X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fasm-arm%2Farch-s3c2410%2Funcompress.h;h=a6f6a0e44afaf2e818a716288fc7ba34e1316ffc;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=d7a4a8354fa9854be8a2bc23203a0336b57b93fa;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h
index d7a4a8354..a6f6a0e44 100644
--- a/include/asm-arm/arch-s3c2410/uncompress.h
+++ b/include/asm-arm/arch-s3c2410/uncompress.h
@@ -35,13 +35,13 @@
 #undef S3C2410_GPIOREG
 #undef S3C2410_WDOGREG
 
-#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
-#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
 
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
-#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
+#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
 
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
@@ -67,8 +67,7 @@ uart_rd(unsigned int reg)
  * waiting for tx to happen...
 */
 
-static void
-putc(char ch)
+static void putc(int ch)
 {
 	int cpuid = S3C2410_GSTATUS1_2410;
 
@@ -77,9 +76,6 @@ putc(char ch)
 	cpuid &= S3C2410_GSTATUS1_IDMASK;
 #endif
 
-	if (ch == '\n')
-		putc('\r');    /* expand newline to \r\n */
-
 	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
 		int level;
 
@@ -101,21 +97,20 @@ putc(char ch)
 	} else {
 		/* not using fifos */
 
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE);
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
 	}
 
 	/* write byte to transmission register */
 	uart_wr(S3C2410_UTXH, ch);
 }
 
-static void
-putstr(const char *ptr)
+static inline void flush(void)
 {
-	for (; *ptr != '\0'; ptr++) {
-		putc(*ptr);
-	}
 }
 
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
 /* CONFIG_S3C2410_BOOT_WATCHDOG
  *
  * Simple boot-time watchdog setup, to reboot the system if there is
@@ -126,8 +121,6 @@ putstr(const char *ptr)
 
 #define WDOG_COUNT (0xff00)
 
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
-
 static inline void arch_decomp_wdog(void)
 {
 	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
@@ -145,6 +138,24 @@ static void arch_decomp_wdog_start(void)
 #define arch_decomp_wdog()
 #endif
 
+#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
 static void error(char *err);
 
 static void