddd441b9a21970f003b;p=linux-2.6.git

diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index d721fc6f4..8037e5806 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -27,6 +27,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/zorro.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
@@ -36,6 +37,8 @@
 #include "8390.h"
 
 
+#define DRV_NAME	"zorro8390"
+
 #define NE_BASE		(dev->base_addr)
 #define NE_CMD		(0x00*2)
 #define NE_DATAPORT	(0x10*2)	/* NatSemi-defined port window offset. */
@@ -115,7 +118,7 @@ static int __devinit zorro8390_init_one(struct zorro_dev *z,
     if (!dev)
 	return -ENOMEM;
     SET_MODULE_OWNER(dev);
-    if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, dev->name)) {
+    if (!request_mem_region(ioaddr, NE_IO_EXTENT*2, DRV_NAME)) {
 	free_netdev(dev);
 	return -EBUSY;
     }
@@ -149,7 +152,7 @@ static int __devinit zorro8390_init(struct net_device *dev,
 	z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
 
 	while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
-	    if (jiffies - reset_start_time > 2*HZ/100) {
+	    if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 		printk(KERN_WARNING " not found (no reset ack).\n");
 		return -ENODEV;
 	    }
@@ -198,7 +201,7 @@ static int __devinit zorro8390_init(struct net_device *dev,
     dev->irq = IRQ_AMIGA_PORTS;
 
     /* Install the Interrupt handler */
-    i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, dev->name, dev);
+    i = request_irq(IRQ_AMIGA_PORTS, ei_interrupt, SA_SHIRQ, DRV_NAME, dev);
     if (i) return i;
 
     for(i = 0; i < ETHER_ADDR_LEN; i++) {
@@ -271,7 +274,7 @@ static void zorro8390_reset_8390(struct net_device *dev)
 
     /* This check _should_not_ be necessary, omit eventually. */
     while ((z_readb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
-	if (jiffies - reset_start_time > 2*HZ/100) {
+	if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 	    printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n",
 		   dev->name);
 	    break;
@@ -398,7 +401,7 @@ static void zorro8390_block_output(struct net_device *dev, int count,
     dma_start = jiffies;
 
     while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
-	if (jiffies - dma_start > 2*HZ/100) {		/* 20ms */
+	if (time_after(jiffies, dma_start + 2*HZ/100)) {	/* 20ms */
 		printk(KERN_ERR "%s: timeout waiting for Tx RDC.\n",
 		       dev->name);
 		zorro8390_reset_8390(dev);
@@ -423,7 +426,7 @@ static void __devexit zorro8390_remove_one(struct zorro_dev *z)
 
 static int __init zorro8390_init_module(void)
 {
-    return zorro_module_init(&zorro8390_driver);
+    return zorro_register_driver(&zorro8390_driver);
 }
 
 static void __exit zorro8390_cleanup_module(void)