X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fusb%2Fnet%2Fpegasus.h;h=98f6898cae1f48350162686f1f33894d63e0fad7;hb=refs%2Fheads%2Fvserver;hp=7bc24d93f1c39563d323201c7ecef06c4076a15a;hpb=9bf4aaab3e101692164d49b7ca357651eb691cb6;p=linux-2.6.git

diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index 7bc24d93f..98f6898ca 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -25,11 +25,9 @@
 #define	PHY_READ		0x40
 #define	PHY_WRITE		0x20
 #define	DEFAULT_GPIO_RESET	0x24
-#define	LINKSYS_GPIO_RESET	0x24
 #define	DEFAULT_GPIO_SET	0x26
 
 #define	PEGASUS_PRESENT		0x00000001
-#define	PEGASUS_RUNNING		0x00000002
 #define	PEGASUS_TX_BUSY		0x00000004
 #define	PEGASUS_RX_BUSY		0x00000008
 #define	CTRL_URB_RUNNING	0x00000010
@@ -76,6 +74,7 @@ enum pegasus_registers {
 	EthTxStat0 = 0x2b,
 	EthTxStat1 = 0x2c,
 	EthRxStat = 0x2d,
+	WakeupControl = 0x78,
 	Reg7b = 0x7b,
 	Gpio0 = 0x7e,
 	Gpio1 = 0x7f,
@@ -85,14 +84,18 @@ enum pegasus_registers {
 
 typedef struct pegasus {
 	struct usb_device	*usb;
+	struct usb_interface	*intf;
 	struct net_device	*net;
 	struct net_device_stats	stats;
 	struct mii_if_info	mii;
 	unsigned		flags;
 	unsigned		features;
+	u32			msg_enable;
+	u32			wolopts;
 	int			dev_index;
 	int			intr_interval;
 	struct tasklet_struct	rx_tl;
+	struct delayed_work	carrier_check;
 	struct urb		*ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
 	struct sk_buff		*rx_pool[RX_SKBS];
 	struct sk_buff		*rx_skb;
@@ -128,6 +131,7 @@ struct usb_eth_dev {
 #define	VENDOR_COREGA		0x07aa
 #define	VENDOR_DLINK		0x2001
 #define	VENDOR_ELCON		0x0db7
+#define	VENDOR_ELECOM		0x056e
 #define	VENDOR_ELSA		0x05cc
 #define	VENDOR_GIGABYTE		0x1044
 #define	VENDOR_HAWKING		0x0e66
@@ -136,6 +140,7 @@ struct usb_eth_dev {
 #define	VENDOR_KINGSTON		0x0951
 #define	VENDOR_LANEED		0x056e
 #define	VENDOR_LINKSYS		0x066b
+#define	VENDOR_LINKSYS2		0x077b
 #define	VENDOR_MELCO		0x0411
 #define	VENDOR_MICROSOFT	0x045e
 #define	VENDOR_MOBILITY		0x1342
@@ -177,6 +182,8 @@ PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
 		VENDOR_ADMTEK, 0x8511,
 		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
@@ -212,21 +219,23 @@ PEGASUS_DEV( "Corega FEter USB-TX", VENDOR_COREGA, 0x0004,
 PEGASUS_DEV( "Corega FEter USB-TXS", VENDOR_COREGA, 0x000d,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
-		LINKSYS_GPIO_RESET )
+		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
-		LINKSYS_GPIO_RESET )
+		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
-		LINKSYS_GPIO_RESET | PEGASUS_II )
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
-		LINKSYS_GPIO_RESET | PEGASUS_II )
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
-		LINKSYS_GPIO_RESET | PEGASUS_II )
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
 		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
 PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
 		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+		DEFAULT_GPIO_RESET  | PEGASUS_II )
 PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
@@ -245,6 +254,8 @@ PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
 		DEFAULT_GPIO_RESET)
 PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
 		DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
 PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
@@ -252,17 +263,19 @@ PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
 PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
-		LINKSYS_GPIO_RESET )
+		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
-		LINKSYS_GPIO_RESET )
+		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
-		LINKSYS_GPIO_RESET | HAS_HOME_PNA )
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
 PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
-		LINKSYS_GPIO_RESET | PEGASUS_II)
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
-		LINKSYS_GPIO_RESET | PEGASUS_II )
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
-		LINKSYS_GPIO_RESET | PEGASUS_II )	
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,