X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fopenflow%2Fnicira-ext.h;h=fe954cdbf49b3c9b1d3f8022997e08de89796433;hb=HEAD;hp=b97cd4fcbf077c2ad1c7e0ec4f56c01bd441e006;hpb=a368bb53d9769ae42042e122775672ac9546e3f9;p=sliver-openvswitch.git diff --git a/include/openflow/nicira-ext.h b/include/openflow/nicira-ext.h index b97cd4fcb..fe954cdbf 100644 --- a/include/openflow/nicira-ext.h +++ b/include/openflow/nicira-ext.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008, 2009, 2010, 2011 Nicira Networks + * Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013 Nicira, Inc. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -20,11 +20,10 @@ #include "openflow/openflow.h" #include "openvswitch/types.h" -/* The following vendor extensions, proposed by Nicira Networks, are not yet +/* The following vendor extensions, proposed by Nicira, are not yet * standardized, so they are not included in openflow.h. Some of them may be * suitable for standardization; others we never expect to standardize. */ -#define NX_VENDOR_ID 0x00002320 /* Nicira vendor-specific error messages extension. * @@ -67,105 +66,32 @@ struct nx_vendor_error { /* Followed by at least the first 64 bytes of the failed request. */ }; -/* Specific Nicira extension error numbers. - * - * These are the "code" values used in nx_vendor_error. So far, the "type" - * values in nx_vendor_error are the same as those in ofp_error_msg. That is, - * at Nicira so far we've only needed additional vendor-specific 'code' values, - * so we're using the existing 'type' values to avoid having to invent new ones - * that duplicate the current ones' meanings. */ - -/* Additional "code" values for OFPET_BAD_REQUEST. */ -enum nx_bad_request_code { -/* Nicira Extended Match (NXM) errors. */ - - /* Generic error code used when there is an error in an NXM sent to the - * switch. The switch may use one of the more specific error codes below, - * if there is an appropriate one, to simplify debugging, but it is not - * required to do so. */ - NXBRC_NXM_INVALID = 0x100, - - /* The nxm_type, or nxm_type taken in combination with nxm_hasmask or - * nxm_length or both, is invalid or not implemented. */ - NXBRC_NXM_BAD_TYPE = 0x101, - - /* Invalid nxm_value. */ - NXBRC_NXM_BAD_VALUE = 0x102, - - /* Invalid nxm_mask. */ - NXBRC_NXM_BAD_MASK = 0x103, - - /* A prerequisite was not met. */ - NXBRC_NXM_BAD_PREREQ = 0x104, - - /* A given nxm_type was specified more than once. */ - NXBRC_NXM_DUP_TYPE = 0x105 -}; - -/* Additional "code" values for OFPET_FLOW_MOD_FAILED. */ -enum nx_flow_mod_failed_code { - /* Generic hardware error. */ - NXFMFC_HARDWARE = 0x100, - - /* A nonexistent table ID was specified in the "command" field of struct - * ofp_flow_mod, when the nxt_flow_mod_table_id extension is enabled. */ - NXFMFC_BAD_TABLE_ID = 0x101 -}; - /* Nicira vendor requests and replies. */ /* Header for Nicira vendor requests and replies. */ struct nicira_header { struct ofp_header header; ovs_be32 vendor; /* NX_VENDOR_ID. */ - ovs_be32 subtype; /* One of NXT_* below. */ + ovs_be32 subtype; /* See the NXT numbers in ofp-msgs.h. */ }; OFP_ASSERT(sizeof(struct nicira_header) == 16); -/* Values for the 'subtype' member of struct nicira_header. */ -enum nicira_type { - /* No longer used. */ - NXT_STATUS_REQUEST__OBSOLETE = 0, - NXT_STATUS_REPLY__OBSOLETE = 1, - NXT_ACT_SET_CONFIG__OBSOLETE = 2, - NXT_ACT_GET_CONFIG__OBSOLETE = 3, - NXT_COMMAND_REQUEST__OBSOLETE = 4, - NXT_COMMAND_REPLY__OBSOLETE = 5, - NXT_FLOW_END_CONFIG__OBSOLETE = 6, - NXT_FLOW_END__OBSOLETE = 7, - NXT_MGMT__OBSOLETE = 8, - NXT_TUN_ID_FROM_COOKIE__OBSOLETE = 9, - - /* Controller role support. The request body is struct nx_role_request. - * The reply echos the request. */ - NXT_ROLE_REQUEST = 10, - NXT_ROLE_REPLY = 11, - - /* Flexible flow specification (aka NXM = Nicira Extended Match). */ - NXT_SET_FLOW_FORMAT = 12, /* Set flow format. */ - NXT_FLOW_MOD = 13, /* Analogous to OFPT_FLOW_MOD. */ - NXT_FLOW_REMOVED = 14, /* Analogous to OFPT_FLOW_REMOVED. */ - - /* Use the upper 8 bits of the 'command' member in struct ofp_flow_mod to - * designate the table to which a flow is to be added? See the big comment - * on struct nxt_flow_mod_table_id for more information. */ - NXT_FLOW_MOD_TABLE_ID = 15 -}; - -/* Header for Nicira vendor stats request and reply messages. */ -struct nicira_stats_msg { - struct ofp_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */ +/* Header for Nicira vendor stats request and reply messages in OpenFlow + * 1.0. */ +struct nicira10_stats_msg { + struct ofp10_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */ ovs_be32 subtype; /* One of NXST_* below. */ uint8_t pad[4]; /* Align to 64-bits. */ }; -OFP_ASSERT(sizeof(struct nicira_stats_msg) == 24); +OFP_ASSERT(sizeof(struct nicira10_stats_msg) == 24); -/* Values for the 'subtype' member of struct nicira_stats_msg. */ -enum nicira_stats_type { - /* Flexible flow specification (aka NXM = Nicira Extended Match). */ - NXST_FLOW, /* Analogous to OFPST_FLOW. */ - NXST_AGGREGATE /* Analogous to OFPST_AGGREGATE. */ +/* Header for Nicira vendor stats request and reply messages in OpenFlow + * 1.1. */ +struct nicira11_stats_msg { + struct ofp11_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */ + ovs_be32 subtype; /* One of NXST_* below. */ }; +OFP_ASSERT(sizeof(struct nicira11_stats_msg) == 24); /* Fields to use when hashing flows. */ enum nx_hash_fields { @@ -189,12 +115,14 @@ enum nx_hash_fields { /* This command enables or disables an Open vSwitch extension that allows a * controller to specify the OpenFlow table to which a flow should be added, * instead of having the switch decide which table is most appropriate as - * required by OpenFlow 1.0. By default, the extension is disabled. + * required by OpenFlow 1.0. Because NXM was designed as an extension to + * OpenFlow 1.0, the extension applies equally to ofp10_flow_mod and + * nx_flow_mod. By default, the extension is disabled. * - * When this feature is enabled, Open vSwitch treats struct ofp_flow_mod's - * 16-bit 'command' member as two separate fields. The upper 8 bits are used - * as the table ID, the lower 8 bits specify the command as usual. A table ID - * of 0xff is treated like a wildcarded table ID. + * When this feature is enabled, Open vSwitch treats struct ofp10_flow_mod's + * and struct nx_flow_mod's 16-bit 'command' member as two separate fields. + * The upper 8 bits are used as the table ID, the lower 8 bits specify the + * command as usual. A table ID of 0xff is treated like a wildcarded table ID. * * The specific treatment of the table ID depends on the type of flow mod: * @@ -202,10 +130,9 @@ enum nx_hash_fields { * table. If an identical flow already exists in that table only, then it * is replaced. If the flow cannot be placed in the specified table, * either because the table is full or because the table cannot support - * flows of the given type, the switch replies with an - * OFPFMFC_ALL_TABLES_FULL error. (A controller can distinguish these - * cases by comparing the current and maximum number of entries reported - * in ofp_table_stats.) + * flows of the given type, the switch replies with an OFPFMFC_TABLE_FULL + * error. (A controller can distinguish these cases by comparing the + * current and maximum number of entries reported in ofp_table_stats.) * * If the table ID is wildcarded, the switch picks an appropriate table * itself. If an identical flow already exist in the selected flow table, @@ -224,14 +151,79 @@ enum nx_hash_fields { * matches, then it is modified or deleted; if flows in more than one * table match, then none is modified or deleted. */ -struct nxt_flow_mod_table_id { - struct ofp_header header; - uint32_t vendor; /* NX_VENDOR_ID. */ - uint32_t subtype; /* NXT_FLOW_MOD_TABLE_ID. */ +struct nx_flow_mod_table_id { uint8_t set; /* Nonzero to enable, zero to disable. */ uint8_t pad[7]; }; -OFP_ASSERT(sizeof(struct nxt_flow_mod_table_id) == 24); +OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 8); + +enum nx_packet_in_format { + NXPIF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */ + NXPIF_NXM = 1 /* Nicira Extended. */ +}; + +/* NXT_SET_PACKET_IN_FORMAT request. */ +struct nx_set_packet_in_format { + ovs_be32 format; /* One of NXPIF_*. */ +}; +OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 4); + +/* NXT_PACKET_IN (analogous to OFPT_PACKET_IN). + * + * NXT_PACKET_IN is similar to the OpenFlow 1.2 OFPT_PACKET_IN. The + * differences are: + * + * - NXT_PACKET_IN includes the cookie of the rule that triggered the + * message. (OpenFlow 1.3 OFPT_PACKET_IN also includes the cookie.) + * + * - The metadata fields use NXM (instead of OXM) field numbers. + * + * Open vSwitch 1.9.0 and later omits metadata fields that are zero (as allowed + * by OpenFlow 1.2). Earlier versions included all implemented metadata + * fields. + * + * Open vSwitch does not include non-metadata in the nx_match, because by + * definition that information can be found in the packet itself. The format + * and the standards allow this, however, so controllers should be prepared to + * tolerate future changes. + * + * The NXM format is convenient for reporting metadata values, but it is + * important not to interpret the format as matching against a flow, because it + * does not. Nothing is being matched; arbitrary metadata masks would not be + * meaningful. + * + * Whereas in most cases a controller can expect to only get back NXM fields + * that it set up itself (e.g. flow dumps will ordinarily report only NXM + * fields from flows that the controller added), NXT_PACKET_IN messages might + * contain fields that the controller does not understand, because the switch + * might support fields (new registers, new protocols, etc.) that the + * controller does not. The controller must prepared to tolerate these. + * + * The 'cookie' field has no meaning when 'reason' is OFPR_NO_MATCH. In this + * case it should be UINT64_MAX. */ +struct nx_packet_in { + ovs_be32 buffer_id; /* ID assigned by datapath. */ + ovs_be16 total_len; /* Full length of frame. */ + uint8_t reason; /* Reason packet is sent (one of OFPR_*). */ + uint8_t table_id; /* ID of the table that was looked up. */ + ovs_be64 cookie; /* Cookie of the rule that was looked up. */ + ovs_be16 match_len; /* Size of nx_match. */ + uint8_t pad[6]; /* Align to 64-bits. */ + /* Followed by: + * - Exactly match_len (possibly 0) bytes containing the nx_match, then + * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of + * all-zero bytes, then + * - Exactly 2 all-zero padding bytes, then + * - An Ethernet frame whose length is inferred from nxh.header.length. + * + * The padding bytes preceding the Ethernet frame ensure that the IP + * header (if any) following the Ethernet header is 32-bit aligned. */ + + /* uint8_t nxm_fields[...]; */ /* NXM headers. */ + /* uint8_t pad[2]; */ /* Align to 64 bit + 16 bit. */ + /* uint8_t data[0]; */ /* Ethernet frame. */ +}; +OFP_ASSERT(sizeof(struct nx_packet_in) == 24); /* Configures the "role" of the sending controller. The default role is: * @@ -253,15 +245,39 @@ OFP_ASSERT(sizeof(struct nxt_flow_mod_table_id) == 24); * messages, but they do receive OFPT_PORT_STATUS messages. */ struct nx_role_request { - struct nicira_header nxh; ovs_be32 role; /* One of NX_ROLE_*. */ }; +OFP_ASSERT(sizeof(struct nx_role_request) == 4); enum nx_role { NX_ROLE_OTHER, /* Default role, full access. */ NX_ROLE_MASTER, /* Full access, at most one. */ NX_ROLE_SLAVE /* Read-only access. */ }; + +/* NXT_SET_ASYNC_CONFIG. + * + * Sent by a controller, this message configures the asynchronous messages that + * the controller wants to receive. Element 0 in each array specifies messages + * of interest when the controller has an "other" or "master" role; element 1, + * when the controller has a "slave" role. + * + * Each array element is a bitmask in which a 0-bit disables receiving a + * particular message and a 1-bit enables receiving it. Each bit controls the + * message whose 'reason' corresponds to the bit index. For example, the bit + * with value 1<<2 == 4 in port_status_mask[1] determines whether the + * controller will receive OFPT_PORT_STATUS messages with reason OFPPR_MODIFY + * (value 2) when the controller has a "slave" role. + * + * As a side effect, for service controllers, this message changes the + * miss_send_len from default of zero to OFP_DEFAULT_MISS_SEND_LEN (128). + */ +struct nx_async_config { + ovs_be32 packet_in_mask[2]; /* Bitmasks of OFPR_* values. */ + ovs_be32 port_status_mask[2]; /* Bitmasks of OFPRR_* values. */ + ovs_be32 flow_removed_mask[2]; /* Bitmasks of OFPPR_* values. */ +}; +OFP_ASSERT(sizeof(struct nx_async_config) == 24); /* Nicira vendor flow actions. */ @@ -277,9 +293,27 @@ enum nx_action_subtype { NXAST_NOTE, /* struct nx_action_note */ NXAST_SET_TUNNEL64, /* struct nx_action_set_tunnel64 */ NXAST_MULTIPATH, /* struct nx_action_multipath */ - NXAST_AUTOPATH, /* struct nx_action_autopath */ + NXAST_AUTOPATH__OBSOLETE, /* No longer used. */ NXAST_BUNDLE, /* struct nx_action_bundle */ - NXAST_BUNDLE_LOAD /* struct nx_action_bundle */ + NXAST_BUNDLE_LOAD, /* struct nx_action_bundle */ + NXAST_RESUBMIT_TABLE, /* struct nx_action_resubmit */ + NXAST_OUTPUT_REG, /* struct nx_action_output_reg */ + NXAST_LEARN, /* struct nx_action_learn */ + NXAST_EXIT, /* struct nx_action_header */ + NXAST_DEC_TTL, /* struct nx_action_header */ + NXAST_FIN_TIMEOUT, /* struct nx_action_fin_timeout */ + NXAST_CONTROLLER, /* struct nx_action_controller */ + NXAST_DEC_TTL_CNT_IDS, /* struct nx_action_cnt_ids */ + NXAST_WRITE_METADATA, /* struct nx_action_write_metadata */ + NXAST_PUSH_MPLS, /* struct nx_action_push_mpls */ + NXAST_POP_MPLS, /* struct nx_action_pop_mpls */ + NXAST_SET_MPLS_TTL, /* struct nx_action_ttl */ + NXAST_DEC_MPLS_TTL, /* struct nx_action_header */ + NXAST_STACK_PUSH, /* struct nx_action_stack */ + NXAST_STACK_POP, /* struct nx_action_stack */ + NXAST_SAMPLE, /* struct nx_action_sample */ + NXAST_SET_MPLS_LABEL, /* struct nx_action_ttl */ + NXAST_SET_MPLS_TC, /* struct nx_action_ttl */ }; /* Header for Nicira-defined actions. */ @@ -292,31 +326,51 @@ struct nx_action_header { }; OFP_ASSERT(sizeof(struct nx_action_header) == 16); -/* Action structure for NXAST_RESUBMIT. +/* Action structures for NXAST_RESUBMIT and NXAST_RESUBMIT_TABLE. + * + * These actions search one of the switch's flow tables: + * + * - For NXAST_RESUBMIT_TABLE only, if the 'table' member is not 255, then + * it specifies the table to search. * - * NXAST_RESUBMIT searches the flow table again, using a flow that is slightly - * modified from the original lookup: + * - Otherwise (for NXAST_RESUBMIT_TABLE with a 'table' of 255, or for + * NXAST_RESUBMIT regardless of 'table'), it searches the current flow + * table, that is, the OpenFlow flow table that contains the flow from + * which this action was obtained. If this action did not come from a + * flow table (e.g. it came from an OFPT_PACKET_OUT message), then table 0 + * is the current table. * - * - The 'in_port' member of struct nx_action_resubmit is used as the flow's - * in_port. + * The flow table lookup uses a flow that may be slightly modified from the + * original lookup: * - * - If NXAST_RESUBMIT is preceded by actions that affect the flow - * (e.g. OFPAT_SET_VLAN_VID), then the flow is updated with the new - * values. + * - For NXAST_RESUBMIT, the 'in_port' member of struct nx_action_resubmit + * is used as the flow's in_port. + * + * - For NXAST_RESUBMIT_TABLE, if the 'in_port' member is not OFPP_IN_PORT, + * then its value is used as the flow's in_port. Otherwise, the original + * in_port is used. + * + * - If actions that modify the flow (e.g. OFPAT_SET_VLAN_VID) precede the + * resubmit action, then the flow is updated with the new values. * * Following the lookup, the original in_port is restored. * * If the modified flow matched in the flow table, then the corresponding - * actions are executed. Afterward, actions following NXAST_RESUBMIT in the + * actions are executed. Afterward, actions following the resubmit in the * original set of actions, if any, are executed; any changes made to the * packet (e.g. changes to VLAN) by secondary actions persist when those * actions are executed, although the original in_port is restored. * - * NXAST_RESUBMIT may be used any number of times within a set of actions. + * Resubmit actions may be used any number of times within a set of actions. + * + * Resubmit actions may nest to an implementation-defined depth. Beyond this + * implementation-defined depth, further resubmit actions are simply ignored. * - * NXAST_RESUBMIT may nest to an implementation-defined depth. Beyond this - * implementation-defined depth, further NXAST_RESUBMIT actions are simply - * ignored. (Open vSwitch 1.0.1 and earlier did not support recursion.) + * NXAST_RESUBMIT ignores 'table' and 'pad'. NXAST_RESUBMIT_TABLE requires + * 'pad' to be all-bits-zero. + * + * Open vSwitch 1.0.1 and earlier did not support recursion. Open vSwitch + * before 1.2.90 did not support NXAST_RESUBMIT_TABLE. */ struct nx_action_resubmit { ovs_be16 type; /* OFPAT_VENDOR. */ @@ -324,7 +378,8 @@ struct nx_action_resubmit { ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_RESUBMIT. */ ovs_be16 in_port; /* New in_port for checking flow table. */ - uint8_t pad[4]; + uint8_t table; /* NXAST_RESUBMIT_TABLE: table to use. */ + uint8_t pad[3]; }; OFP_ASSERT(sizeof(struct nx_action_resubmit) == 16); @@ -347,7 +402,7 @@ OFP_ASSERT(sizeof(struct nx_action_set_tunnel) == 16); * Sets the encapsulating tunnel ID to a 64-bit value. */ struct nx_action_set_tunnel64 { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 16. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_SET_TUNNEL64. */ uint8_t pad[6]; @@ -424,19 +479,45 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); * - NXM_NX_ND_SLL * - NXM_NX_ND_TLL * - NXM_NX_REG(idx) for idx in the switch's accepted range. + * - NXM_NX_PKT_MARK + * - NXM_NX_TUN_IPV4_SRC + * - NXM_NX_TUN_IPV4_DST * * The following nxm_header values are potentially acceptable as 'dst': * + * - NXM_OF_ETH_DST + * - NXM_OF_ETH_SRC + * - NXM_OF_IP_TOS + * - NXM_OF_IP_SRC + * - NXM_OF_IP_DST + * - NXM_OF_TCP_SRC + * - NXM_OF_TCP_DST + * - NXM_OF_UDP_SRC + * - NXM_OF_UDP_DST + * - NXM_NX_ARP_SHA + * - NXM_NX_ARP_THA + * - NXM_OF_ARP_OP + * - NXM_OF_ARP_SPA + * - NXM_OF_ARP_TPA + * Modifying any of the above fields changes the corresponding packet + * header. + * + * - NXM_OF_IN_PORT + * * - NXM_NX_REG(idx) for idx in the switch's accepted range. * + * - NXM_NX_PKT_MARK + * * - NXM_OF_VLAN_TCI. Modifying this field's value has side effects on the * packet's 802.1Q header. Setting a value with CFI=0 removes the 802.1Q * header (if any), ignoring the other bits. Setting a value with CFI=1 * adds or modifies the 802.1Q header appropriately, setting the TCI field * to the field's new value (with the CFI bit masked out). * - * - NXM_NX_TUN_ID. Modifying this value modifies the tunnel ID used for the - * packet's next tunnel encapsulation. + * - NXM_NX_TUN_ID, NXM_NX_TUN_IPV4_SRC, NXM_NX_TUN_IPV4_DST. Modifying + * any of these values modifies the corresponding tunnel header field used + * for the packet's next tunnel encapsulation, if allowed by the + * configuration of the output tunnel port. * * A given nxm_header value may be used as 'src' or 'dst' only on a flow whose * nx_match satisfies its prerequisites. For example, NXM_OF_IP_TOS may be @@ -446,10 +527,14 @@ OFP_ASSERT(sizeof(struct nx_action_pop_queue) == 16); * The switch will reject actions for which src_ofs+n_bits is greater than the * width of 'src' or dst_ofs+n_bits is greater than the width of 'dst' with * error type OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT. + * + * This action behaves properly when 'src' overlaps with 'dst', that is, it + * behaves as if 'src' were copied out to a temporary buffer, then the + * temporary buffer copied to 'dst'. */ struct nx_action_reg_move { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 16. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_REG_MOVE. */ ovs_be16 n_bits; /* Number of bits. */ @@ -488,7 +573,7 @@ OFP_ASSERT(sizeof(struct nx_action_reg_move) == 24); */ struct nx_action_reg_load { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 16. */ + ovs_be16 len; /* Length is 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ ovs_be16 subtype; /* NXAST_REG_LOAD. */ ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ @@ -497,6 +582,23 @@ struct nx_action_reg_load { }; OFP_ASSERT(sizeof(struct nx_action_reg_load) == 24); +/* Action structure for NXAST_STACK_PUSH and NXAST_STACK_POP. + * + * Pushes (or pops) field[offset: offset + n_bits] to (or from) + * top of the stack. + */ +struct nx_action_stack { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_STACK_PUSH or NXAST_STACK_POP. */ + ovs_be16 offset; /* Bit offset into the field. */ + ovs_be32 field; /* The field used for push or pop. */ + ovs_be16 n_bits; /* (n_bits + 1) bits of the field. */ + uint8_t zero[6]; /* Reserved, must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_stack) == 24); + /* Action structure for NXAST_NOTE. * * This action has no effect. It is variable length. The switch does not @@ -621,49 +723,265 @@ enum nx_mp_algorithm { NX_MP_ALG_ITER_HASH /* Iterative Hash. */ }; -/* Action structure for NXAST_AUTOPATH. - * - * This action performs the following steps in sequence: - * - * 1. Hashes the flow using an implementation-defined hash function. - * - * The hashed fields' values are drawn from the current state of the - * flow, including all modifications that have been made by actions up to - * this point. - * - * 2. Selects an OpenFlow 'port'. - * - * 'port' is selected in an implementation-defined manner, taking into - * account 'id' and the hash value calculated in step 1. - * - * Generally a switch will have been configured with a set of ports that - * may be chosen given 'id'. The switch may take into account any number - * of factors when choosing 'port' from its configured set. Factors may - * include carrier, load, and the results of configuration protocols such - * as LACP. - * - * 3. Stores 'port' in dst[ofs:ofs+n_bits]. - * - * The format and semantics of 'dst' and 'ofs_nbits' are similar to those - * for the NXAST_REG_LOAD action. - * - * The switch will reject actions in which ofs+n_bits is greater than the width - * of 'dst', with error type OFPET_BAD_ACTION, code OFPBAC_BAD_ARGUMENT. +/* Action structure for NXAST_LEARN. + * + * This action adds or modifies a flow in an OpenFlow table, similar to + * OFPT_FLOW_MOD with OFPFC_MODIFY_STRICT as 'command'. The new flow has the + * specified idle timeout, hard timeout, priority, cookie, and flags. The new + * flow's match criteria and actions are built by applying each of the series + * of flow_mod_spec elements included as part of the action. + * + * A flow_mod_spec starts with a 16-bit header. A header that is all-bits-0 is + * a no-op used for padding the action as a whole to a multiple of 8 bytes in + * length. Otherwise, the flow_mod_spec can be thought of as copying 'n_bits' + * bits from a source to a destination. In this case, the header contains + * multiple fields: + * + * 15 14 13 12 11 10 0 + * +------+---+------+---------------------------------+ + * | 0 |src| dst | n_bits | + * +------+---+------+---------------------------------+ + * + * The meaning and format of a flow_mod_spec depends on 'src' and 'dst'. The + * following table summarizes the meaning of each possible combination. + * Details follow the table: + * + * src dst meaning + * --- --- ---------------------------------------------------------- + * 0 0 Add match criteria based on value in a field. + * 1 0 Add match criteria based on an immediate value. + * 0 1 Add NXAST_REG_LOAD action to copy field into a different field. + * 1 1 Add NXAST_REG_LOAD action to load immediate value into a field. + * 0 2 Add OFPAT_OUTPUT action to output to port from specified field. + * All other combinations are undefined and not allowed. + * + * The flow_mod_spec header is followed by a source specification and a + * destination specification. The format and meaning of the source + * specification depends on 'src': + * + * - If 'src' is 0, the source bits are taken from a field in the flow to + * which this action is attached. (This should be a wildcarded field. If + * its value is fully specified then the source bits being copied have + * constant values.) + * + * The source specification is an ovs_be32 'field' and an ovs_be16 'ofs'. + * 'field' is an nxm_header with nxm_hasmask=0, and 'ofs' the starting bit + * offset within that field. The source bits are field[ofs:ofs+n_bits-1]. + * 'field' and 'ofs' are subject to the same restrictions as the source + * field in NXAST_REG_MOVE. + * + * - If 'src' is 1, the source bits are a constant value. The source + * specification is (n_bits+15)/16*2 bytes long. Taking those bytes as a + * number in network order, the source bits are the 'n_bits' + * least-significant bits. The switch will report an error if other bits + * in the constant are nonzero. + * + * The flow_mod_spec destination specification, for 'dst' of 0 or 1, is an + * ovs_be32 'field' and an ovs_be16 'ofs'. 'field' is an nxm_header with + * nxm_hasmask=0 and 'ofs' is a starting bit offset within that field. The + * meaning of the flow_mod_spec depends on 'dst': + * + * - If 'dst' is 0, the flow_mod_spec specifies match criteria for the new + * flow. The new flow matches only if bits field[ofs:ofs+n_bits-1] in a + * packet equal the source bits. 'field' may be any nxm_header with + * nxm_hasmask=0 that is allowed in NXT_FLOW_MOD. + * + * Order is significant. Earlier flow_mod_specs must satisfy any + * prerequisites for matching fields specified later, by copying constant + * values into prerequisite fields. + * + * The switch will reject flow_mod_specs that do not satisfy NXM masking + * restrictions. + * + * - If 'dst' is 1, the flow_mod_spec specifies an NXAST_REG_LOAD action for + * the new flow. The new flow copies the source bits into + * field[ofs:ofs+n_bits-1]. Actions are executed in the same order as the + * flow_mod_specs. + * + * A single NXAST_REG_LOAD action writes no more than 64 bits, so n_bits + * greater than 64 yields multiple NXAST_REG_LOAD actions. + * + * The flow_mod_spec destination spec for 'dst' of 2 (when 'src' is 0) is + * empty. It has the following meaning: + * + * - The flow_mod_spec specifies an OFPAT_OUTPUT action for the new flow. + * The new flow outputs to the OpenFlow port specified by the source field. + * Of the special output ports with value OFPP_MAX or larger, OFPP_IN_PORT, + * OFPP_FLOOD, OFPP_LOCAL, and OFPP_ALL are supported. Other special ports + * may not be used. + * + * Resource Management + * ------------------- + * + * A switch has a finite amount of flow table space available for learning. + * When this space is exhausted, no new learning table entries will be learned + * until some existing flow table entries expire. The controller should be + * prepared to handle this by flooding (which can be implemented as a + * low-priority flow). + * + * If a learned flow matches a single TCP stream with a relatively long + * timeout, one may make the best of resource constraints by setting + * 'fin_idle_timeout' or 'fin_hard_timeout' (both measured in seconds), or + * both, to shorter timeouts. When either of these is specified as a nonzero + * value, OVS adds a NXAST_FIN_TIMEOUT action, with the specified timeouts, to + * the learned flow. + * + * Examples + * -------- + * + * The following examples give a prose description of the flow_mod_specs along + * with informal notation for how those would be represented and a hex dump of + * the bytes that would be required. + * + * These examples could work with various nx_action_learn parameters. Typical + * values would be idle_timeout=OFP_FLOW_PERMANENT, hard_timeout=60, + * priority=OFP_DEFAULT_PRIORITY, flags=0, table_id=10. + * + * 1. Learn input port based on the source MAC, with lookup into + * NXM_NX_REG1[16:31] by resubmit to in_port=99: + * + * Match on in_port=99: + * ovs_be16(src=1, dst=0, n_bits=16), 20 10 + * ovs_be16(99), 00 63 + * ovs_be32(NXM_OF_IN_PORT), ovs_be16(0) 00 00 00 02 00 00 + * + * Match Ethernet destination on Ethernet source from packet: + * ovs_be16(src=0, dst=0, n_bits=48), 00 30 + * ovs_be32(NXM_OF_ETH_SRC), ovs_be16(0) 00 00 04 06 00 00 + * ovs_be32(NXM_OF_ETH_DST), ovs_be16(0) 00 00 02 06 00 00 + * + * Set NXM_NX_REG1[16:31] to the packet's input port: + * ovs_be16(src=0, dst=1, n_bits=16), 08 10 + * ovs_be32(NXM_OF_IN_PORT), ovs_be16(0) 00 00 00 02 00 00 + * ovs_be32(NXM_NX_REG1), ovs_be16(16) 00 01 02 04 00 10 + * + * Given a packet that arrived on port A with Ethernet source address B, + * this would set up the flow "in_port=99, dl_dst=B, + * actions=load:A->NXM_NX_REG1[16..31]". + * + * In syntax accepted by ovs-ofctl, this action is: learn(in_port=99, + * NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], + * load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31]) + * + * 2. Output to input port based on the source MAC and VLAN VID, with lookup + * into NXM_NX_REG1[16:31]: + * + * Match on same VLAN ID as packet: + * ovs_be16(src=0, dst=0, n_bits=12), 00 0c + * ovs_be32(NXM_OF_VLAN_TCI), ovs_be16(0) 00 00 08 02 00 00 + * ovs_be32(NXM_OF_VLAN_TCI), ovs_be16(0) 00 00 08 02 00 00 + * + * Match Ethernet destination on Ethernet source from packet: + * ovs_be16(src=0, dst=0, n_bits=48), 00 30 + * ovs_be32(NXM_OF_ETH_SRC), ovs_be16(0) 00 00 04 06 00 00 + * ovs_be32(NXM_OF_ETH_DST), ovs_be16(0) 00 00 02 06 00 00 + * + * Output to the packet's input port: + * ovs_be16(src=0, dst=2, n_bits=16), 10 10 + * ovs_be32(NXM_OF_IN_PORT), ovs_be16(0) 00 00 00 02 00 00 + * + * Given a packet that arrived on port A with Ethernet source address B in + * VLAN C, this would set up the flow "dl_dst=B, vlan_vid=C, + * actions=output:A". + * + * In syntax accepted by ovs-ofctl, this action is: + * learn(NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], + * output:NXM_OF_IN_PORT[]) + * + * 3. Here's a recipe for a very simple-minded MAC learning switch. It uses a + * 10-second MAC expiration time to make it easier to see what's going on + * + * ovs-vsctl del-controller br0 + * ovs-ofctl del-flows br0 + * ovs-ofctl add-flow br0 "table=0 actions=learn(table=1, \ + hard_timeout=10, NXM_OF_VLAN_TCI[0..11], \ + NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], \ + output:NXM_OF_IN_PORT[]), resubmit(,1)" + * ovs-ofctl add-flow br0 "table=1 priority=0 actions=flood" + * + * You can then dump the MAC learning table with: + * + * ovs-ofctl dump-flows br0 table=1 + * + * Usage Advice + * ------------ + * + * For best performance, segregate learned flows into a table that is not used + * for any other flows except possibly for a lowest-priority "catch-all" flow + * (a flow with no match criteria). If different learning actions specify + * different match criteria, use different tables for the learned flows. + * + * The meaning of 'hard_timeout' and 'idle_timeout' can be counterintuitive. + * These timeouts apply to the flow that is added, which means that a flow with + * an idle timeout will expire when no traffic has been sent *to* the learned + * address. This is not usually the intent in MAC learning; instead, we want + * the MAC learn entry to expire when no traffic has been sent *from* the + * learned address. Use a hard timeout for that. */ -struct nx_action_autopath { +struct nx_action_learn { ovs_be16 type; /* OFPAT_VENDOR. */ - ovs_be16 len; /* Length is 20. */ + ovs_be16 len; /* At least 24. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ - ovs_be16 subtype; /* NXAST_AUTOPATH. */ - - /* Where to store the result. */ - ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ - ovs_be32 dst; /* Destination. */ - - ovs_be32 id; /* Autopath ID. */ - ovs_be32 pad; + ovs_be16 subtype; /* NXAST_LEARN. */ + ovs_be16 idle_timeout; /* Idle time before discarding (seconds). */ + ovs_be16 hard_timeout; /* Max time before discarding (seconds). */ + ovs_be16 priority; /* Priority level of flow entry. */ + ovs_be64 cookie; /* Cookie for new flow. */ + ovs_be16 flags; /* Either 0 or OFPFF_SEND_FLOW_REM. */ + uint8_t table_id; /* Table to insert flow entry. */ + uint8_t pad; /* Must be zero. */ + ovs_be16 fin_idle_timeout; /* Idle timeout after FIN, if nonzero. */ + ovs_be16 fin_hard_timeout; /* Hard timeout after FIN, if nonzero. */ + /* Followed by a sequence of flow_mod_spec elements, as described above, + * until the end of the action is reached. */ +}; +OFP_ASSERT(sizeof(struct nx_action_learn) == 32); + +#define NX_LEARN_N_BITS_MASK 0x3ff + +#define NX_LEARN_SRC_FIELD (0 << 13) /* Copy from field. */ +#define NX_LEARN_SRC_IMMEDIATE (1 << 13) /* Copy from immediate value. */ +#define NX_LEARN_SRC_MASK (1 << 13) + +#define NX_LEARN_DST_MATCH (0 << 11) /* Add match criterion. */ +#define NX_LEARN_DST_LOAD (1 << 11) /* Add NXAST_REG_LOAD action. */ +#define NX_LEARN_DST_OUTPUT (2 << 11) /* Add OFPAT_OUTPUT action. */ +#define NX_LEARN_DST_RESERVED (3 << 11) /* Not yet defined. */ +#define NX_LEARN_DST_MASK (3 << 11) + +/* Action structure for NXAST_FIN_TIMEOUT. + * + * This action changes the idle timeout or hard timeout, or both, of this + * OpenFlow rule when the rule matches a TCP packet with the FIN or RST flag. + * When such a packet is observed, the action reduces the rule's idle timeout + * to 'fin_idle_timeout' and its hard timeout to 'fin_hard_timeout'. This + * action has no effect on an existing timeout that is already shorter than the + * one that the action specifies. A 'fin_idle_timeout' or 'fin_hard_timeout' + * of zero has no effect on the respective timeout. + * + * 'fin_idle_timeout' and 'fin_hard_timeout' are measured in seconds. + * 'fin_hard_timeout' specifies time since the flow's creation, not since the + * receipt of the FIN or RST. + * + * This is useful for quickly discarding learned TCP flows that otherwise will + * take a long time to expire. + * + * This action is intended for use with an OpenFlow rule that matches only a + * single TCP flow. If the rule matches multiple TCP flows (e.g. it wildcards + * all TCP traffic, or all TCP traffic to a particular port), then any FIN or + * RST in any of those flows will cause the entire OpenFlow rule to expire + * early, which is not normally desirable. + */ +struct nx_action_fin_timeout { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_FIN_TIMEOUT. */ + ovs_be16 fin_idle_timeout; /* New idle timeout, if nonzero. */ + ovs_be16 fin_hard_timeout; /* New hard timeout, if nonzero. */ + ovs_be16 pad; /* Must be zero. */ }; -OFP_ASSERT(sizeof(struct nx_action_autopath) == 24); +OFP_ASSERT(sizeof(struct nx_action_fin_timeout) == 16); /* Action structure for NXAST_BUNDLE and NXAST_BUNDLE_LOAD. * @@ -686,6 +1004,13 @@ OFP_ASSERT(sizeof(struct nx_action_autopath) == 24); * slave. If the switch does not support the specified 'algorithm' parameter, * it should reject the action. * + * Several algorithms take into account liveness when selecting slaves. The + * liveness of a slave is implementation defined (with one exception), but will + * generally take into account things like its carrier status and the results + * of any link monitoring protocols which happen to be running on it. In order + * to give controllers a place-holder value, the OFPP_NONE port is always + * considered live. + * * Some slave selection strategies require the use of a hash function, in which * case the 'fields' and 'basis' parameters should be populated. The 'fields' * parameter (one of NX_HASH_FIELDS_*) designates which parts of the flow to @@ -707,13 +1032,13 @@ struct nx_action_bundle { ovs_be16 type; /* OFPAT_VENDOR. */ ovs_be16 len; /* Length including slaves. */ ovs_be32 vendor; /* NX_VENDOR_ID. */ - ovs_be16 subtype; /* NXAST_BUNDLE. */ + ovs_be16 subtype; /* NXAST_BUNDLE or NXAST_BUNDLE_LOAD. */ /* Slave choice algorithm to apply to hash value. */ ovs_be16 algorithm; /* One of NX_BD_ALG_*. */ /* What fields to hash and how. */ - ovs_be16 fields; /* One of NX_BD_FIELDS_*. */ + ovs_be16 fields; /* One of NX_HASH_FIELDS_*. */ ovs_be16 basis; /* Universal hash parameter. */ ovs_be32 slave_type; /* NXM_OF_IN_PORT. */ @@ -746,14 +1071,85 @@ enum nx_bd_algorithm { * Uses the 'fields' and 'basis' parameters. */ NX_BD_ALG_HRW /* Highest Random Weight. */ }; + + +/* Action structure for NXAST_DEC_TTL_CNT_IDS. + * + * If the packet is not IPv4 or IPv6, does nothing. For IPv4 or IPv6, if the + * TTL or hop limit is at least 2, decrements it by 1. Otherwise, if TTL or + * hop limit is 0 or 1, sends a packet-in to the controllers with each of the + * 'n_controllers' controller IDs specified in 'cnt_ids'. + * + * (This differs from NXAST_DEC_TTL in that for NXAST_DEC_TTL the packet-in is + * sent only to controllers with id 0.) + */ +struct nx_action_cnt_ids { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length including slaves. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_DEC_TTL_CNT_IDS. */ + + ovs_be16 n_controllers; /* Number of controllers. */ + uint8_t zeros[4]; /* Must be zero. */ + + /* Followed by 1 or more controller ids. + * + * uint16_t cnt_ids[]; // Controller ids. + * uint8_t pad[]; // Must be 0 to 8-byte align cnt_ids[]. + */ +}; +OFP_ASSERT(sizeof(struct nx_action_cnt_ids) == 16); + + +/* Action structure for NXAST_OUTPUT_REG. + * + * Outputs to the OpenFlow port number written to src[ofs:ofs+nbits]. + * + * The format and semantics of 'src' and 'ofs_nbits' are similar to those for + * the NXAST_REG_LOAD action. + * + * The acceptable nxm_header values for 'src' are the same as the acceptable + * nxm_header values for the 'src' field of NXAST_REG_MOVE. + * + * The 'max_len' field indicates the number of bytes to send when the chosen + * port is OFPP_CONTROLLER. Its semantics are equivalent to the 'max_len' + * field of OFPAT_OUTPUT. + * + * The 'zero' field is required to be zeroed for forward compatibility. */ +struct nx_action_output_reg { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* 24. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_OUTPUT_REG. */ + + ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */ + ovs_be32 src; /* Source. */ + + ovs_be16 max_len; /* Max length to send to controller. */ + + uint8_t zero[6]; /* Reserved, must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_output_reg) == 24); + +/* NXAST_EXIT + * + * Discontinues action processing. + * + * The NXAST_EXIT action causes the switch to immediately halt processing + * actions for the flow. Any actions which have already been processed are + * executed by the switch. However, any further actions, including those which + * may be in different tables, or different levels of the NXAST_RESUBMIT + * hierarchy, will be ignored. + * + * Uses the nx_action_header structure. */ /* Flexible flow specifications (aka NXM = Nicira Extended Match). * - * OpenFlow 1.0 has "struct ofp_match" for specifying flow matches. This + * OpenFlow 1.0 has "struct ofp10_match" for specifying flow matches. This * structure is fixed-length and hence difficult to extend. This section * describes a more flexible, variable-length flow match, called "nx_match" for * short, that is also supported by Open vSwitch. This section also defines a - * replacement for each OpenFlow message that includes struct ofp_match. + * replacement for each OpenFlow message that includes struct ofp10_match. * * * Format @@ -809,9 +1205,10 @@ enum nx_bd_algorithm { * value, called "nxm_mask". For each 1-bit in position J in nxm_mask, the * nx_match matches only packets for which bit J in the given field's value * matches bit J in nxm_value. A 0-bit in nxm_mask causes the - * corresponding bits in nxm_value and the field's value to be ignored. - * (The sense of the nxm_mask bits is the opposite of that used by the - * "wildcards" member of struct ofp_match.) + * corresponding bit in nxm_value is ignored (it should be 0; Open vSwitch + * may enforce this someday), as is the corresponding bit in the field's + * value. (The sense of the nxm_mask bits is the opposite of that used by + * the "wildcards" member of struct ofp10_match.) * * When nxm_hasmask is 1, nxm_length is always even. * @@ -854,12 +1251,12 @@ enum nx_bd_algorithm { * and nxm_value=0x0800. That is, matching on the IP source address is * allowed only if the Ethernet type is explicitly set to IP. * - * - An nxm_entry for nxm_type=NXM_OF_TCP_SRC is allowed only if it is preced - * by an entry with nxm_type=NXM_OF_ETH_TYPE, nxm_hasmask=0, - * nxm_value=0x0800 and another with nxm_type=NXM_OF_IP_PROTO, - * nxm_hasmask=0, nxm_value=6, in that order. That is, matching on the TCP - * source port is allowed only if the Ethernet type is IP and the IP - * protocol is TCP. + * - An nxm_entry for nxm_type=NXM_OF_TCP_SRC is allowed only if it is + * preceded by an entry with nxm_type=NXM_OF_ETH_TYPE, nxm_hasmask=0, and + * nxm_value either 0x0800 or 0x86dd, and another with + * nxm_type=NXM_OF_IP_PROTO, nxm_hasmask=0, nxm_value=6, in that order. + * That is, matching on the TCP source port is allowed only if the Ethernet + * type is IP or IPv6 and the IP protocol is TCP. * * These restrictions should be noted in specifications for individual fields. * A switch may implement relaxed versions of these restrictions. A switch @@ -884,7 +1281,7 @@ enum nx_bd_algorithm { * numbers and byte indexes. * * - * 8-bit nxm_value, nxm_hasmask=1, nxm_length=1: + * 8-bit nxm_value, nxm_hasmask=1, nxm_length=2: * * 0 3 4 5 * +------------+---+---+ @@ -968,13 +1365,13 @@ enum nx_bd_algorithm { * * Format: 48-bit Ethernet MAC address. * - * Masking: The nxm_mask patterns 01:00:00:00:00:00 and FE:FF:FF:FF:FF:FF must - * be supported for NXM_OF_ETH_DST_W (as well as the trivial patterns that - * are all-0-bits or all-1-bits). Support for other patterns and for masking - * of NXM_OF_ETH_SRC is optional. */ + * Masking: Fully maskable, in versions 1.8 and later. Earlier versions only + * supported the following masks for NXM_OF_ETH_DST_W: 00:00:00:00:00:00, + * fe:ff:ff:ff:ff:ff, 01:00:00:00:00:00, ff:ff:ff:ff:ff:ff. */ #define NXM_OF_ETH_DST NXM_HEADER (0x0000, 1, 6) #define NXM_OF_ETH_DST_W NXM_HEADER_W(0x0000, 1, 6) #define NXM_OF_ETH_SRC NXM_HEADER (0x0000, 2, 6) +#define NXM_OF_ETH_SRC_W NXM_HEADER_W(0x0000, 2, 6) /* Packet's Ethernet type. * @@ -1061,7 +1458,8 @@ enum nx_bd_algorithm { * * Format: 32-bit integer in network byte order. * - * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier + * versions, only CIDR masks are allowed, that is, masks that consist of N * high-order bits set to 1 and the other 32-N bits set to 0. */ #define NXM_OF_IP_SRC NXM_HEADER (0x0000, 7, 4) #define NXM_OF_IP_SRC_W NXM_HEADER_W(0x0000, 7, 4) @@ -1076,9 +1474,12 @@ enum nx_bd_algorithm { * * Format: 16-bit integer in network byte order. * - * Masking: Not maskable. */ + * Masking: Fully maskable, in Open vSwitch 1.6 and later. Not maskable, in + * earlier versions. */ #define NXM_OF_TCP_SRC NXM_HEADER (0x0000, 9, 2) +#define NXM_OF_TCP_SRC_W NXM_HEADER_W(0x0000, 9, 2) #define NXM_OF_TCP_DST NXM_HEADER (0x0000, 10, 2) +#define NXM_OF_TCP_DST_W NXM_HEADER_W(0x0000, 10, 2) /* The source or destination port in the UDP header. * @@ -1088,9 +1489,12 @@ enum nx_bd_algorithm { * * Format: 16-bit integer in network byte order. * - * Masking: Not maskable. */ + * Masking: Fully maskable, in Open vSwitch 1.6 and later. Not maskable, in + * earlier versions. */ #define NXM_OF_UDP_SRC NXM_HEADER (0x0000, 11, 2) +#define NXM_OF_UDP_SRC_W NXM_HEADER_W(0x0000, 11, 2) #define NXM_OF_UDP_DST NXM_HEADER (0x0000, 12, 2) +#define NXM_OF_UDP_DST_W NXM_HEADER_W(0x0000, 12, 2) /* The type or code in the ICMP header. * @@ -1110,7 +1514,7 @@ enum nx_bd_algorithm { * otherwise. Only ARP opcodes between 1 and 255 should be specified for * matching. * - * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly. + * Prereqs: NXM_OF_ETH_TYPE must match either 0x0806 or 0x8035. * * Format: 16-bit integer in network byte order. * @@ -1120,11 +1524,12 @@ enum nx_bd_algorithm { /* For an Ethernet+IP ARP packet, the source or target protocol address * in the ARP header. Always 0 otherwise. * - * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly. + * Prereqs: NXM_OF_ETH_TYPE must match either 0x0806 or 0x8035. * * Format: 32-bit integer in network byte order. * - * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier + * versions, only CIDR masks are allowed, that is, masks that consist of N * high-order bits set to 1 and the other 32-N bits set to 0. */ #define NXM_OF_ARP_SPA NXM_HEADER (0x0000, 16, 4) #define NXM_OF_ARP_SPA_W NXM_HEADER_W(0x0000, 16, 4) @@ -1160,12 +1565,22 @@ enum nx_bd_algorithm { #define NXM_NX_REG2_W NXM_HEADER_W(0x0001, 2, 4) #define NXM_NX_REG3 NXM_HEADER (0x0001, 3, 4) #define NXM_NX_REG3_W NXM_HEADER_W(0x0001, 3, 4) +#define NXM_NX_REG4 NXM_HEADER (0x0001, 4, 4) +#define NXM_NX_REG4_W NXM_HEADER_W(0x0001, 4, 4) +#define NXM_NX_REG5 NXM_HEADER (0x0001, 5, 4) +#define NXM_NX_REG5_W NXM_HEADER_W(0x0001, 5, 4) +#define NXM_NX_REG6 NXM_HEADER (0x0001, 6, 4) +#define NXM_NX_REG6_W NXM_HEADER_W(0x0001, 6, 4) +#define NXM_NX_REG7 NXM_HEADER (0x0001, 7, 4) +#define NXM_NX_REG7_W NXM_HEADER_W(0x0001, 7, 4) /* Tunnel ID. * - * For a packet received via GRE tunnel including a (32-bit) key, the key is - * stored in the low 32-bits and the high bits are zeroed. For other packets, - * the value is 0. + * For a packet received via a GRE, VXLAN or LISP tunnel including a (32-bit) + * key, the key is stored in the low 32-bits and the high bits are zeroed. For + * other packets, the value is 0. + * + * All zero bits, for packets not received via a keyed tunnel. * * Prereqs: None. * @@ -1178,7 +1593,7 @@ enum nx_bd_algorithm { /* For an Ethernet+IP ARP packet, the source or target hardware address * in the ARP header. Always 0 otherwise. * - * Prereqs: NXM_OF_ETH_TYPE must match 0x0806 exactly. + * Prereqs: NXM_OF_ETH_TYPE must match either 0x0806 or 0x8035. * * Format: 48-bit Ethernet MAC address. * @@ -1192,7 +1607,8 @@ enum nx_bd_algorithm { * * Format: 128-bit IPv6 address. * - * Masking: Only CIDR masks are allowed, that is, masks that consist of N + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous + * versions, only CIDR masks are allowed, that is, masks that consist of N * high-order bits set to 1 and the other 128-N bits set to 0. */ #define NXM_NX_IPV6_SRC NXM_HEADER (0x0001, 19, 16) #define NXM_NX_IPV6_SRC_W NXM_HEADER_W(0x0001, 19, 16) @@ -1220,8 +1636,11 @@ enum nx_bd_algorithm { * * Format: 128-bit IPv6 address. * - * Masking: Not maskable. */ -#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16) + * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous + * versions, only CIDR masks are allowed, that is, masks that consist of N + * high-order bits set to 1 and the other 128-N bits set to 0. */ +#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16) +#define NXM_NX_ND_TARGET_W NXM_HEADER_W (0x0001, 23, 16) /* The source link-layer address option in an IPv6 Neighbor Discovery * message. @@ -1249,6 +1668,169 @@ enum nx_bd_algorithm { * Masking: Not maskable. */ #define NXM_NX_ND_TLL NXM_HEADER (0x0001, 25, 6) +/* IP fragment information. + * + * Prereqs: + * NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. + * + * Format: 8-bit value with one of the values 0, 1, or 3, as described below. + * + * Masking: Fully maskable. + * + * This field has three possible values: + * + * - A packet that is not an IP fragment has value 0. + * + * - A packet that is an IP fragment with offset 0 (the first fragment) has + * bit 0 set and thus value 1. + * + * - A packet that is an IP fragment with nonzero offset has bits 0 and 1 set + * and thus value 3. + * + * NX_IP_FRAG_ANY and NX_IP_FRAG_LATER are declared to symbolically represent + * the meanings of bits 0 and 1. + * + * The switch may reject matches against values that can never appear. + * + * It is important to understand how this field interacts with the OpenFlow IP + * fragment handling mode: + * + * - In OFPC_FRAG_DROP mode, the OpenFlow switch drops all IP fragments + * before they reach the flow table, so every packet that is available for + * matching will have value 0 in this field. + * + * - Open vSwitch does not implement OFPC_FRAG_REASM mode, but if it did then + * IP fragments would be reassembled before they reached the flow table and + * again every packet available for matching would always have value 0. + * + * - In OFPC_FRAG_NORMAL mode, all three values are possible, but OpenFlow + * 1.0 says that fragments' transport ports are always 0, even for the + * first fragment, so this does not provide much extra information. + * + * - In OFPC_FRAG_NX_MATCH mode, all three values are possible. For + * fragments with offset 0, Open vSwitch makes L4 header information + * available. + */ +#define NXM_NX_IP_FRAG NXM_HEADER (0x0001, 26, 1) +#define NXM_NX_IP_FRAG_W NXM_HEADER_W(0x0001, 26, 1) + +/* Bits in the value of NXM_NX_IP_FRAG. */ +#define NX_IP_FRAG_ANY (1 << 0) /* Is this a fragment? */ +#define NX_IP_FRAG_LATER (1 << 1) /* Is this a fragment with nonzero offset? */ + +/* The flow label in the IPv6 header. + * + * Prereqs: NXM_OF_ETH_TYPE must match 0x86dd exactly. + * + * Format: 20-bit IPv6 flow label in least-significant bits. + * + * Masking: Fully maskable. */ +#define NXM_NX_IPV6_LABEL NXM_HEADER (0x0001, 27, 4) +#define NXM_NX_IPV6_LABEL_W NXM_HEADER_W(0x0001, 27, 4) + +/* The ECN of the IP header. + * + * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. + * + * Format: ECN in the low-order 2 bits. + * + * Masking: Not maskable. */ +#define NXM_NX_IP_ECN NXM_HEADER (0x0001, 28, 1) + +/* The time-to-live/hop limit of the IP header. + * + * Prereqs: NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. + * + * Format: 8-bit integer. + * + * Masking: Not maskable. */ +#define NXM_NX_IP_TTL NXM_HEADER (0x0001, 29, 1) + +/* Flow cookie. + * + * This may be used to gain the OpenFlow 1.1-like ability to restrict + * certain NXM-based Flow Mod and Flow Stats Request messages to flows + * with specific cookies. See the "nx_flow_mod" and "nx_flow_stats_request" + * structure definitions for more details. This match is otherwise not + * allowed. + * + * Prereqs: None. + * + * Format: 64-bit integer in network byte order. + * + * Masking: Arbitrary masks. */ +#define NXM_NX_COOKIE NXM_HEADER (0x0001, 30, 8) +#define NXM_NX_COOKIE_W NXM_HEADER_W(0x0001, 30, 8) + +/* The source or destination address in the outer IP header of a tunneled + * packet. + * + * For non-tunneled packets, the value is 0. + * + * Prereqs: None. + * + * Format: 32-bit integer in network byte order. + * + * Masking: Fully maskable. */ +#define NXM_NX_TUN_IPV4_SRC NXM_HEADER (0x0001, 31, 4) +#define NXM_NX_TUN_IPV4_SRC_W NXM_HEADER_W(0x0001, 31, 4) +#define NXM_NX_TUN_IPV4_DST NXM_HEADER (0x0001, 32, 4) +#define NXM_NX_TUN_IPV4_DST_W NXM_HEADER_W(0x0001, 32, 4) + +/* Metadata marked onto the packet in a system-dependent manner. + * + * The packet mark may be used to carry contextual information + * to other parts of the system outside of Open vSwitch. As a + * result, the semantics depend on system in use. + * + * Prereqs: None. + * + * Format: 32-bit integer in network byte order. + * + * Masking: Fully maskable. */ +#define NXM_NX_PKT_MARK NXM_HEADER (0x0001, 33, 4) +#define NXM_NX_PKT_MARK_W NXM_HEADER_W(0x0001, 33, 4) + +/* The flags in the TCP header. +* +* Prereqs: +* NXM_OF_ETH_TYPE must be either 0x0800 or 0x86dd. +* NXM_OF_IP_PROTO must match 6 exactly. +* +* Format: 16-bit integer with 4 most-significant bits forced to 0. +* +* Masking: Bits 0-11 fully maskable. */ +#define NXM_NX_TCP_FLAGS NXM_HEADER (0x0001, 34, 2) +#define NXM_NX_TCP_FLAGS_W NXM_HEADER_W(0x0001, 34, 2) + +/* Metadata dp_hash. + * + * Internal use only, not programable from controller. + * + * The dp_hash is used to carry the flow hash computed in the + * datapath. + * + * Prereqs: None. + * + * Format: 32-bit integer in network byte order. + * + * Masking: Fully maskable. */ +#define NXM_NX_DP_HASH NXM_HEADER (0x0001, 35, 4) +#define NXM_NX_DP_HASH_W NXM_HEADER_W(0x0001, 35, 4) + +/* Metadata recirc_id. + * + * Internal use only, not programable from controller. + * + * The recirc_id used for recirculation. 0 is reserved + * for initially received packet. + * + * Prereqs: None. + * + * Format: 32-bit integer in network byte order. + * + * Masking: not maskable. */ +#define NXM_NX_RECIRC_ID NXM_HEADER (0x0001, 36, 4) /* ## --------------------- ## */ /* ## Requests and replies. ## */ @@ -1260,19 +1842,21 @@ enum nx_flow_format { }; /* NXT_SET_FLOW_FORMAT request. */ -struct nxt_set_flow_format { - struct ofp_header header; - ovs_be32 vendor; /* NX_VENDOR_ID. */ - ovs_be32 subtype; /* NXT_SET_FLOW_FORMAT. */ +struct nx_set_flow_format { ovs_be32 format; /* One of NXFF_*. */ }; -OFP_ASSERT(sizeof(struct nxt_set_flow_format) == 20); +OFP_ASSERT(sizeof(struct nx_set_flow_format) == 4); -/* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD). */ +/* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD). + * + * It is possible to limit flow deletions and modifications to certain + * cookies by using the NXM_NX_COOKIE(_W) matches. The "cookie" field + * is used only to add or modify flow cookies. + */ struct nx_flow_mod { - struct nicira_header nxh; ovs_be64 cookie; /* Opaque controller-issued identifier. */ - ovs_be16 command; /* One of OFPFC_*. */ + ovs_be16 command; /* OFPFC_* + possibly a table ID (see comment + * on struct nx_flow_mod_table_id). */ ovs_be16 idle_timeout; /* Idle time before discarding (seconds). */ ovs_be16 hard_timeout; /* Max time before discarding (seconds). */ ovs_be16 priority; /* Priority level of flow entry. */ @@ -1293,15 +1877,20 @@ struct nx_flow_mod { * multiple of 8). */ }; -OFP_ASSERT(sizeof(struct nx_flow_mod) == 48); +OFP_ASSERT(sizeof(struct nx_flow_mod) == 32); -/* NXT_FLOW_REMOVED (analogous to OFPT_FLOW_REMOVED). */ +/* NXT_FLOW_REMOVED (analogous to OFPT_FLOW_REMOVED). + * + * 'table_id' is present only in Open vSwitch 1.11 and later. In earlier + * versions of Open vSwitch, this is a padding byte that is always zeroed. + * Therefore, a 'table_id' value of 0 indicates that the table ID is not known, + * and other values may be interpreted as one more than the flow's former table + * ID. */ struct nx_flow_removed { - struct nicira_header nxh; ovs_be64 cookie; /* Opaque controller-issued identifier. */ ovs_be16 priority; /* Priority level of flow entry. */ uint8_t reason; /* One of OFPRR_*. */ - uint8_t pad[1]; /* Align to 32-bits. */ + uint8_t table_id; /* Flow's former table ID, plus one. */ ovs_be32 duration_sec; /* Time flow was alive in seconds. */ ovs_be32 duration_nsec; /* Time flow was alive in nanoseconds beyond duration_sec. */ @@ -1314,12 +1903,15 @@ struct nx_flow_removed { * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of * all-zero bytes. */ }; -OFP_ASSERT(sizeof(struct nx_flow_removed) == 56); +OFP_ASSERT(sizeof(struct nx_flow_removed) == 40); /* Nicira vendor stats request of type NXST_FLOW (analogous to OFPST_FLOW - * request). */ + * request). + * + * It is possible to limit matches to certain cookies by using the + * NXM_NX_COOKIE and NXM_NX_COOKIE_W matches. + */ struct nx_flow_stats_request { - struct nicira_stats_msg nsm; ovs_be16 out_port; /* Require matching entries to include this as an output port. A value of OFPP_NONE indicates no restriction. */ @@ -1334,10 +1926,30 @@ struct nx_flow_stats_request { * message. */ }; -OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 32); +OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 8); /* Body for Nicira vendor stats reply of type NXST_FLOW (analogous to - * OFPST_FLOW reply). */ + * OFPST_FLOW reply). + * + * The values of 'idle_age' and 'hard_age' are only meaningful when talking to + * a switch that implements the NXT_FLOW_AGE extension. Zero means that the + * true value is unknown, perhaps because hardware does not track the value. + * (Zero is also the value that one should ordinarily expect to see talking to + * a switch that does not implement NXT_FLOW_AGE, since those switches zero the + * padding bytes that these fields replaced.) A nonzero value X represents X-1 + * seconds. A value of 65535 represents 65534 or more seconds. + * + * 'idle_age' is the number of seconds that the flow has been idle, that is, + * the number of seconds since a packet passed through the flow. 'hard_age' is + * the number of seconds since the flow was last modified (e.g. OFPFC_MODIFY or + * OFPFC_MODIFY_STRICT). (The 'duration_*' fields are the elapsed time since + * the flow was added, regardless of subsequent modifications.) + * + * For a flow with an idle or hard timeout, 'idle_age' or 'hard_age', + * respectively, will ordinarily be smaller than the timeout, but flow + * expiration times are only approximate and so one must be prepared to + * tolerate expirations that occur somewhat early or late. + */ struct nx_flow_stats { ovs_be16 length; /* Length of this entry. */ uint8_t table_id; /* ID of table flow came from. */ @@ -1345,12 +1957,12 @@ struct nx_flow_stats { ovs_be32 duration_sec; /* Time flow has been alive in seconds. */ ovs_be32 duration_nsec; /* Time flow has been alive in nanoseconds beyond duration_sec. */ - ovs_be16 priority; /* Priority of the entry. Only meaningful - when this is not an exact-match entry. */ + ovs_be16 priority; /* Priority of the entry. */ ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */ ovs_be16 hard_timeout; /* Number of seconds before expiration. */ ovs_be16 match_len; /* Length of nx_match. */ - uint8_t pad2[4]; /* Align to 64 bits. */ + ovs_be16 idle_age; /* Seconds since last packet, plus one. */ + ovs_be16 hard_age; /* Seconds since last modification, plus one. */ ovs_be64 cookie; /* Opaque controller-issued identifier. */ ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */ ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */ @@ -1365,9 +1977,11 @@ struct nx_flow_stats { OFP_ASSERT(sizeof(struct nx_flow_stats) == 48); /* Nicira vendor stats request of type NXST_AGGREGATE (analogous to - * OFPST_AGGREGATE request). */ + * OFPST_AGGREGATE request). + * + * The reply format is identical to the reply format for OFPST_AGGREGATE, + * except for the header. */ struct nx_aggregate_stats_request { - struct nicira_stats_msg nsm; ovs_be16 out_port; /* Require matching entries to include this as an output port. A value of OFPP_NONE indicates no restriction. */ @@ -1382,17 +1996,375 @@ struct nx_aggregate_stats_request { * message. */ }; -OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 32); - -/* Body for nicira_stats_msg reply of type NXST_AGGREGATE (analogous to - * OFPST_AGGREGATE reply). */ -struct nx_aggregate_stats_reply { - struct nicira_stats_msg nsm; - ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */ - ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */ - ovs_be32 flow_count; /* Number of flows. */ - uint8_t pad[4]; /* Align to 64 bits. */ +OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 8); + +/* NXT_SET_CONTROLLER_ID. + * + * Each OpenFlow controller connection has a 16-bit identifier that is + * initially 0. This message changes the connection's ID to 'id'. + * + * Controller connection IDs need not be unique. + * + * The NXAST_CONTROLLER action is the only current user of controller + * connection IDs. */ +struct nx_controller_id { + uint8_t zero[6]; /* Must be zero. */ + ovs_be16 controller_id; /* New controller connection ID. */ +}; +OFP_ASSERT(sizeof(struct nx_controller_id) == 8); + +/* Action structure for NXAST_CONTROLLER. + * + * This generalizes using OFPAT_OUTPUT to send a packet to OFPP_CONTROLLER. In + * addition to the 'max_len' that OFPAT_OUTPUT supports, it also allows + * specifying: + * + * - 'reason': The reason code to use in the ofp_packet_in or nx_packet_in. + * + * - 'controller_id': The ID of the controller connection to which the + * ofp_packet_in should be sent. The ofp_packet_in or nx_packet_in is + * sent only to controllers that have the specified controller connection + * ID. See "struct nx_controller_id" for more information. */ +struct nx_action_controller { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 16. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_CONTROLLER. */ + ovs_be16 max_len; /* Maximum length to send to controller. */ + ovs_be16 controller_id; /* Controller ID to send packet-in. */ + uint8_t reason; /* enum ofp_packet_in_reason (OFPR_*). */ + uint8_t zero; /* Must be zero. */ +}; +OFP_ASSERT(sizeof(struct nx_action_controller) == 16); + +/* Flow Table Monitoring + * ===================== + * + * NXST_FLOW_MONITOR allows a controller to keep track of changes to OpenFlow + * flow table(s) or subsets of them, with the following workflow: + * + * 1. The controller sends an NXST_FLOW_MONITOR request to begin monitoring + * flows. The 'id' in the request must be unique among all monitors that + * the controller has started and not yet canceled on this OpenFlow + * connection. + * + * 2. The switch responds with an NXST_FLOW_MONITOR reply. If the request's + * 'flags' included NXFMF_INITIAL, the reply includes all the flows that + * matched the request at the time of the request (with event NXFME_ADDED). + * If 'flags' did not include NXFMF_INITIAL, the reply is empty. + * + * The reply uses the xid of the request (as do all replies to OpenFlow + * requests). + * + * 3. Whenever a change to a flow table entry matches some outstanding monitor + * request's criteria and flags, the switch sends a notification to the + * controller as an additional NXST_FLOW_MONITOR reply with xid 0. + * + * When multiple outstanding monitors match a single change, only a single + * notification is sent. This merged notification includes the information + * requested in any of the individual monitors. That is, if any of the + * matching monitors requests actions (NXFMF_ACTIONS), the notification + * includes actions, and if any of the monitors request full changes for the + * controller's own changes (NXFMF_OWN), the controller's own changes will + * be included in full. + * + * 4. The controller may cancel a monitor with NXT_FLOW_MONITOR_CANCEL. No + * further notifications will be sent on the basis of the canceled monitor + * afterward. + * + * + * Buffer Management + * ================= + * + * OpenFlow messages for flow monitor notifications can overflow the buffer + * space available to the switch, either temporarily (e.g. due to network + * conditions slowing OpenFlow traffic) or more permanently (e.g. the sustained + * rate of flow table change exceeds the network bandwidth between switch and + * controller). + * + * When Open vSwitch's notification buffer space reaches a limiting threshold, + * OVS reacts as follows: + * + * 1. OVS sends an NXT_FLOW_MONITOR_PAUSED message to the controller, following + * all the already queued notifications. After it receives this message, + * the controller knows that its view of the flow table, as represented by + * flow monitor notifications, is incomplete. + * + * 2. As long as the notification buffer is not empty: + * + * - NXMFE_ADD and NXFME_MODIFIED notifications will not be sent. + * + * - NXFME_DELETED notifications will still be sent, but only for flows + * that existed before OVS sent NXT_FLOW_MONITOR_PAUSED. + * + * - NXFME_ABBREV notifications will not be sent. They are treated as + * the expanded version (and therefore only the NXFME_DELETED + * components, if any, are sent). + * + * 3. When the notification buffer empties, OVS sends NXFME_ADD notifications + * for flows added since the buffer reached its limit and NXFME_MODIFIED + * notifications for flows that existed before the limit was reached and + * changed after the limit was reached. + * + * 4. OVS sends an NXT_FLOW_MONITOR_RESUMED message to the controller. After + * it receives this message, the controller knows that its view of the flow + * table, as represented by flow monitor notifications, is again complete. + * + * This allows the maximum buffer space requirement for notifications to be + * bounded by the limit plus the maximum number of supported flows. + * + * + * "Flow Removed" messages + * ======================= + * + * The flow monitor mechanism is independent of OFPT_FLOW_REMOVED and + * NXT_FLOW_REMOVED. Flow monitor updates for deletion are sent if + * NXFMF_DELETE is set on a monitor, regardless of whether the + * OFPFF_SEND_FLOW_REM flag was set when the flow was added. */ + +/* NXST_FLOW_MONITOR request. + * + * The NXST_FLOW_MONITOR request's body consists of an array of zero or more + * instances of this structure. The request arranges to monitor the flows + * that match the specified criteria, which are interpreted in the same way as + * for NXST_FLOW. + * + * 'id' identifies a particular monitor for the purpose of allowing it to be + * canceled later with NXT_FLOW_MONITOR_CANCEL. 'id' must be unique among + * existing monitors that have not already been canceled. + * + * The reply includes the initial flow matches for monitors that have the + * NXFMF_INITIAL flag set. No single flow will be included in the reply more + * than once, even if more than one requested monitor matches that flow. The + * reply will be empty if none of the monitors has NXFMF_INITIAL set or if none + * of the monitors initially matches any flows. + * + * For NXFMF_ADD, an event will be reported if 'out_port' matches against the + * actions of the flow being added or, for a flow that is replacing an existing + * flow, if 'out_port' matches against the actions of the flow being replaced. + * For NXFMF_DELETE, 'out_port' matches against the actions of a flow being + * deleted. For NXFMF_MODIFY, an event will be reported if 'out_port' matches + * either the old or the new actions. */ +struct nx_flow_monitor_request { + ovs_be32 id; /* Controller-assigned ID for this monitor. */ + ovs_be16 flags; /* NXFMF_*. */ + ovs_be16 out_port; /* Required output port, if not OFPP_NONE. */ + ovs_be16 match_len; /* Length of nx_match. */ + uint8_t table_id; /* One table's ID or 0xff for all tables. */ + uint8_t zeros[5]; /* Align to 64 bits (must be zero). */ + /* Followed by: + * - Exactly match_len (possibly 0) bytes containing the nx_match, then + * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of + * all-zero bytes. */ +}; +OFP_ASSERT(sizeof(struct nx_flow_monitor_request) == 16); + +/* 'flags' bits in struct nx_flow_monitor_request. */ +enum nx_flow_monitor_flags { + /* When to send updates. */ + NXFMF_INITIAL = 1 << 0, /* Initially matching flows. */ + NXFMF_ADD = 1 << 1, /* New matching flows as they are added. */ + NXFMF_DELETE = 1 << 2, /* Old matching flows as they are removed. */ + NXFMF_MODIFY = 1 << 3, /* Matching flows as they are changed. */ + + /* What to include in updates. */ + NXFMF_ACTIONS = 1 << 4, /* If set, actions are included. */ + NXFMF_OWN = 1 << 5, /* If set, include own changes in full. */ +}; + +/* NXST_FLOW_MONITOR reply header. + * + * The body of an NXST_FLOW_MONITOR reply is an array of variable-length + * structures, each of which begins with this header. The 'length' member may + * be used to traverse the array, and the 'event' member may be used to + * determine the particular structure. + * + * Every instance is a multiple of 8 bytes long. */ +struct nx_flow_update_header { + ovs_be16 length; /* Length of this entry. */ + ovs_be16 event; /* One of NXFME_*. */ + /* ...other data depending on 'event'... */ +}; +OFP_ASSERT(sizeof(struct nx_flow_update_header) == 4); + +/* 'event' values in struct nx_flow_update_header. */ +enum nx_flow_update_event { + /* struct nx_flow_update_full. */ + NXFME_ADDED = 0, /* Flow was added. */ + NXFME_DELETED = 1, /* Flow was deleted. */ + NXFME_MODIFIED = 2, /* Flow (generally its actions) was changed. */ + + /* struct nx_flow_update_abbrev. */ + NXFME_ABBREV = 3, /* Abbreviated reply. */ +}; + +/* NXST_FLOW_MONITOR reply for NXFME_ADDED, NXFME_DELETED, and + * NXFME_MODIFIED. */ +struct nx_flow_update_full { + ovs_be16 length; /* Length is 24. */ + ovs_be16 event; /* One of NXFME_*. */ + ovs_be16 reason; /* OFPRR_* for NXFME_DELETED, else zero. */ + ovs_be16 priority; /* Priority of the entry. */ + ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */ + ovs_be16 hard_timeout; /* Number of seconds before expiration. */ + ovs_be16 match_len; /* Length of nx_match. */ + uint8_t table_id; /* ID of flow's table. */ + uint8_t pad; /* Reserved, currently zeroed. */ + ovs_be64 cookie; /* Opaque controller-issued identifier. */ + /* Followed by: + * - Exactly match_len (possibly 0) bytes containing the nx_match, then + * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of + * all-zero bytes, then + * - Actions to fill out the remainder 'length' bytes (always a multiple + * of 8). If NXFMF_ACTIONS was not specified, or 'event' is + * NXFME_DELETED, no actions are included. + */ +}; +OFP_ASSERT(sizeof(struct nx_flow_update_full) == 24); + +/* NXST_FLOW_MONITOR reply for NXFME_ABBREV. + * + * When the controller does not specify NXFMF_OWN in a monitor request, any + * flow tables changes due to the controller's own requests (on the same + * OpenFlow channel) will be abbreviated, when possible, to this form, which + * simply specifies the 'xid' of the OpenFlow request (e.g. an OFPT_FLOW_MOD or + * NXT_FLOW_MOD) that caused the change. + * + * Some changes cannot be abbreviated and will be sent in full: + * + * - Changes that only partially succeed. This can happen if, for example, + * a flow_mod with type OFPFC_MODIFY affects multiple flows, but only some + * of those modifications succeed (e.g. due to hardware limitations). + * + * This cannot occur with the current implementation of the Open vSwitch + * software datapath. It could happen with other datapath implementations. + * + * - Changes that race with conflicting changes made by other controllers or + * other flow_mods (not separated by barriers) by the same controller. + * + * This cannot occur with the current Open vSwitch implementation + * (regardless of datapath) because Open vSwitch internally serializes + * potentially conflicting changes. + * + * A flow_mod that does not change the flow table will not trigger any + * notification, even an abbreviated one. For example, a "modify" or "delete" + * flow_mod that does not match any flows will not trigger a notification. + * Whether an "add" or "modify" that specifies all the same parameters that a + * flow already has triggers a notification is unspecified and subject to + * change in future versions of Open vSwitch. + * + * OVS will always send the notifications for a given flow table change before + * the reply to a OFPT_BARRIER_REQUEST request that follows the flow table + * change. Thus, if the controller does not receive an abbreviated (or + * unabbreviated) notification for a flow_mod before the next + * OFPT_BARRIER_REPLY, it will never receive one. */ +struct nx_flow_update_abbrev { + ovs_be16 length; /* Length is 8. */ + ovs_be16 event; /* NXFME_ABBREV. */ + ovs_be32 xid; /* Controller-specified xid from flow_mod. */ +}; +OFP_ASSERT(sizeof(struct nx_flow_update_abbrev) == 8); + +/* NXT_FLOW_MONITOR_CANCEL. + * + * Used by a controller to cancel an outstanding monitor. */ +struct nx_flow_monitor_cancel { + ovs_be32 id; /* 'id' from nx_flow_monitor_request. */ +}; +OFP_ASSERT(sizeof(struct nx_flow_monitor_cancel) == 4); + +/* Action structure for NXAST_WRITE_METADATA. + * + * Modifies the 'mask' bits of the metadata value. */ +struct nx_action_write_metadata { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 32. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_WRITE_METADATA. */ + uint8_t zeros[6]; /* Must be zero. */ + ovs_be64 metadata; /* Metadata register. */ + ovs_be64 mask; /* Metadata mask. */ +}; +OFP_ASSERT(sizeof(struct nx_action_write_metadata) == 32); + +/* Action structure for NXAST_PUSH_MPLS. */ +struct nx_action_push_mpls { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 8. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_PUSH_MPLS. */ + ovs_be16 ethertype; /* Ethertype */ + uint8_t pad[4]; +}; +OFP_ASSERT(sizeof(struct nx_action_push_mpls) == 16); + +/* Action structure for NXAST_POP_MPLS. */ +struct nx_action_pop_mpls { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 8. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_POP_MPLS. */ + ovs_be16 ethertype; /* Ethertype */ + uint8_t pad[4]; +}; +OFP_ASSERT(sizeof(struct nx_action_pop_mpls) == 16); + +/* Action structure for NXAST_SET_MPLS_LABEL. */ +struct nx_action_mpls_label { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 8. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SET_MPLS_LABEL. */ + uint8_t zeros[2]; /* Must be zero. */ + ovs_be32 label; /* LABEL */ +}; +OFP_ASSERT(sizeof(struct nx_action_mpls_label) == 16); + +/* Action structure for NXAST_SET_MPLS_TC. */ +struct nx_action_mpls_tc { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 8. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SET_MPLS_TC. */ + uint8_t tc; /* TC */ + uint8_t pad[5]; +}; +OFP_ASSERT(sizeof(struct nx_action_mpls_tc) == 16); + +/* Action structure for NXAST_SET_MPLS_TTL. */ +struct nx_action_mpls_ttl { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 8. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SET_MPLS_TTL. */ + uint8_t ttl; /* TTL */ + uint8_t pad[5]; +}; +OFP_ASSERT(sizeof(struct nx_action_mpls_ttl) == 16); + +/* Action structure for NXAST_SAMPLE. + * + * Samples matching packets with the given probability and sends them + * each to the set of collectors identified with the given ID. The + * probability is expressed as a number of packets to be sampled out + * of USHRT_MAX packets, and must be >0. + * + * When sending packet samples to IPFIX collectors, the IPFIX flow + * record sent for each sampled packet is associated with the given + * observation domain ID and observation point ID. Each IPFIX flow + * record contain the sampled packet's headers when executing this + * rule. If a sampled packet's headers are modified by previous + * actions in the flow, those modified headers are sent. */ +struct nx_action_sample { + ovs_be16 type; /* OFPAT_VENDOR. */ + ovs_be16 len; /* Length is 24. */ + ovs_be32 vendor; /* NX_VENDOR_ID. */ + ovs_be16 subtype; /* NXAST_SAMPLE. */ + ovs_be16 probability; /* Fraction of packets to sample. */ + ovs_be32 collector_set_id; /* ID of collector set in OVSDB. */ + ovs_be32 obs_domain_id; /* ID of sampling observation domain. */ + ovs_be32 obs_point_id; /* ID of sampling observation point. */ }; -OFP_ASSERT(sizeof(struct nx_aggregate_stats_reply) == 48); +OFP_ASSERT(sizeof(struct nx_action_sample) == 24); #endif /* openflow/nicira-ext.h */