X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fserial%2Fcpm_uart%2Fcpm_uart_cpm1.c;h=08e55fdc882a87b004e1fd8a04bf334c7e0b708e;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=a9ab04731a36ba6027c5746d6328364e6f840397;hpb=9bf4aaab3e101692164d49b7ca357651eb691cb6;p=linux-2.6.git

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index a9ab04731..08e55fdc8 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -3,11 +3,13 @@
  *
  *  Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
  *
- *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
- * 
+ *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,7 +27,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
@@ -81,18 +82,11 @@ void cpm_line_cr_cmd(int line, int cmd)
 
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile cpm8xx_t *cp = cpmp;
-
-	cp->cp_pbpar |= 0x000000c0;
-	cp->cp_pbdir &= ~0x000000c0;
-	cp->cp_pbodr &= ~0x000000c0;
-
 	pinfo->brg = 1;
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-	/* XXX SMC2: insert port configuration here */
 	pinfo->brg = 2;
 }
 
@@ -121,7 +115,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
 }
 
 /*
- * Allocate DP-Ram and memory buffers. We need to allocate a transmit and 
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
  * buffer area from host mem. If we are allocating for the console we need
  * to do it from bootmem
@@ -148,8 +142,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
 	if (is_con) {
-		mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
-		dma_addr = 0;
+		/* was hostalloc but changed cause it blows away the */
+		/* large tlb mapping when pinning the kernel area    */
+		mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
+		dma_addr = (u32)mem_addr;
 	} else
 		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 					      GFP_KERNEL);
@@ -162,8 +158,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	}
 
 	pinfo->dp_addr = dp_offset;
-	pinfo->mem_addr = mem_addr;
-	pinfo->dma_addr = dma_addr;
+	pinfo->mem_addr = mem_addr;             /*  virtual address*/
+	pinfo->dma_addr = dma_addr;             /*  physical address*/
+	pinfo->mem_size = memsz;
 
 	pinfo->rx_buf = mem_addr;
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
@@ -187,15 +184,23 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 }
 
 /* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
+int __init cpm_uart_init_portdesc(void)
 {
 	pr_debug("CPM uart[-]:init portdesc\n");
 
 	cpm_uart_nr = 0;
 #ifdef CONFIG_SERIAL_CPM_SMC1
 	cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
+/*
+ *  Is SMC1 being relocated?
+ */
+# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
+	cpm_uart_ports[UART_SMC1].smcup =
+	    (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
+# else
 	cpm_uart_ports[UART_SMC1].smcup =
 	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
+# endif
 	cpm_uart_ports[UART_SMC1].port.mapbase =
 	    (unsigned long)&cpmp->cp_smc[0];
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);