X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;h=a480a3742d47a67caaf65c3428073797351f6dc2;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=27fec8a5eb5bff4642c28160fb4d0ad6941dcd15;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 27fec8a5e..a480a3742 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1,5 +1,11 @@ menu "SCSI device support" +config RAID_ATTRS + tristate "RAID Transport Class" + default n + ---help--- + Provides RAID + config SCSI tristate "SCSI device support" ---help--- @@ -137,6 +143,24 @@ config CHR_DEV_SG If unsure, say N. +config CHR_DEV_SCH + tristate "SCSI media changer support" + depends on SCSI + ---help--- + This is a driver for SCSI media changers. Most common devices are + tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you + don't need this for those tiny 6-slot cdrom changers. Media + changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. + If you have such hardware and want to use it with linux, say Y + here. Check for details. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read and + . The module will be called ch.o. + If unsure, say N. + + comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs" depends on SCSI @@ -205,17 +229,48 @@ config SCSI_FC_ATTRS config SCSI_ISCSI_ATTRS tristate "iSCSI Transport Attributes" - depends on SCSI + depends on SCSI && NET help If you wish to export transport-specific information about each attached iSCSI device to sysfs, say Y. Otherwise, say N. +config SCSI_SAS_ATTRS + tristate "SAS Transport Attributes" + depends on SCSI + help + If you wish to export transport-specific information about + each attached SAS device to sysfs, say Y. + endmenu menu "SCSI low-level drivers" depends on SCSI!=n +config ISCSI_TCP + tristate "iSCSI Initiator over TCP/IP" + depends on SCSI && INET + select CRYPTO + select CRYPTO_MD5 + select CRYPTO_CRC32C + select SCSI_ISCSI_ATTRS + help + The iSCSI Driver provides a host with the ability to access storage + through an IP network. The driver uses the iSCSI protocol to transport + SCSI requests and responses over a TCP/IP network between the host + (the "initiator") and "targets". Architecturally, the iSCSI driver + combines with the host's TCP/IP stack, network drivers, and Network + Interface Card (NIC) to provide the same functions as a SCSI or a + Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). + + To compile this driver as a module, choose M here: the + module will be called iscsi_tcp. + + The userspace component needed to initialize the driver, documentation, + and sample configuration files can be found here: + + http://linux-iscsi.sf.net + config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" depends on SGI_IP22 && SCSI @@ -232,7 +287,7 @@ config SCSI_DECNCR config SCSI_DECSII tristate "DEC SII Scsi Driver" - depends on MACH_DECSTATION && SCSI && MIPS32 + depends on MACH_DECSTATION && SCSI && 32BIT config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" @@ -281,6 +336,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT + select SCSI_SPI_ATTRS ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -323,6 +379,14 @@ config SCSI_AHA1740 config SCSI_AACRAID tristate "Adaptec AACRAID support" depends on SCSI && PCI + help + This driver supports a variety of Dell, HP, Adaptec, IBM and + ICP storage products. For a list of supported products, refer + to . + + To compile this driver as a module, choose M here: the module + will be called aacraid. + source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" @@ -382,7 +446,9 @@ config SCSI_DPT_I2O config SCSI_ADVANSYS tristate "AdvanSys SCSI support" - depends on (ISA || EISA || PCI) && SCSI && BROKEN + depends on SCSI + depends on ISA || EISA || PCI + depends on BROKEN || X86_32 help This is a driver for all SCSI host adapters manufactured by AdvanSys. It is documented in the kernel source in @@ -406,7 +472,7 @@ config SCSI_IN2000 source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_SATA - bool "Serial ATA (SATA) support" + tristate "Serial ATA (SATA) support" depends on SCSI help This driver family supports Serial ATA host controllers @@ -441,6 +507,15 @@ config SCSI_ATA_PIIX If unsure, say N. +config SCSI_SATA_MV + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] chips. + + If unsure, say N. + config SCSI_SATA_NV tristate "NVIDIA SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL @@ -449,11 +524,11 @@ config SCSI_SATA_NV If unsure, say N. -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" +config SCSI_PDC_ADMA + tristate "Pacific Digital ADMA support" depends on SCSI_SATA && PCI help - This option enables support for Promise Serial ATA TX2/TX4. + This option enables support for Pacific Digital ADMA controllers If unsure, say N. @@ -465,6 +540,14 @@ config SCSI_SATA_QSTOR If unsure, say N. +config SCSI_SATA_PROMISE + tristate "Promise SATA TX2/TX4 support" + depends on SCSI_SATA && PCI + help + This option enables support for Promise Serial ATA TX2/TX4. + + If unsure, say N. + config SCSI_SATA_SX4 tristate "Promise SATA SX4 support" depends on SCSI_SATA && PCI && EXPERIMENTAL @@ -481,6 +564,14 @@ config SCSI_SATA_SIL If unsure, say N. +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + config SCSI_SATA_SIS tristate "SiS 964/180 SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL @@ -506,13 +597,18 @@ config SCSI_SATA_VIA If unsure, say N. config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 SATA support" + tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" depends on SCSI_SATA && PCI help - This option enables support for Vitesse VSC7174 Serial ATA. + This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. If unsure, say N. +config SCSI_SATA_INTEL_COMBINED + bool + depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) + default y + config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API @@ -535,22 +631,10 @@ config SCSI_OMIT_FLASHPOINT substantial, so users of MultiMaster Host Adapters may wish to omit it. -# -# This is marked broken because it uses over 4kB of stack in -# just two routines: -# 2076 CpqTsProcessIMQEntry -# 2052 PeekIMQEntry -# -config SCSI_CPQFCTS - tristate "Compaq Fibre Channel 64-bit/66Mhz HBA support" - depends on PCI && SCSI && BROKEN - help - Say Y here to compile in support for the Compaq StorageWorks Fibre - Channel 64-bit/66Mhz Host Bus Adapter. - config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI + select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -560,6 +644,7 @@ config SCSI_DMX3191D config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -680,6 +765,7 @@ config SCSI_GDTH config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using PIO. Most boards such as the Trantor T130 fit this @@ -699,6 +785,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using memory mapped I/O. @@ -837,7 +924,7 @@ config SCSI_INIA100 config SCSI_PPA tristate "IOMEGA parallel port (ppa - older drives)" - depends on SCSI && PARPORT + depends on SCSI && PARPORT_PC ---help--- This driver supports older versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -864,7 +951,7 @@ config SCSI_PPA config SCSI_IMM tristate "IOMEGA parallel port (imm - newer drives)" - depends on SCSI && PARPORT + depends on SCSI && PARPORT_PC ---help--- This driver supports newer versions of IOMEGA's parallel port ZIP drive (a 100 MB removable media device). @@ -891,7 +978,7 @@ config SCSI_IMM config SCSI_IZIP_EPP16 bool "ppa/imm option - Use slow (but safe) EPP-16" - depends on PARPORT && (SCSI_PPA || SCSI_IMM) + depends on SCSI_PPA || SCSI_IMM ---help--- EPP (Enhanced Parallel Port) is a standard for parallel ports which allows them to act as expansion buses that can handle up to 64 @@ -906,7 +993,7 @@ config SCSI_IZIP_EPP16 config SCSI_IZIP_SLOW_CTR bool "ppa/imm option - Assume slow parport control register" - depends on PARPORT && (SCSI_PPA || SCSI_IMM) + depends on SCSI_PPA || SCSI_IMM help Some parallel ports are known to have excessive delays between changing the parallel port control register and good data being @@ -994,7 +1081,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE memory using PCI DAC cycles. config SCSI_SYM53C8XX_DEFAULT_TAGS - int "default tagged command queue depth" + int "Default tagged command queue depth" depends on SCSI_SYM53C8XX_2 default "16" help @@ -1005,7 +1092,7 @@ config SCSI_SYM53C8XX_DEFAULT_TAGS exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. config SCSI_SYM53C8XX_MAX_TAGS - int "maximum number of queued commands" + int "Maximum number of queued commands" depends on SCSI_SYM53C8XX_2 default "64" help @@ -1014,13 +1101,14 @@ config SCSI_SYM53C8XX_MAX_TAGS possible. The driver supports up to 256 queued commands per device. This value is used as a compiled-in hard limit. -config SCSI_SYM53C8XX_IOMAPPED - bool "use port IO" +config SCSI_SYM53C8XX_MMIO + bool "Use memory mapped IO" depends on SCSI_SYM53C8XX_2 + default y help - If you say Y here, the driver will use port IO to access - the card. This is significantly slower then using memory - mapped IO. Most people should answer N. + Memory mapped IO is faster than Port IO. Most people should + answer Y here, but some machines may have problems. If you have + to answer N here, please report the problem to the maintainer. config SCSI_IPR tristate "IBM Power Linux RAID adapter support" @@ -1182,6 +1270,7 @@ config SCSI_MCA_53C9X config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.10 of the SCSI-HOWTO, available from @@ -1192,28 +1281,6 @@ config SCSI_PAS16 To compile this driver as a module, choose M here: the module will be called pas16. -config SCSI_PCI2000 - tristate "PCI2000 support" - depends on PCI && SCSI && BROKEN - help - This is support for the PCI2000I EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called pci2000. - -config SCSI_PCI2220I - tristate "PCI2220i support" - depends on PCI && SCSI && BROKEN - help - This is support for the PCI2220i EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called pci2220i. - config SCSI_PSI240I tristate "PSI240i support" depends on ISA && SCSI @@ -1245,36 +1312,6 @@ config SCSI_QLOGIC_FAS To compile this driver as a module, choose M here: the module will be called qlogicfas. -config SCSI_QLOGIC_ISP - tristate "Qlogic ISP SCSI support (old driver)" - depends on PCI && SCSI && BROKEN - ---help--- - This driver works for all QLogic PCI SCSI host adapters (IQ-PCI, - IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card. (This latter - card is supported by the "AM53/79C974 PCI SCSI" driver.) - - If you say Y here, make sure to choose "BIOS" at the question "PCI - access mode". - - Please read the file . You - should also read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called qlogicisp. - - These days the hardware is also supported by the more modern qla1280 - driver. In doubt use that one instead of qlogicisp. - -config SCSI_QLOGIC_FC - tristate "Qlogic ISP FC SCSI support" - depends on PCI && SCSI - help - This is a driver for the QLogic ISP2100 SCSI-FCP host adapter. - - To compile this driver as a module, choose M here: the - module will be called qlogicfc. - config SCSI_QLOGIC_FC_FIRMWARE bool "Include loadable firmware in driver" depends on SCSI_QLOGIC_FC @@ -1292,14 +1329,6 @@ config SCSI_QLOGIC_1280 To compile this driver as a module, choose M here: the module will be called qla1280. -config SCSI_QLOGIC_1280_1040 - bool "Qlogic QLA 1020/1040 SCSI support" - depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y - help - Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and - do not want to use the old driver. This option enables support in - the qla1280 driver for those host adapters. - config SCSI_QLOGICPTI tristate "PTI Qlogic, ISP Driver" depends on SBUS && SCSI @@ -1402,6 +1431,7 @@ config SCSI_DC390T config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1660,6 +1690,7 @@ config OKTAGON_SCSI config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI && BROKEN + select SCSI_SPI_ATTRS ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have @@ -1700,7 +1731,8 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" - depends on MAC && SCSI + depends on MAC && SCSI=y + select SCSI_SPI_ATTRS help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1721,7 +1753,8 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" - depends on MVME147 && SCSI + depends on MVME147 && SCSI=y + select SCSI_SPI_ATTRS help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1729,6 +1762,7 @@ config MVME147_SCSI config MVME16x_SCSI bool "NCR53C710 SCSI driver for MVME16x" depends on MVME16x && SCSI && BROKEN + select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1737,6 +1771,7 @@ config MVME16x_SCSI config BVME6000_SCSI bool "NCR53C710 SCSI driver for BVME6000" depends on BVME6000 && SCSI && BROKEN + select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1753,6 +1788,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" depends on SUN3 && SCSI && BROKEN + select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 SCSI controller found in the Sun 3/50 and 3/60, as well as for @@ -1762,7 +1798,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" - depends on SUN3X && SCSI + depends on SUN3X && SCSI=y help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. @@ -1781,7 +1817,7 @@ config SCSI_SUNESP config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" - depends on ARCH_S390 && QDIO && SCSI + depends on S390 && QDIO && SCSI select SCSI_FC_ATTRS help If you want to access SCSI devices attached to your IBM eServer