X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fasm-arm%2Farch-omap%2Fboard.h;h=edf1dc6ad919b45ec807807762c1cdcd37c487e8;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=a24193510e90e8a946ee645e60eef16c95bdc51b;hpb=c7b5ebbddf7bcd3651947760f423e3783bbe6573;p=linux-2.6.git

diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index a24193510..edf1dc6ad 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -10,31 +10,64 @@
 #ifndef _OMAP_BOARD_H
 #define _OMAP_BOARD_H
 
-#include <linux/config.h>
 #include <linux/types.h>
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
 #define OMAP_TAG_MMC		0x4f02
-#define OMAP_TAG_UART		0x4f03
-#define OMAP_TAG_USB            0x4f04
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
 
 struct omap_clock_config {
 	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
 	u8 system_clock_type;
 };
 
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
 struct omap_mmc_config {
-	u8 mmc_blocks;
-	s8 mmc1_power_pin, mmc2_power_pin;
-	s8 mmc1_switch_pin, mmc2_switch_pin;
+	struct omap_mmc_conf mmc[2];
 };
 
-struct omap_uart_config {
+struct omap_serial_console_config {
 	u8 console_uart;
 	u32 console_speed;
 };
 
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
 struct omap_usb_config {
 	/* Configure drivers according to the connectors on your board:
 	 *  - "A" connector (rectagular)
@@ -63,6 +96,59 @@ struct omap_usb_config {
 	u8		pins[3];
 };
 
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+};
+
+struct omap_fbmem_config {
+	u32 fb_sram_start;
+	u32 fb_sram_size;
+	u32 fb_sdram_start;
+	u32 fb_sdram_size;
+};
+
+/* Cover:
+ *      high -> closed
+ *      low  -> open
+ * Connection:
+ *      high -> connected
+ *      low  -> disconnected
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+
+#include <asm-arm/arch-omap/board-nokia.h>
+
 struct omap_board_config_entry {
 	u16 tag;
 	u16 len;
@@ -74,10 +160,14 @@ struct omap_board_config_kernel {
 	const void *data;
 };
 
-extern const void *__omap_get_config(u16 tag, size_t len);
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
 
 #define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type)))
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
 
 extern struct omap_board_config_kernel *omap_board_config;
 extern int omap_board_config_size;