X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fopenflow%2Fnicira-ext.h;h=630511b0a9edaa2fea966d58ec3b5ab1eb168150;hb=44d3732d5e172a8528ae2f36c232dfa5a1c18b74;hp=bb0fb3a73004230e6bf951fff28cac29e3c35a00;hpb=548349603423bea41ec2989583231c1a117f6a9e;p=sliver-openvswitch.git diff --git a/include/openflow/nicira-ext.h b/include/openflow/nicira-ext.h index bb0fb3a73..630511b0a 100644 --- a/include/openflow/nicira-ext.h +++ b/include/openflow/nicira-ext.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks + * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira, Inc. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -20,7 +20,7 @@ #include "openflow/openflow.h" #include "openvswitch/types.h" -/* The following vendor extensions, proposed by Nicira Networks, are not yet +/* The following vendor extensions, proposed by Nicira, are not yet * standardized, so they are not included in openflow.h. Some of them may be * suitable for standardization; others we never expect to standardize. */ @@ -67,64 +67,6 @@ struct nx_vendor_error { /* Followed by at least the first 64 bytes of the failed request. */ }; -/* Specific Nicira extension error numbers. - * - * These are the "code" values used in nx_vendor_error. So far, the "type" - * values in nx_vendor_error are the same as those in ofp_error_msg. That is, - * at Nicira so far we've only needed additional vendor-specific 'code' values, - * so we're using the existing 'type' values to avoid having to invent new ones - * that duplicate the current ones' meanings. */ - -/* Additional "code" values for OFPET_BAD_REQUEST. */ -enum nx_bad_request_code { -/* Nicira Extended Match (NXM) errors. */ - - /* Generic error code used when there is an error in an NXM sent to the - * switch. The switch may use one of the more specific error codes below, - * if there is an appropriate one, to simplify debugging, but it is not - * required to do so. */ - NXBRC_NXM_INVALID = 0x100, - - /* The nxm_type, or nxm_type taken in combination with nxm_hasmask or - * nxm_length or both, is invalid or not implemented. */ - NXBRC_NXM_BAD_TYPE = 0x101, - - /* Invalid nxm_value. */ - NXBRC_NXM_BAD_VALUE = 0x102, - - /* Invalid nxm_mask. */ - NXBRC_NXM_BAD_MASK = 0x103, - - /* A prerequisite was not met. */ - NXBRC_NXM_BAD_PREREQ = 0x104, - - /* A given nxm_type was specified more than once. */ - NXBRC_NXM_DUP_TYPE = 0x105, - -/* Other errors. */ - - /* A request specified a nonexistent table ID. (But NXFMFC_BAD_TABLE_ID is - * used instead, when it is appropriate, because that is such a special - * case.) */ - NXBRC_BAD_TABLE_ID = 0x200, - - /* NXT_ROLE_REQUEST specified an invalid role. */ - NXBRC_BAD_ROLE = 0x201, - - /* The in_port in an ofp_packet_out request is invalid. */ - NXBRC_BAD_IN_PORT = 0x202 -}; - -/* Additional "code" values for OFPET_FLOW_MOD_FAILED. */ -enum nx_flow_mod_failed_code { - /* Generic hardware error. */ - NXFMFC_HARDWARE = 0x100, - - /* A nonexistent table ID was specified in the "command" field of struct - * ofp_flow_mod, when the nxt_flow_mod_table_id extension is enabled. */ - NXFMFC_BAD_TABLE_ID = 0x101 -}; - /* Nicira vendor requests and replies. */ /* Header for Nicira vendor requests and replies. */ @@ -161,12 +103,25 @@ enum nicira_type { /* Use the upper 8 bits of the 'command' member in struct ofp_flow_mod to * designate the table to which a flow is to be added? See the big comment - * on struct nxt_flow_mod_table_id for more information. */ + * on struct nx_flow_mod_table_id for more information. */ NXT_FLOW_MOD_TABLE_ID = 15, /* Alternative PACKET_IN message formats. */ NXT_SET_PACKET_IN_FORMAT = 16, /* Set Packet In format. */ - NXT_PACKET_IN = 17 /* Nicira Packet In. */ + NXT_PACKET_IN = 17, /* Nicira Packet In. */ + + /* Are the idle_age and hard_age members in struct nx_flow_stats supported? + * If so, the switch does not reply to this message (which consists only of + * a "struct nicira_header"). If not, the switch sends an error reply. */ + NXT_FLOW_AGE = 18, + + NXT_SET_ASYNC_CONFIG = 19, /* struct nx_async_config. */ + NXT_SET_CONTROLLER_ID = 20, /* struct nx_controller_id. */ + + /* Flow table monitoring (see also NXST_FLOW_MONITOR). */ + NXT_FLOW_MONITOR_CANCEL = 21, /* struct nx_flow_monitor_cancel. */ + NXT_FLOW_MONITOR_PAUSED = 22, /* struct nicira_header. */ + NXT_FLOW_MONITOR_RESUMED = 23, /* struct nicira_header. */ }; /* Header for Nicira vendor stats request and reply messages. */ @@ -181,7 +136,10 @@ OFP_ASSERT(sizeof(struct nicira_stats_msg) == 24); enum nicira_stats_type { /* Flexible flow specification (aka NXM = Nicira Extended Match). */ NXST_FLOW, /* Analogous to OFPST_FLOW. */ - NXST_AGGREGATE /* Analogous to OFPST_AGGREGATE. */ + NXST_AGGREGATE, /* Analogous to OFPST_AGGREGATE. */ + + /* Flow table monitoring. */ + NXST_FLOW_MONITOR, }; /* Fields to use when hashing flows. */ @@ -241,14 +199,14 @@ enum nx_hash_fields { * matches, then it is modified or deleted; if flows in more than one * table match, then none is modified or deleted. */ -struct nxt_flow_mod_table_id { +struct nx_flow_mod_table_id { struct ofp_header header; - uint32_t vendor; /* NX_VENDOR_ID. */ - uint32_t subtype; /* NXT_FLOW_MOD_TABLE_ID. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be32 subtype; /* NXT_FLOW_MOD_TABLE_ID. */ uint8_t set; /* Nonzero to enable, zero to disable. */ uint8_t pad[7]; }; -OFP_ASSERT(sizeof(struct nxt_flow_mod_table_id) == 24); +OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 24); enum nx_packet_in_format { NXPIF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */ @@ -256,11 +214,11 @@ enum nx_packet_in_format { }; /* NXT_SET_PACKET_IN_FORMAT request. */ -struct nxt_set_packet_in_format { +struct nx_set_packet_in_format { struct nicira_header nxh; ovs_be32 format; /* One of NXPIF_*. */ }; -OFP_ASSERT(sizeof(struct nxt_set_packet_in_format) == 20); +OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 20); /* NXT_PACKET_IN (analogous to OFPT_PACKET_IN). * @@ -286,7 +244,7 @@ OFP_ASSERT(sizeof(struct nxt_set_packet_in_format) == 20); * * The 'cookie' and 'table_id' fields have no meaning when 'reason' is * OFPR_NO_MATCH. In this case they should be set to 0. */ -struct nxt_packet_in { +struct nx_packet_in { struct nicira_header nxh; ovs_be32 buffer_id; /* ID assigned by datapath. */ ovs_be16 total_len; /* Full length of frame. */ @@ -309,7 +267,7 @@ struct nxt_packet_in { /* uint8_t pad[2]; */ /* Align to 64 bit + 16 bit. */ /* uint8_t data[0]; */ /* Ethernet frame. */ }; -OFP_ASSERT(sizeof(struct nxt_packet_in) == 40); +OFP_ASSERT(sizeof(struct nx_packet_in) == 40); /* Configures the "role" of the sending controller. The default role is: * @@ -334,12 +292,38 @@ struct nx_role_request { struct nicira_header nxh; ovs_be32 role; /* One of NX_ROLE_*. */ }; +OFP_ASSERT(sizeof(struct nx_role_request) == 20); enum nx_role { NX_ROLE_OTHER, /* Default role, full access. */ NX_ROLE_MASTER, /* Full access, at most one. */ NX_ROLE_SLAVE /* Read-only access. */ }; + +/* NXT_SET_ASYNC_CONFIG. + * + * Sent by a controller, this message configures the asynchronous messages that + * the controller wants to receive. Element 0 in each array specifies messages + * of interest when the controller has an "other" or "master" role; element 1, + * when the controller has a "slave" role. + * + * Each array element is a bitmask in which a 0-bit disables receiving a + * particular message and a 1-bit enables receiving it. Each bit controls the + * message whose 'reason' corresponds to the bit index. For example, the bit + * with value 1<<2 == 4 in port_status_mask[1] determines whether the + * controller will receive OFPT_PORT_STATUS messages with reason OFPPR_MODIFY + * (value 2) when the controller has a "slave" role. + * + * As a side effect, for service controllers, this message changes the + * miss_send_len from default of zero to OFP_DEFAULT_MISS_SEND_LEN (128). + */ +struct nx_async_config { + struct nicira_header nxh; + ovs_be32 packet_in_mask[2]; /* Bitmasks of OFPR_* values. */ + ovs_be32 port_status_mask[2]; /* Bitmasks of OFPRR_* values. */ + ovs_be32 flow_removed_mask[2]; /* Bitmasks of OFPPR_* values. */ +}; +OFP_ASSERT(sizeof(struct nx_async_config) == 40); /* Nicira vendor flow actions. */ @@ -361,7 +345,10 @@ enum nx_action_subtype { NXAST_RESUBMIT_TABLE, /* struct nx_action_resubmit */ NXAST_OUTPUT_REG, /* struct nx_action_output_reg */ NXAST_LEARN, /* struct nx_action_learn */ - NXAST_EXIT /* struct nx_action_header */ + NXAST_EXIT, /* struct nx_action_header */ + NXAST_DEC_TTL, /* struct nx_action_header */ + NXAST_FIN_TIMEOUT, /* struct nx_action_fin_timeout */ + NXAST_CONTROLLER, /* struct nx_action_controller */ }; /* Header for Nicira-defined actions. */ @@ -450,7 +437,7 @@ OFP_ASSERT(sizeof(struct nx_action_set_tunnel) == 16); * Sets the encapsulating tunnel ID to a 64-bit value. */ struct nx_action_set_tunnel64 { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 16. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_SET_TUNNEL64. */ uint8_t pad[6]; @@ -564,7 +551,7 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); */ struct nx_action_reg_move { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 16. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_REG_MOVE. */ ovs_be16 n_bits; /* Number of bits. */ @@ -603,7 +590,7 @@ OFP_ASSERT(sizeof(struct nx_action_reg_move) == 24); */ struct nx_action_reg_load { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 16. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_REG_LOAD. */ ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ @@ -811,6 +798,9 @@ enum nx_mp_algorithm { * field[ofs:ofs+n_bits-1]. Actions are executed in the same order as the * flow_mod_specs. * + * A single NXAST_REG_LOAD action writes no more than 64 bits, so n_bits + * greater than 64 yields multiple NXAST_REG_LOAD actions. + * * The flow_mod_spec destination spec for 'dst' of 2 (when 'src' is 0) is * empty. It has the following meaning: * @@ -829,6 +819,13 @@ enum nx_mp_algorithm { * prepared to handle this by flooding (which can be implemented as a * low-priority flow). * + * If a learned flow matches a single TCP stream with a relatively long + * timeout, one may make the best of resource constraints by setting + * 'fin_idle_timeout' or 'fin_hard_timeout' (both measured in seconds), or + * both, to shorter timeouts. When either of these is specified as a nonzero + * value, OVS adds a NXAST_FIN_TIMEOUT action, with the specified timeouts, to + * the learned flow. + * * Examples * -------- * @@ -932,7 +929,9 @@ struct nx_action_learn { ovs_be64 cookie; /* Cookie for new flow. */ ovs_be16 flags; /* Either 0 or OFPFF_SEND_FLOW_REM. */ uint8_t table_id; /* Table to insert flow entry. */ - uint8_t pad[5]; /* Must be zero. */ + uint8_t pad; /* Must be zero. */ + ovs_be16 fin_idle_timeout; /* Idle timeout after FIN, if nonzero. */ + ovs_be16 fin_hard_timeout; /* Hard timeout after FIN, if nonzero. */ /* Followed by a sequence of flow_mod_spec elements, as described above, * until the end of the action is reached. */ }; @@ -949,6 +948,40 @@ OFP_ASSERT(sizeof(struct nx_action_learn) == 32); #define NX_LEARN_DST_OUTPUT (2 << 11) /* Add OFPAT_OUTPUT action. */ #define NX_LEARN_DST_RESERVED (3 << 11) /* Not yet defined. */ #define NX_LEARN_DST_MASK (3 << 11) + +/* Action structure for NXAST_FIN_TIMEOUT. + * + * This action changes the idle timeout or hard timeout, or both, of this + * OpenFlow rule when the rule matches a TCP packet with the FIN or RST flag. + * When such a packet is observed, the action reduces the rule's idle timeout + * to 'fin_idle_timeout' and its hard timeout to 'fin_hard_timeout'. This + * action has no effect on an existing timeout that is already shorter than the + * one that the action specifies. A 'fin_idle_timeout' or 'fin_hard_timeout' + * of zero has no effect on the respective timeout. + * + * 'fin_idle_timeout' and 'fin_hard_timeout' are measured in seconds. + * 'fin_hard_timeout' specifies time since the flow's creation, not since the + * receipt of the FIN or RST. + * + * This is useful for quickly discarding learned TCP flows that otherwise will + * take a long time to expire. + * + * This action is intended for use with an OpenFlow rule that matches only a + * single TCP flow. If the rule matches multiple TCP flows (e.g. it wildcards + * all TCP traffic, or all TCP traffic to a particular port), then any FIN or + * RST in any of those flows will cause the entire OpenFlow rule to expire + * early, which is not normally desirable. + */ +struct nx_action_fin_timeout { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_FIN_TIMEOUT. */ + ovs_be16 fin_idle_timeout; /* New idle timeout, if nonzero. */ + ovs_be16 fin_hard_timeout; /* New hard timeout, if nonzero. */ + ovs_be16 pad; /* Must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_fin_timeout) == 16); /* Action structure for NXAST_AUTOPATH. * @@ -981,7 +1014,7 @@ OFP_ASSERT(sizeof(struct nx_action_learn) == 32); */ struct nx_action_autopath { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 20. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_AUTOPATH. */ @@ -1127,11 +1160,11 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); /* Flexible flow specifications (aka NXM = Nicira Extended Match). * - * OpenFlow 1.0 has "struct ofp_match" for specifying flow matches. This + * OpenFlow 1.0 has "struct ofp10_match" for specifying flow matches. This * structure is fixed-length and hence difficult to extend. This section * describes a more flexible, variable-length flow match, called "nx_match" for * short, that is also supported by Open vSwitch. This section also defines a - * replacement for each OpenFlow message that includes struct ofp_match. + * replacement for each OpenFlow message that includes struct ofp10_match. * * * Format @@ -1189,7 +1222,7 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * matches bit J in nxm_value. A 0-bit in nxm_mask causes the * corresponding bits in nxm_value and the field's value to be ignored. * (The sense of the nxm_mask bits is the opposite of that used by the - * "wildcards" member of struct ofp_match.) + * "wildcards" member of struct ofp10_match.) * * When nxm_hasmask is 1, nxm_length is always even. * @@ -1346,13 +1379,13 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 48-bit Ethernet MAC address. * - * Masking: The nxm_mask patterns 01:00:00:00:00:00 and FE:FF:FF:FF:FF:FF must - * be supported for NXM_OF_ETH_DST_W (as well as the trivial patterns that - * are all-0-bits or all-1-bits). Support for other patterns and for masking - * of NXM_OF_ETH_SRC is optional. */ + * Masking: Fully maskable, in versions 1.8 and later. Earlier versions only + * supported the following masks for NXM_OF_ETH_DST_W: 00:00:00:00:00:00, + * fe:ff:ff:ff:ff:ff, 01:00:00:00:00:00, ff:ff:ff:ff:ff:ff. */ #define NXM_OF_ETH_DST NXM_HEADER (0x0000, 1, 6) #define NXM_OF_ETH_DST_W NXM_HEADER_W(0x0000, 1, 6) #define NXM_OF_ETH_SRC NXM_HEADER (0x0000, 2, 6) +#define NXM_OF_ETH_SRC_W NXM_HEADER_W(0x0000, 2, 6) /* Packet's Ethernet type. * @@ -1439,7 +1472,8 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 32-bit integer in network byte order. * - * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier + * versions, only CIDR masks are allowed, that is, masks that consist of N * high-order bits set to 1 and the other 32-N bits set to 0. */ #define NXM_OF_IP_SRC NXM_HEADER (0x0000, 7, 4) #define NXM_OF_IP_SRC_W NXM_HEADER_W(0x0000, 7, 4) @@ -1454,9 +1488,12 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 16-bit integer in network byte order. * - * Masking: Not maskable. */ + * Masking: Fully maskable, in Open vSwitch 1.6 and later. Not maskable, in + * earlier versions. */ #define NXM_OF_TCP_SRC NXM_HEADER (0x0000, 9, 2) +#define NXM_OF_TCP_SRC_W NXM_HEADER_W(0x0000, 9, 2) #define NXM_OF_TCP_DST NXM_HEADER (0x0000, 10, 2) +#define NXM_OF_TCP_DST_W NXM_HEADER_W(0x0000, 10, 2) /* The source or destination port in the UDP header. * @@ -1466,9 +1503,12 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 16-bit integer in network byte order. * - * Masking: Not maskable. */ + * Masking: Fully maskable, in Open vSwitch 1.6 and later. Not maskable, in + * earlier versions. */ #define NXM_OF_UDP_SRC NXM_HEADER (0x0000, 11, 2) +#define NXM_OF_UDP_SRC_W NXM_HEADER_W(0x0000, 11, 2) #define NXM_OF_UDP_DST NXM_HEADER (0x0000, 12, 2) +#define NXM_OF_UDP_DST_W NXM_HEADER_W(0x0000, 12, 2) /* The type or code in the ICMP header. * @@ -1502,7 +1542,8 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 32-bit integer in network byte order. * - * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier + * versions, only CIDR masks are allowed, that is, masks that consist of N * high-order bits set to 1 and the other 32-N bits set to 0. */ #define NXM_OF_ARP_SPA NXM_HEADER (0x0000, 16, 4) #define NXM_OF_ARP_SPA_W NXM_HEADER_W(0x0000, 16, 4) @@ -1540,6 +1581,12 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); #define NXM_NX_REG3_W NXM_HEADER_W(0x0001, 3, 4) #define NXM_NX_REG4 NXM_HEADER (0x0001, 4, 4) #define NXM_NX_REG4_W NXM_HEADER_W(0x0001, 4, 4) +#define NXM_NX_REG5 NXM_HEADER (0x0001, 5, 4) +#define NXM_NX_REG5_W NXM_HEADER_W(0x0001, 5, 4) +#define NXM_NX_REG6 NXM_HEADER (0x0001, 6, 4) +#define NXM_NX_REG6_W NXM_HEADER_W(0x0001, 6, 4) +#define NXM_NX_REG7 NXM_HEADER (0x0001, 7, 4) +#define NXM_NX_REG7_W NXM_HEADER_W(0x0001, 7, 4) /* Tunnel ID. * @@ -1572,7 +1619,8 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 128-bit IPv6 address. * - * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous + * versions, only CIDR masks are allowed, that is, masks that consist of N * high-order bits set to 1 and the other 128-N bits set to 0. */ #define NXM_NX_IPV6_SRC NXM_HEADER (0x0001, 19, 16) #define NXM_NX_IPV6_SRC_W NXM_HEADER_W(0x0001, 19, 16) @@ -1600,8 +1648,11 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); * * Format: 128-bit IPv6 address. * - * Masking: Not maskable. */ -#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16) + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous + * versions, only CIDR masks are allowed, that is, masks that consist of N + * high-order bits set to 1 and the other 128-N bits set to 0. */ +#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16) +#define NXM_NX_ND_TARGET_W NXM_HEADER_W (0x0001, 23, 16) /* The source link-layer address option in an IPv6 Neighbor Discovery * message. @@ -1728,25 +1779,22 @@ OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); enum nx_flow_format { NXFF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */ - NXFF_NXM = 2 /* Nicira extended match. */ + NXFF_NXM = 2, /* Nicira extended match. */ + NXFF_OPENFLOW12 = 3 /* OpenFlow 1.2 format. */ }; /* NXT_SET_FLOW_FORMAT request. */ -struct nxt_set_flow_format { - struct ofp_header header; - ovs_be32 vendor; /* NX_VENDOR_ID. */ - ovs_be32 subtype; /* NXT_SET_FLOW_FORMAT. */ +struct nx_set_flow_format { + struct nicira_header nxh; ovs_be32 format; /* One of NXFF_*. */ }; -OFP_ASSERT(sizeof(struct nxt_set_flow_format) == 20); +OFP_ASSERT(sizeof(struct nx_set_flow_format) == 20); /* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD). * * It is possible to limit flow deletions and modifications to certain - * cookies by using the NXM_NX_COOKIE and NXM_NX_COOKIE_W matches. For - * these commands, the "cookie" field is always ignored. Flow additions - * make use of the "cookie" field and ignore any NXM_NX_COOKIE* - * definitions. + * cookies by using the NXM_NX_COOKIE(_W) matches. The "cookie" field + * is used only to add or modify flow cookies. */ struct nx_flow_mod { struct nicira_header nxh; @@ -1820,7 +1868,27 @@ struct nx_flow_stats_request { OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 32); /* Body for Nicira vendor stats reply of type NXST_FLOW (analogous to - * OFPST_FLOW reply). */ + * OFPST_FLOW reply). + * + * The values of 'idle_age' and 'hard_age' are only meaningful when talking to + * a switch that implements the NXT_FLOW_AGE extension. Zero means that the + * true value is unknown, perhaps because hardware does not track the value. + * (Zero is also the value that one should ordinarily expect to see talking to + * a switch that does not implement NXT_FLOW_AGE, since those switches zero the + * padding bytes that these fields replaced.) A nonzero value X represents X-1 + * seconds. A value of 65535 represents 65534 or more seconds. + * + * 'idle_age' is the number of seconds that the flow has been idle, that is, + * the number of seconds since a packet passed through the flow. 'hard_age' is + * the number of seconds since the flow was last modified (e.g. OFPFC_MODIFY or + * OFPFC_MODIFY_STRICT). (The 'duration_*' fields are the elapsed time since + * the flow was added, regardless of subsequent modifications.) + * + * For a flow with an idle or hard timeout, 'idle_age' or 'hard_age', + * respectively, will ordinarily be smaller than the timeout, but flow + * expiration times are only approximate and so one must be prepared to + * tolerate expirations that occur somewhat early or late. + */ struct nx_flow_stats { ovs_be16 length; /* Length of this entry. */ uint8_t table_id; /* ID of table flow came from. */ @@ -1828,12 +1896,12 @@ struct nx_flow_stats { ovs_be32 duration_sec; /* Time flow has been alive in seconds. */ ovs_be32 duration_nsec; /* Time flow has been alive in nanoseconds beyond duration_sec. */ - ovs_be16 priority; /* Priority of the entry. Only meaningful - when this is not an exact-match entry. */ + ovs_be16 priority; /* Priority of the entry. */ ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */ ovs_be16 hard_timeout; /* Number of seconds before expiration. */ ovs_be16 match_len; /* Length of nx_match. */ - uint8_t pad2[4]; /* Align to 64 bits. */ + ovs_be16 idle_age; /* Seconds since last packet, plus one. */ + ovs_be16 hard_age; /* Seconds since last modification, plus one. */ ovs_be64 cookie; /* Opaque controller-issued identifier. */ ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */ ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */ @@ -1877,5 +1945,280 @@ struct nx_aggregate_stats_reply { uint8_t pad[4]; /* Align to 64 bits. */ }; OFP_ASSERT(sizeof(struct nx_aggregate_stats_reply) == 48); + +/* NXT_SET_CONTROLLER_ID. + * + * Each OpenFlow controller connection has a 16-bit identifier that is + * initially 0. This message changes the connection's ID to 'id'. + * + * Controller connection IDs need not be unique. + * + * The NXAST_CONTROLLER action is the only current user of controller + * connection IDs. */ +struct nx_controller_id { + struct nicira_header nxh; + uint8_t zero[6]; /* Must be zero. */ + ovs_be16 controller_id; /* New controller connection ID. */ +}; +OFP_ASSERT(sizeof(struct nx_controller_id) == 24); + +/* Action structure for NXAST_CONTROLLER. + * + * This generalizes using OFPAT_OUTPUT to send a packet to OFPP_CONTROLLER. In + * addition to the 'max_len' that OFPAT_OUTPUT supports, it also allows + * specifying: + * + * - 'reason': The reason code to use in the ofp_packet_in or nx_packet_in. + * + * - 'controller_id': The ID of the controller connection to which the + * ofp_packet_in should be sent. The ofp_packet_in or nx_packet_in is + * sent only to controllers that have the specified controller connection + * ID. See "struct nx_controller_id" for more information. */ +struct nx_action_controller { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_CONTROLLER. */ + ovs_be16 max_len; /* Maximum length to send to controller. */ + ovs_be16 controller_id; /* Controller ID to send packet-in. */ + uint8_t reason; /* enum ofp_packet_in_reason (OFPR_*). */ + uint8_t zero; /* Must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_controller) == 16); + +/* Flow Table Monitoring + * ===================== + * + * NXST_FLOW_MONITOR allows a controller to keep track of changes to OpenFlow + * flow table(s) or subsets of them, with the following workflow: + * + * 1. The controller sends an NXST_FLOW_MONITOR request to begin monitoring + * flows. The 'id' in the request must be unique among all monitors that + * the controller has started and not yet canceled on this OpenFlow + * connection. + * + * 2. The switch responds with an NXST_FLOW_MONITOR reply. If the request's + * 'flags' included NXFMF_INITIAL, the reply includes all the flows that + * matched the request at the time of the request (with event NXFME_ADDED). + * If 'flags' did not include NXFMF_INITIAL, the reply is empty. + * + * The reply uses the xid of the request (as do all replies to OpenFlow + * requests). + * + * 3. Whenever a change to a flow table entry matches some outstanding monitor + * request's criteria and flags, the switch sends a notification to the + * controller as an additional NXST_FLOW_MONITOR reply with xid 0. + * + * When multiple outstanding monitors match a single change, only a single + * notification is sent. This merged notification includes the information + * requested in any of the individual monitors. That is, if any of the + * matching monitors requests actions (NXFMF_ACTIONS), the notification + * includes actions, and if any of the monitors request full changes for the + * controller's own changes (NXFMF_OWN), the controller's own changes will + * be included in full. + * + * 4. The controller may cancel a monitor with NXT_FLOW_MONITOR_CANCEL. No + * further notifications will be sent on the basis of the canceled monitor + * afterward. + * + * + * Buffer Management + * ================= + * + * OpenFlow messages for flow monitor notifications can overflow the buffer + * space available to the switch, either temporarily (e.g. due to network + * conditions slowing OpenFlow traffic) or more permanently (e.g. the sustained + * rate of flow table change exceeds the network bandwidth between switch and + * controller). + * + * When Open vSwitch's notification buffer space reaches a limiting threshold, + * OVS reacts as follows: + * + * 1. OVS sends an NXT_FLOW_MONITOR_PAUSED message to the controller, following + * all the already queued notifications. After it receives this message, + * the controller knows that its view of the flow table, as represented by + * flow monitor notifications, is incomplete. + * + * 2. As long as the notification buffer is not empty: + * + * - NXMFE_ADD and NXFME_MODIFIED notifications will not be sent. + * + * - NXFME_DELETED notifications will still be sent, but only for flows + * that existed before OVS sent NXT_FLOW_MONITOR_PAUSED. + * + * - NXFME_ABBREV notifications will not be sent. They are treated as + * the expanded version (and therefore only the NXFME_DELETED + * components, if any, are sent). + * + * 3. When the notification buffer empties, OVS sends NXFME_ADD notifications + * for flows added since the buffer reached its limit and NXFME_MODIFIED + * notifications for flows that existed before the limit was reached and + * changed after the limit was reached. + * + * 4. OVS sends an NXT_FLOW_MONITOR_RESUMED message to the controller. After + * it receives this message, the controller knows that its view of the flow + * table, as represented by flow monitor notifications, is again complete. + * + * This allows the maximum buffer space requirement for notifications to be + * bounded by the limit plus the maximum number of supported flows. + * + * + * "Flow Removed" messages + * ======================= + * + * The flow monitor mechanism is independent of OFPT_FLOW_REMOVED and + * NXT_FLOW_REMOVED. Flow monitor updates for deletion are sent if + * NXFMF_DELETE is set on a monitor, regardless of whether the + * OFPFF_SEND_FLOW_REM flag was set when the flow was added. */ + +/* NXST_FLOW_MONITOR request. + * + * The NXST_FLOW_MONITOR request's body consists of an array of zero or more + * instances of this structure. The request arranges to monitor the flows + * that match the specified criteria, which are interpreted in the same way as + * for NXST_FLOW. + * + * 'id' identifies a particular monitor for the purpose of allowing it to be + * canceled later with NXT_FLOW_MONITOR_CANCEL. 'id' must be unique among + * existing monitors that have not already been canceled. + * + * The reply includes the initial flow matches for monitors that have the + * NXFMF_INITIAL flag set. No single flow will be included in the reply more + * than once, even if more than one requested monitor matches that flow. The + * reply will be empty if none of the monitors has NXFMF_INITIAL set or if none + * of the monitors initially matches any flows. + * + * For NXFMF_ADD, an event will be reported if 'out_port' matches against the + * actions of the flow being added or, for a flow that is replacing an existing + * flow, if 'out_port' matches against the actions of the flow being replaced. + * For NXFMF_DELETE, 'out_port' matches against the actions of a flow being + * deleted. For NXFMF_MODIFY, an event will be reported if 'out_port' matches + * either the old or the new actions. */ +struct nx_flow_monitor_request { + ovs_be32 id; /* Controller-assigned ID for this monitor. */ + ovs_be16 flags; /* NXFMF_*. */ + ovs_be16 out_port; /* Required output port, if not OFPP_NONE. */ + ovs_be16 match_len; /* Length of nx_match. */ + uint8_t table_id; /* One table's ID or 0xff for all tables. */ + uint8_t zeros[5]; /* Align to 64 bits (must be zero). */ + /* Followed by: + * - Exactly match_len (possibly 0) bytes containing the nx_match, then + * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of + * all-zero bytes. */ +}; +OFP_ASSERT(sizeof(struct nx_flow_monitor_request) == 16); + +/* 'flags' bits in struct nx_flow_monitor_request. */ +enum nx_flow_monitor_flags { + /* When to send updates. */ + NXFMF_INITIAL = 1 << 0, /* Initially matching flows. */ + NXFMF_ADD = 1 << 1, /* New matching flows as they are added. */ + NXFMF_DELETE = 1 << 2, /* Old matching flows as they are removed. */ + NXFMF_MODIFY = 1 << 3, /* Matching flows as they are changed. */ + + /* What to include in updates. */ + NXFMF_ACTIONS = 1 << 4, /* If set, actions are included. */ + NXFMF_OWN = 1 << 5, /* If set, include own changes in full. */ +}; + +/* NXST_FLOW_MONITOR reply header. + * + * The body of an NXST_FLOW_MONITOR reply is an array of variable-length + * structures, each of which begins with this header. The 'length' member may + * be used to traverse the array, and the 'event' member may be used to + * determine the particular structure. + * + * Every instance is a multiple of 8 bytes long. */ +struct nx_flow_update_header { + ovs_be16 length; /* Length of this entry. */ + ovs_be16 event; /* One of NXFME_*. */ + /* ...other data depending on 'event'... */ +}; +OFP_ASSERT(sizeof(struct nx_flow_update_header) == 4); + +/* 'event' values in struct nx_flow_update_header. */ +enum nx_flow_update_event { + /* struct nx_flow_update_full. */ + NXFME_ADDED = 0, /* Flow was added. */ + NXFME_DELETED = 1, /* Flow was deleted. */ + NXFME_MODIFIED = 2, /* Flow (generally its actions) was changed. */ + + /* struct nx_flow_update_abbrev. */ + NXFME_ABBREV = 3, /* Abbreviated reply. */ +}; + +/* NXST_FLOW_MONITOR reply for NXFME_ADDED, NXFME_DELETED, and + * NXFME_MODIFIED. */ +struct nx_flow_update_full { + ovs_be16 length; /* Length is 24. */ + ovs_be16 event; /* One of NXFME_*. */ + ovs_be16 reason; /* OFPRR_* for NXFME_DELETED, else zero. */ + ovs_be16 priority; /* Priority of the entry. */ + ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */ + ovs_be16 hard_timeout; /* Number of seconds before expiration. */ + ovs_be16 match_len; /* Length of nx_match. */ + uint8_t table_id; /* ID of flow's table. */ + uint8_t pad; /* Reserved, currently zeroed. */ + ovs_be64 cookie; /* Opaque controller-issued identifier. */ + /* Followed by: + * - Exactly match_len (possibly 0) bytes containing the nx_match, then + * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of + * all-zero bytes, then + * - Actions to fill out the remainder 'length' bytes (always a multiple + * of 8). If NXFMF_ACTIONS was not specified, or 'event' is + * NXFME_DELETED, no actions are included. + */ +}; +OFP_ASSERT(sizeof(struct nx_flow_update_full) == 24); + +/* NXST_FLOW_MONITOR reply for NXFME_ABBREV. + * + * When the controller does not specify NXFMF_OWN in a monitor request, any + * flow tables changes due to the controller's own requests (on the same + * OpenFlow channel) will be abbreviated, when possible, to this form, which + * simply specifies the 'xid' of the OpenFlow request (e.g. an OFPT_FLOW_MOD or + * NXT_FLOW_MOD) that caused the change. + * + * Some changes cannot be abbreviated and will be sent in full: + * + * - Changes that only partially succeed. This can happen if, for example, + * a flow_mod with type OFPFC_MODIFY affects multiple flows, but only some + * of those modifications succeed (e.g. due to hardware limitations). + * + * This cannot occur with the current implementation of the Open vSwitch + * software datapath. It could happen with other datapath implementations. + * + * - Changes that race with conflicting changes made by other controllers or + * other flow_mods (not separated by barriers) by the same controller. + * + * This cannot occur with the current Open vSwitch implementation + * (regardless of datapath) because Open vSwitch internally serializes + * potentially conflicting changes. + * + * A flow_mod that does not change the flow table will not trigger any + * notification, even an abbreviated one. For example, a "modify" or "delete" + * flow_mod that does not match any flows will not trigger a notification. + * Whether an "add" or "modify" that specifies all the same parameters that a + * flow already has triggers a notification is unspecified and subject to + * change in future versions of Open vSwitch. + * + * OVS will always send the notifications for a given flow table change before + * the reply to a OFPT_BARRIER_REQUEST request that precedes the flow table + * change. Thus, if the controller does not receive an abbreviated + * notification for a flow_mod before the next OFPT_BARRIER_REPLY, it will + * never receive one. */ +struct nx_flow_update_abbrev { + ovs_be16 length; /* Length is 8. */ + ovs_be16 event; /* NXFME_ABBREV. */ + ovs_be32 xid; /* Controller-specified xid from flow_mod. */ +}; +OFP_ASSERT(sizeof(struct nx_flow_update_abbrev) == 8); + +/* Used by a controller to cancel an outstanding monitor. */ +struct nx_flow_monitor_cancel { + struct nicira_header nxh; /* Type NXT_FLOW_MONITOR_CANCEL. */ + ovs_be32 id; /* 'id' from nx_flow_monitor_request. */ +}; +OFP_ASSERT(sizeof(struct nx_flow_monitor_cancel) == 20); #endif /* openflow/nicira-ext.h */