X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=utilities%2Fovs-vsctl.8.in;h=7476777a813131a64eca9ce89a2f0d6991102f1b;hb=d295e8e97acae13552a5b220d3fbcff8201064a2;hp=3137a847e42ee1a370caf15d66bf5fc15709cc9d;hpb=e111e681e36810ac4c5a87c1428ac243ded0ab23;p=sliver-openvswitch.git

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index 3137a847e..7476777a8 100644
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -11,7 +11,10 @@
 .  RE
 ..
 .TH ovs\-vsctl 8 "November 2009" "Open vSwitch" "Open vSwitch Manual"
+.\" This program's name:
 .ds PN ovs\-vsctl
+.\" SSL peer program's name:
+.ds SN ovsdb\-server
 .
 .SH NAME
 ovs\-vsctl \- utility for querying and configuring \fBovs\-vswitchd\fR
@@ -123,6 +126,8 @@ not used, \fBovs\-vsctl\fR uses a timeout of five seconds.
 .
 .SS "Public Key Infrastructure Options"
 .so lib/ssl.man
+.so lib/ssl-bootstrap.man
+.so lib/ssl-peer-ca-cert.man
 .so lib/vlog.man
 .
 .SH COMMANDS
@@ -310,22 +315,15 @@ output.
 locally, or it can be configured to connect a given bridge to one or
 more external OpenFlow controllers, such as NOX.
 .
-For each of these commands, a \fIbridge\fR of \fBdefault\fR applies
-the configuration as the default for any bridge that has not been
-explicitly configured.  Otherwise, \fIbridge\fR must name a bridge,
-and the settings apply only to that bridge.  (Omitting \fIbridge\fR
-entirely usually has the same effect as specifying \fBdefault\fR.)
-.
-.IP "\fBget\-controller\fR [\fIbridge\fR]"
+.IP "\fBget\-controller\fR \fIbridge\fR"
 Prints the configured controller target.
 .
-.IP "\fBdel\-controller\fR [\fIbridge\fR]"
+.IP "\fBdel\-controller\fR \fIbridge\fR"
 Deletes the configured controller target.
 .
-.IP "\fBset\-controller\fR [\fIbridge\fR] \fItarget\fR\&..."
-Sets the configured controller target or targets.  If more than one
-\fItarget\fR is specified, then \fIbridge\fR may not be omitted.  Each
-\fItarget\fR may use any of the following forms:
+.IP "\fBset\-controller\fR \fIbridge\fR \fItarget\fR\&..."
+Sets the configured controller target or targets.  Each \fItarget\fR may
+use any of the following forms:
 .
 .RS
 .so lib/vconn-active.man
@@ -352,13 +350,13 @@ it discontinues its standalone behavior.
 If this option is set to \fBsecure\fR, \fBovs\-vswitchd\fR will not
 set up flows on its own when the controller connection fails.
 .
-.IP "\fBget\-fail\-mode\fR [\fIbridge\fR]"
+.IP "\fBget\-fail\-mode\fR \fIbridge\fR"
 Prints the configured failure mode.
 .
-.IP "\fBdel\-fail\-mode\fR [\fIbridge\fR]"
+.IP "\fBdel\-fail\-mode\fR \fIbridge\fR"
 Deletes the configured failure mode.
 .
-.IP "\fBset\-fail\-mode\fR [\fIbridge\fR] \fBstandalone\fR|\fBsecure\fR"
+.IP "\fBset\-fail\-mode\fR \fIbridge\fR \fBstandalone\fR|\fBsecure\fR"
 Sets the configured failure mode.
 .
 .SS "SSL Configuration"
@@ -413,7 +411,7 @@ for bootstrapping.
 This option is only useful if the controller sends its CA certificate
 as part of the SSL certificate chain.  The SSL protocol does not
 require the controller to send the CA certificate, but
-\fBcontroller\fR(8) can be configured to do so with the
+\fBovs\-controller\fR(8) can be configured to do so with the
 \fB\-\-peer\-ca\-cert\fR option.
 .
 .SS "Database Commands"
@@ -450,9 +448,7 @@ A port mirroring configuration attached to a bridge.  Records may be
 identified by mirror name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
-particular bridge may be identified by the bridge's name.  The default
-controller controller for an Open vSwitch may be identified by
-specifying \fB.\fR as the record name.
+particular bridge may be identified by the bridge's name.
 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.