X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=include%2Fopenflow.h;h=202fd5a01dc013e25294b3d6c3924c87c8e937d9;hb=37c94b45fdb66b9c2e75d2d5857786e4d4ce74bc;hp=ba25687b5ecbbbc77fafce2612cfea045616e89f;hpb=b41a6a0a6d23322da667c39d1c5e65496ae8b02f;p=sliver-openvswitch.git diff --git a/include/openflow.h b/include/openflow.h index ba25687b5..202fd5a01 100644 --- a/include/openflow.h +++ b/include/openflow.h @@ -60,15 +60,10 @@ #define OFP_PACKED /* SWIG doesn't understand __attribute. */ #endif -/* Maximum length of a OpenFlow packet. */ -#define OFP_MAXLEN (sizeof(struct ofp_switch_features) \ - + (sizeof(struct ofp_phy_port) * OFPP_MAX) + 200) - - /* The most significant bit being set in the version field indicates an * experimental OpenFlow version. */ -#define OFP_VERSION 0x88 +#define OFP_VERSION 0x96 #define OFP_MAX_TABLE_NAME_LEN 32 #define OFP_MAX_PORT_NAME_LEN 16 @@ -81,7 +76,7 @@ /* Port numbering. Physical ports are numbered starting from 0. */ enum ofp_port { /* Maximum number of physical switch ports. */ - OFPP_MAX = 0x100, + OFPP_MAX = 0xff00, /* Fake output "ports". */ OFPP_IN_PORT = 0xfff8, /* Send the packet out the input port. This @@ -101,23 +96,33 @@ enum ofp_port { }; enum ofp_type { - OFPT_FEATURES_REQUEST, /* 0 Controller/switch message */ - OFPT_FEATURES_REPLY, /* 1 Controller/switch message */ - OFPT_GET_CONFIG_REQUEST, /* 2 Controller/switch message */ - OFPT_GET_CONFIG_REPLY, /* 3 Controller/switch message */ - OFPT_SET_CONFIG, /* 4 Controller/switch message */ - OFPT_PACKET_IN, /* 5 Async message */ - OFPT_PACKET_OUT, /* 6 Controller/switch message */ - OFPT_FLOW_MOD, /* 7 Controller/switch message */ - OFPT_FLOW_EXPIRED, /* 8 Async message */ - OFPT_TABLE, /* 9 Controller/switch message */ - OFPT_PORT_MOD, /* 10 Controller/switch message */ - OFPT_PORT_STATUS, /* 11 Async message */ - OFPT_ERROR_MSG, /* 12 Async message */ - OFPT_STATS_REQUEST, /* 13 Controller/switch message */ - OFPT_STATS_REPLY, /* 14 Controller/switch message */ - OFPT_ECHO_REQUEST, /* 15 Symmetric message */ - OFPT_ECHO_REPLY /* 16 Symmetric message */ + /* Immutable messages. */ + OFPT_HELLO, /* Symmetric message */ + OFPT_ERROR, /* Symmetric message */ + OFPT_ECHO_REQUEST, /* Symmetric message */ + OFPT_ECHO_REPLY, /* Symmetric message */ + OFPT_VENDOR, /* Symmetric message */ + + /* Switch configuration messages. */ + OFPT_FEATURES_REQUEST, /* Controller/switch message */ + OFPT_FEATURES_REPLY, /* Controller/switch message */ + OFPT_GET_CONFIG_REQUEST, /* Controller/switch message */ + OFPT_GET_CONFIG_REPLY, /* Controller/switch message */ + OFPT_SET_CONFIG, /* Controller/switch message */ + + /* Asynchronous messages. */ + OFPT_PACKET_IN, /* Async message */ + OFPT_FLOW_EXPIRED, /* Async message */ + OFPT_PORT_STATUS, /* Async message */ + + /* Controller command messages. */ + OFPT_PACKET_OUT, /* Controller/switch message */ + OFPT_FLOW_MOD, /* Controller/switch message */ + OFPT_PORT_MOD, /* Controller/switch message */ + + /* Statistics messages. */ + OFPT_STATS_REQUEST, /* Controller/switch message */ + OFPT_STATS_REPLY /* Controller/switch message */ }; /* Header on all OpenFlow packets. */ @@ -131,6 +136,12 @@ struct ofp_header { }; OFP_ASSERT(sizeof(struct ofp_header) == 8); +/* OFPT_HELLO. This message has an empty body, but implementations must + * ignore any data included in the body, to allow for future extensions. */ +struct ofp_hello { + struct ofp_header header; +}; + #define OFP_DEFAULT_MISS_SEND_LEN 128 enum ofp_config_flags { @@ -138,10 +149,10 @@ enum ofp_config_flags { OFPC_SEND_FLOW_EXP = 1 << 0, /* Handling of IP fragments. */ - OFPC_FRAG_NORMAL = 0 << 1, /* No special handling for fragments. */ - OFPC_FRAG_DROP = 1 << 1, /* Drop fragments. */ - OFPC_FRAG_REASM = 2 << 1, /* Reassemble (only if OFPC_IP_REASM set). */ - OFPC_FRAG_MASK = 3 << 1 + OFPC_FRAG_NORMAL = 0 << 1, /* No special handling for fragments. */ + OFPC_FRAG_DROP = 1 << 1, /* Drop fragments. */ + OFPC_FRAG_REASM = 2 << 1, /* Reassemble (only if OFPC_IP_REASM set). */ + OFPC_FRAG_MASK = 3 << 1 }; /* Switch configuration. */ @@ -155,42 +166,80 @@ OFP_ASSERT(sizeof(struct ofp_switch_config) == 12); /* Capabilities supported by the datapath. */ enum ofp_capabilities { - OFPC_FLOW_STATS = 1 << 0, /* Flow statistics. */ - OFPC_TABLE_STATS = 1 << 1, /* Table statistics. */ - OFPC_PORT_STATS = 1 << 2, /* Port statistics. */ - OFPC_STP = 1 << 3, /* 802.11d spanning tree. */ - OFPC_MULTI_PHY_TX = 1 << 4, /* Supports transmitting through multiple - physical interfaces */ - OFPC_IP_REASM = 1 << 5 /* Can reassemble IP fragments. */ + OFPC_FLOW_STATS = 1 << 0, /* Flow statistics. */ + OFPC_TABLE_STATS = 1 << 1, /* Table statistics. */ + OFPC_PORT_STATS = 1 << 2, /* Port statistics. */ + OFPC_STP = 1 << 3, /* 802.1d spanning tree. */ + OFPC_MULTI_PHY_TX = 1 << 4, /* Supports transmitting through multiple + physical interfaces */ + OFPC_IP_REASM = 1 << 5 /* Can reassemble IP fragments. */ +}; + +/* Flags to indicate behavior of the physical port. These flags are + * used in ofp_phy_port to describe the current configuration. They are + * used in the ofp_port_mod message to configure the port's behavior. + */ +enum ofp_port_config { + OFPPC_PORT_DOWN = 1 << 0, /* Port is administratively down. */ + + OFPPC_NO_STP = 1 << 1, /* Disable 802.1D spanning tree on port. */ + OFPPC_NO_RECV = 1 << 2, /* Drop most packets received on port. */ + OFPPC_NO_RECV_STP = 1 << 3, /* Drop received 802.1D STP packets. */ + OFPPC_NO_FLOOD = 1 << 4, /* Do not include this port when flooding. */ + OFPPC_NO_FWD = 1 << 5, /* Drop packets forwarded to port. */ + OFPPC_NO_PACKET_IN = 1 << 6 /* Do not send packet-in msgs for port. */ }; -/* Flags to indicate behavior of the physical port */ -enum ofp_port_flags { - OFPPFL_NO_FLOOD = 1 << 0, /* Do not include this port when flooding */ +/* Current state of the physical port. These are not configurable from + * the controller. + */ +enum ofp_port_state { + OFPPS_LINK_DOWN = 1 << 0, /* No physical link present. */ + + /* The OFPPS_STP_* bits have no effect on switch operation. The + * controller must adjust OFPPC_NO_RECV, OFPPC_NO_FWD, and + * OFPPC_NO_PACKET_IN appropriately to fully implement an 802.1D spanning + * tree. */ + OFPPS_STP_LISTEN = 0 << 8, /* Not learning or relaying frames. */ + OFPPS_STP_LEARN = 1 << 8, /* Learning but not relaying frames. */ + OFPPS_STP_FORWARD = 2 << 8, /* Learning and relaying frames. */ + OFPPS_STP_BLOCK = 3 << 8, /* Not part of spanning tree. */ + OFPPS_STP_MASK = 3 << 8 /* Bit mask for OFPPS_STP_* values. */ }; /* Features of physical ports available in a datapath. */ enum ofp_port_features { - OFPPF_10MB_HD = 1 << 0, /* 10 Mb half-duplex rate support. */ - OFPPF_10MB_FD = 1 << 1, /* 10 Mb full-duplex rate support. */ - OFPPF_100MB_HD = 1 << 2, /* 100 Mb half-duplex rate support. */ - OFPPF_100MB_FD = 1 << 3, /* 100 Mb full-duplex rate support. */ - OFPPF_1GB_HD = 1 << 4, /* 1 Gb half-duplex rate support. */ - OFPPF_1GB_FD = 1 << 5, /* 1 Gb full-duplex rate support. */ - OFPPF_10GB_FD = 1 << 6, /* 10 Gb full-duplex rate support. */ + OFPPF_10MB_HD = 1 << 0, /* 10 Mb half-duplex rate support. */ + OFPPF_10MB_FD = 1 << 1, /* 10 Mb full-duplex rate support. */ + OFPPF_100MB_HD = 1 << 2, /* 100 Mb half-duplex rate support. */ + OFPPF_100MB_FD = 1 << 3, /* 100 Mb full-duplex rate support. */ + OFPPF_1GB_HD = 1 << 4, /* 1 Gb half-duplex rate support. */ + OFPPF_1GB_FD = 1 << 5, /* 1 Gb full-duplex rate support. */ + OFPPF_10GB_FD = 1 << 6, /* 10 Gb full-duplex rate support. */ + OFPPF_COPPER = 1 << 7, /* Copper medium */ + OFPPF_FIBER = 1 << 8, /* Fiber medium */ + OFPPF_AUTONEG = 1 << 9, /* Auto-negotiation */ + OFPPF_PAUSE = 1 << 10, /* Pause */ + OFPPF_PAUSE_ASYM = 1 << 11 /* Asymmetric pause */ }; - /* Description of a physical port */ struct ofp_phy_port { uint16_t port_no; uint8_t hw_addr[OFP_ETH_ALEN]; uint8_t name[OFP_MAX_PORT_NAME_LEN]; /* Null-terminated */ - uint32_t flags; /* Bitmap of "ofp_port_flags". */ - uint32_t speed; /* Current speed in Mbps */ - uint32_t features; /* Bitmap of supported "ofp_port_features"s. */ + + uint32_t config; /* Bitmap of OFPPC_* flags. */ + uint32_t state; /* Bitmap of OFPPS_* flags. */ + + /* Bitmaps of OFPPF_* that describe features. All bits zeroed if + * unsupported or unavailable. */ + uint32_t curr; /* Current features. */ + uint32_t advertised; /* Features being advertised by the port. */ + uint32_t supported; /* Features supported by the port. */ + uint32_t peer; /* Features advertised by peer. */ }; -OFP_ASSERT(sizeof(struct ofp_phy_port) == 36); +OFP_ASSERT(sizeof(struct ofp_phy_port) == 48); /* Switch features. */ struct ofp_switch_features { @@ -198,49 +247,56 @@ struct ofp_switch_features { uint64_t datapath_id; /* Datapath unique ID. Only the lower 48-bits are meaningful. */ - /* Table info. */ - uint32_t n_exact; /* Max exact-match table entries. */ - uint32_t n_compression; /* Max entries compressed on service port. */ - uint32_t n_general; /* Max entries of arbitrary form. */ - - /* Buffer limits. A datapath that cannot buffer reports 0.*/ - uint32_t buffer_mb; /* Space for buffering packets, in MB. */ uint32_t n_buffers; /* Max packets buffered at once. */ + uint8_t n_tables; /* Number of tables supported by datapath. */ + uint8_t pad[3]; /* Align to 64-bits. */ + /* Features. */ uint32_t capabilities; /* Bitmap of support "ofp_capabilities". */ uint32_t actions; /* Bitmap of supported "ofp_action_type"s. */ - uint8_t pad[4]; /* Align to 64-bits. */ /* Port info.*/ - struct ofp_phy_port ports[0]; /* Port definitions. The number of ports + struct ofp_phy_port ports[0]; /* Port definitions. The number of ports is inferred from the length field in the header. */ }; -OFP_ASSERT(sizeof(struct ofp_switch_features) == 48); +OFP_ASSERT(sizeof(struct ofp_switch_features) == 32); /* What changed about the physical port */ enum ofp_port_reason { OFPPR_ADD, /* The port was added */ OFPPR_DELETE, /* The port was removed */ - OFPPR_MOD /* Some attribute of the port has changed */ + OFPPR_MODIFY /* Some attribute of the port has changed */ }; /* A physical port has changed in the datapath */ struct ofp_port_status { struct ofp_header header; uint8_t reason; /* One of OFPPR_* */ - uint8_t pad[3]; /* Align to 32-bits */ + uint8_t pad[7]; /* Align to 64-bits */ struct ofp_phy_port desc; }; -OFP_ASSERT(sizeof(struct ofp_port_status) == 48); +OFP_ASSERT(sizeof(struct ofp_port_status) == 64); /* Modify behavior of the physical port */ struct ofp_port_mod { struct ofp_header header; - struct ofp_phy_port desc; + uint16_t port_no; + uint8_t hw_addr[OFP_ETH_ALEN]; /* The hardware address is not + configurable. This is used to + sanity-check the request, so it must + be the same as returned in an + ofp_phy_port struct. */ + + uint32_t config; /* Bitmap of OFPPC_* flags. */ + uint32_t mask; /* Bitmap of OFPPC_* flags to be changed. */ + + uint32_t advertise; /* Bitmap of "ofp_port_features"s. Zero all + bits to prevent any action taking place. */ + uint8_t pad[4]; /* Pad to 64-bits. */ }; -OFP_ASSERT(sizeof(struct ofp_port_mod) == 44); +OFP_ASSERT(sizeof(struct ofp_port_mod) == 32); /* Why is this packet being sent to the controller? */ enum ofp_packet_in_reason { @@ -267,50 +323,108 @@ OFP_ASSERT(sizeof(struct ofp_packet_in) == 20); enum ofp_action_type { OFPAT_OUTPUT, /* Output to switch port. */ - OFPAT_SET_DL_VLAN, /* VLAN. */ + OFPAT_SET_VLAN_VID, /* Set the 802.1q VLAN id. */ + OFPAT_SET_VLAN_PCP, /* Set the 802.1q priority. */ + OFPAT_STRIP_VLAN, /* Strip the 802.1q header. */ OFPAT_SET_DL_SRC, /* Ethernet source address. */ OFPAT_SET_DL_DST, /* Ethernet destination address. */ OFPAT_SET_NW_SRC, /* IP source address. */ OFPAT_SET_NW_DST, /* IP destination address. */ OFPAT_SET_TP_SRC, /* TCP/UDP source port. */ - OFPAT_SET_TP_DST /* TCP/UDP destination port. */ + OFPAT_SET_TP_DST, /* TCP/UDP destination port. */ + OFPAT_VENDOR = 0xffff }; -/* An output action sends packets out 'port'. When the 'port' is the - * OFPP_CONTROLLER, 'max_len' indicates the max number of bytes to - * send. A 'max_len' of zero means the entire packet should be sent. */ +/* Action structure for OFPAT_OUTPUT, which sends packets out 'port'. + * When the 'port' is the OFPP_CONTROLLER, 'max_len' indicates the max + * number of bytes to send. A 'max_len' of zero means the entire packet + * should be sent. */ struct ofp_action_output { - uint16_t max_len; - uint16_t port; + uint16_t type; /* OFPAT_OUTPUT. */ + uint16_t len; /* Length is 8. */ + uint16_t port; /* Output port. */ + uint16_t max_len; /* Max length to send to controller. */ }; -OFP_ASSERT(sizeof(struct ofp_action_output) == 4); +OFP_ASSERT(sizeof(struct ofp_action_output) == 8); -/* The VLAN id is 12-bits, so we'll use the entire 16 bits to indicate - * special conditions. All ones is used to indicate that no VLAN id was - * set, or if used as an action, that the VLAN header should be - * stripped. - */ +/* The VLAN id is 12 bits, so we can use the entire 16 bits to indicate + * special conditions. All ones is used to match that no VLAN id was + * set. */ #define OFP_VLAN_NONE 0xffff -struct ofp_action { - uint16_t type; /* One of OFPAT_* */ - union { - struct ofp_action_output output; /* OFPAT_OUTPUT: output struct. */ - uint16_t vlan_id; /* OFPAT_SET_DL_VLAN: VLAN id. */ - uint8_t dl_addr[OFP_ETH_ALEN]; /* OFPAT_SET_DL_SRC/DST */ - uint32_t nw_addr OFP_PACKED; /* OFPAT_SET_NW_SRC/DST */ - uint16_t tp; /* OFPAT_SET_TP_SRC/DST */ - } arg; -}; -OFP_ASSERT(sizeof(struct ofp_action) == 8); +/* Action structure for OFPAT_SET_VLAN_VID. */ +struct ofp_action_vlan_vid { + uint16_t type; /* OFPAT_SET_VLAN_VID. */ + uint16_t len; /* Length is 8. */ + uint16_t vlan_vid; /* VLAN id. */ + uint8_t pad[2]; +}; +OFP_ASSERT(sizeof(struct ofp_action_vlan_vid) == 8); + +/* Action structure for OFPAT_SET_VLAN_PCP. */ +struct ofp_action_vlan_pcp { + uint16_t type; /* OFPAT_SET_VLAN_PCP. */ + uint16_t len; /* Length is 8. */ + uint8_t vlan_pcp; /* VLAN priority. */ + uint8_t pad[3]; +}; +OFP_ASSERT(sizeof(struct ofp_action_vlan_vid) == 8); + +/* Action structure for OFPAT_SET_DL_SRC/DST. */ +struct ofp_action_dl_addr { + uint16_t type; /* OFPAT_SET_DL_SRC/DST. */ + uint16_t len; /* Length is 16. */ + uint8_t dl_addr[OFP_ETH_ALEN]; /* Ethernet address. */ + uint8_t pad[6]; +}; +OFP_ASSERT(sizeof(struct ofp_action_dl_addr) == 16); + +/* Action structure for OFPAT_SET_NW_SRC/DST. */ +struct ofp_action_nw_addr { + uint16_t type; /* OFPAT_SET_TW_SRC/DST. */ + uint16_t len; /* Length is 8. */ + uint32_t nw_addr; /* IP address. */ +}; +OFP_ASSERT(sizeof(struct ofp_action_nw_addr) == 8); + +/* Action structure for OFPAT_SET_TP_SRC/DST. */ +struct ofp_action_tp_port { + uint16_t type; /* OFPAT_SET_TP_SRC/DST. */ + uint16_t len; /* Length is 8. */ + uint16_t tp_port; /* TCP/UDP port. */ + uint8_t pad[2]; +}; +OFP_ASSERT(sizeof(struct ofp_action_tp_port) == 8); + +/* Action header for OFPAT_VENDOR. The rest of the body is vendor-defined. */ +struct ofp_action_vendor_header { + uint16_t type; /* OFPAT_VENDOR. */ + uint16_t len; /* Length is 8. */ + uint32_t vendor; /* Vendor ID, which takes the same form + as in "struct ofp_vendor". */ +}; +OFP_ASSERT(sizeof(struct ofp_action_vendor_header) == 8); + +/* Action header that is common to all actions. The length includes the + * header and any padding used to make the action 64-bit aligned. + * NB: The length of an action *must* always be a multiple of eight. */ +struct ofp_action_header { + uint16_t type; /* One of OFPAT_*. */ + uint16_t len; /* Length of action, including this + header. This is the length of action, + including any padding to make it + 64-bit aligned. */ + uint8_t pad[4]; +}; +OFP_ASSERT(sizeof(struct ofp_action_header) == 8); /* Send packet (controller -> datapath). */ struct ofp_packet_out { struct ofp_header header; uint32_t buffer_id; /* ID assigned by datapath (-1 if none). */ uint16_t in_port; /* Packet's input port (OFPP_NONE if none). */ - uint16_t n_actions; /* Number of actions. */ - struct ofp_action actions[0]; /* Actions. */ + uint16_t actions_len; /* Size of action array in bytes. */ + struct ofp_action_header actions[0]; /* Actions. */ /* uint8_t data[0]; */ /* Packet data. The length is inferred from the length field in the header. (Only meaningful if buffer_id == -1.) */ @@ -319,6 +433,8 @@ OFP_ASSERT(sizeof(struct ofp_packet_out) == 16); enum ofp_flow_mod_command { OFPFC_ADD, /* New flow. */ + OFPFC_MODIFY, /* Modify all matching flows. */ + OFPFC_MODIFY_STRICT, /* Modify entry strictly matching wildcards */ OFPFC_DELETE, /* Delete all matching flows. */ OFPFC_DELETE_STRICT /* Strictly match wildcards and priority. */ }; @@ -330,12 +446,27 @@ enum ofp_flow_wildcards { OFPFW_DL_SRC = 1 << 2, /* Ethernet source address. */ OFPFW_DL_DST = 1 << 3, /* Ethernet destination address. */ OFPFW_DL_TYPE = 1 << 4, /* Ethernet frame type. */ - OFPFW_NW_SRC = 1 << 5, /* IP source address. */ - OFPFW_NW_DST = 1 << 6, /* IP destination address. */ - OFPFW_NW_PROTO = 1 << 7, /* IP protocol. */ - OFPFW_TP_SRC = 1 << 8, /* TCP/UDP source port. */ - OFPFW_TP_DST = 1 << 9, /* TCP/UDP destination port. */ - OFPFW_ALL = (1 << 10) - 1 + OFPFW_NW_PROTO = 1 << 5, /* IP protocol. */ + OFPFW_TP_SRC = 1 << 6, /* TCP/UDP source port. */ + OFPFW_TP_DST = 1 << 7, /* TCP/UDP destination port. */ + + /* IP source address wildcard bit count. 0 is exact match, 1 ignores the + * LSB, 2 ignores the 2 least-significant bits, ..., 32 and higher wildcard + * the entire field. This is the *opposite* of the usual convention where + * e.g. /24 indicates that 8 bits (not 24 bits) are wildcarded. */ + OFPFW_NW_SRC_SHIFT = 8, + OFPFW_NW_SRC_BITS = 6, + OFPFW_NW_SRC_MASK = ((1 << OFPFW_NW_SRC_BITS) - 1) << OFPFW_NW_SRC_SHIFT, + OFPFW_NW_SRC_ALL = 32 << OFPFW_NW_SRC_SHIFT, + + /* IP destination address wildcard bit count. Same format as source. */ + OFPFW_NW_DST_SHIFT = 14, + OFPFW_NW_DST_BITS = 6, + OFPFW_NW_DST_MASK = ((1 << OFPFW_NW_DST_BITS) - 1) << OFPFW_NW_DST_SHIFT, + OFPFW_NW_DST_ALL = 32 << OFPFW_NW_DST_SHIFT, + + /* Wildcard all fields. */ + OFPFW_ALL = ((1 << 20) - 1) }; /* Values below this cutoff are 802.3 packets and the two bytes @@ -349,18 +480,23 @@ enum ofp_flow_wildcards { */ #define OFP_DL_TYPE_NOT_ETH_TYPE 0x05ff +/* The VLAN id is 12-bits, so we can use the entire 16 bits to indicate + * special conditions. All ones indicates that no VLAN id was set. + */ +#define OFP_VLAN_NONE 0xffff + /* Fields to match against flows */ struct ofp_match { - uint16_t wildcards; /* Wildcard fields. */ + uint32_t wildcards; /* Wildcard fields. */ uint16_t in_port; /* Input switch port. */ uint8_t dl_src[OFP_ETH_ALEN]; /* Ethernet source address. */ uint8_t dl_dst[OFP_ETH_ALEN]; /* Ethernet destination address. */ uint16_t dl_vlan; /* Input VLAN. */ uint16_t dl_type; /* Ethernet frame type. */ + uint8_t nw_proto; /* IP protocol. */ + uint8_t pad; /* Align to 32-bits. */ uint32_t nw_src; /* IP source address. */ uint32_t nw_dst; /* IP destination address. */ - uint8_t nw_proto; /* IP protocol. */ - uint8_t pad[3]; /* Align to 32-bits. */ uint16_t tp_src; /* TCP/UDP source port. */ uint16_t tp_dst; /* TCP/UDP destination port. */ }; @@ -383,10 +519,12 @@ struct ofp_flow_mod { uint16_t idle_timeout; /* Idle time before discarding (seconds). */ uint16_t hard_timeout; /* Max time before discarding (seconds). */ uint16_t priority; /* Priority level of flow entry. */ - uint32_t buffer_id; /* Buffered packet to apply to (or -1). */ + uint32_t buffer_id; /* Buffered packet to apply to (or -1). + Not meaningful for OFPFC_DELETE*. */ uint32_t reserved; /* Reserved for future use. */ - struct ofp_action actions[0]; /* The number of actions is inferred from - the length field in the header. */ + struct ofp_action_header actions[0]; /* The action length is inferred + from the length field in the + header. */ }; OFP_ASSERT(sizeof(struct ofp_flow_mod) == 60); @@ -412,7 +550,51 @@ struct ofp_flow_expired { }; OFP_ASSERT(sizeof(struct ofp_flow_expired) == 72); -/* Error message (datapath -> controller). */ +/* Values for 'type' in ofp_error_message. These values are immutable: they + * will not change in future versions of the protocol (although new values may + * be added). */ +enum ofp_error_type { + OFPET_HELLO_FAILED, /* Hello protocol failed. */ + OFPET_BAD_REQUEST, /* Request was not understood. */ + OFPET_BAD_ACTION, /* Error in action description. */ + OFPET_FLOW_MOD_FAILED /* Problem modifying flow entry. */ +}; + +/* ofp_error_msg 'code' values for OFPET_HELLO_FAILED. 'data' contains an + * ASCII text string that may give failure details. */ +enum ofp_hello_failed_code { + OFPHFC_INCOMPATIBLE /* No compatible version. */ +}; + +/* ofp_error_msg 'code' values for OFPET_BAD_REQUEST. 'data' contains at least + * the first 64 bytes of the failed request. */ +enum ofp_bad_request_code { + OFPBRC_BAD_VERSION, /* ofp_header.version not supported. */ + OFPBRC_BAD_TYPE, /* ofp_header.type not supported. */ + OFPBRC_BAD_STAT, /* ofp_stats_request.type not supported. */ + OFPBRC_BAD_VENDOR, /* Vendor not supported (in ofp_vendor or + * ofp_stats_request or ofp_stats_reply). */ + OFPBRC_BAD_SUBTYPE /* Vendor subtype not supported. */ +}; + +/* ofp_error_msg 'code' values for OFPET_BAD_ACTION. 'data' contains at least + * the first 64 bytes of the failed request. */ +enum ofp_bad_action_code { + OFPBAC_BAD_TYPE, /* Unknown action type. */ + OFPBAC_BAD_LEN, /* Length problem in actions. */ + OFPBAC_BAD_VENDOR, /* Unknown vendor id specified. */ + OFPBAC_BAD_VENDOR_TYPE, /* Unknown action type for vendor id. */ + OFPBAC_BAD_OUT_PORT, /* Problem validating output action. */ + OFPBAC_BAD_ARGUMENT /* Bad action argument. */ +}; + +/* ofp_error_msg 'code' values for OFPET_FLOW_MOD_FAILED. 'data' contains + * at least the first 64 bytes of the failed request. */ +enum ofp_flow_mod_failed_code { + OFPFMFC_ALL_TABLES_FULL /* Flow not added because of full tables. */ +}; + +/* OFPT_ERROR: Error message (datapath -> controller). */ struct ofp_error_msg { struct ofp_header header; @@ -424,6 +606,11 @@ struct ofp_error_msg { OFP_ASSERT(sizeof(struct ofp_error_msg) == 12); enum ofp_stats_types { + /* Description of this OpenFlow switch. + * The request body is empty. + * The reply body is struct ofp_desc_stats. */ + OFPST_DESC, + /* Individual flow statistics. * The request body is struct ofp_flow_stats_request. * The reply body is an array of struct ofp_flow_stats. */ @@ -442,7 +629,13 @@ enum ofp_stats_types { /* Physical port statistics. * The request body is empty. * The reply body is an array of struct ofp_port_stats. */ - OFPST_PORT + OFPST_PORT, + + /* Vendor extension. + * The request and reply bodies begin with a 32-bit vendor ID, which takes + * the same form as in "struct ofp_vendor". The request and reply bodies + * are otherwise vendor-defined. */ + OFPST_VENDOR = 0xffff }; struct ofp_stats_request { @@ -454,7 +647,7 @@ struct ofp_stats_request { OFP_ASSERT(sizeof(struct ofp_stats_request) == 12); enum ofp_stats_reply_flags { - OFPSF_REPLY_MORE = 1 << 0, /* More replies to follow */ + OFPSF_REPLY_MORE = 1 << 0 /* More replies to follow */ }; struct ofp_stats_reply { @@ -465,6 +658,18 @@ struct ofp_stats_reply { }; OFP_ASSERT(sizeof(struct ofp_stats_reply) == 12); +#define DESC_STR_LEN 256 +#define SERIAL_NUM_LEN 32 +/* Body of reply to OFPST_DESC request. Each entry is a NULL-terminated + * ASCII string. */ +struct ofp_desc_stats { + char mfr_desc[DESC_STR_LEN]; /* Manufacturer description. */ + char hw_desc[DESC_STR_LEN]; /* Hardware description. */ + char sw_desc[DESC_STR_LEN]; /* Software description. */ + char serial_num[SERIAL_NUM_LEN]; /* Serial number. */ +}; +OFP_ASSERT(sizeof(struct ofp_desc_stats) == 800); + /* Body for ofp_stats_request of type OFPST_FLOW. */ struct ofp_flow_stats_request { struct ofp_match match; /* Fields to match */ @@ -488,7 +693,7 @@ struct ofp_flow_stats { uint16_t pad2[3]; /* Pad to 64 bits. */ uint64_t packet_count; /* Number of packets in flow. */ uint64_t byte_count; /* Number of bytes in flow. */ - struct ofp_action actions[0]; /* Actions. */ + struct ofp_action_header actions[0]; /* Actions. */ }; OFP_ASSERT(sizeof(struct ofp_flow_stats) == 72); @@ -512,17 +717,20 @@ OFP_ASSERT(sizeof(struct ofp_aggregate_stats_reply) == 24); /* Body of reply to OFPST_TABLE request. */ struct ofp_table_stats { - uint8_t table_id; + uint8_t table_id; /* Identifier of table. Lower numbered tables + are consulted first. */ uint8_t pad[3]; /* Align to 32-bits */ char name[OFP_MAX_TABLE_NAME_LEN]; + uint32_t wildcards; /* Bitmap of OFPFW_* wildcards that are + supported by the table. */ uint32_t max_entries; /* Max number of entries supported */ uint32_t active_count; /* Number of active entries */ - uint8_t pad2[4]; /* Align to 64 bits. */ + uint64_t lookup_count; /* Number of packets looked up in table */ uint64_t matched_count; /* Number of packets that hit table */ }; -OFP_ASSERT(sizeof(struct ofp_table_stats) == 56); +OFP_ASSERT(sizeof(struct ofp_table_stats) == 64); -/* Statistics about a particular port. If a counter is unsupported, set +/* Body of reply to OFPST_PORT request. If a counter is unsupported, set * the field to all ones. */ struct ofp_port_stats { uint16_t port_no; @@ -545,4 +753,15 @@ struct ofp_port_stats { }; OFP_ASSERT(sizeof(struct ofp_port_stats) == 104); +/* Vendor extension. */ +struct ofp_vendor_header { + struct ofp_header header; /* Type OFPT_VENDOR. */ + uint32_t vendor; /* Vendor ID: + * - MSB 0: low-order bytes are IEEE OUI. + * - MSB != 0: defined by OpenFlow + * consortium. */ + /* Vendor-defined arbitrary additional data. */ +}; +OFP_ASSERT(sizeof(struct ofp_vendor_header) == 12); + #endif /* openflow.h */