X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2Faic7xxx%2Faic7xxx_93cx6.c;fp=drivers%2Fscsi%2Faic7xxx%2Faic7xxx_93cx6.c;h=3cb07e114e89cd6e83e9753594dc741dd63fe03c;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=468d612a44f66a3b0c86165cc89534001e8a217b;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/drivers/scsi/aic7xxx/aic7xxx_93cx6.c b/drivers/scsi/aic7xxx/aic7xxx_93cx6.c
index 468d612a4..3cb07e114 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_93cx6.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_93cx6.c
@@ -28,9 +28,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#17 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#19 $
  */
 
 /*
@@ -64,7 +62,6 @@
  *   is preceded by an initial zero (leading 0, followed by 16-bits, MSB
  *   first).  The clock cycling from low to high initiates the next data
  *   bit to be sent from the chip.
- *
  */
 
 #ifdef __linux__
@@ -81,14 +78,22 @@
  * Right now, we only have to read the SEEPROM.  But we make it easier to
  * add other 93Cx6 functions.
  */
-static struct seeprom_cmd {
+struct seeprom_cmd {
   	uint8_t len;
- 	uint8_t bits[9];
-} seeprom_read = {3, {1, 1, 0}};
+ 	uint8_t bits[11];
+};
 
+/* Short opcodes for the c46 */
 static struct seeprom_cmd seeprom_ewen = {9, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
 static struct seeprom_cmd seeprom_ewds = {9, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Long opcodes for the C56/C66 */
+static struct seeprom_cmd seeprom_long_ewen = {11, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
+static struct seeprom_cmd seeprom_long_ewds = {11, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Common opcodes */
 static struct seeprom_cmd seeprom_write = {3, {1, 0, 1}};
+static struct seeprom_cmd seeprom_read  = {3, {1, 1, 0}};
 
 /*
  * Wait for the SEERDY to go high; about 800 ns.
@@ -222,12 +227,25 @@ int
 ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 		  u_int start_addr, u_int count)
 {
+	struct seeprom_cmd *ewen, *ewds;
 	uint16_t v;
 	uint8_t temp;
 	int i, k;
 
 	/* Place the chip into write-enable mode */
-	send_seeprom_cmd(sd, &seeprom_ewen);
+	if (sd->sd_chip == C46) {
+		ewen = &seeprom_ewen;
+		ewds = &seeprom_ewds;
+	} else if (sd->sd_chip == C56_66) {
+		ewen = &seeprom_long_ewen;
+		ewds = &seeprom_long_ewds;
+	} else {
+		printf("ahc_write_seeprom: unsupported seeprom type %d\n",
+		       sd->sd_chip);
+		return (0);
+	}
+
+	send_seeprom_cmd(sd, ewen);
 	reset_seeprom(sd);
 
 	/* Write all requested data out to the seeprom. */
@@ -277,7 +295,7 @@ ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 	}
 
 	/* Put the chip back into write-protect mode */
-	send_seeprom_cmd(sd, &seeprom_ewds);
+	send_seeprom_cmd(sd, ewds);
 	reset_seeprom(sd);
 
 	return (1);