X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=utilities%2Fovs-vsctl.8.in;h=9ec8d33eeb3a2d7a19f1f782ac0fcfe05839a098;hb=3b4d8ad3070ad30da9cf52d4f2abf792bc07f20d;hp=a4a67662925f9d7057bc17b47bd19d536320d29f;hpb=2a9537e2ab6c36c16e306974df5e1e5658cc7258;p=sliver-openvswitch.git

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index a4a676629..9ec8d33ee 100644
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -69,7 +69,8 @@ When such a ``fake bridge'' is active, \fBovs\-vsctl\fR will treat it
 much like a bridge separate from its ``parent bridge,'' but the actual
 implementation in Open vSwitch uses only a single bridge, with ports on
 the fake bridge assigned the implicit VLAN of the fake bridge of which
-they are members.
+they are members.  (A fake bridge for VLAN 0 receives packets that
+have no 802.1Q tag or a tag with VLAN 0.)
 .
 .SH OPTIONS
 .
@@ -179,7 +180,7 @@ nothing if \fIbridge\fR already exists as a real bridge.
 Creates a ``fake bridge'' named \fIbridge\fR within the existing Open
 vSwitch bridge \fIparent\fR, which must already exist and must not
 itself be a fake bridge.  The new fake bridge will be on 802.1Q VLAN
-\fIvlan\fR, which must be an integer between 1 and 4095.  Initially
+\fIvlan\fR, which must be an integer between 0 and 4095.  Initially
 \fIbridge\fR will have no ports (other than \fIbridge\fR itself).
 .IP
 Without \fB\-\-may\-exist\fR, attempting to create a bridge that
@@ -486,6 +487,9 @@ A bridge port.  Records may be identified by port name.
 .IP "\fBInterface\fR"
 A network device attached to a port.  Records may be identified by
 name.
+.IP "\fBFlow_Table\fR"
+Configuration for a particular OpenFlow flow table.  Records may be
+identified by name.
 .IP "\fBQoS\fR"
 Quality-of-service configuration for a \fBPort\fR.  Records may be
 identified by port name.
@@ -558,8 +562,10 @@ follow the syntax for the column's key type and value type,
 respectively.  When multiple pairs are present (separated by spaces or
 a comma), duplicate keys are not allowed, and again the order is not
 important.  Duplicate values are allowed.  An empty map is represented
-as \fB{}\fR, and curly braces may be optionally enclose non-empty maps
-as well.
+as \fB{}\fR.  Curly braces may optionally enclose non-empty maps as
+well (but use quotes to prevent the shell from expanding
+\fBother-config={0=x,1=y}\fR into \fBother-config=0=x
+other-config=1=y\fR, which may not have the desired effect).
 .
 .ST "Database Command Syntax"
 .IP "[\fB\-\-columns=\fIcolumn\fR[\fB,\fIcolumn\fR]...] \fBlist \fItable \fR[\fIrecord\fR]..."
@@ -710,6 +716,8 @@ this.
 .IP "\fR[\fB\-\-if\-exists\fR] \fBdestroy \fItable record\fR..."
 Deletes each specified \fIrecord\fR from \fItable\fR.  Unless
 \fB\-\-if\-exists\fR is specified, each \fIrecord\fRs must exist.
+.IP "\fB\-\-all destroy \fItable\fR"
+Deletes all records from the \fItable\fR.
 .IP
 The \fBdestroy\fR command is only useful for records in the \fBQoS\fR
 or \fBQueue\fR tables.  Records in other tables are automatically
@@ -783,6 +791,12 @@ access port for VLAN 10, and configure it with an IP address:
 .IP
 .B "ifconfig vlan10 192.168.0.123"
 .
+.PP
+Add a GRE tunnel port \fBgre0\fR to remote IP address 1.2.3.4 to
+bridge \fBbr0\fR:
+.IP
+.B "ovs\-vsctl add\-port br0 gre0 \-\- set Interface gre0 type=gre options:remote_ip=1.2.3.4"
+.
 .SS "Port Mirroring"
 .PP
 Mirror all packets received or sent on \fBeth0\fR or \fBeth1\fR onto
@@ -832,7 +846,8 @@ unreferenced QoS records are not automatically destroyed):
 (This command will leave two unreferenced Queue records in the
 database.  To delete them, use "\fBovs\-vsctl list Queue\fR" to find
 their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
-\fIuuid2\fR" to destroy each of them.)
+\fIuuid2\fR" to destroy each of them or use
+"\fBovs\-vsctl -- --all destroy Queue\fR" to delete all records.)
 .SS "Connectivity Monitoring"
 .PP
 Monitor connectivity to a remote maintenance point on eth0.