X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=kernel%2Ftime.c;h=7e09cfed2f9807e9d8ecb92bd218b5081d4005c1;hb=d9dd0763fcad5be8072c76ebf3e0cfa0de04cb00;hp=1ea60b2d0feff9a804ecba565c286337c98f8453;hpb=3944158a6d33f94668dbd6bdc32ff5c67bb53ec2;p=linux-2.6.git diff --git a/kernel/time.c b/kernel/time.c index 1ea60b2d0..7e09cfed2 100644 --- a/kernel/time.c +++ b/kernel/time.c @@ -61,7 +61,7 @@ asmlinkage long sys_time(time_t __user * tloc) time_t i; struct timeval tv; - do_gettimeofday(&tv); + vx_gettimeofday(&tv); i = tv.tv_sec; if (tloc) { @@ -92,7 +92,7 @@ asmlinkage long sys_stime(time_t __user *tptr) if (err) return err; - do_settimeofday(&tv); + vx_settimeofday(&tv); return 0; } @@ -102,7 +102,7 @@ asmlinkage long sys_gettimeofday(struct timeval __user *tv, struct timezone __us { if (likely(tv != NULL)) { struct timeval ktv; - do_gettimeofday(&ktv); + vx_gettimeofday(&ktv); if (copy_to_user(tv, &ktv, sizeof(ktv))) return -EFAULT; } @@ -176,7 +176,7 @@ int do_sys_settimeofday(struct timespec *tv, struct timezone *tz) /* SMP safe, again the code in arch/foo/time.c should * globally block out interrupts when it runs. */ - return do_settimeofday(tv); + return vx_settimeofday(tv); } return 0; } @@ -202,181 +202,6 @@ asmlinkage long sys_settimeofday(struct timeval __user *tv, return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL); } -/* we call this to notify the arch when the clock is being - * controlled. If no such arch routine, do nothing. - */ -void __attribute__ ((weak)) notify_arch_cmos_timer(void) -{ - /* Workaround http://gcc.gnu.org/PR27781 */ - asm volatile (""); - return; -} - -/* adjtimex mainly allows reading (and writing, if superuser) of - * kernel time-keeping variables. used by xntpd. - */ -int do_adjtimex(struct timex *txc) -{ - long ltemp, mtemp, save_adjust; - int result; - - /* In order to modify anything, you gotta be super-user! */ - if (txc->modes && !capable(CAP_SYS_TIME)) - return -EPERM; - - /* Now we validate the data before disabling interrupts */ - - if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) - /* singleshot must not be used with any other mode bits */ - if (txc->modes != ADJ_OFFSET_SINGLESHOT) - return -EINVAL; - - if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET)) - /* adjustment Offset limited to +- .512 seconds */ - if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE ) - return -EINVAL; - - /* if the quartz is off by more than 10% something is VERY wrong ! */ - if (txc->modes & ADJ_TICK) - if (txc->tick < 900000/USER_HZ || - txc->tick > 1100000/USER_HZ) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - result = time_state; /* mostly `TIME_OK' */ - - /* Save for later - semantics of adjtime is to return old value */ - save_adjust = time_next_adjust ? time_next_adjust : time_adjust; - -#if 0 /* STA_CLOCKERR is never set yet */ - time_status &= ~STA_CLOCKERR; /* reset STA_CLOCKERR */ -#endif - /* If there are input parameters, then process them */ - if (txc->modes) - { - if (txc->modes & ADJ_STATUS) /* only set allowed bits */ - time_status = (txc->status & ~STA_RONLY) | - (time_status & STA_RONLY); - - if (txc->modes & ADJ_FREQUENCY) { /* p. 22 */ - if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) { - result = -EINVAL; - goto leave; - } - time_freq = txc->freq; - } - - if (txc->modes & ADJ_MAXERROR) { - if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) { - result = -EINVAL; - goto leave; - } - time_maxerror = txc->maxerror; - } - - if (txc->modes & ADJ_ESTERROR) { - if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) { - result = -EINVAL; - goto leave; - } - time_esterror = txc->esterror; - } - - if (txc->modes & ADJ_TIMECONST) { /* p. 24 */ - if (txc->constant < 0) { /* NTP v4 uses values > 6 */ - result = -EINVAL; - goto leave; - } - time_constant = txc->constant; - } - - if (txc->modes & ADJ_OFFSET) { /* values checked earlier */ - if (txc->modes == ADJ_OFFSET_SINGLESHOT) { - /* adjtime() is independent from ntp_adjtime() */ - if ((time_next_adjust = txc->offset) == 0) - time_adjust = 0; - } - else if (time_status & STA_PLL) { - ltemp = txc->offset; - - /* - * Scale the phase adjustment and - * clamp to the operating range. - */ - if (ltemp > MAXPHASE) - time_offset = MAXPHASE << SHIFT_UPDATE; - else if (ltemp < -MAXPHASE) - time_offset = -(MAXPHASE << SHIFT_UPDATE); - else - time_offset = ltemp << SHIFT_UPDATE; - - /* - * Select whether the frequency is to be controlled - * and in which mode (PLL or FLL). Clamp to the operating - * range. Ugly multiply/divide should be replaced someday. - */ - - if (time_status & STA_FREQHOLD || time_reftime == 0) - time_reftime = xtime.tv_sec; - mtemp = xtime.tv_sec - time_reftime; - time_reftime = xtime.tv_sec; - if (time_status & STA_FLL) { - if (mtemp >= MINSEC) { - ltemp = (time_offset / mtemp) << (SHIFT_USEC - - SHIFT_UPDATE); - time_freq += shift_right(ltemp, SHIFT_KH); - } else /* calibration interval too short (p. 12) */ - result = TIME_ERROR; - } else { /* PLL mode */ - if (mtemp < MAXSEC) { - ltemp *= mtemp; - time_freq += shift_right(ltemp,(time_constant + - time_constant + - SHIFT_KF - SHIFT_USEC)); - } else /* calibration interval too long (p. 12) */ - result = TIME_ERROR; - } - time_freq = min(time_freq, time_tolerance); - time_freq = max(time_freq, -time_tolerance); - } /* STA_PLL */ - } /* txc->modes & ADJ_OFFSET */ - if (txc->modes & ADJ_TICK) { - tick_usec = txc->tick; - tick_nsec = TICK_USEC_TO_NSEC(tick_usec); - } - } /* txc->modes */ -leave: if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0) - result = TIME_ERROR; - - if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT) - txc->offset = save_adjust; - else { - txc->offset = shift_right(time_offset, SHIFT_UPDATE); - } - txc->freq = time_freq; - txc->maxerror = time_maxerror; - txc->esterror = time_esterror; - txc->status = time_status; - txc->constant = time_constant; - txc->precision = time_precision; - txc->tolerance = time_tolerance; - txc->tick = tick_usec; - - /* PPS is not implemented, so these are zero */ - txc->ppsfreq = 0; - txc->jitter = 0; - txc->shift = 0; - txc->stabil = 0; - txc->jitcnt = 0; - txc->calcnt = 0; - txc->errcnt = 0; - txc->stbcnt = 0; - write_sequnlock_irq(&xtime_lock); - do_gettimeofday(&txc->time); - notify_arch_cmos_timer(); - return(result); -} - asmlinkage long sys_adjtimex(struct timex __user *txc_p) { struct timex txc; /* Local copy of parameter */ @@ -534,7 +359,7 @@ void getnstimeofday(struct timespec *tv) { struct timeval x; - do_gettimeofday(&x); + vx_gettimeofday(&x); tv->tv_sec = x.tv_sec; tv->tv_nsec = x.tv_usec * NSEC_PER_USEC; }