X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fserial%2Fmcfserial.c;h=08430961a89513885688a5197dadbfa24361d79c;hb=refs%2Fheads%2Fvserver;hp=8c40167778dea949e077954a10445736f9f6ea21;hpb=f7f1b0f1e2fbadeab12d24236000e778aa9b1ead;p=linux-2.6.git diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index 8c4016777..08430961a 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include #include @@ -58,16 +57,19 @@ struct timer_list mcfrs_timer_struct; * keep going. Perhaps one day the cflag settings for the * console can be used instead. */ -#if defined(CONFIG_ARNEWSH) || defined(CONFIG_MOTOROLA) || defined(CONFIG_senTec) || defined(CONFIG_SNEHA) +#if defined(CONFIG_HW_FEITH) +#define CONSOLE_BAUD_RATE 38400 +#define DEFAULT_CBAUD B38400 +#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || \ + defined(CONFIG_M5329EVB) || defined(CONFIG_GILBARCO) +#define CONSOLE_BAUD_RATE 115200 +#define DEFAULT_CBAUD B115200 +#elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \ + defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET) #define CONSOLE_BAUD_RATE 19200 #define DEFAULT_CBAUD B19200 #endif -#if defined(CONFIG_HW_FEITH) - #define CONSOLE_BAUD_RATE 38400 - #define DEFAULT_CBAUD B38400 -#endif - #ifndef CONSOLE_BAUD_RATE #define CONSOLE_BAUD_RATE 9600 #define DEFAULT_CBAUD B9600 @@ -91,7 +93,8 @@ static struct tty_driver *mcfrs_serial_driver; #undef SERIAL_DEBUG_OPEN #undef SERIAL_DEBUG_FLOW -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M520x) || defined(CONFIG_M532x) #define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) #else #define IRQBASE 73 @@ -107,12 +110,30 @@ static struct mcf_serial mcfrs_table[] = { .irq = IRQBASE, .flags = ASYNC_BOOT_AUTOCONF, }, +#ifdef MCFUART_BASE2 { /* ttyS1 */ .magic = 0, .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), .irq = IRQBASE+1, .flags = ASYNC_BOOT_AUTOCONF, }, +#endif +#ifdef MCFUART_BASE3 + { /* ttyS2 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE3), + .irq = IRQBASE+2, + .flags = ASYNC_BOOT_AUTOCONF, + }, +#endif +#ifdef MCFUART_BASE4 + { /* ttyS3 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE4), + .irq = IRQBASE+3, + .flags = ASYNC_BOOT_AUTOCONF, + }, +#endif }; @@ -307,7 +328,7 @@ static inline void receive_chars(struct mcf_serial *info) { volatile unsigned char *uartp; struct tty_struct *tty = info->tty; - unsigned char status, ch; + unsigned char status, ch, flag; if (!tty) return; @@ -315,10 +336,6 @@ static inline void receive_chars(struct mcf_serial *info) uartp = info->addr; while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) { - - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - break; - ch = uartp[MCFUART_URB]; info->stats.rx++; @@ -329,32 +346,26 @@ static inline void receive_chars(struct mcf_serial *info) } #endif - tty->flip.count++; + flag = TTY_NORMAL; if (status & MCFUART_USR_RXERR) { uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; if (status & MCFUART_USR_RXBREAK) { info->stats.rxbreak++; - *tty->flip.flag_buf_ptr++ = TTY_BREAK; + flag = TTY_BREAK; } else if (status & MCFUART_USR_RXPARITY) { info->stats.rxparity++; - *tty->flip.flag_buf_ptr++ = TTY_PARITY; + flag = TTY_PARITY; } else if (status & MCFUART_USR_RXOVERRUN) { info->stats.rxoverrun++; - *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; + flag = TTY_OVERRUN; } else if (status & MCFUART_USR_RXFRAMING) { info->stats.rxframing++; - *tty->flip.flag_buf_ptr++ = TTY_FRAME; - } else { - /* This should never happen... */ - *tty->flip.flag_buf_ptr++ = 0; + flag = TTY_FRAME; } - } else { - *tty->flip.flag_buf_ptr++ = 0; } - *tty->flip.char_buf_ptr++ = ch; + tty_insert_flip_char(tty, ch, flag); } - - schedule_work(&tty->flip.work); + tty_schedule_flip(tty); return; } @@ -393,7 +404,7 @@ static inline void transmit_chars(struct mcf_serial *info) /* * This is the serial driver's generic interrupt routine */ -irqreturn_t mcfrs_interrupt(int irq, void *dev_id, struct pt_regs *regs) +irqreturn_t mcfrs_interrupt(int irq, void *dev_id) { struct mcf_serial *info; unsigned char isr; @@ -1121,7 +1132,7 @@ static int mcfrs_ioctl(struct tty_struct *tty, struct file * file, return 0; } -static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios) +static void mcfrs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; @@ -1511,7 +1522,36 @@ static void mcfrs_irqinit(struct mcf_serial *info) *portp = (*portp & ~0x000000ff) | 0x00000055; portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT); *portp = (*portp & ~0x000003fc) | 0x000002a8; -#elif defined(CONFIG_M527x) || defined(CONFIG_M528x) +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) + volatile unsigned char *icrp, *uartp; + volatile unsigned long *imrp; + + uartp = info->addr; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + + MCFINTC_ICR0 + MCFINT_UART0 + info->line); + *icrp = 0x30 + info->line; /* level 6, line based priority */ + + imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + + MCFINTC_IMRL); + *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); +#if defined(CONFIG_M527x) + { + /* + * External Pin Mask Setting & Enable External Pin for Interface + * mrcbis@aliceposta.it + */ + unsigned short *serpin_enable_mask; + serpin_enable_mask = (MCF_IPSBAR + MCF_GPIO_PAR_UART); + if (info->line == 0) + *serpin_enable_mask |= UART0_ENABLE_MASK; + else if (info->line == 1) + *serpin_enable_mask |= UART1_ENABLE_MASK; + else if (info->line == 2) + *serpin_enable_mask |= UART2_ENABLE_MASK; + } +#endif +#elif defined(CONFIG_M520x) volatile unsigned char *icrp, *uartp; volatile unsigned long *imrp; @@ -1519,11 +1559,49 @@ static void mcfrs_irqinit(struct mcf_serial *info) icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + info->line); - *icrp = 0x33; /* UART0 with level 6, priority 3 */ + *icrp = 0x03; imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_IMRL); *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); + if (info->line < 2) { + unsigned short *uart_par; + uart_par = (unsigned short *)(MCF_IPSBAR + MCF_GPIO_PAR_UART); + if (info->line == 0) + *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD0 + | MCF_GPIO_PAR_UART_PAR_URXD0; + else if (info->line == 1) + *uart_par |= MCF_GPIO_PAR_UART_PAR_UTXD1 + | MCF_GPIO_PAR_UART_PAR_URXD1; + } else if (info->line == 2) { + unsigned char *feci2c_par; + feci2c_par = (unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); + *feci2c_par &= ~0x0F; + *feci2c_par |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 + | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; + } +#elif defined(CONFIG_M532x) + volatile unsigned char *uartp; + uartp = info->addr; + switch (info->line) { + case 0: + MCF_INTC0_ICR26 = 0x3; + MCF_INTC0_CIMR = 26; + /* GPIO initialization */ + MCF_GPIO_PAR_UART |= 0x000F; + break; + case 1: + MCF_INTC0_ICR27 = 0x3; + MCF_INTC0_CIMR = 27; + /* GPIO initialization */ + MCF_GPIO_PAR_UART |= 0x0FF0; + break; + case 2: + MCF_INTC0_ICR28 = 0x3; + MCF_INTC0_CIMR = 28; + /* GPIOs also must be initalized, depends on board */ + break; + } #else volatile unsigned char *icrp, *uartp; @@ -1553,7 +1631,7 @@ static void mcfrs_irqinit(struct mcf_serial *info) /* Clear mask, so no surprise interrupts. */ uartp[MCFUART_UIMR] = 0; - if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT, + if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED, "ColdFire UART", NULL)) { printk("MCFRS: Unable to attach ColdFire UART %d interrupt " "vector=%d\n", info->line, info->irq); @@ -1623,7 +1701,7 @@ static void show_serial_version(void) printk(mcfrs_drivername); } -static struct tty_operations mcfrs_ops = { +static const struct tty_operations mcfrs_ops = { .open = mcfrs_open, .close = mcfrs_close, .write = mcfrs_write, @@ -1670,8 +1748,7 @@ mcfrs_init(void) /* Initialize the tty_driver structure */ mcfrs_serial_driver->owner = THIS_MODULE; mcfrs_serial_driver->name = "ttyS"; - mcfrs_serial_driver->devfs_name = "ttys/"; - mcfrs_serial_driver->driver_name = "serial"; + mcfrs_serial_driver->driver_name = "mcfserial"; mcfrs_serial_driver->major = TTY_MAJOR; mcfrs_serial_driver->minor_start = 64; mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; @@ -1755,10 +1832,23 @@ void mcfrs_init_console(void) uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; +#ifdef CONFIG_M5272 +{ + /* + * For the MCF5272, also compute the baudrate fraction. + */ + int fraction = MCF_BUSCLK - (clk * 32 * mcfrs_console_baud); + fraction *= 16; + fraction /= (32 * mcfrs_console_baud); + uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */ + clk = (MCF_BUSCLK / mcfrs_console_baud) / 32; +} +#else clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */ +#endif + uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */ uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */ - uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;