X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=4e83f01e894efe30b9cca2da83b6ff35b007e61b;hb=refs%2Fremotes%2Fvserver;hp=ab23abe01649ac947ee9e4eb5e8fc8af25a10483;hpb=c7b5ebbddf7bcd3651947760f423e3783bbe6573;p=linux-2.6.git diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index ab23abe01..4e83f01e8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -4,8 +4,23 @@ menu "Graphics support" +config FIRMWARE_EDID + bool "Enable firmware EDID" + default y + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + config FB - bool "Support for frame buffer devices" + tristate "Support for frame buffer devices" ---help--- The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and @@ -38,10 +53,54 @@ config FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FB_DDC + tristate + depends on FB && I2C && I2C_ALGOBIT + default n + +config FB_CFB_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the cfb_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version. + +config FB_CFB_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the cfb_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version. + +config FB_CFB_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the cfb_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version. + +config FB_MACMODES + tristate + depends on FB + default n + +config FB_BACKLIGHT + bool + depends on FB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + default n + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB - default y + default n ---help--- This enables functions for handling video modes using the Generalized Timing Formula and the EDID parser. A few drivers rely @@ -49,9 +108,30 @@ config FB_MODE_HELPERS your driver does not take advantage of this feature, choosing Y will just increase the kernel size by about 5K. +config FB_TILEBLITTING + bool "Enable Tile Blitting Support" + depends on FB + default n + ---help--- + This enables tile blitting. Tile blitting is a drawing technique + where the screen is divided into rectangular sections (tiles), whereas + the standard blitting divides the screen into pixels. Because the + default drawing element is a tile, drawing functions will be passed + parameters in terms of number of tiles instead of number of pixels. + For example, to draw a single character, instead of using bitmaps, + an index to an array of bitmaps will be used. To clear or move a + rectangular section of a screen, the rectangle will be described in + terms of number of tiles in the x- and y-axis. + + This is particularly important to one driver, matroxfb. If + unsure, say N. + config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -67,6 +147,9 @@ config FB_CIRRUS config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -82,6 +165,9 @@ config FB_PM2_FIFO_DISCONNECT config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on FB && ARM && ARM_AMBA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -92,9 +178,75 @@ config FB_ARMCLCD here and read . The module will be called amba-clcd. +choice + + depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) + prompt "LCD Panel" + default FB_ARMCLCD_SHARP_LQ035Q7DB02 + +config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT + bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" + help + This is an implementation of the Sharp LQ035Q7DB02, a 3.5" + color QVGA, HRTFT panel. The LogicPD device includes + an integrated HRTFT controller IC. + The native resolution is 240x320. + +config FB_ARMCLCD_SHARP_LQ057Q3DC02 + bool "LogicPD LCD 5.7\" QVGA" + help + This is an implementation of the Sharp LQ057Q3DC02, a 5.7" + color QVGA, TFT panel. The LogicPD device includes an + The native resolution is 320x240. + +config FB_ARMCLCD_SHARP_LQ64D343 + bool "LogicPD LCD 6.4\" VGA" + help + This is an implementation of the Sharp LQ64D343, a 6.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + +config FB_ARMCLCD_SHARP_LQ10D368 + bool "LogicPD LCD 10.4\" VGA" + help + This is an implementation of the Sharp LQ10D368, a 10.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + + +config FB_ARMCLCD_SHARP_LQ121S1DG41 + bool "LogicPD LCD 12.1\" SVGA" + help + This is an implementation of the Sharp LQ121S1DG41, a 12.1" + color SVGA, TFT panel. The LogicPD device includes an + The native resolution is 800x600. + + This panel requires a clock rate may be an integer fraction + of the base LCDCLK frequency. The driver will select the + highest frequency available that is lower than the maximum + allowed. The panel may flicker if the clock rate is + slower than the recommended minimum. + +config FB_ARMCLCD_AUO_A070VW01_WIDE + bool "AU Optronics A070VW01 LCD 7.0\" WIDE" + help + This is an implementation of the AU Optronics, a 7.0" + WIDE Color. The native resolution is 234x480. + +config FB_ARMCLCD_HITACHI + bool "Hitachi Wide Screen 800x480" + help + This is an implementation of the Hitachi 800x480. + +endchoice + + config FB_ACORN bool "Acorn VIDC support" - depends on FB && ARM && ARCH_ACORN + depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -102,11 +254,20 @@ config FB_ACORN config FB_CLPS711X bool "CLPS711X LCD support" - depends on FB && ARM && ARCH_CLPS711X + depends on (FB = y) && ARM && ARCH_CLPS711X + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Say Y to enable the Framebuffer driver for the CLPS7111 and + EP7212 processors. config FB_SA1100 bool "SA-1100 LCD support" - depends on FB && ARM && ARCH_SA1100 + depends on (FB = y) && ARM && ARCH_SA1100 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is a framebuffer device for the SA-1100 LCD Controller. See for information on framebuffer @@ -115,9 +276,19 @@ config FB_SA1100 If you plan to use the LCD display with your SA-1100 system, say Y here. +config FB_IMX + tristate "Motorola i.MX LCD support" + depends on FB && ARM && ARCH_IMX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -126,13 +297,18 @@ config FB_CYBER2000 config FB_APOLLO bool - depends on FB && APOLLO + depends on (FB = y) && APOLLO default y + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT config FB_Q40 bool - depends on FB && Q40 + depends on (FB = y) && Q40 default y + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT config FB_AMIGA tristate "Amiga native chipset support" @@ -173,6 +349,9 @@ config FB_AMIGA_AGA config FB_CYBER tristate "Amiga CyberVision 64 support" depends on FB && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -183,7 +362,10 @@ config FB_CYBER config FB_VIRGE bool "Amiga CyberVision 64/3D support " - depends on FB && ZORRO && BROKEN + depends on (FB = y) && ZORRO && BROKEN + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -194,7 +376,7 @@ config FB_VIRGE config FB_RETINAZ3 tristate "Amiga Retina Z3 support" - depends on FB && ZORRO && BROKEN + depends on (FB = y) && ZORRO && BROKEN help This enables support for the Retina Z3 graphics card. Say N unless you have a Retina Z3 or plan to get one before you next recompile @@ -202,73 +384,114 @@ config FB_RETINAZ3 config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" - depends on FB && ZORRO + depends on (FB = y) && ZORRO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). +config FB_ARC + tristate "Arc Monochrome LCD board support" + depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This enables support for the Arc Monochrome LCD board. The board + is based on the KS-108 lcd controller and is typically a matrix + of 2*n chips. This driver was tested with a 128x64 panel. This + driver supports it for use with x86 SBCs through a 16 bit GPIO + interface (8 bit data, 8 bit control). If you anticipate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_ATARI bool "Atari native chipset support" - depends on FB && ATARI && BROKEN + depends on (FB = y) && ATARI && BROKEN help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF bool "Open Firmware frame buffer device support" - depends on FB && (PPC64 || PPC_OF) + depends on (FB = y) && (PPC64 || PPC_OF) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics board. config FB_CONTROL bool "Apple \"control\" display support" - depends on FB && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. config FB_PLATINUM bool "Apple \"platinum\" display support" - depends on FB && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. config FB_VALKYRIE bool "Apple \"valkyrie\" display support" - depends on FB && (MAC || PPC_PMAC) + depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics adapter in some Power Macintoshes. config FB_CT65550 bool "Chips 65550 display support" - depends on FB && PPC + depends on (FB = y) && PPC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. config FB_ASILIANT - bool "Chips 69000 display support" - depends on FB && PCI + bool "Asiliant (Chips) 69000 display support" + depends on (FB = y) && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Asiliant 69030 chipset config FB_IMSTT bool "IMS Twin Turbo display support" - depends on FB && PCI + depends on (FB = y) && PCI + select FB_CFB_IMAGEBLIT + select FB_MACMODES if PPC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. -config FB_S3TRIO - bool "S3 Trio display support" - depends on FB && PPC && BROKEN - help - If you have a S3 Trio say Y. Say N for S3 Virge. - config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -279,6 +502,9 @@ config FB_VGA16 config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -295,38 +521,59 @@ config FB_STI config FB_MAC bool "Generic Macintosh display support" - depends on FB && MAC + depends on (FB = y) && MAC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES # bool ' Apple DAFB display support' CONFIG_FB_DAFB config FB_HP300 bool - depends on FB && HP300 + depends on (FB = y) && HP300 + select FB_CFB_FILLRECT + select FB_CFB_IMAGEBLIT default y config FB_TGA tristate "TGA framebuffer support" depends on FB && ALPHA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select BITREVERSE help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" - depends on FB && (X86 || X86_64) + depends on (FB = y) && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select VIDEO_SELECT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please read . If unsure, say Y. -config VIDEO_SELECT - bool - depends on FB_VESA - default y +config FB_IMAC + bool "Intel-based Macintosh Framebuffer Support" + depends on (FB = y) && X86 && EFI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Intel-based Macintosh config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a Hercules mono graphics card. @@ -343,21 +590,21 @@ config FB_HGA_ACCEL This will compile the Hercules mono graphics with acceleration functions. - -config VIDEO_SELECT - bool - depends on FB && X86 - default y - config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help SGI Visual Workstation support for framebuffer graphics. config FB_GBE bool "SGI Graphics Backend frame buffer support" - depends on FB && (SGI_IP32 || X86_VISWS) + depends on (FB = y) && (SGI_IP32 || X86_VISWS) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -365,35 +612,44 @@ config FB_GBE config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE - default 8 + default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config BUS_I2C - bool - depends on FB && VISWS - default y - config FB_SUN3 bool "Sun3 framebuffer support" - depends on FB && (SUN3 || SUN3X) && BROKEN + depends on (FB = y) && (SUN3 || SUN3X) && BROKEN + +config FB_SBUS + bool "SBUS and UPA framebuffers" + depends on (FB = y) && SPARC + help + Say Y if you want support for SBUS or UPA based frame buffer device. config FB_BW2 bool "BWtwo support" - depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the BWtwo frame buffer. config FB_CG3 bool "CGthree support" - depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGthree frame buffer. config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on FB && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -401,6 +657,9 @@ config FB_CG6 config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -418,19 +677,77 @@ config FB_PVR2 config FB_EPSON1355 bool "Epson 1355 framebuffer support" - depends on FB && (SUPERH || ARCH_CEIVA) + depends on (FB = y) && (SUPERH || ARCH_CEIVA) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a framebuffer. Product specs at . +config FB_S1D13XXX + tristate "Epson S1D13XXX framebuffer support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Support for S1D13XXX framebuffer device family (currently only + working with S1D13806). Product specs at + + +config FB_NVIDIA + tristate "nVidia Framebuffer Support" + depends on FB && PCI + select I2C_ALGOBIT if FB_NVIDIA_I2C + select I2C if FB_NVIDIA_I2C + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select BITREVERSE + help + This driver supports graphics boards with the nVidia chips, TNT + and newer. For very old chipsets, such as the RIVA128, then use + the rivafb. + Say Y if you have such a graphics board. + + To compile this driver as a module, choose M here: the + module will be called nvidiafb. + +config FB_NVIDIA_I2C + bool "Enable DDC Support" + depends on FB_NVIDIA + help + This enables I2C support for nVidia Chipsets. This is used + only for getting EDID information from the attached display + allowing for robust video mode handling and switching. + + Because fbdev-2.6 requires that drivers must be able to + independently validate video mode parameters, you should say Y + here. + +config FB_NVIDIA_BACKLIGHT + bool "Support for backlight control" + depends on FB_NVIDIA && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RIVA tristate "nVidia Riva support" depends on FB && PCI select I2C_ALGOBIT if FB_RIVA_I2C select I2C if FB_RIVA_I2C + select FB_DDC if FB_RIVA_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select BITREVERSE help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -457,15 +774,26 @@ config FB_RIVA_DEBUG default n help Say Y here if you want the Riva driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. +config FB_RIVA_BACKLIGHT + bool "Support for backlight control" + depends on FB_RIVA && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -499,9 +827,65 @@ config FB_I810_GTF If unsure, say N. +config FB_I810_I2C + bool "Enable DDC Support" + depends on FB_I810 && FB_I810_GTF + select I2C + select I2C_ALGOBIT + select FB_DDC + help + +config FB_INTEL + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" + depends on FB && EXPERIMENTAL && PCI && X86 + select AGP + select AGP_INTEL + select I2C_ALGOBIT if FB_INTEL_I2C + select I2C if FB_INTEL_I2C + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This driver supports the on-board graphics built in to the Intel + 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. + Say Y if you have and plan to use such a board. + + If you say Y here and want DDC/I2C support you must first say Y to + "I2C support" and "I2C bit-banging support" in the character devices + section. + + If you say M here then "I2C support" and "I2C bit-banging support" + can be build either as modules or built-in. + + To compile this driver as a module, choose M here: the + module will be called intelfb. + + For more information, please read + +config FB_INTEL_DEBUG + bool "Intel driver Debug Messages" + depends on FB_INTEL + ---help--- + Say Y here if you want the Intel driver to output all sorts + of debugging information to provide to the maintainer when + something goes wrong. + +config FB_INTEL_I2C + bool "DDC/I2C for Intel framebuffer support" + depends on FB_INTEL + default y + help + Say Y here if you want DDC/I2C support for your on-board Intel graphics. + config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_MACMODES if PPC_PMAC ---help--- Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox @@ -535,7 +919,7 @@ config FB_MATROX_MYSTIQUE packed pixel and 32 bpp packed pixel. You can also use font widths different from 8. -config FB_MATROX_G450 +config FB_MATROX_G bool "G100/G200/G400/G450/G550 support" depends on FB_MATROX ---help--- @@ -546,10 +930,10 @@ config FB_MATROX_G450 different from 8. If you need support for G400 secondary head, you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section, and then to "Matrox I2C support" and "G400 second head - support" here in the framebuffer section. G450/G550 secondary head - and digital output are supported without additional modules. + "I2C support" in the character devices section, and then to + "Matrox I2C support" and "G400 second head support" here in the + framebuffer section. G450/G550 secondary head and digital output + are supported without additional modules. The driver starts in monitor mode. You must use the matroxset tool (available at ) to @@ -566,26 +950,6 @@ config FB_MATROX_G450 G450/G550 hardware can display TV picture only from secondary CRTC, and it performs no scaling, so picture must have 525 or 625 lines. -config FB_MATROX_G100A - bool "G100/G200/G400 support" - depends on FB_MATROX && !FB_MATROX_G450 - ---help--- - Say Y here if you have a Matrox G100, G200 or G400 based - video card. If you select "Advanced lowlevel driver options", you - should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed - pixel and 32 bpp packed pixel. You can also use font widths - different from 8. - - If you need support for G400 secondary head, you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section, and then to "Matrox I2C support" and "G400 second head - support" here in the framebuffer section. - -config FB_MATROX_G100 - bool - depends on FB_MATROX && (FB_MATROX_G450 || FB_MATROX_G100A) - default y - config FB_MATROX_I2C tristate "Matrox I2C support" depends on FB_MATROX && I2C @@ -605,7 +969,7 @@ config FB_MATROX_I2C config FB_MATROX_MAVEN tristate "G400 second head support" - depends on FB_MATROX_G100 && FB_MATROX_I2C + depends on FB_MATROX_G && FB_MATROX_I2C ---help--- WARNING !!! This support does not work with G450 !!! @@ -654,22 +1018,17 @@ config FB_MATROX_MULTIHEAD There is no need for enabling 'Matrox multihead support' if you have only one Matrox card in the box. -config FB_RADEON_OLD - tristate "ATI Radeon display support (Old driver)" - depends on FB && PCI - help - Choose this option if you want to use an ATI Radeon graphics card as - a framebuffer device. There are both PCI and AGP versions. You - don't need to choose this to run the Radeon in plain VGA mode. - There is a product page at - . - config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI select I2C_ALGOBIT if FB_RADEON_I2C select I2C if FB_RADEON_I2C + select FB_DDC if FB_RADEON_I2C select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES if PPC_OF help Choose this option if you want to use an ATI Radeon graphics card as a framebuffer device. There are both PCI and AGP versions. You @@ -683,7 +1042,7 @@ config FB_RADEON can be build either as modules or built-in. There is a product page at - . + http://apps.ati.com/ATIcompare/ config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" @@ -692,18 +1051,30 @@ config FB_RADEON_I2C help Say Y here if you want DDC/I2C support for your Radeon board. +config FB_RADEON_BACKLIGHT + bool "Support for backlight control" + depends on FB_RADEON && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RADEON_DEBUG bool "Lots of debug output from Radeon driver" depends on FB_RADEON default n help Say Y here if you want the Radeon driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. config FB_ATY128 tristate "ATI Rage128 display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. Say Y if you have such a graphics board and read @@ -712,9 +1083,21 @@ config FB_ATY128 To compile this driver as a module, choose M here: the module will be called aty128fb. +config FB_ATY128_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY128 && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI - depends on FB + depends on FB && !SPARC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. Say Y if you have such a graphics board. @@ -732,6 +1115,13 @@ config FB_ATY_CT framebuffer device. The ATI product support page for these boards is at . +config FB_ATY_GENERIC_LCD + bool "Mach64 generic LCD support (EXPERIMENTAL)" + depends on FB_ATY_CT + help + Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, + Rage XC, or Rage XL chipset. + config FB_ATY_GX bool "Mach64 GX support" if PCI depends on FB_ATY @@ -743,18 +1133,70 @@ config FB_ATY_GX is at . -config FB_ATY_XL_INIT - bool " Rage XL No-BIOS Init support" if FB_ATY_CT - depends on FB_ATY +config FB_ATY_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y help - Say Y here to support booting a Rage XL without BIOS support. + Say Y here if you want to control the backlight of your display. + +config FB_S3TRIO + bool "S3 Trio display support" + depends on (FB = y) && PPC && BROKEN + help + If you have a S3 Trio say Y. Say N for S3 Virge. + +config FB_SAVAGE + tristate "S3 Savage support" + depends on FB && PCI && EXPERIMENTAL + select I2C_ALGOBIT if FB_SAVAGE_I2C + select I2C if FB_SAVAGE_I2C + select FB_DDC if FB_SAVAGE_I2C + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This driver supports notebooks and computers with S3 Savage PCI/AGP + chips. + + Say Y if you have such a graphics card. + + To compile this driver as a module, choose M here; the module + will be called savagefb. + +config FB_SAVAGE_I2C + bool "Enable DDC2 Support" + depends on FB_SAVAGE + help + This enables I2C support for S3 Savage Chipsets. This is used + only for getting EDID information from the attached display + allowing for robust video mode handling and switching. + + Because fbdev-2.6 requires that drivers must be able to + independently validate video mode parameters, you should say Y + here. + +config FB_SAVAGE_ACCEL + bool "Enable Console Acceleration" + depends on FB_SAVAGE + default n + help + This option will compile in console acceleration support. If + the resulting framebuffer console has bothersome glitches, then + choose N here. config FB_SIS - tristate "SiS acceleration" + tristate "SiS/XGI display support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the SiS 300, 315 and - 330 series VGA chipsets. Specs available at http://www.sis.com + This is the frame buffer device driver for the SiS 300, 315, 330 + and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. + Specs available at and . To compile this driver as a module, choose M here; the module will be called sisfb. @@ -766,16 +1208,20 @@ config FB_SIS_300 Say Y here to support use of the SiS 300/305, 540, 630 and 730. config FB_SIS_315 - bool "SiS 315/330 series support" + bool "SiS 315/330/340 series and XGI support" depends on FB_SIS help - Say Y here to support use of the SiS 315 and 330 series - (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760). + Say Y here to support use of the SiS 315, 330 and 340 series + (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well + as XGI V3XT, V5, V8 and Z7. config FB_NEOMAGIC tristate "NeoMagic display support" depends on FB && PCI select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -786,6 +1232,9 @@ config FB_NEOMAGIC config FB_KYRO tristate "IMG Kyro support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -796,6 +1245,9 @@ config FB_KYRO config FB_3DFX tristate "3Dfx Banshee/Voodoo3 display support" depends on FB && PCI + select FB_CFB_IMAGEBLIT + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -814,6 +1266,9 @@ config FB_3DFX_ACCEL config FB_VOODOO1 tristate "3Dfx Voodoo Graphics (sst1) support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -823,20 +1278,52 @@ config FB_VOODOO1 WARNING: Do not use any application that uses the 3D engine (namely glide) while using this driver. - Please read the file Documentation/fb/README-sstfb.txt for supported + Please read the for supported options and other important info support. +config FB_CYBLA + tristate "Cyberblade/i1 support" + depends on FB && PCI && X86_32 && !64BIT + select FB_CFB_IMAGEBLIT + select VIDEO_SELECT + ---help--- + This driver is supposed to support the Trident Cyberblade/i1 + graphics core integrated in the VIA VT8601A North Bridge, + also known as VIA Apollo PLE133. + + Status: + - Developed, tested and working on EPIA 5000 and EPIA 800. + - Does work reliable on all systems with CRT/LCD connected to + normal VGA ports. + - Should work on systems that do use the internal LCD port, but + this is absolutely not tested. + + Character imageblit, copyarea and rectangle fill are hw accelerated, + ypan scrolling is used by default. + + Please do read . + + To compile this driver as a module, choose M here: the + module will be called cyblafb. + config FB_TRIDENT tristate "Trident support" depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops but also on some motherboards. For more information, read + Cyberblade/i1 support will be removed soon, use the cyblafb driver + instead. + Say Y if you have such a graphics board. + To compile this driver as a module, choose M here: the module will be called tridentfb. @@ -847,7 +1334,6 @@ config FB_TRIDENT_ACCEL This will compile the Trident frame buffer device with acceleration functions. - config FB_PM3 tristate "Permedia3 support" depends on FB && PCI && BROKEN @@ -857,15 +1343,28 @@ config FB_PM3 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 and maybe other boards. -config FB_SBUS - bool "SBUS and UPA framebuffers" - depends on FB && (SPARC32 || SPARC64) +config FB_AU1100 + bool "Au1100 LCD Driver" + depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y + +config FB_AU1200 + bool "Au1200 LCD Driver" + depends on FB && MIPS && SOC_AU1200 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - Say Y if you want support for SBUS or UPA based frame buffer device. + This is the framebuffer driver for the AMD Au1200 SOC. It can drive + various panels and CRTs by passing in kernel cmd line option + au1200fb:panel=. + +source "drivers/video/geode/Kconfig" config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -873,6 +1372,9 @@ config FB_FFB config FB_TCX bool "TCX (SS4/SS5 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -880,6 +1382,9 @@ config FB_TCX config FB_CG14 bool "CGfourteen (SX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -887,6 +1392,9 @@ config FB_CG14 config FB_P9100 bool "P9100 (Sparcbook 3 only) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -894,17 +1402,23 @@ config FB_P9100 config FB_LEO bool "Leo (ZX) support" depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. config FB_PCI bool "PCI framebuffers" - depends on FB && PCI && (SPARC64 || SPARC32) + depends on (FB = y) && PCI && SPARC config FB_IGA bool "IGA 168x display support" depends on SPARC32 && FB_PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -912,46 +1426,83 @@ config FB_IGA config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. +config FB_PMAG_AA + bool "PMAG-AA TURBOchannel framebuffer support" + depends on (FB = y) && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) + used mainly in the MIPS-based DECstation series. + config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" - depends on FB && DECSTATION && TC + depends on (FB = y) && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - Say Y here to directly support the on-board PMAG-BA framebuffer in - the 5000/1xx versions of the DECstation. There is a page dedicated - to Linux on DECstations at . + Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) + used mainly in the MIPS-based DECstation series. config FB_PMAGB_B - bool "PMAGB-B TURBOchannel framebuffer spport" - depends on FB && DECSTATION && TC + bool "PMAGB-B TURBOchannel framebuffer support" + depends on (FB = y) && TC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - Say Y here to directly support the on-board PMAGB-B framebuffer in - the 5000/1xx versions of the DECstation. There is a page dedicated - to Linux on DECstations at . + Support for the PMAGB-B TURBOchannel framebuffer card used mainly + in the MIPS-based DECstation series. The card is currently only + supported in 1280x1024x8 mode. config FB_MAXINE - bool "Maxine (Personal DECstation) onboard framebuffer spport" - depends on FB && DECSTATION && TC + bool "Maxine (Personal DECstation) onboard framebuffer support" + depends on (FB = y) && MACH_DECSTATION + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - Say Y here to directly support the on-board framebuffer in the - Maxine (5000/20, /25, /33) version of the DECstation. There is a - page dedicated to Linux on DECstations at . + Support for the onboard framebuffer (1024x768x8) in the Personal + DECstation series (Personal DECstation 5000/20, /25, /33, /50, + Codename "Maxine"). config FB_TX3912 bool "TMPTX3912/PR31700 frame buffer support" - depends on FB && NINO + depends on (FB = y) && NINO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see . Say Y here to enable kernel support for the on-board framebuffer. +config FB_G364 + bool "G364 frame buffer support" + depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + The G364 driver is the framebuffer used in MIPS Magnum 4000 and + Olivetti M700-10 systems. + config FB_68328 bool "Motorola 68328 native frame buffer support" - depends on (M68328 || M68EZ328 || M68VZ328) + depends on FB && (M68328 || M68EZ328 || M68VZ328) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -959,13 +1510,16 @@ config FB_68328 config FB_PXA tristate "PXA LCD framebuffer support" depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, + module will be called pxafb. If you want to compile it as a module, say M here and read . If unsure, say N. @@ -985,11 +1539,98 @@ config FB_PXA_PARAMETERS single model of flatpanel then you can safely leave this option disabled. - Documentation/fb/pxafb.txt describes the available parameters. + describes the available parameters. + +config FB_MBX + tristate "2700G LCD framebuffer support" + depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Framebuffer driver for the Intel 2700G (Marathon) Graphics + Accelerator + +config FB_MBX_DEBUG + bool "Enable debugging info via debugfs" + depends on FB_MBX && DEBUG_FS + default n + ---help--- + Enable this if you want debugging information using the debug + filesystem (debugfs) + + If unsure, say N. + +config FB_W100 + tristate "W100 frame buffer support" + depends on FB && PXA_SHARPSL + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called w100fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. + +config FB_S3C2410 + tristate "S3C2410 LCD framebuffer support" + depends on FB && ARCH_S3C2410 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the built-in LCD controller in the Samsung + S3C2410 processor. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called s3c2410fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. +config FB_S3C2410_DEBUG + bool "S3C2410 lcd debug messages" + depends on FB_S3C2410 + help + Turn on debugging messages. Note that you can set/unset at run time + through sysfs + +config FB_PNX4008_DUM + tristate "Display Update Module support on Philips PNX4008 board" + depends on FB && ARCH_PNX4008 + ---help--- + Say Y here to enable support for PNX4008 Display Update Module (DUM) + +config FB_PNX4008_DUM_RGB + tristate "RGB Framebuffer support on Philips PNX4008 board" + depends on FB_PNX4008_DUM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for PNX4008 RGB Framebuffer + +config FB_IBM_GXT4500 + tristate "Framebuffer support for IBM GXT4500P adaptor" + depends on PPC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for the IBM GXT4500P display + adaptor, found on some IBM System P (pSeries) machines. config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics @@ -1001,7 +1642,8 @@ config FB_VIRTUAL kernel option `video=vfb:'. To compile this driver as a module, choose M here: the - module will be called vfb. + module will be called vfb. In order to load it, you must use + the vfb_enable=1 option. If unsure, say N. if VT @@ -1012,5 +1654,9 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif +if SYSFS + source "drivers/video/backlight/Kconfig" +endif + endmenu