X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;fp=drivers%2Fscsi%2FKconfig;h=da70464f1fdbc72f59bfbc6e4ea28d573e766236;hb=64ba3f394c830ec48a1c31b53dcae312c56f1604;hp=96a81cd17617aaa95fe7bad50875488182f65081;hpb=be1e6109ac94a859551f8e1774eb9a8469fe055c;p=linux-2.6.git

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 96a81cd17..da70464f1 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -379,14 +379,6 @@ config SCSI_AHA1740
 config SCSI_AACRAID
 	tristate "Adaptec AACRAID support"
 	depends on SCSI && PCI
-	help
-	  This driver supports a variety of Dell, HP, Adaptec, IBM and
-	  ICP storage products. For a list of supported products, refer
-	  to <file:Documentation/scsi/aacraid.txt>.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called aacraid.
-
 
 source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
 
@@ -501,7 +493,7 @@ config SCSI_ATA_PIIX
 	tristate "Intel PIIX/ICH SATA support"
 	depends on SCSI_SATA && PCI
 	help
-	  This option enables support for ICH5/6/7/8 Serial ATA.
+	  This option enables support for ICH5 Serial ATA.
 	  If PATA support was enabled previously, this enables
 	  support for select Intel PIIX/ICH PATA host controllers.
 
@@ -607,10 +599,10 @@ config SCSI_SATA_VIA
 	  If unsure, say N.
 
 config SCSI_SATA_VITESSE
-	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
+	tristate "VITESSE VSC-7174 SATA support"
 	depends on SCSI_SATA && PCI
 	help
-	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
+	  This option enables support for Vitesse VSC7174 Serial ATA.
 
 	  If unsure, say N.
 
@@ -1091,7 +1083,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
 	  memory using PCI DAC cycles.
 
 config SCSI_SYM53C8XX_DEFAULT_TAGS
-	int "Default tagged command queue depth"
+	int "default tagged command queue depth"
 	depends on SCSI_SYM53C8XX_2
 	default "16"
 	help
@@ -1102,7 +1094,7 @@ config SCSI_SYM53C8XX_DEFAULT_TAGS
 	  exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
 
 config SCSI_SYM53C8XX_MAX_TAGS
-	int "Maximum number of queued commands"
+	int "maximum number of queued commands"
 	depends on SCSI_SYM53C8XX_2
 	default "64"
 	help
@@ -1111,14 +1103,13 @@ config SCSI_SYM53C8XX_MAX_TAGS
 	  possible. The driver supports up to 256 queued commands per device.
 	  This value is used as a compiled-in hard limit.
 
-config SCSI_SYM53C8XX_MMIO
-	bool "Use memory mapped IO"
+config SCSI_SYM53C8XX_IOMAPPED
+	bool "use port IO"
 	depends on SCSI_SYM53C8XX_2
-	default y
 	help
-	  Memory mapped IO is faster than Port IO.  Most people should
-	  answer Y here, but some machines may have problems.  If you have
-	  to answer N here, please report the problem to the maintainer.
+	  If you say Y here, the driver will use port IO to access
+	  the card.  This is significantly slower then using memory
+	  mapped IO.  Most people should answer N.
 
 config SCSI_IPR
 	tristate "IBM Power Linux RAID adapter support"
@@ -1169,7 +1160,7 @@ config SCSI_NCR_Q720
 	  you do not have this SCSI card, so say N.
 
 config SCSI_NCR53C8XX_DEFAULT_TAGS
-	int "default tagged command queue depth"
+	int "  default tagged command queue depth"
 	depends on SCSI_ZALON || SCSI_NCR_Q720
 	default "8"
 	---help---
@@ -1195,7 +1186,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS
 	  There is no safe option other than using good SCSI devices.
 
 config SCSI_NCR53C8XX_MAX_TAGS
-	int "maximum number of queued commands"
+	int "  maximum number of queued commands"
 	depends on SCSI_ZALON || SCSI_NCR_Q720
 	default "32"
 	---help---
@@ -1212,7 +1203,7 @@ config SCSI_NCR53C8XX_MAX_TAGS
 	  There is no safe option and the default answer is recommended.
 
 config SCSI_NCR53C8XX_SYNC
-	int "synchronous transfers frequency in MHz"
+	int "  synchronous transfers frequency in MHz"
 	depends on SCSI_ZALON || SCSI_NCR_Q720
 	default "20"
 	---help---
@@ -1246,7 +1237,7 @@ config SCSI_NCR53C8XX_SYNC
 	  terminations and SCSI conformant devices.
 
 config SCSI_NCR53C8XX_PROFILE
-	bool "enable profiling"
+	bool "  enable profiling"
 	depends on SCSI_ZALON || SCSI_NCR_Q720
 	help
 	  This option allows you to enable profiling information gathering.
@@ -1257,7 +1248,7 @@ config SCSI_NCR53C8XX_PROFILE
 	  The normal answer therefore is N.
 
 config SCSI_NCR53C8XX_NO_DISCONNECT
-	bool "not allow targets to disconnect"
+	bool "  not allow targets to disconnect"
 	depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
 	help
 	  This option is only provided for safety if you suspect some SCSI
@@ -1322,6 +1313,15 @@ config SCSI_QLOGIC_FAS
 	  To compile this driver as a module, choose M here: the
 	  module will be called qlogicfas.
 
+config SCSI_QLOGIC_FC
+	tristate "Qlogic ISP FC SCSI support"
+	depends on PCI && SCSI
+	help
+	  This is a driver for the QLogic ISP2100 SCSI-FCP host adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qlogicfc.
+
 config SCSI_QLOGIC_FC_FIRMWARE
 	bool "Include loadable firmware in driver"
 	depends on SCSI_QLOGIC_FC