X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=drivers%2Fvideo%2Fi810%2Fi810_main.h;fp=drivers%2Fvideo%2Fi810%2Fi810_main.h;h=51d4f3d4116dda55e130360b89cc02e06cdfa984;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=43b4297b4d481642b1c38aa5731f542076a8361c;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/drivers/video/i810/i810_main.h b/drivers/video/i810/i810_main.h
index 43b4297b4..51d4f3d41 100644
--- a/drivers/video/i810/i810_main.h
+++ b/drivers/video/i810/i810_main.h
@@ -14,55 +14,6 @@
 #ifndef __I810_MAIN_H__
 #define __I810_MAIN_H__
 
-static int  __devinit i810fb_init_pci (struct pci_dev *dev, 
-				       const struct pci_device_id *entry);
-static void __exit i810fb_remove_pci(struct pci_dev *dev);
-static int i810fb_resume(struct pci_dev *dev);
-static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
-
-/*
- * voffset - framebuffer offset in MiB from aperture start address.  In order for
- * the driver to work with X, we must try to use memory holes left untouched by X. The 
- * following table lists where X's different surfaces start at.  
- * 
- * ---------------------------------------------
- * :                :  64 MiB     : 32 MiB      :
- * ----------------------------------------------
- * : FrontBuffer    :   0         :  0          :
- * : DepthBuffer    :   48        :  16         :
- * : BackBuffer     :   56        :  24         :
- * ----------------------------------------------
- *
- * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
- * 15 + 1 MiB of Framebuffer memory.  For 32 MiB Aperture sizes, a v_offset of 8 MiB should
- * work, allowing 7 + 1 MiB of Framebuffer memory.
- * Note, the size of the hole may change depending on how much memory you allocate to X,
- * and how the memory is split up between these surfaces.  
- *
- * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
- * DRI disabled.  But if the Frontbuffer is overlapped, X will fail to load.
- * 
- * Experiment with v_offset to find out which works best for you.
- */
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset          __initdata = 0;
-
-static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
-
-/* Chipset Specific Functions */
-static int i810fb_set_par    (struct fb_info *info);
-static int i810fb_getcolreg  (u8 regno, u8 *red, u8 *green, u8 *blue,
-			      u8 *transp, struct fb_info *info);
-static int i810fb_setcolreg  (unsigned regno, unsigned red, unsigned green, unsigned blue,
-			      unsigned transp, struct fb_info *info);
-static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
-static int i810fb_blank      (int blank_mode, struct fb_info *info);
-
-/* Initialization */
-static void i810fb_release_resource       (struct fb_info *info, struct i810fb_par *par);
-extern int __init agp_intel_init(void);
-
-
 /* Video Timings */
 extern void round_off_xres         (u32 *xres);
 extern void round_off_yres         (u32 *xres, u32 *yres);
@@ -83,9 +34,25 @@ extern int  i810fb_sync     (struct fb_info *p);
 extern void i810fb_init_ringbuffer(struct fb_info *info);
 extern void i810fb_load_front     (u32 offset, struct fb_info *info);
 
+#ifdef CONFIG_FB_I810_I2C
+/* I2C */
+extern int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
+				    int conn);
+extern void i810_create_i2c_busses(struct i810fb_par *par);
+extern void i810_delete_i2c_busses(struct i810fb_par *par);
+#else
+static inline int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
+				    int conn)
+{
+	return 1;
+}
+static inline void i810_create_i2c_busses(struct i810fb_par *par) { }
+static inline void i810_delete_i2c_busses(struct i810fb_par *par) { }
+#endif
+
 /* Conditionals */
 #ifdef CONFIG_X86
-inline void flush_cache(void)
+static inline void flush_cache(void)
 {
 	asm volatile ("wbinvd":::"memory");
 }
@@ -94,7 +61,9 @@ inline void flush_cache(void)
 #endif 
 
 #ifdef CONFIG_MTRR
-#define KERNEL_HAS_MTRR 1
+
+#include <asm/mtrr.h>
+
 static inline void __devinit set_mtrr(struct i810fb_par *par)
 {
 	par->mtrr_reg = mtrr_add((u32) par->aperture.physical, 
@@ -112,7 +81,6 @@ static inline void unset_mtrr(struct i810fb_par *par)
 			 par->aperture.size); 
 }
 #else
-#define KERNEL_HAS_MTRR 0
 #define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")
 
 #define unset_mtrr(x) do { } while (0)