X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2Fmac_scsi.c;h=a942a21dd87eaf78610e04f86933ce76b0ef7815;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=f343fc7042841b3eeaeb6935ec11988409e8358e;hpb=9bf4aaab3e101692164d49b7ca357651eb691cb6;p=linux-2.6.git

diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index f343fc704..a942a21dd 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -65,9 +65,6 @@
 #define RESET_BOOT
 #define DRIVER_SETUP
 
-#define	ENABLE_IRQ()	mac_enable_irq( IRQ_MAC_SCSI ); 
-#define	DISABLE_IRQ()	mac_disable_irq( IRQ_MAC_SCSI );
-
 extern void via_scsi_clear(void);
 
 #ifdef RESET_BOOT
@@ -222,7 +219,7 @@ static struct Scsi_Host *default_instance;
 #endif
 
 /*
- * Function : int macscsi_detect(Scsi_Host_Template * tpnt)
+ * Function : int macscsi_detect(struct scsi_host_template * tpnt)
  *
  * Purpose : initializes mac NCR5380 driver based on the
  *	command line / compile time port and irq definitions.
@@ -233,7 +230,7 @@ static struct Scsi_Host *default_instance;
  *
  */
  
-int macscsi_detect(Scsi_Host_Template * tpnt)
+int macscsi_detect(struct scsi_host_template * tpnt)
 {
     static int called = 0;
     int flags = 0;
@@ -302,7 +299,7 @@ int macscsi_detect(Scsi_Host_Template * tpnt)
 
     if (instance->irq != SCSI_IRQ_NONE)
 	if (request_irq(instance->irq, NCR5380_intr, IRQ_FLG_SLOW, 
-		"ncr5380", NCR5380_intr)) {
+		"ncr5380", instance)) {
 	    printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
 		   instance->host_no, instance->irq);
 	    instance->irq = SCSI_IRQ_NONE;
@@ -326,6 +323,7 @@ int macscsi_release (struct Scsi_Host *shpnt)
 {
 	if (shpnt->irq != SCSI_IRQ_NONE)
 		free_irq (shpnt->irq, NCR5380_intr);
+	NCR5380_exit(shpnt);
 
 	return 0;
 }
@@ -350,7 +348,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
 	printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
 
 	/* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
-	mac_disable_irq(IRQ_MAC_SCSI);
+	disable_irq(IRQ_MAC_SCSI);
 
 	/* get in phase */
 	NCR5380_write( TARGET_COMMAND_REG,
@@ -368,7 +366,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
 		barrier();
 
 	/* switch on SCSI IRQ again */
-	mac_enable_irq(IRQ_MAC_SCSI);
+	enable_irq(IRQ_MAC_SCSI);
 
 	printk(KERN_INFO " done\n" );
 }
@@ -580,7 +578,7 @@ static int macscsi_pwrite (struct Scsi_Host *instance,
 
 #include "NCR5380.c"
 
-static Scsi_Host_Template driver_template = {
+static struct scsi_host_template driver_template = {
 	.proc_name			= "Mac5380",
 	.proc_info			= macscsi_proc_info,
 	.name				= "Macintosh NCR5380 SCSI",
@@ -590,8 +588,6 @@ static Scsi_Host_Template driver_template = {
 	.queuecommand			= macscsi_queue_command,
 	.eh_abort_handler		= macscsi_abort,
 	.eh_bus_reset_handler		= macscsi_bus_reset,
-	.eh_device_reset_handler	= macscsi_device_reset,
-	.eh_host_reset_handler		= macscsi_host_reset,
 	.can_queue			= CAN_QUEUE,
 	.this_id			= 7,
 	.sg_tablesize			= SG_ALL,