X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=sound%2Foss%2Fcs46xx.c;h=147c8a951137a4452fb059a66dab5cbfbc381c7d;hb=refs%2Fheads%2Fvserver;hp=5195bf933cb893dffb481ae646329cc11ce9a46c;hpb=16c70f8c1b54b61c3b951b6fb220df250fe09b32;p=linux-2.6.git

diff --git a/sound/oss/cs46xx.c b/sound/oss/cs46xx.c
index 5195bf933..147c8a951 100644
--- a/sound/oss/cs46xx.c
+++ b/sound/oss/cs46xx.c
@@ -91,12 +91,13 @@
 #include <linux/poll.h>
 #include <linux/ac97_codec.h>
 #include <linux/mutex.h>
+#include <linux/mm.h>
 
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <asm/uaccess.h>
 
-#include "cs46xxpm-24.h"
+#include "cs46xxpm.h"
 #include "cs46xx_wrapper-24.h"
 #include "cs461x.h"
 
@@ -389,8 +390,10 @@ static int cs_hardware_init(struct cs_card *card);
 static int cs46xx_powerup(struct cs_card *card, unsigned int type);
 static int cs461x_powerdown(struct cs_card *card, unsigned int type, int suspendflag);
 static void cs461x_clear_serial_FIFOs(struct cs_card *card, int type);
+#ifdef CONFIG_PM
 static int cs46xx_suspend_tbl(struct pci_dev *pcidev, pm_message_t state);
 static int cs46xx_resume_tbl(struct pci_dev *pcidev);
+#endif
 
 #if CSDEBUG
 
@@ -777,7 +780,7 @@ static unsigned int cs_set_adc_rate(struct cs_state *state, unsigned int rate)
 		rate = 48000 / 9;
 
 	/*
-	 *  We can not capture at at rate greater than the Input Rate (48000).
+	 *  We cannot capture at at rate greater than the Input Rate (48000).
 	 *  Return an error if an attempt is made to stray outside that limit.
 	 */
 	if (rate > 48000)
@@ -1611,7 +1614,7 @@ static void cs_handle_midi(struct cs_card *card)
                 wake_up(&card->midi.owait);
 }
 
-static irqreturn_t cs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t cs_interrupt(int irq, void *dev_id)
 {
 	struct cs_card *card = (struct cs_card *)dev_id;
 	/* Single channel card */
@@ -2980,7 +2983,7 @@ static void clkrun_hack(struct cs_card *card, int change)
 	
 	card->active+=change;
 	
-	acpi_dev = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
+	acpi_dev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
 	if (acpi_dev == NULL)
 		return;		/* Not a thinkpad thats for sure */
 
@@ -3006,6 +3009,7 @@ static void clkrun_hack(struct cs_card *card, int change)
 				change,card->active));
 		outw(control&~0x2000, port+0x10);
 	}
+	pci_dev_put(acpi_dev);
 }
 
 	
@@ -4751,8 +4755,8 @@ static int cs_hardware_init(struct cs_card *card)
 	mdelay(5 * cs_laptop_wait);		/* Shouldnt be needed ?? */
 	
 /*
-* If we are resuming under 2.2.x then we can not schedule a timeout.
-* so, just spin the CPU.
+* If we are resuming under 2.2.x then we cannot schedule a timeout,
+* so just spin the CPU.
 */
 	if (card->pm.flags & CS46XX_PM_IDLE) {
 	/*
@@ -5389,8 +5393,10 @@ static struct pci_driver cs46xx_pci_driver = {
 	.id_table = cs46xx_pci_tbl,
 	.probe	  = cs46xx_probe,
 	.remove	  = __devexit_p(cs46xx_remove),
-	.suspend  = CS46XX_SUSPEND_TBL,
-	.resume	  = CS46XX_RESUME_TBL,
+#ifdef CONFIG_PM
+	.suspend  = cs46xx_suspend_tbl,
+	.resume	  = cs46xx_resume_tbl,
+#endif
 };
 
 static int __init cs46xx_init_module(void)
@@ -5420,7 +5426,7 @@ static void __exit cs46xx_cleanup_module(void)
 module_init(cs46xx_init_module);
 module_exit(cs46xx_cleanup_module);
 
-#if CS46XX_ACPI_SUPPORT
+#ifdef CONFIG_PM
 static int cs46xx_suspend_tbl(struct pci_dev *pcidev, pm_message_t state)
 {
 	struct cs_card *s = PCI_GET_DRIVER_DATA(pcidev);