X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2Fmegaraid%2Fmegaraid_mbox.c;fp=drivers%2Fscsi%2Fmegaraid%2Fmegaraid_mbox.c;h=cd982c877da07e4d791730e13b2b58c19935f066;hb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;hp=bec1424eda850f0f5b121ed9e6fcb15c10506a7b;hpb=4e76c8a9fa413ccc09d3f7f664183dcce3555d57;p=linux-2.6.git

diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index bec1424ed..cd982c877 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mbox.c
- * Version	: v2.20.4.8 (Apr 11 2006)
+ * Version	: v2.20.4.9 (Jul 16 2006)
  *
  * Authors:
  * 	Atul Mukker		<Atul.Mukker@lsil.com>
@@ -714,12 +714,13 @@ megaraid_io_detach(adapter_t *adapter)
  * . Allocate memory required for all the commands
  * . Use internal library of FW routines, build up complete soft state
  */
-static int __init
+static int __devinit
 megaraid_init_mbox(adapter_t *adapter)
 {
 	struct pci_dev		*pdev;
 	mraid_device_t		*raid_dev;
 	int			i;
+	uint32_t		magic64;
 
 
 	adapter->ito	= MBOX_TIMEOUT;
@@ -767,7 +768,7 @@ megaraid_init_mbox(adapter_t *adapter)
 	//
 
 	// request IRQ and register the interrupt service routine
-	if (request_irq(adapter->irq, megaraid_isr, SA_SHIRQ, "megaraid",
+	if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
 		adapter)) {
 
 		con_log(CL_ANN, (KERN_WARNING
@@ -863,12 +864,33 @@ megaraid_init_mbox(adapter_t *adapter)
 
 	// Set the DMA mask to 64-bit. All supported controllers as capable of
 	// DMA in this range
-	if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) {
-
-		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: could not set DMA mask for 64-bit.\n"));
+	pci_read_config_dword(adapter->pdev, PCI_CONF_AMISIG64, &magic64);
+
+	if (((magic64 == HBA_SIGNATURE_64_BIT) &&
+		((adapter->pdev->subsystem_device !=
+		PCI_SUBSYS_ID_MEGARAID_SATA_150_6) ||
+		(adapter->pdev->subsystem_device !=
+		PCI_SUBSYS_ID_MEGARAID_SATA_150_4))) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+		adapter->pdev->device == PCI_DEVICE_ID_VERDE) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+		adapter->pdev->device == PCI_DEVICE_ID_DOBSON) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_LSI_LOGIC &&
+		adapter->pdev->device == PCI_DEVICE_ID_LINDSAY) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
+		adapter->pdev->device == PCI_DEVICE_ID_PERC4_DI_EVERGLADES) ||
+		(adapter->pdev->vendor == PCI_VENDOR_ID_DELL &&
+		adapter->pdev->device == PCI_DEVICE_ID_PERC4E_DI_KOBUK)) {
+		if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK)) {
+			con_log(CL_ANN, (KERN_WARNING
+				"megaraid: DMA mask for 64-bit failed\n"));
 
-		goto out_free_sysfs_res;
+			if (pci_set_dma_mask (adapter->pdev, DMA_32BIT_MASK)) {
+				con_log(CL_ANN, (KERN_WARNING
+					"megaraid: 32-bit DMA mask failed\n"));
+				goto out_free_sysfs_res;
+			}
+		}
 	}
 
 	// setup tasklet for DPC
@@ -1622,6 +1644,14 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
 				rdev->last_disp |= (1L << SCP2CHANNEL(scp));
 			}
 
+			if (scp->cmnd[1] & MEGA_SCSI_INQ_EVPD) {
+				scp->sense_buffer[0] = 0x70;
+				scp->sense_buffer[2] = ILLEGAL_REQUEST;
+				scp->sense_buffer[12] = MEGA_INVALID_FIELD_IN_CDB;
+				scp->result = CHECK_CONDITION << 1;
+				return NULL;
+			}
+
 			/* Fall through */
 
 		case READ_CAPACITY: