X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fscsi%2Fscsi_scan.c;h=96b7cbd746a84ac323d92bf6c72d0333515b3fd3;hb=refs%2Fheads%2Fvserver;hp=8d0d302844a1d5a5c3a9df8530e1be0974f5c4d6;hpb=f7f1b0f1e2fbadeab12d24236000e778aa9b1ead;p=linux-2.6.git diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 8d0d30284..96b7cbd74 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -9,7 +9,7 @@ * global variable (boot or module load time) settings. * * A specific LUN is scanned via an INQUIRY command; if the LUN has a - * device attached, a Scsi_Device is allocated and setup for it. + * device attached, a scsi_device is allocated and setup for it. * * For every id of every channel on the given host: * @@ -17,7 +17,7 @@ * device or storage attached to LUN 0): * * If LUN 0 has a device attached, allocate and setup a - * Scsi_Device for it. + * scsi_device for it. * * If target is SCSI-3 or up, issue a REPORT LUN, and scan * all of the LUNs returned by the REPORT LUN; else, @@ -25,19 +25,20 @@ * or a LUN is seen that cannot have a device attached to it. */ -#include #include #include #include #include -#include +#include +#include +#include #include +#include #include #include #include #include -#include #include #include @@ -74,7 +75,7 @@ #define SCSI_SCAN_TARGET_PRESENT 1 #define SCSI_SCAN_LUN_PRESENT 2 -static char *scsi_null_device_strs = "nullnullnullnull"; +static const char *scsi_null_device_strs = "nullnullnullnull"; #define MAX_SCSI_LUNS 512 @@ -88,6 +89,17 @@ module_param_named(max_luns, max_scsi_luns, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(max_luns, "last scsi LUN (should be between 1 and 2^32-1)"); +#ifdef CONFIG_SCSI_SCAN_ASYNC +#define SCSI_SCAN_TYPE_DEFAULT "async" +#else +#define SCSI_SCAN_TYPE_DEFAULT "sync" +#endif + +static char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT; + +module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO); +MODULE_PARM_DESC(scan, "sync, async or none"); + /* * max_scsi_report_luns: the maximum number of LUNS that will be * returned from the REPORT LUNS command. 8 times this value must @@ -109,17 +121,81 @@ MODULE_PARM_DESC(inq_timeout, "Timeout (in seconds) waiting for devices to answer INQUIRY." " Default is 5. Some non-compliant devices need more."); +static DEFINE_SPINLOCK(async_scan_lock); +static LIST_HEAD(scanning_hosts); + +struct async_scan_data { + struct list_head list; + struct Scsi_Host *shost; + struct completion prev_finished; +}; + +/** + * scsi_complete_async_scans - Wait for asynchronous scans to complete + * + * When this function returns, any host which started scanning before + * this function was called will have finished its scan. Hosts which + * started scanning after this function was called may or may not have + * finished. + */ +int scsi_complete_async_scans(void) +{ + struct async_scan_data *data; + + do { + if (list_empty(&scanning_hosts)) + return 0; + /* If we can't get memory immediately, that's OK. Just + * sleep a little. Even if we never get memory, the async + * scans will finish eventually. + */ + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) + msleep(1); + } while (!data); + + data->shost = NULL; + init_completion(&data->prev_finished); + + spin_lock(&async_scan_lock); + /* Check that there's still somebody else on the list */ + if (list_empty(&scanning_hosts)) + goto done; + list_add_tail(&data->list, &scanning_hosts); + spin_unlock(&async_scan_lock); + + printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n"); + wait_for_completion(&data->prev_finished); + + spin_lock(&async_scan_lock); + list_del(&data->list); + if (!list_empty(&scanning_hosts)) { + struct async_scan_data *next = list_entry(scanning_hosts.next, + struct async_scan_data, list); + complete(&next->prev_finished); + } + done: + spin_unlock(&async_scan_lock); + + kfree(data); + return 0; +} + +#ifdef MODULE +/* Only exported for the benefit of scsi_wait_scan */ +EXPORT_SYMBOL_GPL(scsi_complete_async_scans); +#endif + /** * scsi_unlock_floptical - unlock device via a special MODE SENSE command - * @sreq: used to send the command + * @sdev: scsi device to send command to * @result: area to store the result of the MODE SENSE * * Description: - * Send a vendor specific MODE SENSE (not a MODE SELECT) command using - * @sreq to unlock a device, storing the (unused) results into result. + * Send a vendor specific MODE SENSE (not a MODE SELECT) command. * Called for BLIST_KEY devices. **/ -static void scsi_unlock_floptical(struct scsi_request *sreq, +static void scsi_unlock_floptical(struct scsi_device *sdev, unsigned char *result) { unsigned char scsi_cmd[MAX_COMMAND_SIZE]; @@ -129,64 +205,10 @@ static void scsi_unlock_floptical(struct scsi_request *sreq, scsi_cmd[1] = 0; scsi_cmd[2] = 0x2e; scsi_cmd[3] = 0; - scsi_cmd[4] = 0x2a; /* size */ + scsi_cmd[4] = 0x2a; /* size */ scsi_cmd[5] = 0; - sreq->sr_cmd_len = 0; - sreq->sr_data_direction = DMA_FROM_DEVICE; - scsi_wait_req(sreq, scsi_cmd, result, 0x2a /* size */, SCSI_TIMEOUT, 3); -} - -/** - * print_inquiry - printk the inquiry information - * @inq_result: printk this SCSI INQUIRY - * - * Description: - * printk the vendor, model, and other information found in the - * INQUIRY data in @inq_result. - * - * Notes: - * Remove this, and replace with a hotplug event that logs any - * relevant information. - **/ -static void print_inquiry(unsigned char *inq_result) -{ - int i; - - printk(KERN_NOTICE " Vendor: "); - for (i = 8; i < 16; i++) - if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) - printk("%c", inq_result[i]); - else - printk(" "); - - printk(" Model: "); - for (i = 16; i < 32; i++) - if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) - printk("%c", inq_result[i]); - else - printk(" "); - - printk(" Rev: "); - for (i = 32; i < 36; i++) - if (inq_result[i] >= 0x20 && i < inq_result[4] + 5) - printk("%c", inq_result[i]); - else - printk(" "); - - printk("\n"); - - i = inq_result[0] & 0x1f; - - printk(KERN_NOTICE " Type: %s ", - i < - MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] : - "Unknown "); - printk(" ANSI SCSI revision: %02x", - inq_result[2] & 0x07); - if ((inq_result[2] & 0x07) == 1 && (inq_result[3] & 0x0f) == 1) - printk(" CCS\n"); - else - printk("\n"); + scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL, + SCSI_TIMEOUT, 3); } /** @@ -207,12 +229,11 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, int display_failure_msg = 1, ret; struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - sdev = kmalloc(sizeof(*sdev) + shost->transportt->device_size, + sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size, GFP_ATOMIC); if (!sdev) goto out; - memset(sdev, 0, sizeof(*sdev)); sdev->vendor = scsi_null_device_strs; sdev->model = scsi_null_device_strs; sdev->rev = scsi_null_device_strs; @@ -254,6 +275,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, /* release fn is set up in scsi_sysfs_device_initialise, so * have to free and put manually here */ put_device(&starget->dev); + kfree(sdev); goto out; } @@ -268,8 +290,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, /* * if LLDD reports slave not present, don't clutter * console with alloc failure messages - - */ if (ret == -ENXIO) display_failure_msg = 0; @@ -281,7 +301,6 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, out_device_destroy: transport_destroy_device(&sdev->sdev_gendev); - scsi_free_queue(sdev->request_queue); put_device(&sdev->sdev_gendev); out: if (display_failure_msg) @@ -293,6 +312,7 @@ static void scsi_target_dev_release(struct device *dev) { struct device *parent = dev->parent; struct scsi_target *starget = to_scsi_target(dev); + kfree(starget); put_device(parent); } @@ -324,6 +344,18 @@ static struct scsi_target *__scsi_find_target(struct device *parent, return found_starget; } +/** + * scsi_alloc_target - allocate a new or find an existing target + * @parent: parent of the target (need not be a scsi host) + * @channel: target channel number (zero if no channels) + * @id: target id number + * + * Return an existing target if one exists, provided it hasn't already + * gone into STARGET_DEL state, otherwise allocate a new target. + * + * The target is returned with an incremented reference, so the caller + * is responsible for both reaping and doing a last put + */ static struct scsi_target *scsi_alloc_target(struct device *parent, int channel, uint id) { @@ -332,14 +364,15 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, unsigned long flags; const int size = sizeof(struct scsi_target) + shost->transportt->target_size; - struct scsi_target *starget = kmalloc(size, GFP_ATOMIC); + struct scsi_target *starget; struct scsi_target *found_target; + int error; + starget = kzalloc(size, GFP_KERNEL); if (!starget) { printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__); return NULL; } - memset(starget, 0, size); dev = &starget->dev; device_initialize(dev); starget->reap_ref = 1; @@ -351,6 +384,8 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, starget->channel = channel; INIT_LIST_HEAD(&starget->siblings); INIT_LIST_HEAD(&starget->devices); + starget->state = STARGET_RUNNING; + retry: spin_lock_irqsave(shost->host_lock, flags); found_target = __scsi_find_target(parent, channel, id); @@ -360,17 +395,67 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, list_add_tail(&starget->siblings, &shost->__targets); spin_unlock_irqrestore(shost->host_lock, flags); /* allocate and add */ - transport_setup_device(&starget->dev); - device_add(&starget->dev); - transport_add_device(&starget->dev); + transport_setup_device(dev); + error = device_add(dev); + if (error) { + dev_err(dev, "target device_add failed, error %d\n", error); + spin_lock_irqsave(shost->host_lock, flags); + list_del_init(&starget->siblings); + spin_unlock_irqrestore(shost->host_lock, flags); + transport_destroy_device(dev); + put_device(parent); + kfree(starget); + return NULL; + } + transport_add_device(dev); + if (shost->hostt->target_alloc) { + error = shost->hostt->target_alloc(starget); + + if(error) { + dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error); + /* don't want scsi_target_reap to do the final + * put because it will be under the host lock */ + get_device(dev); + scsi_target_reap(starget); + put_device(dev); + return NULL; + } + } + get_device(dev); + return starget; found: found_target->reap_ref++; spin_unlock_irqrestore(shost->host_lock, flags); - put_device(parent); - kfree(starget); - return found_target; + if (found_target->state != STARGET_DEL) { + put_device(parent); + kfree(starget); + return found_target; + } + /* Unfortunately, we found a dying target; need to + * wait until it's dead before we can get a new one */ + put_device(&found_target->dev); + flush_scheduled_work(); + goto retry; +} + +static void scsi_target_reap_usercontext(struct work_struct *work) +{ + struct scsi_target *starget = + container_of(work, struct scsi_target, ew.work); + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + unsigned long flags; + + transport_remove_device(&starget->dev); + device_del(&starget->dev); + transport_destroy_device(&starget->dev); + spin_lock_irqsave(shost->host_lock, flags); + if (shost->hostt->target_destroy) + shost->hostt->target_destroy(starget); + list_del_init(&starget->siblings); + spin_unlock_irqrestore(shost->host_lock, flags); + put_device(&starget->dev); } /** @@ -386,41 +471,70 @@ void scsi_target_reap(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); unsigned long flags; + spin_lock_irqsave(shost->host_lock, flags); if (--starget->reap_ref == 0 && list_empty(&starget->devices)) { - list_del_init(&starget->siblings); + BUG_ON(starget->state == STARGET_DEL); + starget->state = STARGET_DEL; spin_unlock_irqrestore(shost->host_lock, flags); - device_del(&starget->dev); - transport_unregister_device(&starget->dev); - put_device(&starget->dev); + execute_in_process_context(scsi_target_reap_usercontext, + &starget->ew); return; + } spin_unlock_irqrestore(shost->host_lock, flags); + + return; +} + +/** + * sanitize_inquiry_string - remove non-graphical chars from an INQUIRY result string + * @s: INQUIRY result string to sanitize + * @len: length of the string + * + * Description: + * The SCSI spec says that INQUIRY vendor, product, and revision + * strings must consist entirely of graphic ASCII characters, + * padded on the right with spaces. Since not all devices obey + * this rule, we will replace non-graphic or non-ASCII characters + * with spaces. Exception: a NUL character is interpreted as a + * string terminator, so all the following characters are set to + * spaces. + **/ +static void sanitize_inquiry_string(unsigned char *s, int len) +{ + int terminated = 0; + + for (; len > 0; (--len, ++s)) { + if (*s == 0) + terminated = 1; + if (terminated || *s < 0x20 || *s > 0x7e) + *s = ' '; + } } /** * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY - * @sreq: used to send the INQUIRY + * @sdev: scsi_device to probe * @inq_result: area to store the INQUIRY result + * @result_len: len of inq_result * @bflags: store any bflags found here * * Description: - * Probe the lun associated with @sreq using a standard SCSI INQUIRY; + * Probe the lun associated with @req using a standard SCSI INQUIRY; * - * If the INQUIRY is successful, sreq->sr_result is zero and: the + * If the INQUIRY is successful, zero is returned and the * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length - * are copied to the Scsi_Device at @sreq->sr_device (sdev); - * any flags value is stored in *@bflags. + * are copied to the scsi_device any flags value is stored in *@bflags. **/ -static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, - int *bflags) +static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, + int result_len, int *bflags) { - struct scsi_device *sdev = sreq->sr_device; /* a bit ugly */ unsigned char scsi_cmd[MAX_COMMAND_SIZE]; int first_inquiry_len, try_inquiry_len, next_inquiry_len; int response_len = 0; - int pass, count; + int pass, count, result; struct scsi_sense_hdr sshdr; *bflags = 0; @@ -433,38 +547,35 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, pass = 1; next_pass: - SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY pass %d " - "to host %d channel %d id %d lun %d, length %d\n", - pass, sdev->host->host_no, sdev->channel, - sdev->id, sdev->lun, try_inquiry_len)); + SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev, + "scsi scan: INQUIRY pass %d length %d\n", + pass, try_inquiry_len)); /* Each pass gets up to three chances to ignore Unit Attention */ for (count = 0; count < 3; ++count) { memset(scsi_cmd, 0, 6); scsi_cmd[0] = INQUIRY; scsi_cmd[4] = (unsigned char) try_inquiry_len; - sreq->sr_cmd_len = 0; - sreq->sr_data_direction = DMA_FROM_DEVICE; memset(inq_result, 0, try_inquiry_len); - scsi_wait_req(sreq, (void *) scsi_cmd, (void *) inq_result, - try_inquiry_len, - HZ/2 + HZ*scsi_inq_timeout, 3); + + result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, + inq_result, try_inquiry_len, &sshdr, + HZ / 2 + HZ * scsi_inq_timeout, 3); SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s " "with code 0x%x\n", - sreq->sr_result ? "failed" : "successful", - sreq->sr_result)); + result ? "failed" : "successful", result)); - if (sreq->sr_result) { + if (result) { /* * not-ready to ready transition [asc/ascq=0x28/0x0] * or power-on, reset [asc/ascq=0x29/0x0], continue. * INQUIRY should not yield UNIT_ATTENTION * but many buggy devices do so anyway. */ - if ((driver_byte(sreq->sr_result) & DRIVER_SENSE) && - scsi_request_normalize_sense(sreq, &sshdr)) { + if ((driver_byte(result) & DRIVER_SENSE) && + scsi_sense_valid(&sshdr)) { if ((sshdr.sense_key == UNIT_ATTENTION) && ((sshdr.asc == 0x28) || (sshdr.asc == 0x29)) && @@ -475,16 +586,20 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, break; } - if (sreq->sr_result == 0) { - response_len = (unsigned char) inq_result[4] + 5; + if (result == 0) { + sanitize_inquiry_string(&inq_result[8], 8); + sanitize_inquiry_string(&inq_result[16], 16); + sanitize_inquiry_string(&inq_result[32], 4); + + response_len = inq_result[4] + 5; if (response_len > 255) response_len = first_inquiry_len; /* sanity */ /* * Get any flags for this device. * - * XXX add a bflags to Scsi_Device, and replace the - * corresponding bit fields in Scsi_Device, so bflags + * XXX add a bflags to scsi_device, and replace the + * corresponding bit fields in scsi_device, so bflags * need not be passed as an argument. */ *bflags = scsi_get_device_flags(sdev, &inq_result[8], @@ -524,8 +639,8 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, /* If the last transfer attempt got an error, assume the * peripheral doesn't exist or is dead. */ - if (sreq->sr_result) - return; + if (result) + return -EIO; /* Don't report any more data than the device says is valid */ sdev->inquiry_len = min(try_inquiry_len, response_len); @@ -560,28 +675,30 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, if (sdev->scsi_level >= 2 || (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1)) sdev->scsi_level++; + sdev->sdev_target->scsi_level = sdev->scsi_level; - return; + return 0; } /** - * scsi_add_lun - allocate and fully initialze a Scsi_Device - * @sdevscan: holds information to be stored in the new Scsi_Device - * @sdevnew: store the address of the newly allocated Scsi_Device + * scsi_add_lun - allocate and fully initialze a scsi_device + * @sdevscan: holds information to be stored in the new scsi_device + * @sdevnew: store the address of the newly allocated scsi_device * @inq_result: holds the result of a previous INQUIRY to the LUN * @bflags: black/white list flag * * Description: - * Allocate and initialize a Scsi_Device matching sdevscan. Optionally + * Allocate and initialize a scsi_device matching sdevscan. Optionally * set fields based on values in *@bflags. If @sdevnew is not - * NULL, store the address of the new Scsi_Device in *@sdevnew (needed + * NULL, store the address of the new scsi_device in *@sdevnew (needed * when scanning a particular LUN). * * Return: - * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device - * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized + * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device + * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized **/ -static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) +static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, + int *bflags, int async) { /* * XXX do not save the inquiry, since it can change underneath us, @@ -593,12 +710,22 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) * scanning run at their own risk, or supply a user level program * that can correctly scan. */ - sdev->inquiry = kmalloc(sdev->inquiry_len, GFP_ATOMIC); - if (sdev->inquiry == NULL) { + + /* + * Copy at least 36 bytes of INQUIRY data, so that we don't + * dereference unallocated memory when accessing the Vendor, + * Product, and Revision strings. Badly behaved devices may set + * the INQUIRY Additional Length byte to a small value, indicating + * these strings are invalid, but often they contain plausible data + * nonetheless. It doesn't matter if the device sent < 36 bytes + * total, since scsi_probe_lun() initializes inq_result with 0s. + */ + sdev->inquiry = kmemdup(inq_result, + max_t(size_t, sdev->inquiry_len, 36), + GFP_ATOMIC); + if (sdev->inquiry == NULL) return SCSI_SCAN_NO_RESPONSE; - } - memcpy(sdev->inquiry, inq_result, sdev->inquiry_len); sdev->vendor = (char *) (sdev->inquiry + 8); sdev->model = (char *) (sdev->inquiry + 16); sdev->rev = (char *) (sdev->inquiry + 32); @@ -606,9 +733,8 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) if (*bflags & BLIST_ISROM) { /* * It would be better to modify sdev->type, and set - * sdev->removable, but then the print_inquiry() output - * would not show TYPE_ROM; if print_inquiry() is removed - * the issue goes away. + * sdev->removable; this can now be done since + * print_inquiry has gone away. */ inq_result[0] = TYPE_ROM; inq_result[1] |= 0x80; /* removable */ @@ -616,6 +742,14 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) sdev->no_uld_attach = 1; switch (sdev->type = (inq_result[0] & 0x1f)) { + case TYPE_RBC: + /* RBC devices can return SCSI-3 compliance and yet + * still not support REPORT LUNS, so make them act as + * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is + * specifically set */ + if ((*bflags & BLIST_REPORTLUN2) == 0) + *bflags |= BLIST_NOREPORTLUN; + /* fall through */ case TYPE_TAPE: case TYPE_DISK: case TYPE_PRINTER: @@ -625,18 +759,24 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) case TYPE_MEDIUM_CHANGER: case TYPE_ENCLOSURE: case TYPE_COMM: + case TYPE_RAID: sdev->writeable = 1; break; - case TYPE_WORM: case TYPE_ROM: + /* MMC devices can return SCSI-3 compliance and yet + * still not support REPORT LUNS, so make them act as + * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is + * specifically set */ + if ((*bflags & BLIST_REPORTLUN2) == 0) + *bflags |= BLIST_NOREPORTLUN; + /* fall through */ + case TYPE_WORM: sdev->writeable = 0; break; default: printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type); } - print_inquiry(inq_result); - /* * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI * spec says: The device server is capable of supporting the @@ -646,7 +786,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) * * The above is vague, as it implies that we could treat 001 and * 011 the same. Stay compatible with previous code, and create a - * Scsi_Device for a PQ of 1 + * scsi_device for a PQ of 1 * * Don't set the device offline here; rather let the upper * level drivers eval the PQ to decide whether they should @@ -666,12 +806,14 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) if (inq_result[7] & 0x10) sdev->sdtr = 1; - sprintf(sdev->devfs_name, "scsi/host%d/bus%d/target%d/lun%d", - sdev->host->host_no, sdev->channel, - sdev->id, sdev->lun); + sdev_printk(KERN_NOTICE, sdev, "%s %.8s %.16s %.4s PQ: %d " + "ANSI: %d%s\n", scsi_device_type(sdev->type), + sdev->vendor, sdev->model, sdev->rev, + sdev->inq_periph_qual, inq_result[2] & 0x07, + (inq_result[3] & 0x0f) == 1 ? " CCS" : ""); /* - * End driverfs/devfs code. + * End sysfs code. */ if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) && @@ -692,6 +834,13 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) if (*bflags & BLIST_SELECT_NO_ATN) sdev->select_no_atn = 1; + /* + * Maximum 512 sector transfer length + * broken RA4x00 Compaq Disk Array + */ + if (*bflags & BLIST_MAX_512) + blk_queue_max_sectors(sdev->request_queue, 512); + /* * Some devices may not want to have a start command automatically * issued when a device is added. @@ -729,25 +878,74 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) transport_configure_device(&sdev->sdev_gendev); - if (sdev->host->hostt->slave_configure) - sdev->host->hostt->slave_configure(sdev); + if (sdev->host->hostt->slave_configure) { + int ret = sdev->host->hostt->slave_configure(sdev); + if (ret) { + /* + * if LLDD reports slave not present, don't clutter + * console with alloc failure messages + */ + if (ret != -ENXIO) { + sdev_printk(KERN_ERR, sdev, + "failed to configure device\n"); + } + return SCSI_SCAN_NO_RESPONSE; + } + } /* * Ok, the device is now all set up, we can * register it and tell the rest of the kernel * about it. */ - scsi_sysfs_add_sdev(sdev); + if (!async && scsi_sysfs_add_sdev(sdev) != 0) + return SCSI_SCAN_NO_RESPONSE; return SCSI_SCAN_LUN_PRESENT; } +static inline void scsi_destroy_sdev(struct scsi_device *sdev) +{ + scsi_device_set_state(sdev, SDEV_DEL); + if (sdev->host->hostt->slave_destroy) + sdev->host->hostt->slave_destroy(sdev); + transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_gendev); +} + +#ifdef CONFIG_SCSI_LOGGING +/** + * scsi_inq_str - print INQUIRY data from min to max index, + * strip trailing whitespace + * @buf: Output buffer with at least end-first+1 bytes of space + * @inq: Inquiry buffer (input) + * @first: Offset of string into inq + * @end: Index after last character in inq + */ +static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq, + unsigned first, unsigned end) +{ + unsigned term = 0, idx; + + for (idx = 0; idx + first < end && idx + first < inq[4] + 5; idx++) { + if (inq[idx+first] > ' ') { + buf[idx] = inq[idx+first]; + term = idx+1; + } else { + buf[idx] = ' '; + } + } + buf[term] = 0; + return buf; +} +#endif + /** * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it * @starget: pointer to target device structure * @lun: LUN of target device - * @sdevscan: probe the LUN corresponding to this Scsi_Device - * @sdevnew: store the value of any new Scsi_Device allocated + * @sdevscan: probe the LUN corresponding to this scsi_device + * @sdevnew: store the value of any new scsi_device allocated * @bflagsp: store bflags here if not NULL * * Description: @@ -755,10 +953,10 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) * allocate and set it up by calling scsi_add_lun. * * Return: - * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device + * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is * attached at the LUN - * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized + * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized **/ static int scsi_probe_and_add_lun(struct scsi_target *starget, uint lun, int *bflagsp, @@ -766,18 +964,17 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, void *hostdata) { struct scsi_device *sdev; - struct scsi_request *sreq; unsigned char *result; - int bflags, res = SCSI_SCAN_NO_RESPONSE; + int bflags, res = SCSI_SCAN_NO_RESPONSE, result_len = 256; struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); /* * The rescan flag is used as an optimization, the first scan of a * host adapter calls into here with rescan == 0. */ - if (rescan) { - sdev = scsi_device_lookup_by_target(starget, lun); - if (sdev) { + sdev = scsi_device_lookup_by_target(starget, lun); + if (sdev) { + if (rescan || sdev->sdev_state != SDEV_CREATED) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: device exists on %s\n", sdev->sdev_gendev.bus_id)); @@ -792,27 +989,26 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, sdev->model); return SCSI_SCAN_LUN_PRESENT; } - } - - sdev = scsi_alloc_sdev(starget, lun, hostdata); + scsi_device_put(sdev); + } else + sdev = scsi_alloc_sdev(starget, lun, hostdata); if (!sdev) goto out; - sreq = scsi_allocate_request(sdev, GFP_ATOMIC); - if (!sreq) - goto out_free_sdev; - result = kmalloc(256, GFP_ATOMIC | + + result = kmalloc(result_len, GFP_ATOMIC | ((shost->unchecked_isa_dma) ? __GFP_DMA : 0)); if (!result) - goto out_free_sreq; + goto out_free_sdev; - scsi_probe_lun(sreq, result, &bflags); - if (sreq->sr_result) + if (scsi_probe_lun(sdev, result, result_len, &bflags)) goto out_free_result; + if (bflagsp) + *bflagsp = bflags; /* * result contains valid SCSI INQUIRY data. */ - if ((result[0] >> 5) == 3) { + if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) { /* * For a Peripheral qualifier 3 (011b), the SCSI * spec says: The device server is not capable of @@ -823,39 +1019,76 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * logical disk configured at sdev->lun, but there * is a target id responding. */ + SCSI_LOG_SCAN_BUS(2, sdev_printk(KERN_INFO, sdev, "scsi scan:" + " peripheral qualifier of 3, device not" + " added\n")) + if (lun == 0) { + SCSI_LOG_SCAN_BUS(1, { + unsigned char vend[9]; + unsigned char mod[17]; + + sdev_printk(KERN_INFO, sdev, + "scsi scan: consider passing scsi_mod." + "dev_flags=%s:%s:0x240 or 0x800240\n", + scsi_inq_str(vend, result, 8, 16), + scsi_inq_str(mod, result, 16, 32)); + }); + } + + res = SCSI_SCAN_TARGET_PRESENT; + goto out_free_result; + } + + /* + * Some targets may set slight variations of PQ and PDT to signal + * that no LUN is present, so don't add sdev in these cases. + * Two specific examples are: + * 1) NetApp targets: return PQ=1, PDT=0x1f + * 2) USB UFI: returns PDT=0x1f, with the PQ bits being "reserved" + * in the UFI 1.0 spec (we cannot rely on reserved bits). + * + * References: + * 1) SCSI SPC-3, pp. 145-146 + * PQ=1: "A peripheral device having the specified peripheral + * device type is not connected to this logical unit. However, the + * device server is capable of supporting the specified peripheral + * device type on this logical unit." + * PDT=0x1f: "Unknown or no device type" + * 2) USB UFI 1.0, p. 20 + * PDT=00h Direct-access device (floppy) + * PDT=1Fh none (no FDD connected to the requested logical unit) + */ + if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) && + (result[0] & 0x1f) == 0x1f) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO - "scsi scan: peripheral qualifier of 3," - " no device added\n")); + "scsi scan: peripheral device type" + " of 31, no device added\n")); res = SCSI_SCAN_TARGET_PRESENT; goto out_free_result; } - res = scsi_add_lun(sdev, result, &bflags); + res = scsi_add_lun(sdev, result, &bflags, shost->async_scan); if (res == SCSI_SCAN_LUN_PRESENT) { if (bflags & BLIST_KEY) { sdev->lockable = 0; - scsi_unlock_floptical(sreq, result); + scsi_unlock_floptical(sdev, result); } - if (bflagsp) - *bflagsp = bflags; } out_free_result: kfree(result); - out_free_sreq: - scsi_release_request(sreq); out_free_sdev: if (res == SCSI_SCAN_LUN_PRESENT) { if (sdevp) { - scsi_device_get(sdev); - *sdevp = sdev; + if (scsi_device_get(sdev) == 0) { + *sdevp = sdev; + } else { + __scsi_remove_device(sdev); + res = SCSI_SCAN_NO_RESPONSE; + } } - } else { - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_gendev); - } + } else + scsi_destroy_sdev(sdev); out: return res; } @@ -864,7 +1097,6 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * scsi_sequential_lun_scan - sequentially scan a SCSI target * @starget: pointer to target structure to scan * @bflags: black/white list flag for LUN 0 - * @lun0_res: result of scanning LUN 0 * * Description: * Generally, scan from LUN 1 (LUN 0 is assumed to already have been @@ -874,8 +1106,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * Modifies sdevscan->lun. **/ static void scsi_sequential_lun_scan(struct scsi_target *starget, - int bflags, int lun0_res, int scsi_level, - int rescan) + int bflags, int scsi_level, int rescan) { unsigned int sparse_lun, lun, max_dev_lun; struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -895,13 +1126,6 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget, } else sparse_lun = 0; - /* - * If not sparse lun and no device attached at LUN 0 do not scan - * any further. - */ - if (!sparse_lun && (lun0_res != SCSI_SCAN_LUN_PRESENT)) - return; - /* * If less than SCSI_1_CSS, and no special lun scaning, stop * scanning; this matches 2.4 behaviour, but could just be a bug @@ -980,9 +1204,41 @@ static int scsilun_to_int(struct scsi_lun *scsilun) return lun; } +/** + * int_to_scsilun: reverts an int into a scsi_lun + * @int: integer to be reverted + * @scsilun: struct scsi_lun to be set. + * + * Description: + * Reverts the functionality of the scsilun_to_int, which packed + * an 8-byte lun value into an int. This routine unpacks the int + * back into the lun value. + * Note: the scsilun_to_int() routine does not truly handle all + * 8bytes of the lun value. This functions restores only as much + * as was set by the routine. + * + * Notes: + * Given an integer : 0x0b030a04, this function returns a + * scsi_lun of : struct scsi_lun of: 0a 04 0b 03 00 00 00 00 + * + **/ +void int_to_scsilun(unsigned int lun, struct scsi_lun *scsilun) +{ + int i; + + memset(scsilun->scsi_lun, 0, sizeof(scsilun->scsi_lun)); + + for (i = 0; i < sizeof(lun); i += 2) { + scsilun->scsi_lun[i] = (lun >> 8) & 0xFF; + scsilun->scsi_lun[i+1] = lun & 0xFF; + lun = lun >> 16; + } +} +EXPORT_SYMBOL(int_to_scsilun); + /** * scsi_report_lun_scan - Scan using SCSI REPORT LUN results - * @sdevscan: scan the host, channel, and id of this Scsi_Device + * @sdevscan: scan the host, channel, and id of this scsi_device * * Description: * If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN @@ -995,7 +1251,7 @@ static int scsilun_to_int(struct scsi_lun *scsilun) * 0: scan completed (or no memory, so further scanning is futile) * 1: no report lun scan, or not configured **/ -static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, +static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, int rescan) { char devname[64]; @@ -1004,31 +1260,40 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, unsigned int lun; unsigned int num_luns; unsigned int retries; + int result; struct scsi_lun *lunp, *lun_data; - struct scsi_request *sreq; u8 *data; struct scsi_sense_hdr sshdr; - struct scsi_target *starget = scsi_target(sdev); + struct scsi_device *sdev; + struct Scsi_Host *shost = dev_to_shost(&starget->dev); + int ret = 0; /* * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set. * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does * support more than 8 LUNs. */ - if ((bflags & BLIST_NOREPORTLUN) || - sdev->scsi_level < SCSI_2 || - (sdev->scsi_level < SCSI_3 && - (!(bflags & BLIST_REPORTLUN2) || sdev->host->max_lun <= 8)) ) + if (bflags & BLIST_NOREPORTLUN) + return 1; + if (starget->scsi_level < SCSI_2 && + starget->scsi_level != SCSI_UNKNOWN) + return 1; + if (starget->scsi_level < SCSI_3 && + (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) return 1; if (bflags & BLIST_NOLUN) return 0; - sreq = scsi_allocate_request(sdev, GFP_ATOMIC); - if (!sreq) - goto out; + if (!(sdev = scsi_device_lookup_by_target(starget, 0))) { + sdev = scsi_alloc_sdev(starget, 0, NULL); + if (!sdev) + return 0; + if (scsi_device_get(sdev)) + return 0; + } sprintf(devname, "host %d channel %d id %d", - sdev->host->host_no, sdev->channel, sdev->id); + shost->host_no, sdev->channel, sdev->id); /* * Allocate enough to hold the header (the same size as one scsi_lun) @@ -1043,8 +1308,10 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun); lun_data = kmalloc(length, GFP_ATOMIC | (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0)); - if (!lun_data) - goto out_release_request; + if (!lun_data) { + printk(ALLOC_FAILURE_MSG, __FUNCTION__); + goto out; + } scsi_cmd[0] = REPORT_LUNS; @@ -1063,8 +1330,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, scsi_cmd[10] = 0; /* reserved */ scsi_cmd[11] = 0; /* control */ - sreq->sr_cmd_len = 0; - sreq->sr_data_direction = DMA_FROM_DEVICE; /* * We can get a UNIT ATTENTION, for example a power on/reset, so @@ -1080,29 +1345,29 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending" " REPORT LUNS to %s (try %d)\n", devname, retries)); - scsi_wait_req(sreq, scsi_cmd, lun_data, length, - SCSI_TIMEOUT + 4*HZ, 3); + + result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, + lun_data, length, &sshdr, + SCSI_TIMEOUT + 4 * HZ, 3); + SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS" - " %s (try %d) result 0x%x\n", sreq->sr_result - ? "failed" : "successful", retries, - sreq->sr_result)); - if (sreq->sr_result == 0) + " %s (try %d) result 0x%x\n", result + ? "failed" : "successful", retries, result)); + if (result == 0) break; - else if (scsi_request_normalize_sense(sreq, &sshdr)) { + else if (scsi_sense_valid(&sshdr)) { if (sshdr.sense_key != UNIT_ATTENTION) break; } } - if (sreq->sr_result) { + if (result) { /* * The device probably does not support a REPORT LUN command */ - kfree(lun_data); - scsi_release_request(sreq); - return 1; + ret = 1; + goto out_err; } - scsi_release_request(sreq); /* * Get the length from the first four bytes of lun_data. @@ -1120,9 +1385,8 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, num_luns = max_scsi_report_luns; } - SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUN scan of" - " host %d channel %d id %d\n", sdev->host->host_no, - sdev->channel, sdev->id)); + SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev, + "scsi scan: REPORT LUN scan\n")); /* * Scan the luns in lun_data. The entry at offset 0 is really @@ -1148,10 +1412,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, for (i = 0; i < sizeof(struct scsi_lun); i++) printk("%02x", data[i]); printk(" has a LUN larger than currently supported.\n"); - } else if (lun == 0) { - /* - * LUN 0 has already been scanned. - */ } else if (lun > sdev->host->max_lun) { printk(KERN_WARNING "scsi: %s lun%d has a LUN larger" " than allowed by the host adapter\n", @@ -1165,44 +1425,48 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, /* * Got some results, but now none, abort. */ - printk(KERN_ERR "scsi: Unexpected response" - " from %s lun %d while scanning, scan" - " aborted\n", devname, lun); + sdev_printk(KERN_ERR, sdev, + "Unexpected response" + " from lun %d while scanning, scan" + " aborted\n", lun); break; } } } + out_err: kfree(lun_data); - return 0; - - out_release_request: - scsi_release_request(sreq); out: - /* - * We are out of memory, don't try scanning any further. - */ - printk(ALLOC_FAILURE_MSG, __FUNCTION__); - return 0; + scsi_device_put(sdev); + if (sdev->sdev_state == SDEV_CREATED) + /* + * the sdev we used didn't appear in the report luns scan + */ + scsi_destroy_sdev(sdev); + return ret; } struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, uint id, uint lun, void *hostdata) { - struct scsi_device *sdev; + struct scsi_device *sdev = ERR_PTR(-ENODEV); struct device *parent = &shost->shost_gendev; - int res; - struct scsi_target *starget = scsi_alloc_target(parent, channel, id); + struct scsi_target *starget; + + if (strncmp(scsi_scan_type, "none", 4) == 0) + return ERR_PTR(-ENODEV); + if (!shost->async_scan) + scsi_complete_async_scans(); + + starget = scsi_alloc_target(parent, channel, id); if (!starget) return ERR_PTR(-ENOMEM); - get_device(&starget->dev); - down(&shost->scan_mutex); - res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); - if (res != SCSI_SCAN_LUN_PRESENT) - sdev = ERR_PTR(-ENODEV); - up(&shost->scan_mutex); + mutex_lock(&shost->scan_mutex); + if (scsi_host_scan_allowed(shost)) + scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); + mutex_unlock(&shost->scan_mutex); scsi_target_reap(starget); put_device(&starget->dev); @@ -1210,6 +1474,19 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, } EXPORT_SYMBOL(__scsi_add_device); +int scsi_add_device(struct Scsi_Host *host, uint channel, + uint target, uint lun) +{ + struct scsi_device *sdev = + __scsi_add_device(host, channel, target, lun, NULL); + if (IS_ERR(sdev)) + return PTR_ERR(sdev); + + scsi_device_put(sdev); + return 0; +} +EXPORT_SYMBOL(scsi_add_device); + void scsi_rescan_device(struct device *dev) { struct scsi_driver *drv; @@ -1226,32 +1503,12 @@ void scsi_rescan_device(struct device *dev) } EXPORT_SYMBOL(scsi_rescan_device); -/** - * scsi_scan_target - scan a target id, possibly including all LUNs on the - * target. - * @sdevsca: Scsi_Device handle for scanning - * @shost: host to scan - * @channel: channel to scan - * @id: target id to scan - * - * Description: - * Scan the target id on @shost, @channel, and @id. Scan at least LUN - * 0, and possibly all LUNs on the target id. - * - * Use the pre-allocated @sdevscan as a handle for the scanning. This - * function sets sdevscan->host, sdevscan->id and sdevscan->lun; the - * scanning functions modify sdevscan->lun. - * - * First try a REPORT LUN scan, if that does not scan the target, do a - * sequential scan of LUNs on the target id. - **/ -void scsi_scan_target(struct device *parent, unsigned int channel, - unsigned int id, unsigned int lun, int rescan) +static void __scsi_scan_target(struct device *parent, unsigned int channel, + unsigned int id, unsigned int lun, int rescan) { struct Scsi_Host *shost = dev_to_shost(parent); int bflags = 0; int res; - struct scsi_device *sdev = NULL; struct scsi_target *starget; if (shost->this_id == id) @@ -1260,13 +1517,10 @@ void scsi_scan_target(struct device *parent, unsigned int channel, */ return; - starget = scsi_alloc_target(parent, channel, id); - if (!starget) return; - get_device(&starget->dev); if (lun != SCAN_WILD_CARD) { /* * Scan for a specific host/chan/id/lun. @@ -1279,27 +1533,16 @@ void scsi_scan_target(struct device *parent, unsigned int channel, * Scan LUN 0, if there is some response, scan further. Ideally, we * would not configure LUN 0 until all LUNs are scanned. */ - res = scsi_probe_and_add_lun(starget, 0, &bflags, &sdev, rescan, NULL); - if (res == SCSI_SCAN_LUN_PRESENT) { - if (scsi_report_lun_scan(sdev, bflags, rescan) != 0) + res = scsi_probe_and_add_lun(starget, 0, &bflags, NULL, rescan, NULL); + if (res == SCSI_SCAN_LUN_PRESENT || res == SCSI_SCAN_TARGET_PRESENT) { + if (scsi_report_lun_scan(starget, bflags, rescan) != 0) /* * The REPORT LUN did not scan the target, * do a sequential scan. */ scsi_sequential_lun_scan(starget, bflags, - res, sdev->scsi_level, rescan); - } else if (res == SCSI_SCAN_TARGET_PRESENT) { - /* - * There's a target here, but lun 0 is offline so we - * can't use the report_lun scan. Fall back to a - * sequential lun scan with a bflags of SPARSELUN and - * a default scsi level of SCSI_2 - */ - scsi_sequential_lun_scan(starget, BLIST_SPARSELUN, - SCSI_SCAN_TARGET_PRESENT, SCSI_2, rescan); + starget->scsi_level, rescan); } - if (sdev) - scsi_device_put(sdev); out_reap: /* now determine if the target has any children at all @@ -1308,6 +1551,39 @@ void scsi_scan_target(struct device *parent, unsigned int channel, put_device(&starget->dev); } + +/** + * scsi_scan_target - scan a target id, possibly including all LUNs on the + * target. + * @parent: host to scan + * @channel: channel to scan + * @id: target id to scan + * @lun: Specific LUN to scan or SCAN_WILD_CARD + * @rescan: passed to LUN scanning routines + * + * Description: + * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0, + * and possibly all LUNs on the target id. + * + * First try a REPORT LUN scan, if that does not scan the target, do a + * sequential scan of LUNs on the target id. + **/ +void scsi_scan_target(struct device *parent, unsigned int channel, + unsigned int id, unsigned int lun, int rescan) +{ + struct Scsi_Host *shost = dev_to_shost(parent); + + if (strncmp(scsi_scan_type, "none", 4) == 0) + return; + + if (!shost->async_scan) + scsi_complete_async_scans(); + + mutex_lock(&shost->scan_mutex); + if (scsi_host_scan_allowed(shost)) + __scsi_scan_target(parent, channel, id, lun, rescan); + mutex_unlock(&shost->scan_mutex); +} EXPORT_SYMBOL(scsi_scan_target); static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel, @@ -1333,77 +1609,197 @@ static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel, order_id = shost->max_id - id - 1; else order_id = id; - scsi_scan_target(&shost->shost_gendev, channel, order_id, lun, rescan); + __scsi_scan_target(&shost->shost_gendev, channel, + order_id, lun, rescan); } else - scsi_scan_target(&shost->shost_gendev, channel, id, lun, rescan); + __scsi_scan_target(&shost->shost_gendev, channel, + id, lun, rescan); } int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel, unsigned int id, unsigned int lun, int rescan) { - SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "%s: <%u:%u:%u:%u>\n", - __FUNCTION__, shost->host_no, channel, id, lun)); + SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost, + "%s: <%u:%u:%u>\n", + __FUNCTION__, channel, id, lun)); + + if (!shost->async_scan) + scsi_complete_async_scans(); if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) || - ((id != SCAN_WILD_CARD) && (id > shost->max_id)) || + ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) || ((lun != SCAN_WILD_CARD) && (lun > shost->max_lun))) return -EINVAL; - down(&shost->scan_mutex); - if (channel == SCAN_WILD_CARD) - for (channel = 0; channel <= shost->max_channel; channel++) + mutex_lock(&shost->scan_mutex); + if (scsi_host_scan_allowed(shost)) { + if (channel == SCAN_WILD_CARD) + for (channel = 0; channel <= shost->max_channel; + channel++) + scsi_scan_channel(shost, channel, id, lun, + rescan); + else scsi_scan_channel(shost, channel, id, lun, rescan); - else - scsi_scan_channel(shost, channel, id, lun, rescan); - up(&shost->scan_mutex); + } + mutex_unlock(&shost->scan_mutex); return 0; } +static void scsi_sysfs_add_devices(struct Scsi_Host *shost) +{ + struct scsi_device *sdev; + shost_for_each_device(sdev, shost) { + if (scsi_sysfs_add_sdev(sdev) != 0) + scsi_destroy_sdev(sdev); + } +} + /** - * scsi_scan_host - scan the given adapter - * @shost: adapter to scan - **/ -void scsi_scan_host(struct Scsi_Host *shost) + * scsi_prep_async_scan - prepare for an async scan + * @shost: the host which will be scanned + * Returns: a cookie to be passed to scsi_finish_async_scan() + * + * Tells the midlayer this host is going to do an asynchronous scan. + * It reserves the host's position in the scanning list and ensures + * that other asynchronous scans started after this one won't affect the + * ordering of the discovered devices. + */ +static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost) { - scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD, + struct async_scan_data *data; + + if (strncmp(scsi_scan_type, "sync", 4) == 0) + return NULL; + + if (shost->async_scan) { + printk("%s called twice for host %d", __FUNCTION__, + shost->host_no); + dump_stack(); + return NULL; + } + + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) + goto err; + data->shost = scsi_host_get(shost); + if (!data->shost) + goto err; + init_completion(&data->prev_finished); + + spin_lock(&async_scan_lock); + shost->async_scan = 1; + if (list_empty(&scanning_hosts)) + complete(&data->prev_finished); + list_add_tail(&data->list, &scanning_hosts); + spin_unlock(&async_scan_lock); + + return data; + + err: + kfree(data); + return NULL; +} + +/** + * scsi_finish_async_scan - asynchronous scan has finished + * @data: cookie returned from earlier call to scsi_prep_async_scan() + * + * All the devices currently attached to this host have been found. + * This function announces all the devices it has found to the rest + * of the system. + */ +static void scsi_finish_async_scan(struct async_scan_data *data) +{ + struct Scsi_Host *shost; + + if (!data) + return; + + shost = data->shost; + if (!shost->async_scan) { + printk("%s called twice for host %d", __FUNCTION__, + shost->host_no); + dump_stack(); + return; + } + + wait_for_completion(&data->prev_finished); + + scsi_sysfs_add_devices(shost); + + spin_lock(&async_scan_lock); + shost->async_scan = 0; + list_del(&data->list); + if (!list_empty(&scanning_hosts)) { + struct async_scan_data *next = list_entry(scanning_hosts.next, + struct async_scan_data, list); + complete(&next->prev_finished); + } + spin_unlock(&async_scan_lock); + + scsi_host_put(shost); + kfree(data); +} + +static void do_scsi_scan_host(struct Scsi_Host *shost) +{ + if (shost->hostt->scan_finished) { + unsigned long start = jiffies; + if (shost->hostt->scan_start) + shost->hostt->scan_start(shost); + + while (!shost->hostt->scan_finished(shost, jiffies - start)) + msleep(10); + } else { + scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD, SCAN_WILD_CARD, 0); + } +} + +static int do_scan_async(void *_data) +{ + struct async_scan_data *data = _data; + do_scsi_scan_host(data->shost); + scsi_finish_async_scan(data); + return 0; } -EXPORT_SYMBOL(scsi_scan_host); /** - * scsi_scan_single_target - scan the given SCSI target - * @shost: adapter to scan - * @chan: channel to scan - * @id: target id to scan + * scsi_scan_host - scan the given adapter + * @shost: adapter to scan **/ -void scsi_scan_single_target(struct Scsi_Host *shost, - unsigned int chan, unsigned int id) +void scsi_scan_host(struct Scsi_Host *shost) { - scsi_scan_host_selected(shost, chan, id, SCAN_WILD_CARD, 1); + struct async_scan_data *data; + + if (strncmp(scsi_scan_type, "none", 4) == 0) + return; + + data = scsi_prep_async_scan(shost); + if (!data) { + do_scsi_scan_host(shost); + return; + } + + kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no); } -EXPORT_SYMBOL(scsi_scan_single_target); +EXPORT_SYMBOL(scsi_scan_host); void scsi_forget_host(struct Scsi_Host *shost) { - struct scsi_target *starget, *tmp; + struct scsi_device *sdev; unsigned long flags; - /* - * Ok, this look a bit strange. We always look for the first device - * on the list as scsi_remove_device removes them from it - thus we - * also have to release the lock. - * We don't need to get another reference to the device before - * releasing the lock as we already own the reference from - * scsi_register_device that's release in scsi_remove_device. And - * after that we don't look at sdev anymore. - */ + restart: spin_lock_irqsave(shost->host_lock, flags); - list_for_each_entry_safe(starget, tmp, &shost->__targets, siblings) { + list_for_each_entry(sdev, &shost->__devices, siblings) { + if (sdev->sdev_state == SDEV_DEL) + continue; spin_unlock_irqrestore(shost->host_lock, flags); - scsi_remove_target(&starget->dev); - spin_lock_irqsave(shost->host_lock, flags); + __scsi_remove_device(sdev); + goto restart; } spin_unlock_irqrestore(shost->host_lock, flags); } @@ -1411,16 +1807,16 @@ void scsi_forget_host(struct Scsi_Host *shost) /* * Function: scsi_get_host_dev() * - * Purpose: Create a Scsi_Device that points to the host adapter itself. + * Purpose: Create a scsi_device that points to the host adapter itself. * - * Arguments: SHpnt - Host that needs a Scsi_Device + * Arguments: SHpnt - Host that needs a scsi_device * * Lock status: None assumed. * - * Returns: The Scsi_Device or NULL + * Returns: The scsi_device or NULL * * Notes: - * Attach a single Scsi_Device to the Scsi_Host - this should + * Attach a single scsi_device to the Scsi_Host - this should * be made to look like a "pseudo-device" that points to the * HA itself. * @@ -1430,19 +1826,25 @@ void scsi_forget_host(struct Scsi_Host *shost) */ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost) { - struct scsi_device *sdev; + struct scsi_device *sdev = NULL; struct scsi_target *starget; + mutex_lock(&shost->scan_mutex); + if (!scsi_host_scan_allowed(shost)) + goto out; starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id); if (!starget) - return NULL; + goto out; sdev = scsi_alloc_sdev(starget, 0, NULL); if (sdev) { sdev->sdev_gendev.parent = get_device(&starget->dev); sdev->borken = 0; - } + } else + scsi_target_reap(starget); put_device(&starget->dev); + out: + mutex_unlock(&shost->scan_mutex); return sdev; } EXPORT_SYMBOL(scsi_get_host_dev); @@ -1452,7 +1854,7 @@ EXPORT_SYMBOL(scsi_get_host_dev); * * Purpose: Free a scsi_device that points to the host adapter itself. * - * Arguments: SHpnt - Host that needs a Scsi_Device + * Arguments: SHpnt - Host that needs a scsi_device * * Lock status: None assumed. * @@ -1464,10 +1866,7 @@ void scsi_free_host_dev(struct scsi_device *sdev) { BUG_ON(sdev->id != sdev->host->this_id); - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_gendev); + scsi_destroy_sdev(sdev); } EXPORT_SYMBOL(scsi_free_host_dev);