X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fserial%2F8250.c;h=545f50802cdf0c065d6c359ddf5158ccb5e8a8d4;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=7aca22c9976d0f37a9d8f3e0b0cf6a41d6a3d787;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 7aca22c99..545f50802 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -7,6 +7,9 @@ * * Copyright (C) 2001 Russell King. * + * 2005/09/16: Enabled higher baud rates for 16C95x. + * (Mathias Adam ) + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -19,7 +22,6 @@ * mapbase is the physical address of the IO port. * membase is an 'ioremapped' cookie. */ -#include #if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -49,7 +51,7 @@ /* * Configuration: - * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option * is unsafe when used on edge-triggered interrupts. */ static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; @@ -300,6 +302,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) static unsigned int serial_in(struct uart_8250_port *up, int offset) { + unsigned int tmp; offset = map_8250_in_reg(up, offset) << up->port.regshift; switch (up->port.iotype) { @@ -318,6 +321,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) return __raw_readl(up->port.membase + offset); #endif + case UPIO_TSI: + if (offset == UART_IIR) { + tmp = readl(up->port.membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(up->port.membase + offset); + default: return inb(up->port.iobase + offset); } @@ -347,6 +357,10 @@ serial_out(struct uart_8250_port *up, int offset, int value) __raw_writel(value, up->port.membase + offset); break; #endif + case UPIO_TSI: + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, up->port.membase + offset); + break; default: outb(value, up->port.iobase + offset); @@ -362,6 +376,40 @@ serial_out(struct uart_8250_port *up, int offset, int value) #define serial_inp(up, offset) serial_in(up, offset) #define serial_outp(up, offset, value) serial_out(up, offset, value) +/* Uart divisor latch read */ +static inline int _serial_dl_read(struct uart_8250_port *up) +{ + return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; +} + +/* Uart divisor latch write */ +static inline void _serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_outp(up, UART_DLL, value & 0xff); + serial_outp(up, UART_DLM, value >> 8 & 0xff); +} + +#ifdef CONFIG_SERIAL_8250_AU1X00 +/* Au1x00 haven't got a standard divisor latch */ +static int serial_dl_read(struct uart_8250_port *up) +{ + if (up->port.iotype == UPIO_AU) + return __raw_readl(up->port.membase + 0x28); + else + return _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_AU) + __raw_writel(value, up->port.membase + 0x28); + else + _serial_dl_write(up, value); +} +#else +#define serial_dl_read(up) _serial_dl_read(up) +#define serial_dl_write(up, value) _serial_dl_write(up, value) +#endif /* * For the 16C950 @@ -494,7 +542,8 @@ static void disable_rsa(struct uart_8250_port *up) */ static int size_fifo(struct uart_8250_port *up) { - unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr; + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; int count; old_lcr = serial_inp(up, UART_LCR); @@ -505,10 +554,8 @@ static int size_fifo(struct uart_8250_port *up) UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_outp(up, UART_MCR, UART_MCR_LOOP); serial_outp(up, UART_LCR, UART_LCR_DLAB); - old_dll = serial_inp(up, UART_DLL); - old_dlm = serial_inp(up, UART_DLM); - serial_outp(up, UART_DLL, 0x01); - serial_outp(up, UART_DLM, 0x00); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); serial_outp(up, UART_LCR, 0x03); for (count = 0; count < 256; count++) serial_outp(up, UART_TX, count); @@ -519,8 +566,7 @@ static int size_fifo(struct uart_8250_port *up) serial_outp(up, UART_FCR, old_fcr); serial_outp(up, UART_MCR, old_mcr); serial_outp(up, UART_LCR, UART_LCR_DLAB); - serial_outp(up, UART_DLL, old_dll); - serial_outp(up, UART_DLM, old_dlm); + serial_dl_write(up, old_dl); serial_outp(up, UART_LCR, old_lcr); return count; @@ -750,8 +796,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) serial_outp(up, UART_LCR, 0xE0); - quot = serial_inp(up, UART_DLM) << 8; - quot += serial_inp(up, UART_DLL); + quot = serial_dl_read(up); quot <<= 3; status1 = serial_in(up, 0x04); /* EXCR1 */ @@ -759,8 +804,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ serial_outp(up, 0x04, status1); - serial_outp(up, UART_DLL, quot & 0xff); - serial_outp(up, UART_DLM, quot >> 8); + serial_dl_write(up, quot); serial_outp(up, UART_LCR, 0); @@ -1134,7 +1178,7 @@ static void serial8250_enable_ms(struct uart_port *port) } static void -receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) +receive_chars(struct uart_8250_port *up, int *status) { struct tty_struct *tty = up->port.info->tty; unsigned char ch, lsr = *status; @@ -1192,7 +1236,7 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) else if (lsr & UART_LSR_FE) flag = TTY_FRAME; } - if (uart_handle_sysrq_char(&up->port, ch, regs)) + if (uart_handle_sysrq_char(&up->port, ch)) goto ignore_char; uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); @@ -1248,7 +1292,8 @@ static unsigned int check_modem_status(struct uart_8250_port *up) { unsigned int status = serial_in(up, UART_MSR); - if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI) { + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.info != NULL) { if (status & UART_MSR_TERI) up->port.icount.rng++; if (status & UART_MSR_DDSR) @@ -1268,7 +1313,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up) * This handles the interrupt from one port. */ static inline void -serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs) +serial8250_handle_port(struct uart_8250_port *up) { unsigned int status; @@ -1279,7 +1324,7 @@ serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs) DEBUG_INTR("status = %x...", status); if (status & UART_LSR_DR) - receive_chars(up, &status, regs); + receive_chars(up, &status); check_modem_status(up); if (status & UART_LSR_THRE) transmit_chars(up); @@ -1301,7 +1346,7 @@ serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs) * This means we need to loop through all ports. checking that they * don't have an interrupt pending. */ -static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t serial8250_interrupt(int irq, void *dev_id) { struct irq_info *i = dev_id; struct list_head *l, *end = NULL; @@ -1320,7 +1365,7 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *r iir = serial_in(up, UART_IIR); if (!(iir & UART_IIR_NO_INT)) { - serial8250_handle_port(up, regs); + serial8250_handle_port(up); handled = 1; @@ -1371,7 +1416,7 @@ static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) static int serial_link_irq_chain(struct uart_8250_port *up) { struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; spin_lock_irq(&i->lock); @@ -1420,7 +1465,7 @@ static void serial8250_timeout(unsigned long data) iir = serial_in(up, UART_IIR); if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up, NULL); + serial8250_handle_port(up); timeout = up->port.timeout; timeout = timeout > 6 ? (timeout / 2 - 2) : 1; @@ -1528,7 +1573,7 @@ static int serial8250_startup(struct uart_port *port) /* * Clear the FIFO buffers and disable them. - * (they will be reeanbled in set_termios()) + * (they will be reenabled in set_termios()) */ serial8250_clear_fifos(up); @@ -1715,6 +1760,14 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int else if ((port->flags & UPF_MAGIC_MULTIPLIER) && baud == (port->uartclk/8)) quot = 0x8002; + /* + * For 16C950s UART_TCR is used in combination with divisor==1 + * to achieve baud rates up to baud_base*4. + */ + else if ((port->type == PORT_16C950) && + baud > (port->uartclk/16)) + quot = 1; + else quot = uart_get_divisor(port, baud); @@ -1722,13 +1775,13 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int } static void -serial8250_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned char cval, fcr = 0; unsigned long flags; - unsigned int baud, quot; + unsigned int baud, quot, max_baud; switch (termios->c_cflag & CSIZE) { case CS5: @@ -1760,7 +1813,8 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + max_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : port->uartclk/16); + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); quot = serial8250_get_divisor(port, baud); /* @@ -1796,6 +1850,19 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, */ spin_lock_irqsave(&up->port.lock, flags); + /* + * 16C950 supports additional prescaler ratios between 1:16 and 1:4 + * thus increasing max baud rate to uartclk/4. + */ + if (up->port.type == PORT_16C950) { + if (baud == port->uartclk/4) + serial_icr_write(up, UART_TCR, 0x4); + else if (baud == port->uartclk/8) + serial_icr_write(up, UART_TCR, 0x8); + else + serial_icr_write(up, UART_TCR, 0); + } + /* * Update the per-port timeout. */ @@ -1855,6 +1922,17 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, serial_outp(up, UART_EFR, efr); } +#ifdef CONFIG_ARCH_OMAP15XX + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) { + if (baud == 115200) { + quot = 1; + serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + } +#endif + if (up->capabilities & UART_NATSEMI) { /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ serial_outp(up, UART_LCR, 0xe0); @@ -1862,8 +1940,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ } - serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_dl_write(up, quot); /* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR @@ -1906,6 +1983,11 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) int ret = 0; switch (up->port.iotype) { + case UPIO_AU: + size = 0x100000; + /* fall thru */ + case UPIO_TSI: + case UPIO_MEM32: case UPIO_MEM: if (!up->port.mapbase) break; @@ -1938,6 +2020,11 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) unsigned int size = 8 << up->port.regshift; switch (up->port.iotype) { + case UPIO_AU: + size = 0x100000; + /* fall thru */ + case UPIO_TSI: + case UPIO_MEM32: case UPIO_MEM: if (!up->port.mapbase) break; @@ -1961,17 +2048,15 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up) { unsigned long start = UART_RSA_BASE << up->port.regshift; unsigned int size = 8 << up->port.regshift; - int ret = 0; + int ret = -EINVAL; switch (up->port.iotype) { - case UPIO_MEM: - ret = -EINVAL; - break; - case UPIO_HUB6: case UPIO_PORT: start += up->port.iobase; - if (!request_region(start, size, "serial-rsa")) + if (request_region(start, size, "serial-rsa")) + ret = 0; + else ret = -EBUSY; break; } @@ -1985,9 +2070,6 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up) unsigned int size = 8 << up->port.regshift; switch (up->port.iotype) { - case UPIO_MEM: - break; - case UPIO_HUB6: case UPIO_PORT: release_region(up->port.iobase + offset, size); @@ -2176,12 +2258,21 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits) /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) { udelay(1); + touch_nmi_watchdog(); + } } } +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out(up, UART_TX, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -2192,11 +2283,21 @@ static void serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned long flags; unsigned int ier; - int i; + int locked = 1; touch_nmi_watchdog(); + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + /* * First save the IER then disable the interrupts */ @@ -2207,33 +2308,21 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) else serial_out(up, UART_IER, 0); - /* - * Now, do each character - */ - for (i = 0; i < count; i++, s++) { - wait_for_xmitr(up, UART_LSR_THRE); - - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, *s); - if (*s == 10) { - wait_for_xmitr(up, UART_LSR_THRE); - serial_out(up, UART_TX, 13); - } - } + uart_console_write(&up->port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty * and restore the IER */ wait_for_xmitr(up, BOTH_EMPTY); - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, ier | UART_IER_THRI); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); } -static int serial8250_console_setup(struct console *co, char *options) +static int __init serial8250_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; @@ -2318,7 +2407,6 @@ int __init serial8250_start_console(struct uart_port *port, char *options) static struct uart_driver serial8250_reg = { .owner = THIS_MODULE, .driver_name = "serial", - .devfs_name = "tts/", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, @@ -2346,7 +2434,6 @@ int __init early_serial_setup(struct uart_port *port) /** * serial8250_suspend_port - suspend one serial port * @line: serial line number - * @level: the level of port suspension, as per uart_suspend_port * * Suspend one serial port. */ @@ -2358,7 +2445,6 @@ void serial8250_suspend_port(int line) /** * serial8250_resume_port - resume one serial port * @line: serial line number - * @level: the level of port resumption, as per uart_resume_port * * Resume one serial port. */