X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=utilities%2Fovs-ofctl.8.in;h=cf4ead96da605849d43aeb7fd1d796d1a1b2a328;hb=2426f67a96097230befdf1242041f6cf39b91e5d;hp=2e2b38b38cb75ee870ec7bbeb62f438402fd260a;hpb=1d87357a1322c2faa290452c08c7f794c0be848b;p=sliver-openvswitch.git

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index 2e2b38b38..cf4ead96d 100644
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -26,24 +26,12 @@ connecting to an OpenFlow switch.  The following connection methods
 are supported:
 
 .RS
-.IP "\fBssl:\fIip\fR[\fB:\fIport\fR]"
-The specified SSL \fIport\fR (default: 6633) on the host at the given
-\fIip\fR, which must be expressed as an IP address (not a DNS name).
-The \fB--private-key\fR, \fB--certificate\fR, and \fB--ca-cert\fR
-options are mandatory when this form is used.
-
-.IP "\fBtcp:\fIip\fR[\fB:\fIport\fR]"
-The specified TCP \fIport\fR (default: 6633) on the host at the given
-\fIip\fR, which must be expressed as an IP address (not a DNS name).
-
-.TP
-\fBunix:\fIfile\fR
-The Unix domain server socket named \fIfile\fR.  
-
+.so lib/vconn-active.man
+.
 .IP "\fIfile\fR"
 This is short for \fBunix:\fIfile\fR, as long as \fIfile\fR does not
 contain a colon.
-
+.
 .IP \fIdp\fR
 This is short for \fBunix:@RUNDIR@/\fIdp\fB.mgmt\fR, as long as
 \fIdp\fR does not contain a colon.
@@ -164,15 +152,6 @@ flow expirations.
 This command may be useful for debugging switch or controller
 implementations.
 
-.TP
-\fBexecute \fIswitch command \fR[\fIarg\fR...]
-Sends a request to \fIswitch\fR to execute \fIcommand\fR along with
-each \fIarg\fR, if any, then waits for the command to complete and
-reports its completion status on \fBstderr\fR and its output, if any,
-on \fBstdout\fR.  The set of available commands and their argument is
-switch-dependent.  (This command uses a Nicira extension to OpenFlow
-that may not be available on all switches.)
-
 .SS "OpenFlow Switch and Controller Commands"
 
 The following commands, like those in the previous section, may be
@@ -352,6 +331,18 @@ Sets the source Ethernet address to \fImac\fR.
 
 .IP \fBmod_dl_dst\fB:\fImac\fR
 Sets the destination Ethernet address to \fImac\fR.
+
+.IP \fBmod_nw_src\fB:\fIip\fR
+Sets the IPv4 source address to \fIip\fR.
+
+.IP \fBmod_nw_dst\fB:\fIip\fR
+Sets the IPv4 destination address to \fIip\fR.
+
+.IP \fBmod_tp_src\fB:\fIport\fR
+Sets the TCP or UDP source port to \fIport\fR.
+
+.IP \fBmod_tp_dst\fB:\fIport\fR
+Sets the TCP or UDP destination port to \fIport\fR.
 .RE
 
 .IP
@@ -439,28 +430,7 @@ described in \fBFlow Syntax\fR, above.
 \fB--strict\fR
 Uses strict matching when running flow modification commands.
 
-.TP
-\fB-t\fR, \fB--timeout=\fIsecs\fR
-Limits \fBovs\-ofctl\fR runtime to approximately \fIsecs\fR seconds.  If
-the timeout expires, \fBovs\-ofctl\fR will exit with a \fBSIGALRM\fR
-signal.
-
-.TP
-\fB-p\fR, \fB--private-key=\fIprivkey.pem\fR
-Specifies a PEM file containing the private key used as the
-identity for SSL connections to a switch.
-
-.TP
-\fB-c\fR, \fB--certificate=\fIcert.pem\fR
-Specifies a PEM file containing a certificate, signed by the
-controller's certificate authority (CA), that certifies the
-private key to identify a trustworthy controller.
-
-.TP
-\fB-C\fR, \fB--ca-cert=\fIcacert.pem\fR
-Specifies a PEM file containing the CA certificate used to verify that
-a switch is trustworthy.
-
+.so lib/ssl.man
 .so lib/vlog.man
 .so lib/common.man