X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=setup-egre-link;h=56771f60175e436912586a1dacd32312e2236059;hb=8b07d3cdcc4cbe4eadc0a06175912666c9775d6d;hp=829756df572993dda9d74493758319d1baa6f509;hpb=e4d85917a4dc6fe4cd3dd55abb8eb1f957468d15;p=nodemanager-topo.git

diff --git a/setup-egre-link b/setup-egre-link
index 829756d..56771f6 100755
--- a/setup-egre-link
+++ b/setup-egre-link
@@ -9,41 +9,28 @@ REMOTE=$3
 KEY=$4
 RATE=$5
 VIRTIP=$6
+VIRTNET=$7
 
+SUBNET=`expr match "$VIRTNET" '.*\(/[0-9]*\)'`
 LINK=${KEY}x${NODEID}
 
 modprobe ip_gre
-modprobe etun
 
 ### Setup EGRE tunnel
 EGRE=d$LINK
-$IP tunnel add $EGRE  mode gre/eth remote $REMOTE key $KEY ttl 64
+$IP tunnel add $EGRE  mode gre type eth remote $REMOTE key $KEY ttl 64
 $IP link set $EGRE up
 
-### Setup etun
-ETUN0=a$LINK
-ETUN1=b$LINK
-echo $ETUN0,$ETUN1 > /sys/module/etun/parameters/newif
-ifconfig $ETUN0 mtu 1458 up
-ifconfig $ETUN1 up
-
-### Setup bridge
-BRIDGE=c$LINK
-brctl addbr $BRIDGE
-brctl addif $BRIDGE $EGRE 
-brctl addif $BRIDGE $ETUN1
-ifconfig $BRIDGE up
-
-### Setup iptables so that packets are visible in the vserver
-iptables -t mangle -A FORWARD -o $BRIDGE -j MARK --set-mark $SLICEID
+### Setup macvlan
+MACV=a$LINK
+ip link add link $EGRE $MACV type macvlan
 
 ### Put a process in the vserver so we can move the interface there
-su $SLICE -c "sleep 60" &
-sleep 1
-PID=`su $SLICE -c "pgrep sleep"`
-chcontext --ctx 1 -- echo $PID > /sys/class/net/$ETUN0/new_ns_pid 
-sleep 1
-su $SLICE -c "sudo /sbin/ifconfig $ETUN0 $VIRTIP/24 up"
+su $SLICE -c "sleep 30 &"
+PID=`su $SLICE -c "pgrep -n sleep"`
+$IP link set $MACV netns $PID
+naddress --add --nid $SLICEID --ip ${VIRTIP}${SUBNET}
+su $SLICE -c "sudo /sbin/ifconfig $MACV ${VIRTIP}${SUBNET} mtu 1458 up"
 
 ### Set rate
 tc qdisc add dev $EGRE root handle 1: htb default 10