X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=2fd9ab7f40d5984e72fdac9e91f52bae1de04c30;hb=4e76c8a9fa413ccc09d3f7f664183dcce3555d57;hp=6be8fbec0a0e2e1d454bc1513df3eba8fa49d248;hpb=f7f1b0f1e2fbadeab12d24236000e778aa9b1ead;p=linux-2.6.git diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6be8fbec0..2fd9ab7f4 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -65,20 +65,27 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. -config FB_SOFT_CURSOR - tristate - depends on FB - default n - ---help--- - Include the soft_cursor function for generic software cursor support. - This is used by drivers that don't provide their own (accelerated) - version. - config FB_MACMODES tristate depends on FB default n +config FB_FIRMWARE_EDID + bool "Enable firmware EDID" + depends on FB + default y + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB @@ -114,7 +121,6 @@ config FB_CIRRUS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -133,7 +139,6 @@ config FB_PM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -152,7 +157,6 @@ config FB_ARMCLCD select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -169,7 +173,6 @@ config FB_ACORN select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -181,7 +184,9 @@ config FB_CLPS711X select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR + help + Say Y to enable the Framebuffer driver for the CLPS7111 and + EP7212 processors. config FB_SA1100 bool "SA-1100 LCD support" @@ -189,7 +194,6 @@ config FB_SA1100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is a framebuffer device for the SA-1100 LCD Controller. See for information on framebuffer @@ -204,7 +208,6 @@ config FB_IMX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" @@ -212,7 +215,6 @@ config FB_CYBER2000 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -225,7 +227,6 @@ config FB_APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_Q40 bool @@ -234,12 +235,10 @@ config FB_Q40 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA - select FB_SOFT_CURSOR help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. @@ -279,7 +278,6 @@ config FB_CYBER select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -294,7 +292,6 @@ config FB_VIRGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -317,11 +314,25 @@ config FB_FM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). +config FB_ARC + tristate "Arc Monochrome LCD board support" + depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This enables support for the Arc Monochrome LCD board. The board + is based on the KS-108 lcd controller and is typically a matrix + of 2*n chips. This driver was tested with a 128x64 panel. This + driver supports it for use with x86 SBCs through a 16 bit GPIO + interface (8 bit data, 8 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI && BROKEN @@ -335,7 +346,6 @@ config FB_OF select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics @@ -347,7 +357,6 @@ config FB_CONTROL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the @@ -359,7 +368,6 @@ config FB_PLATINUM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics @@ -371,7 +379,6 @@ config FB_VALKYRIE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics @@ -383,42 +390,34 @@ config FB_CT65550 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. config FB_ASILIANT - bool "Chips 69000 display support" + bool "Asiliant (Chips) 69000 display support" depends on (FB = y) && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR + help + This is the frame buffer device driver for the Asiliant 69030 chipset config FB_IMSTT bool "IMS Twin Turbo display support" depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. -config FB_S3TRIO - bool "S3 Trio display support" - depends on (FB = y) && PPC && BROKEN - help - If you have a S3 Trio say Y. Say N for S3 Virge. - config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -432,7 +431,6 @@ config FB_STI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -453,7 +451,6 @@ config FB_MAC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES # bool ' Apple DAFB display support' CONFIG_FB_DAFB @@ -462,7 +459,6 @@ config FB_HP300 depends on (FB = y) && HP300 select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y config FB_TGA @@ -471,18 +467,16 @@ config FB_TGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" - depends on (FB = y) && (X86 || X86_64) + depends on (FB = y) && X86 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -500,7 +494,6 @@ config FB_HGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a Hercules mono graphics card. @@ -520,7 +513,7 @@ config FB_HGA_ACCEL config VIDEO_SELECT bool - depends on (FB = y) && X86 + depends on (FB = y) && X86 && !XEN default y config FB_SGIVW @@ -529,7 +522,6 @@ config FB_SGIVW select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help SGI Visual Workstation support for framebuffer graphics. @@ -539,7 +531,6 @@ config FB_GBE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -547,45 +538,44 @@ config FB_GBE config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE - default 8 + default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config BUS_I2C - bool - depends on (FB = y) && VISWS - default y - config FB_SUN3 bool "Sun3 framebuffer support" depends on (FB = y) && (SUN3 || SUN3X) && BROKEN +config FB_SBUS + bool "SBUS and UPA framebuffers" + depends on (FB = y) && SPARC + help + Say Y if you want support for SBUS or UPA based frame buffer device. + config FB_BW2 bool "BWtwo support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the BWtwo frame buffer. config FB_CG3 bool "CGthree support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGthree frame buffer. config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -596,7 +586,6 @@ config FB_PVR2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -618,13 +607,23 @@ config FB_EPSON1355 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a framebuffer. Product specs at . +config FB_S1D13XXX + tristate "Epson S1D13XXX framebuffer support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Support for S1D13XXX framebuffer device family (currently only + working with S1D13806). Product specs at + + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI @@ -634,7 +633,6 @@ config FB_NVIDIA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -646,7 +644,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" - depends on FB_NVIDIA && !PPC_OF + depends on FB_NVIDIA help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -665,7 +663,6 @@ config FB_RIVA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -697,14 +694,13 @@ config FB_RIVA_DEBUG config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -738,16 +734,22 @@ config FB_I810_GTF If unsure, say N. +config FB_I810_I2C + bool "Enable DDC Support" + depends on FB_I810 && FB_I810_GTF + select I2C + select I2C_ALGOBIT + help + config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports the on-board graphics built in to the Intel 830M/845G/852GM/855GM/865G chipsets. @@ -770,7 +772,6 @@ config FB_MATROX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC ---help--- @@ -905,21 +906,6 @@ config FB_MATROX_MULTIHEAD There is no need for enabling 'Matrox multihead support' if you have only one Matrox card in the box. -config FB_RADEON_OLD - tristate "ATI Radeon display support (Old driver)" - depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - select FB_MACMODES if PPC - help - Choose this option if you want to use an ATI Radeon graphics card as - a framebuffer device. There are both PCI and AGP versions. You - don't need to choose this to run the Radeon in plain VGA mode. - There is a product page at - . - config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI @@ -929,7 +915,6 @@ config FB_RADEON select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_OF help Choose this option if you want to use an ATI Radeon graphics card as @@ -944,8 +929,7 @@ config FB_RADEON can be build either as modules or built-in. There is a product page at - . - + http://apps.ati.com/ATIcompare/ config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON @@ -968,7 +952,6 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -980,11 +963,10 @@ config FB_ATY128 config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI - depends on FB + depends on FB && !SPARC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1010,12 +992,6 @@ config FB_ATY_GENERIC_LCD Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, Rage XC, or Rage XL chipset. -config FB_ATY_XL_INIT - bool "Rage XL No-BIOS Init support" - depends on FB_ATY_CT - help - Say Y here to support booting a Rage XL without BIOS support. - config FB_ATY_GX bool "Mach64 GX support" if PCI depends on FB_ATY @@ -1027,6 +1003,12 @@ config FB_ATY_GX is at . +config FB_S3TRIO + bool "S3 Trio display support" + depends on (FB = y) && PPC && BROKEN + help + If you have a S3 Trio say Y. Say N for S3 Virge. + config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL @@ -1036,7 +1018,6 @@ config FB_SAVAGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1068,15 +1049,15 @@ config FB_SAVAGE_ACCEL choose N here. config FB_SIS - tristate "SiS acceleration" + tristate "SiS/XGI display support" depends on FB && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help - This is the frame buffer device driver for the SiS 300, 315 and - 330 series VGA chipsets. Specs available at + This is the frame buffer device driver for the SiS 300, 315, 330 + and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. + Specs available at and . To compile this driver as a module, choose M here; the module will be called sisfb. @@ -1088,11 +1069,12 @@ config FB_SIS_300 Say Y here to support use of the SiS 300/305, 540, 630 and 730. config FB_SIS_315 - bool "SiS 315/330 series support" + bool "SiS 315/330/340 series and XGI support" depends on FB_SIS help - Say Y here to support use of the SiS 315 and 330 series - (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760). + Say Y here to support use of the SiS 315, 330 and 340 series + (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well + as XGI V3XT, V5, V8 and Z7. config FB_NEOMAGIC tristate "NeoMagic display support" @@ -1101,7 +1083,6 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1115,7 +1096,6 @@ config FB_KYRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1129,7 +1109,6 @@ config FB_3DFX select FB_CFB_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA - select FB_SOFT_CURSOR help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -1151,7 +1130,6 @@ config FB_VOODOO1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1164,21 +1142,49 @@ config FB_VOODOO1 Please read the for supported options and other important info support. +config FB_CYBLA + tristate "Cyberblade/i1 support" + depends on FB && PCI && X86_32 && !64BIT + select FB_CFB_IMAGEBLIT + select VIDEO_SELECT + ---help--- + This driver is supposed to support the Trident Cyberblade/i1 + graphics core integrated in the VIA VT8601A North Bridge, + also known as VIA Apollo PLE133. + + Status: + - Developed, tested and working on EPIA 5000 and EPIA 800. + - Does work reliable on all systems with CRT/LCD connected to + normal VGA ports. + - Should work on systems that do use the internal LCD port, but + this is absolutely not tested. + + Character imageblit, copyarea and rectangle fill are hw accelerated, + ypan scrolling is used by default. + + Please do read . + + To compile this driver as a module, choose M here: the + module will be called cyblafb. + config FB_TRIDENT tristate "Trident support" depends on FB && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops but also on some motherboards. For more information, read + Cyberblade/i1 support will be removed soon, use the cyblafb driver + instead. + Say Y if you have such a graphics board. + To compile this driver as a module, choose M here: the module will be called tridentfb. @@ -1189,7 +1195,6 @@ config FB_TRIDENT_ACCEL This will compile the Trident frame buffer device with acceleration functions. - config FB_PM3 tristate "Permedia3 support" depends on FB && PCI && BROKEN @@ -1199,56 +1204,28 @@ config FB_PM3 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 and maybe other boards. -config FB_E1356 - tristate "Epson SED1356 framebuffer support" - depends on FB && EXPERIMENTAL && PCI && MIPS - -config PB1000_CRT - bool "Use CRT on Pb1000 (J65)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1000_NTSC - bool "Use Compsite NTSC on Pb1000 (J63)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1000_TFT - bool "Use TFT Panel on Pb1000 (J64)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1500_CRT - bool "Use CRT on Pb1500 " if MIPS_PB1500=y - depends on FB_E1356 - -config PB1500_CRT - prompt "Use CRT on Pb1100 " - depends on FB_E1356 && MIPS_PB1100=y - -config PB1500_TFT - bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y - depends on FB_E1356 - -config PB1500_TFT - prompt "Use TFT Panel on Pb1100 " - depends on FB_E1356 && MIPS_PB1100=y - config FB_AU1100 bool "Au1100 LCD Driver" depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y -source "drivers/video/geode/Kconfig" - -config FB_SBUS - bool "SBUS and UPA framebuffers" - depends on (FB = y) && (SPARC32 || SPARC64) +config FB_AU1200 + bool "Au1200 LCD Driver" + depends on FB && MIPS && SOC_AU1200 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - Say Y if you want support for SBUS or UPA based frame buffer device. + This is the framebuffer driver for the AMD Au1200 SOC. It can drive + various panels and CRTs by passing in kernel cmd line option + au1200fb:panel=. + +source "drivers/video/geode/Kconfig" config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -1259,7 +1236,6 @@ config FB_TCX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -1270,7 +1246,6 @@ config FB_CG14 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -1281,7 +1256,6 @@ config FB_P9100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -1292,14 +1266,13 @@ config FB_LEO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. config FB_PCI bool "PCI framebuffers" - depends on (FB = y) && PCI && (SPARC64 || SPARC32) + depends on (FB = y) && PCI && SPARC config FB_IGA bool "IGA 168x display support" @@ -1307,7 +1280,6 @@ config FB_IGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1318,40 +1290,36 @@ config FB_HIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. config FB_PMAG_AA bool "PMAG-AA TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) used mainly in the MIPS-based DECstation series. config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) used mainly in the MIPS-based DECstation series. config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAGB-B TURBOchannel framebuffer card used mainly in the MIPS-based DECstation series. The card is currently only @@ -1359,11 +1327,10 @@ config FB_PMAGB_B config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && MACH_DECSTATION select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the onboard framebuffer (1024x768x8) in the Personal DECstation series (Personal DECstation 5000/20, /25, /33, /50, @@ -1375,7 +1342,6 @@ config FB_TX3912 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see . @@ -1383,12 +1349,11 @@ config FB_TX3912 Say Y here to enable kernel support for the on-board framebuffer. config FB_G364 - bool - depends on MIPS_MAGNUM_4000 || OLIVETTI_M700 + bool "G364 frame buffer support" + depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The G364 driver is the framebuffer used in MIPS Magnum 4000 and Olivetti M700-10 systems. @@ -1399,7 +1364,6 @@ config FB_68328 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1410,31 +1374,13 @@ config FB_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, - say M here and read . - - If unsure, say N. - -config FB_W100 - tristate "W100 frame buffer support" - depends on FB && PXA_SHARPSL - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - ---help--- - Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, + module will be called pxafb. If you want to compile it as a module, say M here and read . If unsure, say N. @@ -1456,17 +1402,44 @@ config FB_PXA_PARAMETERS describes the available parameters. -config FB_S1D13XXX - tristate "Epson S1D13XXX framebuffer support" - depends on FB +config FB_W100 + tristate "W100 frame buffer support" + depends on FB && PXA_SHARPSL + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called w100fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. + +config FB_S3C2410 + tristate "S3C2410 LCD framebuffer support" + depends on FB && ARCH_S3C2410 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR + ---help--- + Frame buffer driver for the built-in LCD controller in the Samsung + S3C2410 processor. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called s3c2410fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. +config FB_S3C2410_DEBUG + bool "S3C2410 lcd debug messages" + depends on FB_S3C2410 help - Support for S1D13XXX framebuffer device family (currently only - working with S1D13806). Product specs at - + Turn on debugging messages. Note that you can set/unset at run time + through sysfs config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" @@ -1474,7 +1447,6 @@ config FB_VIRTUAL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics