X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fusb%2Fmisc%2FKconfig;h=a74bf8617e7f3f11cbb67397e0bd6cef9b160483;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=8c958af4a1d37581601934dc5f2186344ff0d286;hpb=9213980e6a70d8473e0ffd4b39ab5b6caaba9ff5;p=linux-2.6.git diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 8c958af4a..a74bf8617 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -32,25 +32,15 @@ config USB_EMI26 To compile this driver as a module, choose M here: the module will be called emi26. -config USB_TIGL - tristate "Texas Instruments Graph Link USB (aka SilverLink) cable support" - depends on USB - ---help--- - If you own a Texas Instruments graphing calculator and use a - TI-GRAPH LINK USB cable (aka SilverLink), then you might be - interested in this driver. - - If you enable this driver, you will be able to communicate with - your calculator through a set of device nodes under /dev. - - To compile this driver as a module, choose M here: the - module will be called tiglusb. - - If you don't know what the SilverLink cable is or what a Texas - Instruments graphing calculator is, then you probably don't need this - driver. +config USB_ADUTUX + tristate "ADU devices from Ontrak Control Systems (EXPERIMENTAL)" + depends on USB && EXPERIMENTAL + help + Say Y if you want to use an ADU device from Ontrak Control + Systems. - If unsure, say N. + To compile this driver as a module, choose M here. The module + will be called adutux. config USB_AUERSWALD tristate "USB Auerswald ISDN support (EXPERIMENTAL)" @@ -108,6 +98,20 @@ config USB_LED To compile this driver as a module, choose M here: the module will be called usbled. +config USB_CYPRESS_CY7C63 + tristate "Cypress CY7C63xxx USB driver support" + depends on USB + help + Say Y here if you want to connect a Cypress CY7C63xxx + micro controller to your computer's USB port. Currently this + driver supports the pre-programmed devices (incl. firmware) + by AK Modul-Bus Computer GmbH. + + Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html + + To compile this driver as a module, choose M here: the + module will be called cypress_cy7c63. + config USB_CYTHERM tristate "Cypress USB thermometer driver support" depends on USB @@ -121,21 +125,36 @@ config USB_CYTHERM To compile this driver as a module, choose M here: the module will be called cytherm. -config USB_SPEEDTOUCH - tristate "Alcatel Speedtouch USB support" - depends on USB && ATM - select CRC32 +config USB_PHIDGET + tristate "USB Phidgets drivers" + depends on USB + help + Say Y here to enable the various drivers for devices from + Phidgets inc. + +config USB_PHIDGETKIT + tristate "USB PhidgetInterfaceKit support" + depends on USB_PHIDGET + help + Say Y here if you want to connect a PhidgetInterfaceKit USB device + from Phidgets Inc. + + To compile this driver as a module, choose M here: the + module will be called phidgetkit. + +config USB_PHIDGETMOTORCONTROL + tristate "USB PhidgetMotorControl support" + depends on USB_PHIDGET help - Say Y here if you have an Alcatel SpeedTouch USB or SpeedTouch 330 - modem. In order to use your modem you will need to install some user - space tools, see for details. + Say Y here if you want to connect a PhidgetMotorControl USB device + from Phidgets Inc. To compile this driver as a module, choose M here: the - module will be called speedtch. + module will be called phidgetmotorcontrol. config USB_PHIDGETSERVO tristate "USB PhidgetServo support" - depends on USB + depends on USB_PHIDGET help Say Y here if you want to connect an 1 or 4 Motor PhidgetServo servo controller version 2.0 or 3.0. @@ -145,11 +164,79 @@ config USB_PHIDGETSERVO To compile this driver as a module, choose M here: the module will be called phidgetservo. +config USB_IDMOUSE + tristate "Siemens ID USB Mouse Fingerprint sensor support" + depends on USB + help + Say Y here if you want to use the fingerprint sensor on + the Siemens ID Mouse. There is also a Siemens ID Mouse + _Professional_, which has not been tested with this driver, + but uses the same sensor and may therefore work. + + This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", + which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". + + See also . + +config USB_FTDI_ELAN + tristate "Elan PCMCIA CardBus Adapter USB Client" + depends on USB + default M + help + ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. + Currently only the U132 adapter is available. + + The U132 is specifically designed for CardBus PC cards that contain + an OHCI host controller. Typical PC cards are the Orange Mobile 3G + Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work + with PC cards that do not contain an OHCI controller. To use a U132 + adapter you will need this "ftdi-elan" module as well as the "u132-hcd" + module which is a USB host controller driver that talks to the OHCI + controller within CardBus card that are inserted in the U132 adapter. + + This driver has been tested with a CardBus OHCI USB adapter, and + worked with a USB PEN Drive inserted into the first USB port of + the PCCARD. A rather pointless thing to do, but useful for testing. + + See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" + + It is safe to say M here. + +config USB_APPLEDISPLAY + tristate "Apple Cinema Display support" + depends on USB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to control the backlight of Apple Cinema + Displays over USB. This driver provides a sysfs interface. + +source "drivers/usb/misc/sisusbvga/Kconfig" + +config USB_LD + tristate "USB LD driver" + depends on USB + help + This driver is for generic USB devices that use interrupt transfers, + like LD Didactic's USB devices. + + To compile this driver as a module, choose M here: the + module will be called ldusb. + +config USB_TRANCEVIBRATOR + tristate "PlayStation 2 Trance Vibrator driver support" + depends on USB + help + Say Y here if you want to connect a PlayStation 2 Trance Vibrator + device to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called trancevibrator. + config USB_TEST tristate "USB testing driver (DEVELOPMENT)" depends on USB && USB_DEVICEFS && EXPERIMENTAL help - This driver is for testing host controller software. It is used with specialized device firmware for regression and stress testing, to help prevent problems from cropping up with "real" drivers.