X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Flinux%2Fethtool.h;h=93535f0932167818e5e7e9c168188cbed0626df9;hb=43bc926fffd92024b46cafaf7350d669ba9ca884;hp=a0ab26aab450db653ab44d45296bc2809b42b13a;hpb=cee37fe97739d85991964371c1f3a745c00dd236;p=linux-2.6.git

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index a0ab26aab..93535f093 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -250,6 +250,12 @@ struct ethtool_stats {
 	u64	data[0];
 };
 
+struct ethtool_perm_addr {
+	u32	cmd;		/* ETHTOOL_GPERMADDR */
+	u32	size;
+	u8	data[0];
+};
+
 struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
@@ -261,6 +267,10 @@ u32 ethtool_op_get_sg(struct net_device *dev);
 int ethtool_op_set_sg(struct net_device *dev, u32 data);
 u32 ethtool_op_get_tso(struct net_device *dev);
 int ethtool_op_set_tso(struct net_device *dev, u32 data);
+int ethtool_op_get_perm_addr(struct net_device *dev, 
+			     struct ethtool_perm_addr *addr, u8 *data);
+u32 ethtool_op_get_ufo(struct net_device *dev);
+int ethtool_op_set_ufo(struct net_device *dev, u32 data);
 
 /**
  * &ethtool_ops - Alter and report network device settings
@@ -290,11 +300,14 @@ int ethtool_op_set_tso(struct net_device *dev, u32 data);
  * set_sg: Turn scatter-gather on or off
  * get_tso: Report whether TCP segmentation offload is enabled
  * set_tso: Turn TCP segmentation offload on or off
+ * get_ufo: Report whether UDP fragmentation offload is enabled
+ * set_ufo: Turn UDP fragmentation offload on or off
  * self_test: Run specified self-tests
  * get_strings: Return a set of strings that describe the requested objects 
  * phys_id: Identify the device
  * get_stats: Return statistics about the device
- *
+ * get_perm_addr: Gets the permanent hardware address
+ * 
  * Description:
  *
  * get_settings:
@@ -352,8 +365,11 @@ struct ethtool_ops {
 	int	(*phys_id)(struct net_device *, u32);
 	int	(*get_stats_count)(struct net_device *);
 	void	(*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
+	int	(*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *);
 	int	(*begin)(struct net_device *);
 	void	(*complete)(struct net_device *);
+	u32     (*get_ufo)(struct net_device *);
+	int     (*set_ufo)(struct net_device *, u32);
 };
 
 /* CMDs currently supported */
@@ -389,6 +405,9 @@ struct ethtool_ops {
 #define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
 #define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
 #define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
@@ -408,6 +427,8 @@ struct ethtool_ops {
 #define SUPPORTED_FIBRE			(1 << 10)
 #define SUPPORTED_BNC			(1 << 11)
 #define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half		(1 << 0)
@@ -423,6 +444,8 @@ struct ethtool_ops {
 #define ADVERTISED_FIBRE		(1 << 10)
 #define ADVERTISED_BNC			(1 << 11)
 #define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -430,10 +453,11 @@ struct ethtool_ops {
  * it was foced up into this mode or autonegotiated.
  */
 
-/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
 #define SPEED_10		10
 #define SPEED_100		100
 #define SPEED_1000		1000
+#define SPEED_2500		2500
 #define SPEED_10000		10000
 
 /* Duplex, half or full. */