X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fvideo%2Fgeode%2Fvideo_gx.c;h=7f3f18d06718846483d5c67d0dcfb2a3caf52ceb;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=2b2a7880ea751fe579b7ff9bd5eebdf19a5bca73;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/drivers/video/geode/video_gx.c b/drivers/video/geode/video_gx.c
index 2b2a7880e..7f3f18d06 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/geode/video_gx.c
@@ -175,13 +175,88 @@ static void gx_set_dclk_frequency(struct fb_info *info)
 	} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
 }
 
+static void
+gx_configure_tft(struct fb_info *info)
+{
+	struct geodefb_par *par = info->par;
+	unsigned long val;
+	unsigned long fp;
+
+	/* Set up the DF pad select MSR */
+
+	rdmsrl(GX_VP_MSR_PAD_SELECT, val);
+	val &= ~GX_VP_PAD_SELECT_MASK;
+	val |= GX_VP_PAD_SELECT_TFT;
+	wrmsrl(GX_VP_MSR_PAD_SELECT, val);
+
+	/* Turn off the panel */
+
+	fp = readl(par->vid_regs + GX_FP_PM);
+	fp &= ~GX_FP_PM_P;
+	writel(fp, par->vid_regs + GX_FP_PM);
+
+	/* Set timing 1 */
+
+	fp = readl(par->vid_regs + GX_FP_PT1);
+	fp &= GX_FP_PT1_VSIZE_MASK;
+	fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
+	writel(fp, par->vid_regs + GX_FP_PT1);
+
+	/* Timing 2 */
+	/* Set bits that are always on for TFT */
+
+	fp = 0x0F100000;
+
+	/* Add sync polarity */
+
+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+		fp |= GX_FP_PT2_VSP;
+
+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+		fp |= GX_FP_PT2_HSP;
+
+	writel(fp, par->vid_regs + GX_FP_PT2);
+
+	/*  Set the dither control */
+	writel(0x70, par->vid_regs + GX_FP_DFC);
+
+	/* Enable the FP data and power (in case the BIOS didn't) */
+
+	fp = readl(par->vid_regs + GX_DCFG);
+	fp |= GX_DCFG_FP_PWR_EN | GX_DCFG_FP_DATA_EN;
+	writel(fp, par->vid_regs + GX_DCFG);
+
+	/* Unblank the panel */
+
+	fp = readl(par->vid_regs + GX_FP_PM);
+	fp |= GX_FP_PM_P;
+	writel(fp, par->vid_regs + GX_FP_PM);
+}
+
 static void gx_configure_display(struct fb_info *info)
 {
 	struct geodefb_par *par = info->par;
-	u32 dcfg, fp_pm;
+	u32 dcfg, misc;
+
+	/* Set up the MISC register */
+
+	misc = readl(par->vid_regs + GX_MISC);
+
+	/* Power up the DAC */
+	misc &= ~(GX_MISC_A_PWRDN | GX_MISC_DAC_PWRDN);
+
+	/* Disable gamma correction */
+	misc |= GX_MISC_GAM_EN;
+
+	writel(misc, par->vid_regs + GX_MISC);
 
+	/* Write the display configuration */
 	dcfg = readl(par->vid_regs + GX_DCFG);
 
+	/* Disable hsync and vsync */
+	dcfg &= ~(GX_DCFG_VSYNC_EN | GX_DCFG_HSYNC_EN);
+	writel(dcfg, par->vid_regs + GX_DCFG);
+
 	/* Clear bits from existing mode. */
 	dcfg &= ~(GX_DCFG_CRT_SYNC_SKW_MASK
 		  | GX_DCFG_CRT_HSYNC_POL   | GX_DCFG_CRT_VSYNC_POL
@@ -199,12 +274,19 @@ static void gx_configure_display(struct fb_info *info)
 	if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
 		dcfg |= GX_DCFG_CRT_VSYNC_POL;
 
+	/* Enable the display logic */
+	/* Set up the DACS to blank normally */
+
+	dcfg |= GX_DCFG_CRT_EN | GX_DCFG_DAC_BL_EN;
+
+	/* Enable the external DAC VREF? */
+
 	writel(dcfg, par->vid_regs + GX_DCFG);
 
-	/* Power on flat panel. */
-	fp_pm = readl(par->vid_regs + GX_FP_PM);
-	fp_pm |= GX_FP_PM_P;
-	writel(fp_pm, par->vid_regs + GX_FP_PM);
+	/* Set up the flat panel (if it is enabled) */
+
+	if (par->enable_crt == 0)
+		gx_configure_tft(info);
 }
 
 static int gx_blank_display(struct fb_info *info, int blank_mode)
@@ -245,12 +327,15 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
 	writel(dcfg, par->vid_regs + GX_DCFG);
 
 	/* Power on/off flat panel. */
-	fp_pm = readl(par->vid_regs + GX_FP_PM);
-	if (blank_mode == FB_BLANK_POWERDOWN)
-		fp_pm &= ~GX_FP_PM_P;
-	else
-		fp_pm |= GX_FP_PM_P;
-	writel(fp_pm, par->vid_regs + GX_FP_PM);
+
+	if (par->enable_crt == 0) {
+		fp_pm = readl(par->vid_regs + GX_FP_PM);
+		if (blank_mode == FB_BLANK_POWERDOWN)
+			fp_pm &= ~GX_FP_PM_P;
+		else
+			fp_pm |= GX_FP_PM_P;
+		writel(fp_pm, par->vid_regs + GX_FP_PM);
+	}
 
 	return 0;
 }