X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fasm-sh%2Flandisk%2Fiodata_landisk.h;fp=include%2Fasm-sh%2Flandisk%2Fiodata_landisk.h;h=c74d3c73f37720da02f764d29419669c70ef6fca;hb=76828883507a47dae78837ab5dec5a5b4513c667;hp=0000000000000000000000000000000000000000;hpb=64ba3f394c830ec48a1c31b53dcae312c56f1604;p=linux-2.6.git

diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h
new file mode 100644
index 000000000..c74d3c73f
--- /dev/null
+++ b/include/asm-sh/landisk/iodata_landisk.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * linux/include/asm-sh/landisk/iodata_landisk.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_USB		0xa4000000	/* USB Controller M66590 */
+
+#define PA_ATARST	0xb0000000	/* ATA/FATA Access Control Register */
+#define PA_LED		0xb0000001	/* LED Control Register */
+#define PA_STATUS	0xb0000002	/* Switch Status Register */
+#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
+#define PA_PCIPME	0xb0000004	/* PCI PME Status Register */
+#define PA_IMASK	0xb0000005	/* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG	add.	for shutdown port clear */
+#define PA_PWRINT_CLR	0xb0000006	/* Shutdown Interrupt clear Register */
+
+#define PA_LCD_CLRDSP	0x00		/* LCD Clear Display Offset */
+#define PA_LCD_RTNHOME	0x00		/* LCD Return Home Offset */
+#define PA_LCD_ENTMODE	0x00		/* LCD Entry Mode Offset */
+#define PA_LCD_DSPCTL	0x00		/* LCD Display ON/OFF Control Offset */
+#define PA_LCD_FUNC	0x00		/* LCD Function Set Offset */
+#define PA_LCD_CGRAM	0x00		/* LCD Set CGRAM Address Offset */
+#define PA_LCD_DDRAM	0x00		/* LCD Set DDRAM Address Offset */
+#define PA_LCD_RDFLAG	0x01		/* LCD Read Busy Flag Offset */
+#define PA_LCD_WTDATA	0x02		/* LCD Write Datat to RAM Offset */
+#define PA_LCD_RDDATA	0x03		/* LCD Read Data from RAM Offset */
+#define PA_PIDE_OFFSET	0x40		/* CF IDE Offset */
+#define PA_SIDE_OFFSET	0x40		/* HDD IDE Offset */
+
+#define IRQ_PCIINTA	5		/* PCI INTA IRQ */
+#define IRQ_PCIINTB	6		/* PCI INTB IRQ */
+#define IRQ_PCIINDC	7		/* PCI INTC IRQ */
+#define IRQ_PCIINTD	8		/* PCI INTD IRQ */
+#define IRQ_ATA		9		/* ATA IRQ */
+#define IRQ_FATA	10		/* FATA IRQ */
+#define IRQ_POWER	11		/* Power Switch IRQ */
+#define IRQ_BUTTON	12		/* USL-5P Button IRQ */
+#define IRQ_FAULT	13		/* USL-5P Fault  IRQ */
+
+#define SHUTDOWN_BTN_MAJOR	99	/* Shutdown button device major no. */
+
+#define SHUTDOWN_LOOP_CNT	5	/* Shutdown button Detection loop */
+#define SHUTDOWN_DELAY		200	/* Shutdown button delay value(ms) */
+
+
+/* added by kogiidena */
+/*
+ *  landisk_ledparam
+ *
+ * led  ------10 -6543210 -6543210 -6543210
+ *     |000000..|0.......|0.......|U.......|
+ *     |  HARD  |fastblik| blink  |   on   |
+ *
+ *   led0: power       U:update flag
+ *   led1: error
+ *   led2: usb1
+ *   led3: usb2
+ *   led4: usb3
+ *   led5: usb4
+ *   led6: usb5
+ *
+ */
+extern int landisk_ledparam;    /* from setup.c */
+extern int landisk_buzzerparam; /* from setup.c */
+extern int landisk_arch;        /* from setup.c */
+
+#define __IO_PREFIX landisk
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_IODATA_LANDISK_H */
+