X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fserial%2Fmcfserial.c;h=8cbbb954df2cbdf4b4d360f469f7a5408ffbfa15;hb=9464c7cf61b9433057924c36e6e02f303a00e768;hp=832abd3c4706ddabe8a3a6c07d9caf0e2b8e139f;hpb=41689045f6a3cbe0550e1d34e9cc20d2e8c432ba;p=linux-2.6.git

diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index 832abd3c4..8cbbb954d 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -60,11 +60,11 @@ struct timer_list mcfrs_timer_struct;
 #if defined(CONFIG_HW_FEITH)
 #define	CONSOLE_BAUD_RATE	38400
 #define	DEFAULT_CBAUD		B38400
-#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB) || defined(CONFIG_M5329EVB)
+#elif defined(CONFIG_MOD5272) || defined(CONFIG_M5208EVB)
 #define CONSOLE_BAUD_RATE 	115200
 #define DEFAULT_CBAUD		B115200
 #elif defined(CONFIG_ARNEWSH) || defined(CONFIG_FREESCALE) || \
-      defined(CONFIG_senTec) || defined(CONFIG_SNEHA) || defined(CONFIG_AVNET)
+      defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
 #define	CONSOLE_BAUD_RATE	19200
 #define	DEFAULT_CBAUD		B19200
 #endif
@@ -93,7 +93,7 @@ static struct tty_driver *mcfrs_serial_driver;
 #undef SERIAL_DEBUG_FLOW
 
 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x) || defined(CONFIG_M532x)
+    defined(CONFIG_M520x)
 #define	IRQBASE	(MCFINT_VECBASE+MCFINT_UART0)
 #else
 #define	IRQBASE	73
@@ -1545,28 +1545,6 @@ static void mcfrs_irqinit(struct mcf_serial *info)
 			*feci2c_par |=  MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2
 				    | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
 		}
-#elif defined(CONFIG_M532x)
-	volatile unsigned char *uartp;
-	uartp = info->addr;
-	switch (info->line) {
-	case 0:
-		MCF_INTC0_ICR26 = 0x3;
-		MCF_INTC0_CIMR = 26;
-		/* GPIO initialization */
-		MCF_GPIO_PAR_UART |= 0x000F;
-		break;
-	case 1:
-		MCF_INTC0_ICR27 = 0x3;
-		MCF_INTC0_CIMR = 27;
-		/* GPIO initialization */
-		MCF_GPIO_PAR_UART |= 0x0FF0;
-		break;
-	case 2:
-		MCF_INTC0_ICR28 = 0x3;
-		MCF_INTC0_CIMR = 28;
-		/* GPIOs also must be initalized, depends on board */
-		break;
-	}
 #else
 	volatile unsigned char	*icrp, *uartp;
 
@@ -1596,7 +1574,7 @@ static void mcfrs_irqinit(struct mcf_serial *info)
 	/* Clear mask, so no surprise interrupts. */
 	uartp[MCFUART_UIMR] = 0;
 
-	if (request_irq(info->irq, mcfrs_interrupt, IRQF_DISABLED,
+	if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT,
 	    "ColdFire UART", NULL)) {
 		printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
 			"vector=%d\n", info->line, info->irq);
@@ -1713,6 +1691,7 @@ mcfrs_init(void)
 	/* Initialize the tty_driver structure */
 	mcfrs_serial_driver->owner = THIS_MODULE;
 	mcfrs_serial_driver->name = "ttyS";
+	mcfrs_serial_driver->devfs_name = "ttys/";
 	mcfrs_serial_driver->driver_name = "serial";
 	mcfrs_serial_driver->major = TTY_MAJOR;
 	mcfrs_serial_driver->minor_start = 64;