X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2FNCR53c406a.c;h=ae37d3ab9c4acc2b2864b0445859e1a333e7519d;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=c685d546f8381e68a8e99a348e5d054caf6c472c;hpb=6a77f38946aaee1cd85eeec6cf4229b204c15071;p=linux-2.6.git

diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index c685d546f..ae37d3ab9 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -62,7 +62,7 @@
 
 #define SYNC_MODE 0		/* Synchronous transfer mode */
 
-#if DEBUG
+#ifdef DEBUG
 #undef NCR53C406A_DEBUG
 #define NCR53C406A_DEBUG 1
 #endif
@@ -182,13 +182,13 @@ static int irq_probe(void);
 static void *bios_base;
 #endif
 
-#if PORT_BASE
+#ifdef PORT_BASE
 static int port_base = PORT_BASE;
 #else
 static int port_base;
 #endif
 
-#if IRQ_LEV
+#ifdef IRQ_LEV
 static int irq_level = IRQ_LEV;
 #else
 static int irq_level = -1;	/* 0 is 'no irq', so use -1 for 'uninitialized' */
@@ -447,7 +447,7 @@ static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int
 }
 #endif				/* USE_PIO */
 
-static int __init NCR53c406a_detect(Scsi_Host_Template * tpnt)
+static int __init NCR53c406a_detect(struct scsi_host_template * tpnt)
 {
 	int present = 0;
 	struct Scsi_Host *shpnt = NULL;
@@ -710,7 +710,7 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 
 	/* We are locked here already by the mid layer */
 	REG0;
-	outb(SCpnt->device->id, DEST_ID);	/* set destination */
+	outb(scmd_id(SCpnt), DEST_ID);	/* set destination */
 	outb(FLUSH_FIFO, CMD_REG);	/* reset the fifos */
 
 	for (i = 0; i < SCpnt->cmd_len; i++) {
@@ -722,15 +722,12 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
-static int NCR53c406a_abort(Scsi_Cmnd * SCpnt)
-{
-	DEB(printk("NCR53c406a_abort called\n"));
-	return FAILED;		/* Don't know how to abort */
-}
-
 static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
 {
 	DEB(printk("NCR53c406a_reset called\n"));
+
+	spin_lock_irq(SCpnt->device->host->host_lock);
+
 	outb(C4_IMG, CONFIG4);	/* Select reg set 0 */
 	outb(CHIP_RESET, CMD_REG);
 	outb(SCSI_NOP, CMD_REG);	/* required after reset */
@@ -738,17 +735,10 @@ static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
 	chip_init();
 
 	rtrc(2);
-	return SUCCESS;
-}
 
-static int NCR53c406a_device_reset(Scsi_Cmnd * SCpnt)
-{
-	return FAILED;
-}
+	spin_unlock_irq(SCpnt->device->host->host_lock);
 
-static int NCR53c406a_bus_reset(Scsi_Cmnd * SCpnt)
-{
-	return FAILED;
+	return SUCCESS;
 }
 
 static int NCR53c406a_biosparm(struct scsi_device *disk,
@@ -1067,7 +1057,7 @@ MODULE_LICENSE("GPL");
  * Use SG_NONE if DMA mode is enabled!
  */
 
-static Scsi_Host_Template driver_template = 
+static struct scsi_host_template driver_template =
 {
      .proc_name         	= "NCR53c406a"		/* proc_name */,        
      .name              	= "NCR53c406a"		/* name */,             
@@ -1075,9 +1065,6 @@ static Scsi_Host_Template driver_template =
      .release            	= NCR53c406a_release,
      .info              	= NCR53c406a_info		/* info */,             
      .queuecommand      	= NCR53c406a_queue	/* queuecommand */,     
-     .eh_abort_handler  	= NCR53c406a_abort	/* abort */,            
-     .eh_bus_reset_handler      = NCR53c406a_bus_reset	/* reset */,            
-     .eh_device_reset_handler   = NCR53c406a_device_reset	/* reset */,            
      .eh_host_reset_handler     = NCR53c406a_host_reset	/* reset */,            
      .bios_param        	= NCR53c406a_biosparm	/* biosparm */,         
      .can_queue         	= 1			/* can_queue */,