X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=tests%2Flearn.at;h=47c1d3288788033e6c316f03c1bfdf843a35bbb4;hb=ea7655d9f9d38a3af7250de8ba0b89115b5f4a5e;hp=314baaf74568be0207ebfee6ed2f3cf317bac21c;hpb=b9718b7ba7828c702a67d5411f935b263bb9c795;p=sliver-openvswitch.git

diff --git a/tests/learn.at b/tests/learn.at
index 314baaf74..47c1d3288 100644
--- a/tests/learn.at
+++ b/tests/learn.at
@@ -10,7 +10,7 @@ AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
 [[usable protocols: any
 chosen protocol: OpenFlow10-table_id
 OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1)
-OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0x000a->NXM_NX_REG0[5..10])
+OFPT_FLOW_MOD (xid=0x2): ADD actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[],load:0xa->NXM_NX_REG0[5..10])
 OFPT_FLOW_MOD (xid=0x3): ADD actions=learn(table=1,idle_timeout=10,hard_timeout=20,fin_idle_timeout=5,fin_hard_timeout=10,priority=10,cookie=0xfedcba9876543210,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
 ]])
 AT_CLEANUP
@@ -24,7 +24,7 @@ table=0 actions=learn(table=1,hard_timeout=10, NXM_OF_VLAN_TCI[0..11],output:NXM
 table=1 priority=0 actions=flood
 ]])
 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
-[[usable protocols: OpenFlow10+table_id,NXM+table_id
+[[usable protocols: OXM,OpenFlow10+table_id,NXM+table_id
 chosen protocol: OpenFlow10+table_id
 OFPT_FLOW_MOD (xid=0x1): ADD table:255 actions=learn(table=1,in_port=99,NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],load:NXM_OF_IN_PORT[]->NXM_NX_REG1[16..31])
 OFPT_FLOW_MOD (xid=0x2): ADD table:255 actions=learn(table=1,NXM_OF_VLAN_TCI[0..11],NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[],output:NXM_OF_IN_PORT[])
@@ -37,12 +37,12 @@ AT_SETUP([learning action - satisfied prerequisites])
 AT_DATA([flows.txt],
 [[actions=learn(eth_type=0x800,load:5->NXM_OF_IP_DST[])
 ip,actions=learn(load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
-ip,actions=learn(eth_type=0x800,NXM_OF_IP_DST[])
+ip,actions=learn(eth_type=0x800,OXM_OF_IPV4_DST[])
 ]])
 AT_CHECK([ovs-ofctl parse-flows flows.txt], [0],
 [[usable protocols: any
 chosen protocol: OpenFlow10-table_id
-OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x00000005->NXM_OF_IP_DST[])
+OFPT_FLOW_MOD (xid=0x1): ADD actions=learn(table=1,eth_type=0x800,load:0x5->NXM_OF_IP_DST[])
 OFPT_FLOW_MOD (xid=0x2): ADD ip actions=learn(table=1,load:NXM_OF_IP_DST[]->NXM_NX_REG1[])
 OFPT_FLOW_MOD (xid=0x3): ADD ip actions=learn(table=1,eth_type=0x800,NXM_OF_IP_DST[])
 ]])
@@ -61,9 +61,9 @@ AT_CLEANUP
 
 AT_SETUP([learning action - standard VLAN+MAC learning])
 OVS_VSWITCHD_START(
-  [add-port br0 eth0 -- set Interface eth0 type=dummy -- \
-   add-port br0 eth1 -- set Interface eth1 type=dummy -- \
-   add-port br0 eth2 -- set Interface eth2 type=dummy])
+  [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1 -- \
+   add-port br0 p2 -- set Interface p2 type=dummy ofport_request=2 -- \
+   add-port br0 p3 -- set Interface p3 type=dummy ofport_request=3])
 # Set up flow table for VLAN+MAC learning.
 AT_DATA([flows.txt], [[
 table=0 actions=learn(table=1, hard_timeout=60, NXM_OF_VLAN_TCI[0..11], NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[]), resubmit(,1)
@@ -72,9 +72,14 @@ table=1 priority=0 actions=flood
 AT_CHECK([ovs-ofctl add-flows br0 flows.txt])
 
 # Trace an ARP packet arriving on port 3, to create a MAC learning entry.
-AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [stdout])
-AT_CHECK([tail -1 stdout], [0], [Datapath actions: 2,0,1
-])
+flow="in_port(3),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="1,2,100"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 
 # Check for the MAC learning entry.
 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
@@ -98,9 +103,14 @@ NXST_FLOW reply:
 ])
 
 # Trace a packet arrival that updates the first learned MAC entry.
-AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [stdout])
-AT_CHECK([tail -1 stdout], [0], [Datapath actions: 3,0,1
-])
+flow="in_port(2),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="1,3,100"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 
 # Check that the MAC learning entry was updated.
 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
@@ -114,16 +124,21 @@ AT_CLEANUP
 
 AT_SETUP([learning action - TCPv4 port learning])
 OVS_VSWITCHD_START(
-  [add-port br0 eth0 -- set Interface eth0 type=dummy -- \
-   add-port br0 eth1 -- set Interface eth1 type=dummy -- \
-   add-port br0 eth2 -- set Interface eth2 type=dummy])
+  [add-port br0 p1 -- set Interface p1 type=dummy -- \
+   add-port br0 p2 -- set Interface p2 type=dummy -- \
+   add-port br0 p3 -- set Interface p3 type=dummy])
 # Set up flow table for TCPv4 port learning.
 AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp actions=learn(table=1, hard_timeout=60, eth_type=0x800, nw_proto=6, NXM_OF_IP_SRC[]=NXM_OF_IP_DST[], NXM_OF_IP_DST[]=NXM_OF_IP_SRC[], NXM_OF_TCP_SRC[]=NXM_OF_TCP_DST[], NXM_OF_TCP_DST[]=NXM_OF_TCP_SRC[]), flood']])
 
 # Trace a TCPv4 packet arriving on port 3.
-AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=40000,dst=80)' -generate], [0], [stdout])
-AT_CHECK([tail -1 stdout], [0], [Datapath actions: 2,0,1
-])
+flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x0800),ipv4(src=192.168.0.2,dst=192.168.0.1,proto=6,tos=0,ttl=64,frag=no),tcp(src=40000,dst=80)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="1,2,100"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 
 # Check for the learning entry.
 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip | sort], [0], [dnl
@@ -135,18 +150,23 @@ AT_CLEANUP
 
 AT_SETUP([learning action - TCPv6 port learning])
 OVS_VSWITCHD_START(
-  [add-port br0 eth0 -- set Interface eth0 type=dummy -- \
-   add-port br0 eth1 -- set Interface eth1 type=dummy -- \
-   add-port br0 eth2 -- set Interface eth2 type=dummy])
+  [add-port br0 p1 -- set Interface p1 type=dummy -- \
+   add-port br0 p2 -- set Interface p2 type=dummy -- \
+   add-port br0 p3 -- set Interface p3 type=dummy])
 # Set up flow table for TCPv6 port learning.
 # Also add a 128-bit-wide "load" action and a 128-bit literal match to check
 # that they work.
 AT_CHECK([[ovs-ofctl add-flow br0 'table=0 tcp6 actions=learn(table=1, hard_timeout=60, eth_type=0x86dd, nw_proto=6, NXM_NX_IPV6_SRC[]=NXM_NX_IPV6_DST[], ipv6_dst=2001:0db8:85a3:0000:0000:8a2e:0370:7334, NXM_OF_TCP_SRC[]=NXM_OF_TCP_DST[], NXM_OF_TCP_DST[]=NXM_OF_TCP_SRC[], load(0x20010db885a308d313198a2e03707348->NXM_NX_IPV6_DST[])), flood']])
 
 # Trace a TCPv6 packet arriving on port 3.
-AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x86dd),ipv6(src=fec0::2,dst=fec0::1,label=0,proto=6,tclass=0,hlimit=255,frag=no),tcp(src=40000,dst=80)' -generate], [0], [stdout])
-AT_CHECK([tail -1 stdout], [0], [Datapath actions: 2,0,1
-])
+flow="in_port(3),eth(src=50:54:00:00:00:05,dst=50:54:00:00:00:06),eth_type(0x86dd),ipv6(src=fec0::2,dst=fec0::1,label=0,proto=6,tclass=0,hlimit=255,frag=no),tcp(src=40000,dst=80)"
+AT_CHECK([ovs-appctl ofproto/trace br0 "$flow" -generate], [0], [stdout])
+actual=`tail -1 stdout | sed 's/Datapath actions: //'`
+
+expected="1,2,100"
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$expected"], [0], [stdout])
+mv stdout expout
+AT_CHECK([ovs-dpctl normalize-actions "$flow" "$actual"], [0], [expout])
 
 # Check for the learning entry.
 AT_CHECK([ovs-ofctl dump-flows br0 | ofctl_strip | sort], [0], [dnl
@@ -161,7 +181,8 @@ AT_SETUP([learning action - fin_timeout feature])
 # This is a totally artificial use of the "learn" action.  The only purpose
 # is to check that specifying fin_idle_timeout or fin_hard_timeout causes
 # a corresponding fin_timeout action to end up in the learned flows.
-OVS_VSWITCHD_START
+OVS_VSWITCHD_START(
+    [add-port br0 p1 -- set Interface p1 type=dummy ofport_request=1])
 AT_CHECK([[ovs-ofctl add-flow br0 'actions=learn(fin_hard_timeout=10, fin_idle_timeout=5, NXM_OF_ETH_DST[]=NXM_OF_ETH_SRC[], output:NXM_OF_IN_PORT[])']])
 AT_CHECK([ovs-appctl ofproto/trace br0 'in_port(1),eth(src=50:54:00:00:00:05,dst=ff:ff:ff:ff:ff:ff),eth_type(0x0806),arp(sip=192.168.0.1,tip=192.168.0.2,op=1,sha=50:54:00:00:00:05,tha=00:00:00:00:00:00)' -generate], [0], [ignore])
 AT_CHECK([ovs-ofctl dump-flows br0 table=1 | ofctl_strip], [0],