X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=utilities%2Fovs-dpctl.8.in;h=bf7f97f6d280d63557c6ec76f83e2276e0232264;hb=e1154f713ec8f47ff38979d76e9456b49b0bc264;hp=5b5941bedf403c22b4d934892fb34a399ceacc4a;hpb=007948177581f3b3dad188221593d0e4bdca6ba0;p=sliver-openvswitch.git

diff --git a/utilities/ovs-dpctl.8.in b/utilities/ovs-dpctl.8.in
index 5b5941bed..bf7f97f6d 100644
--- a/utilities/ovs-dpctl.8.in
+++ b/utilities/ovs-dpctl.8.in
@@ -34,11 +34,12 @@ default provider \fBsystem\fR is assumed.
 The following commands manage datapaths.
 .
 .TP
-\fBadd\-dp \fIdp\fR [\fInetdev\fR...]
+\fBadd\-dp \fIdp\fR [\fInetdev\fR[\fB,\fIoption\fR]...]
 Creates datapath \fIdp\fR, with a local port also named \fIdp\fR.
 This will fail if a network device \fIdp\fR already exists.
 .IP
-If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the datapath.
+If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the
+new datapath, just as if \fBadd\-if\fR was specified.
 .
 .TP
 \fBdel\-dp \fIdp\fR
@@ -68,6 +69,14 @@ Adds an arbitrary key-value option to the port's configuration.
 \fBovs\-vswitchd.conf.db\fR(5) documents the available port types and
 options.
 .
+.IP "\fBset\-if \fIdp port\fR[\fB,\fIoption\fR]..."
+Reconfigures each \fIport\fR in \fIdp\fR as specified.  An
+\fIoption\fR of the form \fIkey\fB=\fIvalue\fR adds the specified
+key-value option to the port or overrides an existing key's value.  An
+\fIoption\fR of the form \fIkey\fB=\fR, that is, without a value,
+deletes the key-value named \fIkey\fR.  The type of a port cannot be
+changed, so \fBtype=\fItype\fR is only allowed if \fItype\fR is the
+port's existing type.
 .TP
 \fBdel\-if \fIdp netdev\fR...
 Removes each \fInetdev\fR from the list of network devices datapath
@@ -118,34 +127,7 @@ signal.
 .so lib/vlog.man
 .so lib/common.man
 .
-.SH EXAMPLES
-.
-A typical \fBovs\-dpctl\fR command sequence for controlling an
-Open vSwitch kernel module:
-.
-.TP
-\fBovs\-dpctl add\-dp dp0\fR
-Creates datapath number 0.
-.
-.TP
-\fBovs\-dpctl add\-if dp0 eth0 eth1\fR
-Adds two network devices to the new datapath.
-.
-.PP
-At this point one would ordinarily start \fBovs\-openflowd\fR(8) on
-\fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch.  Then, when
-the switch and the datapath is no longer needed:
-.
-.TP
-\fBovs\-dpctl del\-if dp0 eth0 eth1\fR
-Removes network devices from the datapath.
-.
-.TP
-\fBovs\-dpctl del\-dp dp0\fR
-Deletes the datapath.
-.
 .SH "SEE ALSO"
 .
 .BR ovs\-appctl (8),
-.BR ovs\-openflowd (8),
 .BR ovs\-vswitchd (8)