X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Flinux%2Fif.h;fp=include%2Flinux%2Fif.h;h=32bf419351f184242dfd5af400dd1859f297282d;hb=97bf2856c6014879bd04983a3e9dfcdac1e7fe85;hp=ce627d9092efbc7c97d1de649996d771183386f3;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/include/linux/if.h b/include/linux/if.h
index ce627d909..32bf41935 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -33,7 +33,7 @@
 #define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
 #define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
 #define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
-#define	IFF_RUNNING	0x40		/* interface running and carrier ok */
+#define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
 #define	IFF_NOARP	0x80		/* no ARP protocol		*/
 #define	IFF_PROMISC	0x100		/* receive all packets		*/
 #define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
@@ -43,15 +43,24 @@
 
 #define IFF_MULTICAST	0x1000		/* Supports multicast		*/
 
-#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING)
-
 #define IFF_PORTSEL	0x2000          /* can set media type		*/
 #define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
 #define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
 
+#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
+#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
+
+#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|\
+		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
+
 /* Private (from user) interface flags (netdevice->priv_flags). */
 #define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
 #define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
+#define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
+#define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
+#define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
+#define IFF_BONDING	0x20		/* bonding master or slave	*/
+#define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
 
 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
@@ -80,6 +89,22 @@
 #define IF_PROTO_FR_ETH_PVC 0x200B
 #define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
 
+/* RFC 2863 operational status */
+enum {
+	IF_OPER_UNKNOWN,
+	IF_OPER_NOTPRESENT,
+	IF_OPER_DOWN,
+	IF_OPER_LOWERLAYERDOWN,
+	IF_OPER_TESTING,
+	IF_OPER_DORMANT,
+	IF_OPER_UP,
+};
+
+/* link modes */
+enum {
+	IF_LINK_MODE_DEFAULT,
+	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
+};
 
 /*
  *	Device mapping structure. I'd just gone off and designed a 
@@ -189,5 +214,4 @@ struct ifconf
 #define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
 #define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
 
-
 #endif /* _LINUX_IF_H */