X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Flinux%2Fpci_regs.h;h=7a6d34ee5ab132593c2efce4000edd3bb3af3408;hb=refs%2Fheads%2Fvserver;hp=d27a78b71297058158af0760aa666cd60567480f;hpb=76828883507a47dae78837ab5dec5a5b4513c667;p=linux-2.6.git

diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index d27a78b71..7a6d34ee5 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -12,6 +12,11 @@
  *	PCI Local Bus Specification
  *	PCI to PCI Bridge Specification
  *	PCI System Design Guide
+ *
+ * 	For hypertransport information, please consult the following manuals
+ * 	from http://www.hypertransport.org
+ *
+ *	The Hypertransport I/O Link Specification
  */
 
 #ifndef LINUX_PCI_REGS_H
@@ -196,7 +201,8 @@
 #define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
 #define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
 #define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
-#define  PCI_CAP_ID_HT_IRQCONF	0x08	/* HyperTransport IRQ Configuration */
+#define  PCI_CAP_ID_HT		0x08	/* HyperTransport */
+#define  PCI_CAP_ID_VNDR	0x09	/* Vendor specific capability */
 #define  PCI_CAP_ID_SHPC 	0x0C	/* PCI Standard Hot-Plug Controller */
 #define  PCI_CAP_ID_EXP 	0x10	/* PCI Express */
 #define  PCI_CAP_ID_MSIX	0x11	/* MSI-X */
@@ -286,6 +292,12 @@
 #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
 #define PCI_MSI_MASK_BIT	16	/* Mask bits register */
 
+/* MSI-X registers (these are at offset PCI_MSI_FLAGS) */
+#define PCI_MSIX_FLAGS_QSIZE	0x7FF
+#define PCI_MSIX_FLAGS_ENABLE	(1 << 15)
+#define PCI_MSIX_FLAGS_BIRMASK	(7 << 0)
+#define PCI_MSIX_FLAGS_BITMASK	(1 << 0)
+
 /* CompactPCI Hotswap Register */
 
 #define PCI_CHSWP_CSR		2	/* Control and Status Register */
@@ -365,6 +377,7 @@
 #define  PCI_EXP_DEVSTA_TRPND	0x20	/* Transactions Pending */
 #define PCI_EXP_LNKCAP		12	/* Link Capabilities */
 #define PCI_EXP_LNKCTL		16	/* Link Control */
+#define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100	/* Enable clkreq */
 #define PCI_EXP_LNKSTA		18	/* Link Status */
 #define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
 #define PCI_EXP_SLTCTL		24	/* Slot Control */
@@ -421,7 +434,23 @@
 #define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
 #define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
 #define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
 #define PCI_ERR_ROOT_STATUS	48
+#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
 #define PCI_ERR_ROOT_COR_SRC	52
 #define PCI_ERR_ROOT_SRC	54
 
@@ -446,4 +475,37 @@
 #define PCI_PWR_CAP		12	/* Capability */
 #define  PCI_PWR_CAP_BUDGET(x)	((x) & 1)	/* Included in system budget */
 
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK	0xE0
+#define HT_CAPTYPE_SLAVE	0x00	/* Slave/Primary link configuration */
+#define HT_CAPTYPE_HOST		0x20	/* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK	0xF8
+#define HT_CAPTYPE_IRQ		0x80	/* IRQ Configuration */
+#define HT_CAPTYPE_REMAPPING_40	0xA0	/* 40 bit address remapping */
+#define HT_CAPTYPE_REMAPPING_64 0xA2	/* 64 bit address remapping */
+#define HT_CAPTYPE_UNITID_CLUMP	0x90	/* Unit ID clumping */
+#define HT_CAPTYPE_EXTCONF	0x98	/* Extended Configuration Space Access */
+#define HT_CAPTYPE_MSI_MAPPING	0xA8	/* MSI Mapping Capability */
+#define  HT_MSI_FLAGS		0x02		/* Offset to flags */
+#define  HT_MSI_FLAGS_ENABLE	0x1		/* Mapping enable */
+#define  HT_MSI_FLAGS_FIXED	0x2		/* Fixed mapping only */
+#define  HT_MSI_FIXED_ADDR	0x00000000FEE00000ULL	/* Fixed addr */
+#define  HT_MSI_ADDR_LO		0x04		/* Offset to low addr bits */
+#define  HT_MSI_ADDR_LO_MASK	0xFFF00000	/* Low address bit mask */
+#define  HT_MSI_ADDR_HI		0x08		/* Offset to high addr bits */
+#define HT_CAPTYPE_DIRECT_ROUTE	0xB0	/* Direct routing configuration */
+#define HT_CAPTYPE_VCSET	0xB8	/* Virtual Channel configuration */
+#define HT_CAPTYPE_ERROR_RETRY	0xC0	/* Retry on error configuration */
+#define HT_CAPTYPE_GEN3		0xD0	/* Generation 3 hypertransport configuration */
+#define HT_CAPTYPE_PM		0xE0	/* Hypertransport powermanagement configuration */
+
+
 #endif /* LINUX_PCI_REGS_H */