X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fopenflow%2Fnicira-ext.h;h=b66b806ed6f47121461cbbed8639bb249b536255;hb=a7349929fb86d41f2e2ef77395e33b21f9457d48;hp=a08ae14af2f46574655e7881d04d41abf2c0103f;hpb=09246b99d1601e2ba7ff85bb26f9b0235632a76d;p=sliver-openvswitch.git diff --git a/include/openflow/nicira-ext.h b/include/openflow/nicira-ext.h index a08ae14af..b66b806ed 100644 --- a/include/openflow/nicira-ext.h +++ b/include/openflow/nicira-ext.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008, 2009, 2010 Nicira Networks + * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira Networks * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -20,8 +20,6 @@ #include "openflow/openflow.h" #include "openvswitch/types.h" -#define NICIRA_OUI_STR "002320" - /* The following vendor extensions, proposed by Nicira Networks, are not yet * standardized, so they are not included in openflow.h. Some of them may be * suitable for standardization; others we never expect to standardize. */ @@ -38,7 +36,7 @@ * * This extension attempts to address the problem by adding a generic "error * vendor extension". The extension works as follows: use NXET_VENDOR as type - * and NXVC_VENDOR_CODE as code, followed by struct nx_vendor_error with + * and NXVC_VENDOR_ERROR as code, followed by struct nx_vendor_error with * vendor-specific details, followed by at least 64 bytes of the failed * request. * @@ -69,53 +67,6 @@ struct nx_vendor_error { /* Followed by at least the first 64 bytes of the failed request. */ }; -/* Specific Nicira extension error numbers. - * - * These are the "code" values used in nx_vendor_error. So far, the "type" - * values in nx_vendor_error are the same as those in ofp_error_msg. That is, - * at Nicira so far we've only needed additional vendor-specific 'code' values, - * so we're using the existing 'type' values to avoid having to invent new ones - * that duplicate the current ones' meanings. */ - -/* Additional "code" values for OFPET_BAD_REQUEST. */ -enum { -/* Nicira Extended Match (NXM) errors. */ - - /* Generic error code used when there is an error in an NXM sent to the - * switch. The switch may use one of the more specific error codes below, - * if there is an appropriate one, to simplify debugging, but it is not - * required to do so. */ - NXBRC_NXM_INVALID = 0x100, - - /* The nxm_type, or nxm_type taken in combination with nxm_hasmask or - * nxm_length or both, is invalid or not implemented. */ - NXBRC_NXM_BAD_TYPE = 0x101, - - /* Invalid nxm_value. */ - NXBRC_NXM_BAD_VALUE = 0x102, - - /* Invalid nxm_mask. */ - NXBRC_NXM_BAD_MASK = 0x103, - - /* A prerequisite was not met. */ - NXBRC_NXM_BAD_PREREQ = 0x104, - - /* A given nxm_type was specified more than once. */ - NXBRC_NXM_DUP_TYPE = 0x105 -}; - -/* Additional "code" values for OFPET_FLOW_MOD_FAILED. */ -enum { - /* Generic hardware error. */ - NXFMFC_HARDWARE = 0x100, - - /* A nonexistent table ID was specified in the "command" field of struct - * ofp_flow_mod, when the nxt_flow_mod_table_id extension is enabled. - * (This extension is not yet implemented on this branch of Open - * vSwitch.) */ - NXFMFC_BAD_TABLE_ID = 0x101 -}; - /* Nicira vendor requests and replies. */ /* Header for Nicira vendor requests and replies. */ @@ -128,45 +79,49 @@ OFP_ASSERT(sizeof(struct nicira_header) == 16); /* Values for the 'subtype' member of struct nicira_header. */ enum nicira_type { - /* Switch status request. The request body is an ASCII string that - * specifies a prefix of the key names to include in the output; if it is - * the null string, then all key-value pairs are included. */ - NXT_STATUS_REQUEST, - - /* Switch status reply. The reply body is an ASCII string of key-value - * pairs in the form "key=value\n". */ - NXT_STATUS_REPLY, - /* No longer used. */ - NXT_ACT_SET_CONFIG__OBSOLETE, - NXT_ACT_GET_CONFIG__OBSOLETE, - NXT_COMMAND_REQUEST__OBSOLETE, - NXT_COMMAND_REPLY__OBSOLETE, - NXT_FLOW_END_CONFIG__OBSOLETE, - NXT_FLOW_END__OBSOLETE, - NXT_MGMT__OBSOLETE, - - /* Use the high 32 bits of the cookie field as the tunnel ID in the flow - * match. */ - NXT_TUN_ID_FROM_COOKIE, + NXT_STATUS_REQUEST__OBSOLETE = 0, + NXT_STATUS_REPLY__OBSOLETE = 1, + NXT_ACT_SET_CONFIG__OBSOLETE = 2, + NXT_ACT_GET_CONFIG__OBSOLETE = 3, + NXT_COMMAND_REQUEST__OBSOLETE = 4, + NXT_COMMAND_REPLY__OBSOLETE = 5, + NXT_FLOW_END_CONFIG__OBSOLETE = 6, + NXT_FLOW_END__OBSOLETE = 7, + NXT_MGMT__OBSOLETE = 8, + NXT_TUN_ID_FROM_COOKIE__OBSOLETE = 9, /* Controller role support. The request body is struct nx_role_request. * The reply echos the request. */ - NXT_ROLE_REQUEST, - NXT_ROLE_REPLY, + NXT_ROLE_REQUEST = 10, + NXT_ROLE_REPLY = 11, /* Flexible flow specification (aka NXM = Nicira Extended Match). */ - NXT_SET_FLOW_FORMAT, /* Set flow format. */ - NXT_FLOW_MOD, /* Analogous to OFPT_FLOW_MOD. */ - NXT_FLOW_REMOVED /* Analogous to OFPT_FLOW_REMOVED. */ + NXT_SET_FLOW_FORMAT = 12, /* Set flow format. */ + NXT_FLOW_MOD = 13, /* Analogous to OFPT_FLOW_MOD. */ + NXT_FLOW_REMOVED = 14, /* Analogous to OFPT_FLOW_REMOVED. */ + + /* Use the upper 8 bits of the 'command' member in struct ofp_flow_mod to + * designate the table to which a flow is to be added? See the big comment + * on struct nx_flow_mod_table_id for more information. */ + NXT_FLOW_MOD_TABLE_ID = 15, + + /* Alternative PACKET_IN message formats. */ + NXT_SET_PACKET_IN_FORMAT = 16, /* Set Packet In format. */ + NXT_PACKET_IN = 17, /* Nicira Packet In. */ + + /* Are the idle_age and hard_age members in struct nx_flow_stats supported? + * If so, the switch does not reply to this message (which consists only of + * a "struct nicira_header"). If not, the switch sends an error reply. */ + NXT_FLOW_AGE = 18, + + NXT_SET_ASYNC_CONFIG = 19, /* struct nx_async_config. */ + NXT_SET_CONTROLLER_ID = 20, /* struct nx_controller_id. */ }; /* Header for Nicira vendor stats request and reply messages. */ struct nicira_stats_msg { - struct ofp_header header; /* OFPT_STATS_REQUEST or OFPT_STATS_REPLY. */ - ovs_be16 type; /* OFPST_VENDOR. */ - ovs_be16 flags; /* OFPSF_{REQ,REPLY}_*. */ - ovs_be32 vendor; /* NX_VENDOR_ID. */ + struct ofp_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */ ovs_be32 subtype; /* One of NXST_* below. */ uint8_t pad[4]; /* Align to 64-bits. */ }; @@ -179,15 +134,132 @@ enum nicira_stats_type { NXST_AGGREGATE /* Analogous to OFPST_AGGREGATE. */ }; -/* NXT_TUN_ID_FROM_COOKIE request. */ -struct nxt_tun_id_cookie { +/* Fields to use when hashing flows. */ +enum nx_hash_fields { + /* Ethernet source address (NXM_OF_ETH_SRC) only. */ + NX_HASH_FIELDS_ETH_SRC, + + /* L2 through L4, symmetric across src/dst. Specifically, each of the + * following fields, if present, is hashed (slashes separate symmetric + * pairs): + * + * - NXM_OF_ETH_DST / NXM_OF_ETH_SRC + * - NXM_OF_ETH_TYPE + * - The VID bits from NXM_OF_VLAN_TCI, ignoring PCP and CFI. + * - NXM_OF_IP_PROTO + * - NXM_OF_IP_SRC / NXM_OF_IP_DST + * - NXM_OF_TCP_SRC / NXM_OF_TCP_DST + */ + NX_HASH_FIELDS_SYMMETRIC_L4 +}; + +/* This command enables or disables an Open vSwitch extension that allows a + * controller to specify the OpenFlow table to which a flow should be added, + * instead of having the switch decide which table is most appropriate as + * required by OpenFlow 1.0. By default, the extension is disabled. + * + * When this feature is enabled, Open vSwitch treats struct ofp_flow_mod's + * 16-bit 'command' member as two separate fields. The upper 8 bits are used + * as the table ID, the lower 8 bits specify the command as usual. A table ID + * of 0xff is treated like a wildcarded table ID. + * + * The specific treatment of the table ID depends on the type of flow mod: + * + * - OFPFC_ADD: Given a specific table ID, the flow is always placed in that + * table. If an identical flow already exists in that table only, then it + * is replaced. If the flow cannot be placed in the specified table, + * either because the table is full or because the table cannot support + * flows of the given type, the switch replies with an + * OFPFMFC_ALL_TABLES_FULL error. (A controller can distinguish these + * cases by comparing the current and maximum number of entries reported + * in ofp_table_stats.) + * + * If the table ID is wildcarded, the switch picks an appropriate table + * itself. If an identical flow already exist in the selected flow table, + * then it is replaced. The choice of table might depend on the flows + * that are already in the switch; for example, if one table fills up then + * the switch might fall back to another one. + * + * - OFPFC_MODIFY, OFPFC_DELETE: Given a specific table ID, only flows + * within that table are matched and modified or deleted. If the table ID + * is wildcarded, flows within any table may be matched and modified or + * deleted. + * + * - OFPFC_MODIFY_STRICT, OFPFC_DELETE_STRICT: Given a specific table ID, + * only a flow within that table may be matched and modified or deleted. + * If the table ID is wildcarded and exactly one flow within any table + * matches, then it is modified or deleted; if flows in more than one + * table match, then none is modified or deleted. + */ +struct nx_flow_mod_table_id { struct ofp_header header; uint32_t vendor; /* NX_VENDOR_ID. */ - uint32_t subtype; /* NXT_TUN_ID_FROM_COOKIE */ + uint32_t subtype; /* NXT_FLOW_MOD_TABLE_ID. */ uint8_t set; /* Nonzero to enable, zero to disable. */ uint8_t pad[7]; }; -OFP_ASSERT(sizeof(struct nxt_tun_id_cookie) == 24); +OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 24); + +enum nx_packet_in_format { + NXPIF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */ + NXPIF_NXM = 1 /* Nicira Extended. */ +}; + +/* NXT_SET_PACKET_IN_FORMAT request. */ +struct nx_set_packet_in_format { + struct nicira_header nxh; + ovs_be32 format; /* One of NXPIF_*. */ +}; +OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 20); + +/* NXT_PACKET_IN (analogous to OFPT_PACKET_IN). + * + * The NXT_PACKET_IN format is intended to model the OpenFlow-1.2 PACKET_IN + * with some minor tweaks. Most notably NXT_PACKET_IN includes the cookie of + * the rule which triggered the NXT_PACKET_IN message, and the match fields are + * in NXM format. + * + * The match fields in the NXT_PACKET_IN are intended to contain flow + * processing metadata collected at the time the NXT_PACKET_IN message was + * triggered. It is minimally required to contain the NXM_OF_IN_PORT of the + * packet, but may include other NXM headers such as flow registers. The match + * fields are allowed to contain non-metadata (e.g. NXM_OF_ETH_SRC etc). + * However, this information can typically be found in the packet directly, so + * it may be redundant. + * + * Whereas in most cases a controller can expect to only get back NXM fields + * that it set up itself (e.g. flow dumps will ordinarily report only NXM + * fields from flows that the controller added), NXT_PACKET_IN messages might + * contain fields that the controller does not understand, because the switch + * might support fields (new registers, new protocols, etc.) that the + * controller does not.  The controller must prepared to tolerate these. + * + * The 'cookie' and 'table_id' fields have no meaning when 'reason' is + * OFPR_NO_MATCH. In this case they should be set to 0. */ +struct nx_packet_in { + struct nicira_header nxh; + ovs_be32 buffer_id; /* ID assigned by datapath. */ + ovs_be16 total_len; /* Full length of frame. */ + uint8_t reason; /* Reason packet is sent (one of OFPR_*). */ + uint8_t table_id; /* ID of the table that was looked up. */ + ovs_be64 cookie; /* Cookie of the rule that was looked up. */ + ovs_be16 match_len; /* Size of nx_match. */ + uint8_t pad[6]; /* Align to 64-bits. */ + /* Followed by: + * - Exactly match_len (possibly 0) bytes containing the nx_match, then + * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of + * all-zero bytes, then + * - Exactly 2 all-zero padding bytes, then + * - An Ethernet frame whose length is inferred from nxh.header.length. + * + * The padding bytes preceding the Ethernet frame ensure that the IP + * header (if any) following the Ethernet header is 32-bit aligned. */ + + /* uint8_t nxm_fields[...]; */ /* Match. */ + /* uint8_t pad[2]; */ /* Align to 64 bit + 16 bit. */ + /* uint8_t data[0]; */ /* Ethernet frame. */ +}; +OFP_ASSERT(sizeof(struct nx_packet_in) == 40); /* Configures the "role" of the sending controller. The default role is: * @@ -205,19 +277,42 @@ OFP_ASSERT(sizeof(struct nxt_tun_id_cookie) == 24); * OpenFlow features. In particular attempts to modify the flow table * will be rejected with an OFPBRC_EPERM error. * - * Slave controllers also do not receive asynchronous messages - * (OFPT_PACKET_IN, OFPT_FLOW_REMOVED, OFPT_PORT_STATUS). + * Slave controllers do not receive OFPT_PACKET_IN or OFPT_FLOW_REMOVED + * messages, but they do receive OFPT_PORT_STATUS messages. */ struct nx_role_request { struct nicira_header nxh; - uint32_t role; /* One of NX_ROLE_*. */ + ovs_be32 role; /* One of NX_ROLE_*. */ }; +OFP_ASSERT(sizeof(struct nx_role_request) == 20); enum nx_role { NX_ROLE_OTHER, /* Default role, full access. */ NX_ROLE_MASTER, /* Full access, at most one. */ NX_ROLE_SLAVE /* Read-only access. */ }; + +/* NXT_SET_ASYNC_CONFIG. + * + * Sent by a controller, this message configures the asynchronous messages that + * the controller wants to receive. Element 0 in each array specifies messages + * of interest when the controller has an "other" or "master" role; element 1, + * when the controller has a "slave" role. + * + * Each array element is a bitmask in which a 0-bit disables receiving a + * particular message and a 1-bit enables receiving it. Each bit controls the + * message whose 'reason' corresponds to the bit index. For example, the bit + * with value 1<<2 == 4 in port_status_mask[1] determines whether the + * controller will receive OFPT_PORT_STATUS messages with reason OFPPR_MODIFY + * (value 2) when the controller has a "slave" role. + */ +struct nx_async_config { + struct nicira_header nxh; + ovs_be32 packet_in_mask[2]; /* Bitmasks of OFPR_* values. */ + ovs_be32 port_status_mask[2]; /* Bitmasks of OFPRR_* values. */ + ovs_be32 flow_removed_mask[2]; /* Bitmasks of OFPPR_* values. */ +}; +OFP_ASSERT(sizeof(struct nx_async_config) == 40); /* Nicira vendor flow actions. */ @@ -225,87 +320,119 @@ enum nx_action_subtype { NXAST_SNAT__OBSOLETE, /* No longer used. */ NXAST_RESUBMIT, /* struct nx_action_resubmit */ NXAST_SET_TUNNEL, /* struct nx_action_set_tunnel */ - NXAST_DROP_SPOOFED_ARP, /* struct nx_action_drop_spoofed_arp */ + NXAST_DROP_SPOOFED_ARP__OBSOLETE, NXAST_SET_QUEUE, /* struct nx_action_set_queue */ - NXAST_POP_QUEUE /* struct nx_action_pop_queue */ + NXAST_POP_QUEUE, /* struct nx_action_pop_queue */ + NXAST_REG_MOVE, /* struct nx_action_reg_move */ + NXAST_REG_LOAD, /* struct nx_action_reg_load */ + NXAST_NOTE, /* struct nx_action_note */ + NXAST_SET_TUNNEL64, /* struct nx_action_set_tunnel64 */ + NXAST_MULTIPATH, /* struct nx_action_multipath */ + NXAST_AUTOPATH, /* struct nx_action_autopath */ + NXAST_BUNDLE, /* struct nx_action_bundle */ + NXAST_BUNDLE_LOAD, /* struct nx_action_bundle */ + NXAST_RESUBMIT_TABLE, /* struct nx_action_resubmit */ + NXAST_OUTPUT_REG, /* struct nx_action_output_reg */ + NXAST_LEARN, /* struct nx_action_learn */ + NXAST_EXIT, /* struct nx_action_header */ + NXAST_DEC_TTL, /* struct nx_action_header */ + NXAST_FIN_TIMEOUT, /* struct nx_action_fin_timeout */ + NXAST_CONTROLLER, /* struct nx_action_controller */ }; /* Header for Nicira-defined actions. */ struct nx_action_header { - uint16_t type; /* OFPAT_VENDOR. */ - uint16_t len; /* Length is 16. */ - uint32_t vendor; /* NX_VENDOR_ID. */ - uint16_t subtype; /* NXAST_*. */ + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_*. */ uint8_t pad[6]; }; OFP_ASSERT(sizeof(struct nx_action_header) == 16); -/* Action structure for NXAST_RESUBMIT. +/* Action structures for NXAST_RESUBMIT and NXAST_RESUBMIT_TABLE. + * + * These actions search one of the switch's flow tables: + * + * - For NXAST_RESUBMIT_TABLE only, if the 'table' member is not 255, then + * it specifies the table to search. + * + * - Otherwise (for NXAST_RESUBMIT_TABLE with a 'table' of 255, or for + * NXAST_RESUBMIT regardless of 'table'), it searches the current flow + * table, that is, the OpenFlow flow table that contains the flow from + * which this action was obtained. If this action did not come from a + * flow table (e.g. it came from an OFPT_PACKET_OUT message), then table 0 + * is the current table. * - * NXAST_RESUBMIT searches the flow table again, using a flow that is slightly - * modified from the original lookup: + * The flow table lookup uses a flow that may be slightly modified from the + * original lookup: * - * - The 'in_port' member of struct nx_action_resubmit is used as the flow's - * in_port. + * - For NXAST_RESUBMIT, the 'in_port' member of struct nx_action_resubmit + * is used as the flow's in_port. * - * - If NXAST_RESUBMIT is preceded by actions that affect the flow - * (e.g. OFPAT_SET_VLAN_VID), then the flow is updated with the new - * values. + * - For NXAST_RESUBMIT_TABLE, if the 'in_port' member is not OFPP_IN_PORT, + * then its value is used as the flow's in_port. Otherwise, the original + * in_port is used. + * + * - If actions that modify the flow (e.g. OFPAT_SET_VLAN_VID) precede the + * resubmit action, then the flow is updated with the new values. * * Following the lookup, the original in_port is restored. * * If the modified flow matched in the flow table, then the corresponding - * actions are executed. Afterward, actions following NXAST_RESUBMIT in the + * actions are executed. Afterward, actions following the resubmit in the * original set of actions, if any, are executed; any changes made to the * packet (e.g. changes to VLAN) by secondary actions persist when those * actions are executed, although the original in_port is restored. * - * NXAST_RESUBMIT may be used any number of times within a set of actions. + * Resubmit actions may be used any number of times within a set of actions. + * + * Resubmit actions may nest to an implementation-defined depth. Beyond this + * implementation-defined depth, further resubmit actions are simply ignored. + * + * NXAST_RESUBMIT ignores 'table' and 'pad'. NXAST_RESUBMIT_TABLE requires + * 'pad' to be all-bits-zero. * - * NXAST_RESUBMIT may nest to an implementation-defined depth. Beyond this - * implementation-defined depth, further NXAST_RESUBMIT actions are simply - * ignored. (Open vSwitch 1.0.1 and earlier did not support recursion.) + * Open vSwitch 1.0.1 and earlier did not support recursion. Open vSwitch + * before 1.2.90 did not support NXAST_RESUBMIT_TABLE. */ struct nx_action_resubmit { - uint16_t type; /* OFPAT_VENDOR. */ - uint16_t len; /* Length is 16. */ - uint32_t vendor; /* NX_VENDOR_ID. */ - uint16_t subtype; /* NXAST_RESUBMIT. */ - uint16_t in_port; /* New in_port for checking flow table. */ - uint8_t pad[4]; + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_RESUBMIT. */ + ovs_be16 in_port; /* New in_port for checking flow table. */ + uint8_t table; /* NXAST_RESUBMIT_TABLE: table to use. */ + uint8_t pad[3]; }; OFP_ASSERT(sizeof(struct nx_action_resubmit) == 16); /* Action structure for NXAST_SET_TUNNEL. * - * Sets the encapsulating tunnel ID. */ + * Sets the encapsulating tunnel ID to a 32-bit value. The most-significant 32 + * bits of the tunnel ID are set to 0. */ struct nx_action_set_tunnel { - uint16_t type; /* OFPAT_VENDOR. */ - uint16_t len; /* Length is 16. */ - uint32_t vendor; /* NX_VENDOR_ID. */ - uint16_t subtype; /* NXAST_SET_TUNNEL. */ + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SET_TUNNEL. */ uint8_t pad[2]; - uint32_t tun_id; /* Tunnel ID. */ + ovs_be32 tun_id; /* Tunnel ID. */ }; OFP_ASSERT(sizeof(struct nx_action_set_tunnel) == 16); -/* Action structure for NXAST_DROP_SPOOFED_ARP. +/* Action structure for NXAST_SET_TUNNEL64. * - * Stops processing further actions, if the packet being processed is an - * Ethernet+IPv4 ARP packet for which the source Ethernet address inside the - * ARP packet differs from the source Ethernet address in the Ethernet header. - * - * This is useful because OpenFlow does not provide a way to match on the - * Ethernet addresses inside ARP packets, so there is no other way to drop - * spoofed ARPs other than sending every ARP packet to a controller. */ -struct nx_action_drop_spoofed_arp { - uint16_t type; /* OFPAT_VENDOR. */ - uint16_t len; /* Length is 16. */ - uint32_t vendor; /* NX_VENDOR_ID. */ - uint16_t subtype; /* NXAST_DROP_SPOOFED_ARP. */ + * Sets the encapsulating tunnel ID to a 64-bit value. */ +struct nx_action_set_tunnel64 { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SET_TUNNEL64. */ uint8_t pad[6]; + ovs_be64 tun_id; /* Tunnel ID. */ }; -OFP_ASSERT(sizeof(struct nx_action_drop_spoofed_arp) == 16); +OFP_ASSERT(sizeof(struct nx_action_set_tunnel64) == 24); /* Action structure for NXAST_SET_QUEUE. * @@ -314,12 +441,12 @@ OFP_ASSERT(sizeof(struct nx_action_drop_spoofed_arp) == 16); * an argument. This allows the queue to be defined before the port is * known. */ struct nx_action_set_queue { - uint16_t type; /* OFPAT_VENDOR. */ - uint16_t len; /* Length is 16. */ - uint32_t vendor; /* NX_VENDOR_ID. */ - uint16_t subtype; /* NXAST_SET_QUEUE. */ + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SET_QUEUE. */ uint8_t pad[2]; - uint32_t queue_id; /* Where to enqueue packets. */ + ovs_be32 queue_id; /* Where to enqueue packets. */ }; OFP_ASSERT(sizeof(struct nx_action_set_queue) == 16); @@ -329,19 +456,693 @@ OFP_ASSERT(sizeof(struct nx_action_set_queue) == 16); * were used. Only the original queue can be restored this way; no stack is * maintained. */ struct nx_action_pop_queue { - uint16_t type; /* OFPAT_VENDOR. */ - uint16_t len; /* Length is 16. */ - uint32_t vendor; /* NX_VENDOR_ID. */ - uint16_t subtype; /* NXAST_POP_QUEUE. */ + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_POP_QUEUE. */ uint8_t pad[6]; }; OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); -/* Wildcard for tunnel ID. */ -#define NXFW_TUN_ID (1 << 25) +/* Action structure for NXAST_REG_MOVE. + * + * Copies src[src_ofs:src_ofs+n_bits] to dst[dst_ofs:dst_ofs+n_bits], where + * a[b:c] denotes the bits within 'a' numbered 'b' through 'c' (not including + * bit 'c'). Bit numbering starts at 0 for the least-significant bit, 1 for + * the next most significant bit, and so on. + * + * 'src' and 'dst' are nxm_header values with nxm_hasmask=0. (It doesn't make + * sense to use nxm_hasmask=1 because the action does not do any kind of + * matching; it uses the actual value of a field.) + * + * The following nxm_header values are potentially acceptable as 'src': + * + * - NXM_OF_IN_PORT + * - NXM_OF_ETH_DST + * - NXM_OF_ETH_SRC + * - NXM_OF_ETH_TYPE + * - NXM_OF_VLAN_TCI + * - NXM_OF_IP_TOS + * - NXM_OF_IP_PROTO + * - NXM_OF_IP_SRC + * - NXM_OF_IP_DST + * - NXM_OF_TCP_SRC + * - NXM_OF_TCP_DST + * - NXM_OF_UDP_SRC + * - NXM_OF_UDP_DST + * - NXM_OF_ICMP_TYPE + * - NXM_OF_ICMP_CODE + * - NXM_OF_ARP_OP + * - NXM_OF_ARP_SPA + * - NXM_OF_ARP_TPA + * - NXM_NX_TUN_ID + * - NXM_NX_ARP_SHA + * - NXM_NX_ARP_THA + * - NXM_NX_ICMPV6_TYPE + * - NXM_NX_ICMPV6_CODE + * - NXM_NX_ND_SLL + * - NXM_NX_ND_TLL + * - NXM_NX_REG(idx) for idx in the switch's accepted range. + * + * The following nxm_header values are potentially acceptable as 'dst': + * + * - NXM_OF_ETH_DST + * - NXM_OF_ETH_SRC + * - NXM_OF_IP_TOS + * - NXM_OF_IP_SRC + * - NXM_OF_IP_DST + * - NXM_OF_TCP_SRC + * - NXM_OF_TCP_DST + * - NXM_OF_UDP_SRC + * - NXM_OF_UDP_DST + * Modifying any of the above fields changes the corresponding packet + * header. + * + * - NXM_NX_REG(idx) for idx in the switch's accepted range. + * + * - NXM_OF_VLAN_TCI. Modifying this field's value has side effects on the + * packet's 802.1Q header. Setting a value with CFI=0 removes the 802.1Q + * header (if any), ignoring the other bits. Setting a value with CFI=1 + * adds or modifies the 802.1Q header appropriately, setting the TCI field + * to the field's new value (with the CFI bit masked out). + * + * - NXM_NX_TUN_ID. Modifying this value modifies the tunnel ID used for the + * packet's next tunnel encapsulation. + * + * A given nxm_header value may be used as 'src' or 'dst' only on a flow whose + * nx_match satisfies its prerequisites. For example, NXM_OF_IP_TOS may be + * used only if the flow's nx_match includes an nxm_entry that specifies + * nxm_type=NXM_OF_ETH_TYPE, nxm_hasmask=0, and nxm_value=0x0800. + * + * The switch will reject actions for which src_ofs+n_bits is greater than the + * width of 'src' or dst_ofs+n_bits is greater than the width of 'dst' with + * error type OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT. + */ +struct nx_action_reg_move { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_REG_MOVE. */ + ovs_be16 n_bits; /* Number of bits. */ + ovs_be16 src_ofs; /* Starting bit offset in source. */ + ovs_be16 dst_ofs; /* Starting bit offset in destination. */ + ovs_be32 src; /* Source register. */ + ovs_be32 dst; /* Destination register. */ +}; +OFP_ASSERT(sizeof(struct nx_action_reg_move) == 24); + +/* Action structure for NXAST_REG_LOAD. + * + * Copies value[0:n_bits] to dst[ofs:ofs+n_bits], where a[b:c] denotes the bits + * within 'a' numbered 'b' through 'c' (not including bit 'c'). Bit numbering + * starts at 0 for the least-significant bit, 1 for the next most significant + * bit, and so on. + * + * 'dst' is an nxm_header with nxm_hasmask=0. See the documentation for + * NXAST_REG_MOVE, above, for the permitted fields and for the side effects of + * loading them. + * + * The 'ofs' and 'n_bits' fields are combined into a single 'ofs_nbits' field + * to avoid enlarging the structure by another 8 bytes. To allow 'n_bits' to + * take a value between 1 and 64 (inclusive) while taking up only 6 bits, it is + * also stored as one less than its true value: + * + * 15 6 5 0 + * +------------------------------+------------------+ + * | ofs | n_bits - 1 | + * +------------------------------+------------------+ + * + * The switch will reject actions for which ofs+n_bits is greater than the + * width of 'dst', or in which any bits in 'value' with value 2**n_bits or + * greater are set to 1, with error type OFPET_BAD_ACTION, code + * OFPBAC_BAD_ARGUMENT. + */ +struct nx_action_reg_load { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_REG_LOAD. */ + ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ + ovs_be32 dst; /* Destination register. */ + ovs_be64 value; /* Immediate value. */ +}; +OFP_ASSERT(sizeof(struct nx_action_reg_load) == 24); + +/* Action structure for NXAST_NOTE. + * + * This action has no effect. It is variable length. The switch does not + * attempt to interpret the user-defined 'note' data in any way. A controller + * can use this action to attach arbitrary metadata to a flow. + * + * This action might go away in the future. + */ +struct nx_action_note { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* A multiple of 8, but at least 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_NOTE. */ + uint8_t note[6]; /* Start of user-defined data. */ + /* Possibly followed by additional user-defined data. */ +}; +OFP_ASSERT(sizeof(struct nx_action_note) == 16); + +/* Action structure for NXAST_MULTIPATH. + * + * This action performs the following steps in sequence: + * + * 1. Hashes the fields designated by 'fields', one of NX_HASH_FIELDS_*. + * Refer to the definition of "enum nx_mp_fields" for details. + * + * The 'basis' value is used as a universal hash parameter, that is, + * different values of 'basis' yield different hash functions. The + * particular universal hash function used is implementation-defined. + * + * The hashed fields' values are drawn from the current state of the + * flow, including all modifications that have been made by actions up to + * this point. + * + * 2. Applies the multipath link choice algorithm specified by 'algorithm', + * one of NX_MP_ALG_*. Refer to the definition of "enum nx_mp_algorithm" + * for details. + * + * The output of the algorithm is 'link', an unsigned integer less than + * or equal to 'max_link'. + * + * Some algorithms use 'arg' as an additional argument. + * + * 3. Stores 'link' in dst[ofs:ofs+n_bits]. The format and semantics of + * 'dst' and 'ofs_nbits' are similar to those for the NXAST_REG_LOAD + * action. + * + * The switch will reject actions that have an unknown 'fields', or an unknown + * 'algorithm', or in which ofs+n_bits is greater than the width of 'dst', or + * in which 'max_link' is greater than or equal to 2**n_bits, with error type + * OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT. + */ +struct nx_action_multipath { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 32. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_MULTIPATH. */ + + /* What fields to hash and how. */ + ovs_be16 fields; /* One of NX_HASH_FIELDS_*. */ + ovs_be16 basis; /* Universal hash parameter. */ + ovs_be16 pad0; + + /* Multipath link choice algorithm to apply to hash value. */ + ovs_be16 algorithm; /* One of NX_MP_ALG_*. */ + ovs_be16 max_link; /* Number of output links, minus 1. */ + ovs_be32 arg; /* Algorithm-specific argument. */ + ovs_be16 pad1; + + /* Where to store the result. */ + ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ + ovs_be32 dst; /* Destination. */ +}; +OFP_ASSERT(sizeof(struct nx_action_multipath) == 32); + +/* NXAST_MULTIPATH: Multipath link choice algorithm to apply. + * + * In the descriptions below, 'n_links' is max_link + 1. */ +enum nx_mp_algorithm { + /* link = hash(flow) % n_links. + * + * Redistributes all traffic when n_links changes. O(1) performance. See + * RFC 2992. + * + * Use UINT16_MAX for max_link to get a raw hash value. */ + NX_MP_ALG_MODULO_N, + + /* link = hash(flow) / (MAX_HASH / n_links). + * + * Redistributes between one-quarter and one-half of traffic when n_links + * changes. O(1) performance. See RFC 2992. + */ + NX_MP_ALG_HASH_THRESHOLD, + + /* for i in [0,n_links): + * weights[i] = hash(flow, i) + * link = { i such that weights[i] >= weights[j] for all j != i } + * + * Redistributes 1/n_links of traffic when n_links changes. O(n_links) + * performance. If n_links is greater than a threshold (currently 64, but + * subject to change), Open vSwitch will substitute another algorithm + * automatically. See RFC 2992. */ + NX_MP_ALG_HRW, /* Highest Random Weight. */ + + /* i = 0 + * repeat: + * i = i + 1 + * link = hash(flow, i) % arg + * while link > max_link + * + * Redistributes 1/n_links of traffic when n_links changes. O(1) + * performance when arg/max_link is bounded by a constant. + * + * Redistributes all traffic when arg changes. + * + * arg must be greater than max_link and for best performance should be no + * more than approximately max_link * 2. If arg is outside the acceptable + * range, Open vSwitch will automatically substitute the least power of 2 + * greater than max_link. + * + * This algorithm is specific to Open vSwitch. + */ + NX_MP_ALG_ITER_HASH /* Iterative Hash. */ +}; + +/* Action structure for NXAST_LEARN. + * + * This action adds or modifies a flow in an OpenFlow table, similar to + * OFPT_FLOW_MOD with OFPFC_MODIFY_STRICT as 'command'. The new flow has the + * specified idle timeout, hard timeout, priority, cookie, and flags. The new + * flow's match criteria and actions are built by applying each of the series + * of flow_mod_spec elements included as part of the action. + * + * A flow_mod_spec starts with a 16-bit header. A header that is all-bits-0 is + * a no-op used for padding the action as a whole to a multiple of 8 bytes in + * length. Otherwise, the flow_mod_spec can be thought of as copying 'n_bits' + * bits from a source to a destination. In this case, the header contains + * multiple fields: + * + * 15 14 13 12 11 10 0 + * +------+---+------+---------------------------------+ + * | 0 |src| dst | n_bits | + * +------+---+------+---------------------------------+ + * + * The meaning and format of a flow_mod_spec depends on 'src' and 'dst'. The + * following table summarizes the meaning of each possible combination. + * Details follow the table: + * + * src dst meaning + * --- --- ---------------------------------------------------------- + * 0 0 Add match criteria based on value in a field. + * 1 0 Add match criteria based on an immediate value. + * 0 1 Add NXAST_REG_LOAD action to copy field into a different field. + * 1 1 Add NXAST_REG_LOAD action to load immediate value into a field. + * 0 2 Add OFPAT_OUTPUT action to output to port from specified field. + * All other combinations are undefined and not allowed. + * + * The flow_mod_spec header is followed by a source specification and a + * destination specification. The format and meaning of the source + * specification depends on 'src': + * + * - If 'src' is 0, the source bits are taken from a field in the flow to + * which this action is attached. (This should be a wildcarded field. If + * its value is fully specified then the source bits being copied have + * constant values.) + * + * The source specification is an ovs_be32 'field' and an ovs_be16 'ofs'. + * 'field' is an nxm_header with nxm_hasmask=0, and 'ofs' the starting bit + * offset within that field. The source bits are field[ofs:ofs+n_bits-1]. + * 'field' and 'ofs' are subject to the same restrictions as the source + * field in NXAST_REG_MOVE. + * + * - If 'src' is 1, the source bits are a constant value. The source + * specification is (n_bits+15)/16*2 bytes long. Taking those bytes as a + * number in network order, the source bits are the 'n_bits' + * least-significant bits. The switch will report an error if other bits + * in the constant are nonzero. + * + * The flow_mod_spec destination specification, for 'dst' of 0 or 1, is an + * ovs_be32 'field' and an ovs_be16 'ofs'. 'field' is an nxm_header with + * nxm_hasmask=0 and 'ofs' is a starting bit offset within that field. The + * meaning of the flow_mod_spec depends on 'dst': + * + * - If 'dst' is 0, the flow_mod_spec specifies match criteria for the new + * flow. The new flow matches only if bits field[ofs:ofs+n_bits-1] in a + * packet equal the source bits. 'field' may be any nxm_header with + * nxm_hasmask=0 that is allowed in NXT_FLOW_MOD. + * + * Order is significant. Earlier flow_mod_specs must satisfy any + * prerequisites for matching fields specified later, by copying constant + * values into prerequisite fields. + * + * The switch will reject flow_mod_specs that do not satisfy NXM masking + * restrictions. + * + * - If 'dst' is 1, the flow_mod_spec specifies an NXAST_REG_LOAD action for + * the new flow. The new flow copies the source bits into + * field[ofs:ofs+n_bits-1]. Actions are executed in the same order as the + * flow_mod_specs. + * + * The flow_mod_spec destination spec for 'dst' of 2 (when 'src' is 0) is + * empty. It has the following meaning: + * + * - The flow_mod_spec specifies an OFPAT_OUTPUT action for the new flow. + * The new flow outputs to the OpenFlow port specified by the source field. + * Of the special output ports with value OFPP_MAX or larger, OFPP_IN_PORT, + * OFPP_FLOOD, OFPP_LOCAL, and OFPP_ALL are supported. Other special ports + * may not be used. + * + * Resource Management + * ------------------- + * + * A switch has a finite amount of flow table space available for learning. + * When this space is exhausted, no new learning table entries will be learned + * until some existing flow table entries expire. The controller should be + * prepared to handle this by flooding (which can be implemented as a + * low-priority flow). + * + * If a learned flow matches a single TCP stream with a relatively long + * timeout, one may make the best of resource constraints by setting + * 'fin_idle_timeout' or 'fin_hard_timeout' (both measured in seconds), or + * both, to shorter timeouts. When either of these is specified as a nonzero + * value, OVS adds a NXAST_FIN_TIMEOUT action, with the specified timeouts, to + * the learned flow. + * + * Examples + * -------- + * + * The following examples give a prose description of the flow_mod_specs along + * with informal notation for how those would be represented and a hex dump of + * the bytes that would be required. + * + * These examples could work with various nx_action_learn parameters. Typical + * values would be idle_timeout=OFP_FLOW_PERMANENT, hard_timeout=60, + * priority=OFP_DEFAULT_PRIORITY, flags=0, table_id=10. + * + * 1. Learn input port based on the source MAC, with lookup into + * NXM_NX_REG1[16:31] by resubmit to in_port=99: + * + * Match on in_port=99: + * ovs_be16(src=1, dst=0, n_bits=16), 20 10 + * ovs_be16(99), 00 63 + * ovs_be32(NXM_OF_IN_PORT), ovs_be16(0) 00 00 00 02 00 00 + * + * Match Ethernet destination on Ethernet source from packet: + * ovs_be16(src=0, dst=0, n_bits=48), 00 30 + * ovs_be32(NXM_OF_ETH_SRC), ovs_be16(0) 00 00 04 06 00 00 + * ovs_be32(NXM_OF_ETH_DST), ovs_be16(0) 00 00 02 06 00 00 + * + * Set NXM_NX_REG1[16:31] to the packet's input port: + * ovs_be16(src=0, dst=1, n_bits=16), 08 10 + * ovs_be32(NXM_OF_IN_PORT), ovs_be16(0) 00 00 00 02 00 00 + * ovs_be32(NXM_NX_REG1), ovs_be16(16) 00 01 02 04 00 10 + * + * Given a packet that arrived on port A with Ethernet source address B, + * this would set up the flow "in_port=99, dl_dst=B, + * actions=load:A->NXM_NX_REG1[16..31]". + * + * In syntax accepted by ovs-ofctl, this action is: learn(in_port=99, + * NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], + * load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31]) + * + * 2. Output to input port based on the source MAC and VLAN VID, with lookup + * into NXM_NX_REG1[16:31]: + * + * Match on same VLAN ID as packet: + * ovs_be16(src=0, dst=0, n_bits=12), 00 0c + * ovs_be32(NXM_OF_VLAN_TCI), ovs_be16(0) 00 00 08 02 00 00 + * ovs_be32(NXM_OF_VLAN_TCI), ovs_be16(0) 00 00 08 02 00 00 + * + * Match Ethernet destination on Ethernet source from packet: + * ovs_be16(src=0, dst=0, n_bits=48), 00 30 + * ovs_be32(NXM_OF_ETH_SRC), ovs_be16(0) 00 00 04 06 00 00 + * ovs_be32(NXM_OF_ETH_DST), ovs_be16(0) 00 00 02 06 00 00 + * + * Output to the packet's input port: + * ovs_be16(src=0, dst=2, n_bits=16), 10 10 + * ovs_be32(NXM_OF_IN_PORT), ovs_be16(0) 00 00 00 02 00 00 + * + * Given a packet that arrived on port A with Ethernet source address B in + * VLAN C, this would set up the flow "dl_dst=B, vlan_vid=C, + * actions=output:A". + * + * In syntax accepted by ovs-ofctl, this action is: + * learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], + * output:NXM_OF_IN_PORT[]) + * + * 3. Here's a recipe for a very simple-minded MAC learning switch. It uses a + * 10-second MAC expiration time to make it easier to see what's going on + * + * ovs-vsctl del-controller br0 + * ovs-ofctl del-flows br0 + * ovs-ofctl add-flow br0 "table=0 actions=learn(table=1, \ + hard_timeout=10, NXM_OF_VLAN_TCI[0..11], \ + NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], \ + output:NXM_OF_IN_PORT[]), resubmit(,1)" + * ovs-ofctl add-flow br0 "table=1 priority=0 actions=flood" + * + * You can then dump the MAC learning table with: + * + * ovs-ofctl dump-flows br0 table=1 + * + * Usage Advice + * ------------ + * + * For best performance, segregate learned flows into a table that is not used + * for any other flows except possibly for a lowest-priority "catch-all" flow + * (a flow with no match criteria). If different learning actions specify + * different match criteria, use different tables for the learned flows. + * + * The meaning of 'hard_timeout' and 'idle_timeout' can be counterintuitive. + * These timeouts apply to the flow that is added, which means that a flow with + * an idle timeout will expire when no traffic has been sent *to* the learned + * address. This is not usually the intent in MAC learning; instead, we want + * the MAC learn entry to expire when no traffic has been sent *from* the + * learned address. Use a hard timeout for that. + */ +struct nx_action_learn { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* At least 24. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_LEARN. */ + ovs_be16 idle_timeout; /* Idle time before discarding (seconds). */ + ovs_be16 hard_timeout; /* Max time before discarding (seconds). */ + ovs_be16 priority; /* Priority level of flow entry. */ + ovs_be64 cookie; /* Cookie for new flow. */ + ovs_be16 flags; /* Either 0 or OFPFF_SEND_FLOW_REM. */ + uint8_t table_id; /* Table to insert flow entry. */ + uint8_t pad; /* Must be zero. */ + ovs_be16 fin_idle_timeout; /* Idle timeout after FIN, if nonzero. */ + ovs_be16 fin_hard_timeout; /* Hard timeout after FIN, if nonzero. */ + /* Followed by a sequence of flow_mod_spec elements, as described above, + * until the end of the action is reached. */ +}; +OFP_ASSERT(sizeof(struct nx_action_learn) == 32); + +#define NX_LEARN_N_BITS_MASK 0x3ff + +#define NX_LEARN_SRC_FIELD (0 << 13) /* Copy from field. */ +#define NX_LEARN_SRC_IMMEDIATE (1 << 13) /* Copy from immediate value. */ +#define NX_LEARN_SRC_MASK (1 << 13) + +#define NX_LEARN_DST_MATCH (0 << 11) /* Add match criterion. */ +#define NX_LEARN_DST_LOAD (1 << 11) /* Add NXAST_REG_LOAD action. */ +#define NX_LEARN_DST_OUTPUT (2 << 11) /* Add OFPAT_OUTPUT action. */ +#define NX_LEARN_DST_RESERVED (3 << 11) /* Not yet defined. */ +#define NX_LEARN_DST_MASK (3 << 11) + +/* Action structure for NXAST_FIN_TIMEOUT. + * + * This action changes the idle timeout or hard timeout, or both, of this + * OpenFlow rule when the rule matches a TCP packet with the FIN or RST flag. + * When such a packet is observed, the action reduces the rule's idle timeout + * to 'fin_idle_timeout' and its hard timeout to 'fin_hard_timeout'. This + * action has no effect on an existing timeout that is already shorter than the + * one that the action specifies. A 'fin_idle_timeout' or 'fin_hard_timeout' + * of zero has no effect on the respective timeout. + * + * 'fin_idle_timeout' and 'fin_hard_timeout' are measured in seconds. + * 'fin_hard_timeout' specifies time since the flow's creation, not since the + * receipt of the FIN or RST. + * + * This is useful for quickly discarding learned TCP flows that otherwise will + * take a long time to expire. + * + * This action is intended for use with an OpenFlow rule that matches only a + * single TCP flow. If the rule matches multiple TCP flows (e.g. it wildcards + * all TCP traffic, or all TCP traffic to a particular port), then any FIN or + * RST in any of those flows will cause the entire OpenFlow rule to expire + * early, which is not normally desirable. + */ +struct nx_action_fin_timeout { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_FIN_TIMEOUT. */ + ovs_be16 fin_idle_timeout; /* New idle timeout, if nonzero. */ + ovs_be16 fin_hard_timeout; /* New hard timeout, if nonzero. */ + ovs_be16 pad; /* Must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_fin_timeout) == 16); + +/* Action structure for NXAST_AUTOPATH. + * + * This action performs the following steps in sequence: + * + * 1. Hashes the flow using an implementation-defined hash function. + * + * The hashed fields' values are drawn from the current state of the + * flow, including all modifications that have been made by actions up to + * this point. + * + * 2. Selects an OpenFlow 'port'. + * + * 'port' is selected in an implementation-defined manner, taking into + * account 'id' and the hash value calculated in step 1. + * + * Generally a switch will have been configured with a set of ports that + * may be chosen given 'id'. The switch may take into account any number + * of factors when choosing 'port' from its configured set. Factors may + * include carrier, load, and the results of configuration protocols such + * as LACP. + * + * 3. Stores 'port' in dst[ofs:ofs+n_bits]. + * + * The format and semantics of 'dst' and 'ofs_nbits' are similar to those + * for the NXAST_REG_LOAD action. + * + * The switch will reject actions in which ofs+n_bits is greater than the width + * of 'dst', with error type OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT. + */ +struct nx_action_autopath { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 20. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_AUTOPATH. */ + + /* Where to store the result. */ + ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ + ovs_be32 dst; /* Destination. */ + + ovs_be32 id; /* Autopath ID. */ + ovs_be32 pad; +}; +OFP_ASSERT(sizeof(struct nx_action_autopath) == 24); + +/* Action structure for NXAST_BUNDLE and NXAST_BUNDLE_LOAD. + * + * The bundle actions choose a slave from a supplied list of options. + * NXAST_BUNDLE outputs to its selection. NXAST_BUNDLE_LOAD writes its + * selection to a register. + * + * The list of possible slaves follows the nx_action_bundle structure. The size + * of each slave is governed by its type as indicated by the 'slave_type' + * parameter. The list of slaves should be padded at its end with zeros to make + * the total length of the action a multiple of 8. + * + * Switches infer from the 'slave_type' parameter the size of each slave. All + * implementations must support the NXM_OF_IN_PORT 'slave_type' which indicates + * that the slaves are OpenFlow port numbers with NXM_LENGTH(NXM_OF_IN_PORT) == + * 2 byte width. Switches should reject actions which indicate unknown or + * unsupported slave types. + * + * Switches use a strategy dictated by the 'algorithm' parameter to choose a + * slave. If the switch does not support the specified 'algorithm' parameter, + * it should reject the action. + * + * Several algorithms take into account liveness when selecting slaves. The + * liveness of a slave is implementation defined (with one exception), but will + * generally take into account things like its carrier status and the results + * of any link monitoring protocols which happen to be running on it. In order + * to give controllers a place-holder value, the OFPP_NONE port is always + * considered live. + * + * Some slave selection strategies require the use of a hash function, in which + * case the 'fields' and 'basis' parameters should be populated. The 'fields' + * parameter (one of NX_HASH_FIELDS_*) designates which parts of the flow to + * hash. Refer to the definition of "enum nx_hash_fields" for details. The + * 'basis' parameter is used as a universal hash parameter. Different values + * of 'basis' yield different hash results. + * + * The 'zero' parameter at the end of the action structure is reserved for + * future use. Switches are required to reject actions which have nonzero + * bytes in the 'zero' field. + * + * NXAST_BUNDLE actions should have 'ofs_nbits' and 'dst' zeroed. Switches + * should reject actions which have nonzero bytes in either of these fields. + * + * NXAST_BUNDLE_LOAD stores the OpenFlow port number of the selected slave in + * dst[ofs:ofs+n_bits]. The format and semantics of 'dst' and 'ofs_nbits' are + * similar to those for the NXAST_REG_LOAD action. */ +struct nx_action_bundle { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length including slaves. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_BUNDLE or NXAST_BUNDLE_LOAD. */ + + /* Slave choice algorithm to apply to hash value. */ + ovs_be16 algorithm; /* One of NX_BD_ALG_*. */ + + /* What fields to hash and how. */ + ovs_be16 fields; /* One of NX_HASH_FIELDS_*. */ + ovs_be16 basis; /* Universal hash parameter. */ + + ovs_be32 slave_type; /* NXM_OF_IN_PORT. */ + ovs_be16 n_slaves; /* Number of slaves. */ -#define NXFW_ALL NXFW_TUN_ID -#define OVSFW_ALL (OFPFW_ALL | NXFW_ALL) + ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ + ovs_be32 dst; /* Destination. */ + + uint8_t zero[4]; /* Reserved. Must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_bundle) == 32); + +/* NXAST_BUNDLE: Bundle slave choice algorithm to apply. + * + * In the descriptions below, 'slaves' is the list of possible slaves in the + * order they appear in the OpenFlow action. */ +enum nx_bd_algorithm { + /* Chooses the first live slave listed in the bundle. + * + * O(n_slaves) performance. */ + NX_BD_ALG_ACTIVE_BACKUP, + + /* for i in [0,n_slaves): + * weights[i] = hash(flow, i) + * slave = { slaves[i] such that weights[i] >= weights[j] for all j != i } + * + * Redistributes 1/n_slaves of traffic when a slave's liveness changes. + * O(n_slaves) performance. + * + * Uses the 'fields' and 'basis' parameters. */ + NX_BD_ALG_HRW /* Highest Random Weight. */ +}; + +/* Action structure for NXAST_OUTPUT_REG. + * + * Outputs to the OpenFlow port number written to src[ofs:ofs+nbits]. + * + * The format and semantics of 'src' and 'ofs_nbits' are similar to those for + * the NXAST_REG_LOAD action. + * + * The acceptable nxm_header values for 'src' are the same as the acceptable + * nxm_header values for the 'src' field of NXAST_REG_MOVE. + * + * The 'max_len' field indicates the number of bytes to send when the chosen + * port is OFPP_CONTROLLER. Its semantics are equivalent to the 'max_len' + * field of OFPAT_OUTPUT. + * + * The 'zero' field is required to be zeroed for forward compatibility. */ +struct nx_action_output_reg { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* 24. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_OUTPUT_REG. */ + + ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ + ovs_be32 src; /* Source. */ + + ovs_be16 max_len; /* Max length to send to controller. */ + + uint8_t zero[6]; /* Reserved, must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); + +/* NXAST_EXIT + * + * Discontinues action processing. + * + * The NXAST_EXIT action causes the switch to immediately halt processing + * actions for the flow. Any actions which have already been processed are + * executed by the switch. However, any further actions, including those which + * may be in different tables, or different levels of the NXAST_RESUBMIT + * hierarchy, will be ignored. + * + * Uses the nx_action_header structure. */ /* Flexible flow specifications (aka NXM = Nicira Extended Match). * @@ -450,12 +1251,12 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); * and nxm_value=0x0800. That is, matching on the IP source address is * allowed only if the Ethernet type is explicitly set to IP. * - * - An nxm_entry for nxm_type=NXM_OF_TCP_SRC is allowed only if it is preced - * by an entry with nxm_type=NXM_OF_ETH_TYPE, nxm_hasmask=0, - * nxm_value=0x0800 and another with nxm_type=NXM_OF_IP_PROTO, - * nxm_hasmask=0, nxm_value=6, in that order. That is, matching on the TCP - * source port is allowed only if the Ethernet type is IP and the IP - * protocol is TCP. + * - An nxm_entry for nxm_type=NXM_OF_TCP_SRC is allowed only if it is + * preceded by an entry with nxm_type=NXM_OF_ETH_TYPE, nxm_hasmask=0, and + * nxm_value either 0x0800 or 0x86dd, and another with + * nxm_type=NXM_OF_IP_PROTO, nxm_hasmask=0, nxm_value=6, in that order. + * That is, matching on the TCP source port is allowed only if the Ethernet + * type is IP or IPv6 and the IP protocol is TCP. * * These restrictions should be noted in specifications for individual fields. * A switch may implement relaxed versions of these restrictions. A switch @@ -480,7 +1281,7 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); * numbers and byte indexes. * * - * 8-bit nxm_value, nxm_hasmask=1, nxm_length=1: + * 8-bit nxm_value, nxm_hasmask=1, nxm_length=2: * * 0 3 4 5 * +------------+---+---+ @@ -564,8 +1365,12 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); * * Format: 48-bit Ethernet MAC address. * - * Masking: Not maskable. */ + * Masking: The nxm_mask patterns 01:00:00:00:00:00 and FE:FF:FF:FF:FF:FF must + * be supported for NXM_OF_ETH_DST_W (as well as the trivial patterns that + * are all-0-bits or all-1-bits). Support for other patterns and for masking + * of NXM_OF_ETH_SRC is optional. */ #define NXM_OF_ETH_DST NXM_HEADER (0x0000, 1, 6) +#define NXM_OF_ETH_DST_W NXM_HEADER_W(0x0000, 1, 6) #define NXM_OF_ETH_SRC NXM_HEADER (0x0000, 2, 6) /* Packet's Ethernet type. @@ -617,15 +1422,21 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); * - Testing with a specific PCP and CFI=1, with nxm_mask=0xf000, matches * packets that have an 802.1Q header with that PCP (and any VID). * - * - Testing with nxm_value=0, nxm_mask=0xe000 matches packets with no 802.1Q + * - Testing with nxm_value=0, nxm_mask=0x0fff matches packets with no 802.1Q * header or with an 802.1Q header with a VID of 0. + * + * - Testing with nxm_value=0, nxm_mask=0xe000 matches packets with no 802.1Q + * header or with an 802.1Q header with a PCP of 0. + * + * - Testing with nxm_value=0, nxm_mask=0xefff matches packets with no 802.1Q + * header or with an 802.1Q header with both VID and PCP of 0. */ #define NXM_OF_VLAN_TCI NXM_HEADER (0x0000, 4, 2) #define NXM_OF_VLAN_TCI_W NXM_HEADER_W(0x0000, 4, 2) /* The "type of service" byte of the IP header, with the ECN bits forced to 0. * - * Prereqs: NXM_OF_ETH_TYPE must match 0x0800 exactly. + * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. * * Format: 8-bit integer with 2 least-significant bits forced to 0. * @@ -634,7 +1445,7 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); /* The "protocol" byte in the IP header. * - * Prereqs: NXM_OF_ETH_TYPE must match 0x0800 exactly. + * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. * * Format: 8-bit integer. * @@ -657,26 +1468,32 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); /* The source or destination port in the TCP header. * * Prereqs: - * NXM_OF_ETH_TYPE must match 0x0800 exactly. + * NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. * NXM_OF_IP_PROTO must match 6 exactly. * * Format: 16-bit integer in network byte order. * - * Masking: Not maskable. */ + * Masking: Fully maskable, in Open vSwitch 1.6 and later. Not maskable, in + * earlier versions. */ #define NXM_OF_TCP_SRC NXM_HEADER (0x0000, 9, 2) +#define NXM_OF_TCP_SRC_W NXM_HEADER_W(0x0000, 9, 2) #define NXM_OF_TCP_DST NXM_HEADER (0x0000, 10, 2) +#define NXM_OF_TCP_DST_W NXM_HEADER_W(0x0000, 10, 2) /* The source or destination port in the UDP header. * * Prereqs: - * NXM_OF_ETH_TYPE must match 0x0800 exactly. + * NXM_OF_ETH_TYPE must match either 0x0800 or 0x86dd. * NXM_OF_IP_PROTO must match 17 exactly. * * Format: 16-bit integer in network byte order. * - * Masking: Not maskable. */ + * Masking: Fully maskable, in Open vSwitch 1.6 and later. Not maskable, in + * earlier versions. */ #define NXM_OF_UDP_SRC NXM_HEADER (0x0000, 11, 2) +#define NXM_OF_UDP_SRC_W NXM_HEADER_W(0x0000, 11, 2) #define NXM_OF_UDP_DST NXM_HEADER (0x0000, 12, 2) +#define NXM_OF_UDP_DST_W NXM_HEADER_W(0x0000, 12, 2) /* The type or code in the ICMP header. * @@ -721,6 +1538,34 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); /* ## Nicira match extensions. ## */ /* ## ------------------------ ## */ +/* Metadata registers. + * + * Registers initially have value 0. Actions allow register values to be + * manipulated. + * + * Prereqs: None. + * + * Format: Array of 32-bit integer registers. Space is reserved for up to + * NXM_NX_MAX_REGS registers, but switches may implement fewer. + * + * Masking: Arbitrary masks. */ +#define NXM_NX_MAX_REGS 16 +#define NXM_NX_REG(IDX) NXM_HEADER (0x0001, IDX, 4) +#define NXM_NX_REG_W(IDX) NXM_HEADER_W(0x0001, IDX, 4) +#define NXM_NX_REG_IDX(HEADER) NXM_FIELD(HEADER) +#define NXM_IS_NX_REG(HEADER) (!((((HEADER) ^ NXM_NX_REG0)) & 0xffffe1ff)) +#define NXM_IS_NX_REG_W(HEADER) (!((((HEADER) ^ NXM_NX_REG0_W)) & 0xffffe1ff)) +#define NXM_NX_REG0 NXM_HEADER (0x0001, 0, 4) +#define NXM_NX_REG0_W NXM_HEADER_W(0x0001, 0, 4) +#define NXM_NX_REG1 NXM_HEADER (0x0001, 1, 4) +#define NXM_NX_REG1_W NXM_HEADER_W(0x0001, 1, 4) +#define NXM_NX_REG2 NXM_HEADER (0x0001, 2, 4) +#define NXM_NX_REG2_W NXM_HEADER_W(0x0001, 2, 4) +#define NXM_NX_REG3 NXM_HEADER (0x0001, 3, 4) +#define NXM_NX_REG3_W NXM_HEADER_W(0x0001, 3, 4) +#define NXM_NX_REG4 NXM_HEADER (0x0001, 4, 4) +#define NXM_NX_REG4_W NXM_HEADER_W(0x0001, 4, 4) + /* Tunnel ID. * * For a packet received via GRE tunnel including a (32-bit) key, the key is @@ -735,27 +1580,199 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); #define NXM_NX_TUN_ID NXM_HEADER (0x0001, 16, 8) #define NXM_NX_TUN_ID_W NXM_HEADER_W(0x0001, 16, 8) +/* For an Ethernet+IP ARP packet, the source or target hardware address + * in the ARP header. Always 0 otherwise. + * + * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly. + * + * Format: 48-bit Ethernet MAC address. + * + * Masking: Not maskable. */ +#define NXM_NX_ARP_SHA NXM_HEADER (0x0001, 17, 6) +#define NXM_NX_ARP_THA NXM_HEADER (0x0001, 18, 6) + +/* The source or destination address in the IPv6 header. + * + * Prereqs: NXM_OF_ETH_TYPE must match 0x86dd exactly. + * + * Format: 128-bit IPv6 address. + * + * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * high-order bits set to 1 and the other 128-N bits set to 0. */ +#define NXM_NX_IPV6_SRC NXM_HEADER (0x0001, 19, 16) +#define NXM_NX_IPV6_SRC_W NXM_HEADER_W(0x0001, 19, 16) +#define NXM_NX_IPV6_DST NXM_HEADER (0x0001, 20, 16) +#define NXM_NX_IPV6_DST_W NXM_HEADER_W(0x0001, 20, 16) + +/* The type or code in the ICMPv6 header. + * + * Prereqs: + * NXM_OF_ETH_TYPE must match 0x86dd exactly. + * NXM_OF_IP_PROTO must match 58 exactly. + * + * Format: 8-bit integer. + * + * Masking: Not maskable. */ +#define NXM_NX_ICMPV6_TYPE NXM_HEADER (0x0001, 21, 1) +#define NXM_NX_ICMPV6_CODE NXM_HEADER (0x0001, 22, 1) + +/* The target address in an IPv6 Neighbor Discovery message. + * + * Prereqs: + * NXM_OF_ETH_TYPE must match 0x86dd exactly. + * NXM_OF_IP_PROTO must match 58 exactly. + * NXM_OF_ICMPV6_TYPE must be either 135 or 136. + * + * Format: 128-bit IPv6 address. + * + * Masking: Not maskable. */ +#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16) + +/* The source link-layer address option in an IPv6 Neighbor Discovery + * message. + * + * Prereqs: + * NXM_OF_ETH_TYPE must match 0x86dd exactly. + * NXM_OF_IP_PROTO must match 58 exactly. + * NXM_OF_ICMPV6_TYPE must be exactly 135. + * + * Format: 48-bit Ethernet MAC address. + * + * Masking: Not maskable. */ +#define NXM_NX_ND_SLL NXM_HEADER (0x0001, 24, 6) + +/* The target link-layer address option in an IPv6 Neighbor Discovery + * message. + * + * Prereqs: + * NXM_OF_ETH_TYPE must match 0x86dd exactly. + * NXM_OF_IP_PROTO must match 58 exactly. + * NXM_OF_ICMPV6_TYPE must be exactly 136. + * + * Format: 48-bit Ethernet MAC address. + * + * Masking: Not maskable. */ +#define NXM_NX_ND_TLL NXM_HEADER (0x0001, 25, 6) + +/* IP fragment information. + * + * Prereqs: + * NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. + * + * Format: 8-bit value with one of the values 0, 1, or 3, as described below. + * + * Masking: Fully maskable. + * + * This field has three possible values: + * + * - A packet that is not an IP fragment has value 0. + * + * - A packet that is an IP fragment with offset 0 (the first fragment) has + * bit 0 set and thus value 1. + * + * - A packet that is an IP fragment with nonzero offset has bits 0 and 1 set + * and thus value 3. + * + * NX_IP_FRAG_ANY and NX_IP_FRAG_LATER are declared to symbolically represent + * the meanings of bits 0 and 1. + * + * The switch may reject matches against values that can never appear. + * + * It is important to understand how this field interacts with the OpenFlow IP + * fragment handling mode: + * + * - In OFPC_FRAG_DROP mode, the OpenFlow switch drops all IP fragments + * before they reach the flow table, so every packet that is available for + * matching will have value 0 in this field. + * + * - Open vSwitch does not implement OFPC_FRAG_REASM mode, but if it did then + * IP fragments would be reassembled before they reached the flow table and + * again every packet available for matching would always have value 0. + * + * - In OFPC_FRAG_NORMAL mode, all three values are possible, but OpenFlow + * 1.0 says that fragments' transport ports are always 0, even for the + * first fragment, so this does not provide much extra information. + * + * - In OFPC_FRAG_NX_MATCH mode, all three values are possible. For + * fragments with offset 0, Open vSwitch makes L4 header information + * available. + */ +#define NXM_NX_IP_FRAG NXM_HEADER (0x0001, 26, 1) +#define NXM_NX_IP_FRAG_W NXM_HEADER_W(0x0001, 26, 1) + +/* Bits in the value of NXM_NX_IP_FRAG. */ +#define NX_IP_FRAG_ANY (1 << 0) /* Is this a fragment? */ +#define NX_IP_FRAG_LATER (1 << 1) /* Is this a fragment with nonzero offset? */ + +/* The flow label in the IPv6 header. + * + * Prereqs: NXM_OF_ETH_TYPE must match 0x86dd exactly. + * + * Format: 20-bit IPv6 flow label in least-significant bits. + * + * Masking: Not maskable. */ +#define NXM_NX_IPV6_LABEL NXM_HEADER (0x0001, 27, 4) + +/* The ECN of the IP header. + * + * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. + * + * Format: ECN in the low-order 2 bits. + * + * Masking: Not maskable. */ +#define NXM_NX_IP_ECN NXM_HEADER (0x0001, 28, 1) + +/* The time-to-live/hop limit of the IP header. + * + * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. + * + * Format: 8-bit integer. + * + * Masking: Not maskable. */ +#define NXM_NX_IP_TTL NXM_HEADER (0x0001, 29, 1) + +/* Flow cookie. + * + * This may be used to gain the OpenFlow 1.1-like ability to restrict + * certain NXM-based Flow Mod and Flow Stats Request messages to flows + * with specific cookies. See the "nx_flow_mod" and "nx_flow_stats_request" + * structure definitions for more details. This match is otherwise not + * allowed. + * + * Prereqs: None. + * + * Format: 64-bit integer in network byte order. + * + * Masking: Arbitrary masks. */ +#define NXM_NX_COOKIE NXM_HEADER (0x0001, 30, 8) +#define NXM_NX_COOKIE_W NXM_HEADER_W(0x0001, 30, 8) + /* ## --------------------- ## */ /* ## Requests and replies. ## */ /* ## --------------------- ## */ -enum { +enum nx_flow_format { NXFF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */ - NXFF_TUN_ID_FROM_COOKIE = 1, /* OpenFlow 1.0, plus obtain tunnel ID from - * cookie. */ NXFF_NXM = 2 /* Nicira extended match. */ }; /* NXT_SET_FLOW_FORMAT request. */ -struct nxt_set_flow_format { +struct nx_set_flow_format { struct ofp_header header; ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be32 subtype; /* NXT_SET_FLOW_FORMAT. */ ovs_be32 format; /* One of NXFF_*. */ }; -OFP_ASSERT(sizeof(struct nxt_set_flow_format) == 20); +OFP_ASSERT(sizeof(struct nx_set_flow_format) == 20); -/* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD). */ +/* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD). + * + * It is possible to limit flow deletions and modifications to certain + * cookies by using the NXM_NX_COOKIE and NXM_NX_COOKIE_W matches. For + * these commands, the "cookie" field is always ignored. Flow additions + * make use of the "cookie" field and ignore any NXM_NX_COOKIE* + * definitions. + */ struct nx_flow_mod { struct nicira_header nxh; ovs_be64 cookie; /* Opaque controller-issued identifier. */ @@ -804,7 +1821,11 @@ struct nx_flow_removed { OFP_ASSERT(sizeof(struct nx_flow_removed) == 56); /* Nicira vendor stats request of type NXST_FLOW (analogous to OFPST_FLOW - * request). */ + * request). + * + * It is possible to limit matches to certain cookies by using the + * NXM_NX_COOKIE and NXM_NX_COOKIE_W matches. + */ struct nx_flow_stats_request { struct nicira_stats_msg nsm; ovs_be16 out_port; /* Require matching entries to include this @@ -824,7 +1845,27 @@ struct nx_flow_stats_request { OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 32); /* Body for Nicira vendor stats reply of type NXST_FLOW (analogous to - * OFPST_FLOW reply). */ + * OFPST_FLOW reply). + * + * The values of 'idle_age' and 'hard_age' are only meaningful when talking to + * a switch that implements the NXT_FLOW_AGE extension. Zero means that the + * true value is unknown, perhaps because hardware does not track the value. + * (Zero is also the value that one should ordinarily expect to see talking to + * a switch that does not implement NXT_FLOW_AGE, since those switches zero the + * padding bytes that these fields replaced.) A nonzero value X represents X-1 + * seconds. A value of 65535 represents 65534 or more seconds. + * + * 'idle_age' is the number of seconds that the flow has been idle, that is, + * the number of seconds since a packet passed through the flow. 'hard_age' is + * the number of seconds since the flow was last modified (e.g. OFPFC_MODIFY or + * OFPFC_MODIFY_STRICT). (The 'duration_*' fields are the elapsed time since + * the flow was added, regardless of subsequent modifications.) + * + * For a flow with an idle or hard timeout, 'idle_age' or 'hard_age', + * respectively, will ordinarily be smaller than the timeout, but flow + * expiration times are only approximate and so one must be prepared to + * tolerate expirations that occur somewhat early or late. + */ struct nx_flow_stats { ovs_be16 length; /* Length of this entry. */ uint8_t table_id; /* ID of table flow came from. */ @@ -837,10 +1878,11 @@ struct nx_flow_stats { ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */ ovs_be16 hard_timeout; /* Number of seconds before expiration. */ ovs_be16 match_len; /* Length of nx_match. */ - uint8_t pad2[4]; /* Align to 64 bits. */ + ovs_be16 idle_age; /* Seconds since last packet, plus one. */ + ovs_be16 hard_age; /* Seconds since last modification, plus one. */ ovs_be64 cookie; /* Opaque controller-issued identifier. */ - ovs_be64 packet_count; /* Number of packets in flow. */ - ovs_be64 byte_count; /* Number of bytes in flow. */ + ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */ + ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */ /* Followed by: * - Exactly match_len (possibly 0) bytes containing the nx_match, then * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of @@ -872,15 +1914,54 @@ struct nx_aggregate_stats_request { OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 32); /* Body for nicira_stats_msg reply of type NXST_AGGREGATE (analogous to - * OFPST_AGGREGATE reply). - * - * ofp_aggregate_stats_reply does not contain an ofp_match structure, so we - * reuse it entirely. (It would be very odd to use OFPST_AGGREGATE to reply to - * an NXST_AGGREGATE request, so we don't do that.) */ + * OFPST_AGGREGATE reply). */ struct nx_aggregate_stats_reply { struct nicira_stats_msg nsm; - struct ofp_aggregate_stats_reply asr; + ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */ + ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */ + ovs_be32 flow_count; /* Number of flows. */ + uint8_t pad[4]; /* Align to 64 bits. */ }; OFP_ASSERT(sizeof(struct nx_aggregate_stats_reply) == 48); + +/* NXT_SET_CONTROLLER_ID. + * + * Each OpenFlow controller connection has a 16-bit identifier that is + * initially 0. This message changes the connection's ID to 'id'. + * + * Controller connection IDs need not be unique. + * + * The NXAST_CONTROLLER action is the only current user of controller + * connection IDs. */ +struct nx_controller_id { + struct nicira_header nxh; + uint8_t zero[6]; /* Must be zero. */ + ovs_be16 controller_id; /* New controller connection ID. */ +}; +OFP_ASSERT(sizeof(struct nx_controller_id) == 24); + +/* Action structure for NXAST_CONTROLLER. + * + * This generalizes using OFPAT_OUTPUT to send a packet to OFPP_CONTROLLER. In + * addition to the 'max_len' that OFPAT_OUTPUT supports, it also allows + * specifying: + * + * - 'reason': The reason code to use in the ofp_packet_in or nx_packet_in. + * + * - 'controller_id': The ID of the controller connection to which the + * ofp_packet_in should be sent. The ofp_packet_in or nx_packet_in is + * sent only to controllers that have the specified controller connection + * ID. See "struct nx_controller_id" for more information. */ +struct nx_action_controller { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_CONTROLLER. */ + ovs_be16 max_len; /* Maximum length to send to controller. */ + ovs_be16 controller_id; /* Controller ID to send packet-in. */ + uint8_t reason; /* enum ofp_packet_in_reason (OFPR_*). */ + uint8_t zero; /* Must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_controller) == 16); #endif /* openflow/nicira-ext.h */