X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Flinux%2Ftimex.h;h=b54c288dd6b8324fcb2c092b3cc52bf18734c2f8;hb=6a77f38946aaee1cd85eeec6cf4229b204c15071;hp=31ef4595b1fd87d40b12f9d886793531cf82daaa;hpb=87fc8d1bb10cd459024a742c6a10961fefcef18f;p=linux-2.6.git

diff --git a/include/linux/timex.h b/include/linux/timex.h
index 31ef4595b..b54c288dd 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -55,33 +55,10 @@
 
 #include <linux/config.h>
 #include <linux/compiler.h>
+#include <linux/time.h>
 
 #include <asm/param.h>
-
-/*
- * The following defines establish the engineering parameters of the PLL
- * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
- * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
- * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
- * nearest power of two in order to avoid hardware multiply operations.
- */
-#if HZ >= 12 && HZ < 24
-# define SHIFT_HZ	4
-#elif HZ >= 24 && HZ < 48
-# define SHIFT_HZ	5
-#elif HZ >= 48 && HZ < 96
-# define SHIFT_HZ	6
-#elif HZ >= 96 && HZ < 192
-# define SHIFT_HZ	7
-#elif HZ >= 192 && HZ < 384
-# define SHIFT_HZ	8
-#elif HZ >= 384 && HZ < 768
-# define SHIFT_HZ	9
-#elif HZ >= 768 && HZ < 1536
-# define SHIFT_HZ	10
-#else
-# error You lose.
-#endif
+#include <asm/timex.h>
 
 /*
  * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
@@ -151,41 +128,6 @@
 #define PPS_VALID 120		/* pps signal watchdog max (s) */
 #define MAXGLITCH 30		/* pps signal glitch max (s) */
 
-/*
- * Pick up the architecture specific timex specifications
- */
-#include <asm/timex.h>
-
-/* LATCH is used in the interval timer and ftape setup. */
-#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
-
-/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
- * improve accuracy by shifting LSH bits, hence calculating:
- *     (NOM << LSH) / DEN
- * This however means trouble for large NOM, because (NOM << LSH) may no
- * longer fit in 32 bits. The following way of calculating this gives us
- * some slack, under the following conditions:
- *   - (NOM / DEN) fits in (32 - LSH) bits.
- *   - (NOM % DEN) fits in (32 - LSH) bits.
- */
-#define SH_DIV(NOM,DEN,LSH) (   ((NOM / DEN) << LSH)                    \
-                             + (((NOM % DEN) << LSH) + DEN / 2) / DEN)
-
-/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
-#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
-
-/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
-#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
-
-/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
-#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
-
-/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and	*/
-/* a value TUSEC for TICK_USEC (can be set bij adjtimex)		*/
-#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
-
-
-#include <linux/time.h>
 /*
  * syscall interface - used (mainly by NTP daemon)
  * to discipline kernel clock oscillator
@@ -343,20 +285,18 @@ extern long pps_stbcnt;		/* stability limit exceeded */
  * for the compensation is that the timer routines are not as scalable anymore.
  */
 
-#define INTERPOLATOR_ADJUST 65536
-#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
-
 struct time_interpolator {
-	unsigned short source;		/* time source flags */
-	unsigned char shift;		/* increases accuracy of multiply by shifting. */
-			/* Note that bits may be lost if shift is set too high */
-	unsigned char jitter;		/* if set compensate for fluctuations */
-	unsigned nsec_per_cyc;		/* set by register_time_interpolator() */
+	u16 source;			/* time source flags */
+	u8 shift;			/* increases accuracy of multiply by shifting. */
+				/* Note that bits may be lost if shift is set too high */
+	u8 jitter;			/* if set compensate for fluctuations */
+	u32 nsec_per_cyc;		/* set by register_time_interpolator() */
 	void *addr;			/* address of counter or function */
+	u64 mask;			/* mask the valid bits of the counter */
 	unsigned long offset;		/* nsec offset at last update of interpolator */
-	unsigned long last_counter;	/* counter value in units of the counter at last update */
-	unsigned long last_cycle;	/* Last timer value if TIME_SOURCE_JITTER is set */
-	unsigned long frequency;	/* frequency in counts/second */
+	u64 last_counter;		/* counter value in units of the counter at last update */
+	u64 last_cycle;			/* Last timer value if TIME_SOURCE_JITTER is set */
+	u64 frequency;			/* frequency in counts/second */
 	long drift;			/* drift in parts-per-million (or -1) */
 	unsigned long skips;		/* skips forward */
 	unsigned long ns_skipped;	/* nanoseconds skipped */
@@ -366,7 +306,6 @@ struct time_interpolator {
 extern void register_time_interpolator(struct time_interpolator *);
 extern void unregister_time_interpolator(struct time_interpolator *);
 extern void time_interpolator_reset(void);
-extern unsigned long time_interpolator_resolution(void);
 extern unsigned long time_interpolator_get_offset(void);
 
 #else /* !CONFIG_TIME_INTERPOLATION */