X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=vbuild-nightly.sh;h=3b7a186b894651805849da91dae02bb069e1af39;hb=72ea08be6de0f74220e577226e041519094edd0a;hp=d1aecfd25cf2168d659b05bbd8f36fca8202b70b;hpb=c59c08d5d668c26a75916f77b6a29e60254dd73c;p=build.git

diff --git a/vbuild-nightly.sh b/vbuild-nightly.sh
index d1aecfd2..3b7a186b 100755
--- a/vbuild-nightly.sh
+++ b/vbuild-nightly.sh
@@ -5,47 +5,121 @@ COMMANDPATH=$0
 COMMAND=$(basename $0)
 
 # default values, tunable with command-line options
-DEFAULT_FCDISTRO=fc6
+DEFAULT_FCDISTRO=f8
 DEFAULT_PLDISTRO=planetlab
-DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@"
+DEFAULT_PERSONALITY=linux32
+DEFAULT_BASE="@DATE@--@PLDISTRO@-@FCDISTRO@-@PERSONALITY@"
 DEFAULT_SVNPATH="http://svn.planet-lab.org/svn/build/trunk"
-
-DEFAULT_MAILTO_onelab="onelab-build@one-lab.org"
-# tmp - send all mails to onelab
-#DEFAULT_MAILTO_planetlab="devel@planet-lab.org"
-DEFAULT_MAILTO_planetlab=$DEFAULT_MAILTO_onelab
+DEFAULT_TESTSVNPATH="http://svn.planet-lab.org/svn/tests/trunk/system/"
+DEFAULT_TESTCONFIG="default"
+DEFAULT_IFNAME=eth0
 
 # web publishing results
 DEFAULT_WEBPATH="/build/@PLDISTRO@/"
 
 # for the test part
 TESTBUILDURL="http://build.one-lab.org/"
-TESTBOX=onelab-test.inria.fr
-TESTBOXSSH=root@onelab-test.inria.fr
-TESTSVNPATH="http://svn.one-lab.org/new_plc_api/trunk/plctest"
-TESTSCRIPT=TestMain.py
+TESTBOXSSH=root@testbox.one-lab.org
 ####################
 # assuming vserver runs in UTC
-DATE=$(date -u +'%Y.%m.%d')
+DATE=$(date +'%Y.%m.%d')
+
+# temporary - wrap a quick summary of suspicious stuff
+# this is to focus on installation that go wrong
+# use with care, a *lot* of other things can go bad as well
+function summary () {
+    from=$1; shift
+    echo "******************** BEG SUMMARY" 
+    python - $from <<EOF
+#!/usr/bin/env python
+# read a full log and tries to extract the interesting stuff
+
+import sys,re
+m_show_line=re.compile(".* BEG (RPM|VSERVER).*|.*'boot'.*|\* .*|.*is not installed.*")
+m_installing_any=re.compile('\r  (Installing:[^\]]*]) ')
+m_installing_err=re.compile('\r  (Installing:[^\]]*])(..+)')
+m_installing_end=re.compile('Installed:.*')
+m_installing_doc1=re.compile("(.*)install-info: No such file or directory for /usr/share/info/\S+(.*)")
+m_installing_doc2=re.compile("(.*)grep: /usr/share/info/dir: No such file or directory(.*)")
+
+def summary (filename):
+
+    try:
+        if filename=="-":
+            filename="stdin"
+            f=sys.stdin
+        else:
+            f=open(filename)
+        echo=False
+        for line in f.xreadlines():
+            # first off : discard warnings related to doc
+            if m_installing_doc1.match(line):
+                (begin,end)=m_installing_doc1.match(line).groups()
+                line=begin+end
+            if m_installing_doc2.match(line):
+                (begin,end)=m_installing_doc2.match(line).groups()
+                line=begin+end
+            # unconditionnally show these lines
+            if m_show_line.match(line):
+                print '>>>',line,
+            # an 'installing' line with messages afterwards : needs to be echoed
+            elif m_installing_err.match(line):
+                (installing,error)=m_installing_err.match(line).groups()
+                print '>>>',installing
+                print '>>>',error
+                echo=True
+            # closing an 'installing' section
+            elif m_installing_end.match(line):
+                echo=False
+            # any 'installing' line
+            elif m_installing_any.match(line):
+                if echo: 
+                    installing=m_installing_any.match(line).group(1)
+                    print '>>>',installing
+                echo=False
+            # print lines when echo is true
+            else:
+                if echo: print '>>>',line,
+        f.close()
+    except:
+        print 'Failed to analyze',filename
+
+for arg in sys.argv[1:]:
+    summary(arg)
+EOF
+    echo "******************** END SUMMARY" 
+}
+
 
 # Notify recipient of failure or success, manage various stamps 
 function failure() {
     set -x
+    WEBLOG=${WEBPATH}/${BASE}.log.txt
+    mkdir -p ${WEBPATH}
+    cp $LOG ${WEBLOG}
+    summary $LOG >> ${WEBLOG}
+    (echo -n "============================== $COMMAND: failure at " ; date ; tail -c 30k $WEBLOG) > ${WEBLOG}.ko
     if [ -n "$MAILTO" ] ; then
-	tail -c 8k $LOG | mail -s "Failures for build ${BASE}" $MAILTO
+	tail -c 30k ${WEBLOG} | mail -s "Failures for build ${BASE}" $MAILTO
     fi
-    cp $LOG ${WEBPATH}/${BASE}.log.txt
-    (echo -n "============================== $COMMAND: failure at" ; date ; tail -c 20k $LOG) > ${WEBPATH}/${BASE}.bko.txt
     exit 1
 }
 
 function success () {
     set -x
+    WEBLOG=${WEBPATH}/${BASE}.log.txt
+    mkdir -p ${WEBPATH}
+    cp $LOG ${WEBLOG}
+    summary $LOG >> ${WEBLOG}
+    if [ -n "$DO_TEST" ] ; then
+	echo "Successfully built and tested - see testlogs for details" > ${WEBLOG}.pass
+	rm -f ${WEBLOG}.ok
+    else
+	echo "Successfully built"> ${WEBLOG}.ok
+    fi
     if [ -n "$MAILTO" ] ; then
-	(echo "http://build.one-lab.org/$PLDISTRO/$BASE" ; echo "Completed on $(date)" ) | mail -s "Successfull build for ${BASE}" $MAILTO
+	(echo "$PLDISTRO ($BASE) build for $FCDISTRO completed on $(date)" ) | mail -s "Successful build for ${BASE}" $MAILTO
     fi
-    cp $LOG ${WEBPATH}/${BASE}.log.txt
-    touch ${WEBPATH}/${BASE}.bok.txt
     exit 0
 }
 
@@ -57,24 +131,28 @@ function build () {
     echo -n "============================== Starting $COMMAND:build on "
     date
 
-    cd /
-
+    cd /build
   # if TAGSRELEASE specified : update PLDISTROTAGS with this tag
     if [ -n "$TAGSRELEASE" ] ; then
-	cd build
 	svn up -r $TAGSRELEASE $PLDISTROTAGS
-	cd - 
     fi
 
     show_env
     
     echo "Running make IN $(pwd)"
-    make stage1=true "${MAKEOPTS[@]}" PLDISTROTAGS=${PLDISTROTAGS} PLDISTRO=${PLDISTRO} "${MAKEVARS[@]}" -C /build
-    # in case we use an older build that does not know about versions
-    set +e
-    make "${MAKEOPTS[@]}" PLDISTROTAGS=${PLDISTROTAGS} PLDISTRO=${PLDISTRO} "${MAKEVARS[@]}" -C /build versions
-    set -e
-    make "${MAKEOPTS[@]}" PLDISTROTAGS=${PLDISTROTAGS} PLDISTRO=${PLDISTRO} "${MAKEVARS[@]}" -C /build $MAKETARGETS
+    
+    # stuff our own variable settings
+    MAKEVARS=("PLDISTRO=${PLDISTRO}" "${MAKEVARS[@]}")
+    MAKEVARS=("PLDISTROTAGS=${PLDISTROTAGS}" "${MAKEVARS[@]}")
+    MAKEVARS=("NIGHTLY_BASE=${BASE}" "${MAKEVARS[@]}")
+    MAKEVARS=("NIGHTLY_PERSONALITY=${PERSONALITY}" "${MAKEVARS[@]}")
+
+    # stage1
+    make -C /build $DRY_RUN "${MAKEVARS[@]}" stage1=true 
+    # versions
+    make -C /build $DRY_RUN "${MAKEVARS[@]}" versions
+    # actual stuff
+    make -C /build $DRY_RUN "${MAKEVARS[@]}" $MAKETARGETS
 
 }
 
@@ -86,42 +164,43 @@ function runtest () {
     trap failure ERR INT
 
     echo -n "============================== Starting $COMMAND:runtest on $(date)"
-    here=$(pwd)
 
     ### the URL to the myplc package
-    cd /vservers/$BASE/build/RPMS/i386
-    rpm=$(ls myplc-[0-9]*.rpm)
+    rpm=$( find /vservers/$BASE/build/RPMS -name 'myplc-[0-9]*' )
     if [ ${#rpm[@]} != 1 ] ; then
 	echo "$COMMAND: Cannot locate rpm for testing"
 	failure
 	exit 1
     fi
-    url=${TESTBUILDURL}${PLDISTRO}/${BASE}/RPMS/i386/${rpm}
-
-    # find the place where the plctest material was checked out
-    cd /vservers/$BASE/build/CODEBASES/PLCAPI
-    if [ ! -d plctest/ ] ; then
-	echo "$COMMAND : Cannot not locate plctest/ - exiting"
-	failure
-	exit 1
-    fi
-  # compute test directory name on test box
-    testdir=plctest-${BASE}
-  # rsync/push test material onto the test box
-    ssh ${TESTBOXSSH} mkdir -p ${testdir}
-    rsync -a -v plctest/ ${TESTBOXSSH}:${testdir}
-  # invoke test on testbox
-    ssh ${TESTBOXSSH} python -u ${testdir}/${TESTSCRIPT} ${url} 
-  #invoke make install from build to the testbox
-  # looks suspicious : we'd need this *during* myplc run, not at the end
-  # in addition we are not in the vserver here so running make can have weird effects
-  # make install PLCHOST=${TESTBOX}
-	
-    if [ "$?" != 0 ] ; then
+    url=$(echo $rpm | sed -e "s,/vservers/$BASE/build,${TESTBUILDURL}${PLDISTRO}/${BASE},")
+
+    # test directory name on test box
+    testdir=${BASE}
+    # clean it
+    ssh ${TESTBOXSSH} rm -rf ${testdir}
+    # check it out
+    ssh ${TESTBOXSSH} svn co ${TESTSVNPATH} ${testdir}
+    # invoke test on testbox - pass url and build url - so the tests can use vtest-init-vserver.sh
+    configs=""
+    for config in ${TESTCONFIG} ; do
+	configs="$configs --config $config"
+    done
+    
+    # need to proceed despite of set -e
+    success=true
+    ssh 2>&1 ${TESTBOXSSH} ${testdir}/runtest --build ${SVNPATH} --url ${url} $configs --all || success=
+
+    # gather logs in the vserver
+    mkdir -p /vservers/$BASE/build/testlogs
+    ssh 2>&1 ${TESTBOXSSH} tar -C ${testdir}/logs -cf - . | tar -C /vservers/$BASE/build/testlogs -xf - || true
+    # push them to the build web
+    rsync --archive --delete /vservers/$BASE/build/testlogs/ $WEBPATH/$BASE/testlogs/
+    chmod -R a+r $WEBPATH/$BASE/testlogs/
+
+    if [ -z "$success" ] ; then
 	failure
     fi
     
-    cd $here
     echo -n "============================== End $COMMAND:runtest on $(date)"
 }
 
@@ -132,7 +211,7 @@ function show_env () {
     echo BASE=$BASE
     echo SVNPATH=$SVNPATH
     echo MAKEVARS="${MAKEVARS[@]}"
-    echo MAKEOPTS="${MAKEOPTS[@]}"
+    echo DRY_RUN="$DRY_RUN"
     echo PLDISTROTAGS="$PLDISTROTAGS"
     echo TAGSRELEASE="$TAGSRELEASE"
     echo -n "(might be unexpanded)"
@@ -151,21 +230,26 @@ function usage () {
     echo "Usage: $COMMAND [option] make-targets"
     echo "This is $REVISION"
     echo "Supported options"
-    echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
-    echo " -f FCDISTRO - defaults to $DEFAULT_FCDISTRO"
-    echo " -d PLDISTRO - defaults to $DEFAULT_PLDISTRO"
-    echo " -b BASE - defaults to $DEFAULT_BASE"
+    echo " -f fcdistro - defaults to $DEFAULT_FCDISTRO"
+    echo " -d pldistro - defaults to $DEFAULT_PLDISTRO"
+    echo " -p personality - defaults to $DEFAULT_PERSONALITY"
+    echo " -b base - defaults to $DEFAULT_BASE"
     echo "    @NAME@ replaced as appropriate"
-    echo " -t PLDISTROTAGS - defaults to \${PLDISTRO}-tags.mk"
-    echo " -r TAGSRELEASE - a release number that refers to PLDISTROTAGS - defaults to HEAD"
-    echo " -s SVNPATH - where to fetch the build module"
-    echo " -o : overwrite - re-run in base directory, do not create vserver"
-    echo " -m MAILTO"
-    echo " -a MAKEVAR=value - space in values are not supported"
-    echo " -w WEBPATH - defaults to $DEFAULT_WEBPATH"
+    echo " -t pldistrotags - defaults to \${PLDISTRO}-tags.mk"
+    echo " -r tagsrelease - a release number that refers to PLDISTROTAGS - defaults to HEAD"
+    echo " -s svnpath - where to fetch the build module"
+    echo " -x testsvnpath - defaults to $DEFAULT_TESTSVNPATH"
+    echo " -c testconfig - defaults to $DEFAULT_TESTCONFIG"
+    echo " -w webpath - defaults to $DEFAULT_WEBPATH"
+    echo " -m mailto - no default"
+    echo " -O : overwrite - re-run in base directory, do not re-create vserver"
     echo " -B : run build only"
     echo " -T : run test only"
+    echo " -n dry-run : -n passed to make - vserver gets created though - no mail sent"
     echo " -v : be verbose"
+    echo " -7 : uses weekday-@FCDISTRO@ as base"
+    echo " -a makevar=value - space in values are not supported"
+    echo " -i ifname - defaults to $DEFAULT_IFNAME - used to determine local IP"
     exit 1
 }
 
@@ -173,55 +257,59 @@ function main () {
 
     set -e
 
-    # preserve arguments for passing them again later
-    declare -a argv
-    for arg in "$@"; do argv=(${argv[@]} "$arg") ; done
-    
     # parse arguments
     MAKEVARS=()
-    MAKEOPTS=()
+    DRY_RUN=
     DO_BUILD=true
     DO_TEST=true
-    while getopts "nf:d:b:t:r:s:om:a:w:BTvh" opt ; do
+    while getopts "f:d:p:b:t:r:s:x:c:w:m:OBTnv7a:i:" opt ; do
 	case $opt in
-	    n) DRY_RUN="true" ; MAKEOPTS=(${MAKEOPTS[@]} -n) ;;
 	    f) FCDISTRO=$OPTARG ;;
 	    d) PLDISTRO=$OPTARG ;;
+	    p) PERSONALITY=$OPTARG ;;
 	    b) BASE=$OPTARG ;;
 	    t) PLDISTROTAGS=$OPTARG ;;
 	    r) TAGSRELEASE=$OPTARG ;;
 	    s) SVNPATH=$OPTARG ;;
-	    o) USEOLD=true ;;
-	    m) MAILTO=$OPTARG ;;
-	    a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
+	    x) TESTSVNPATH=$OPTARG ;;
+	    c) TESTCONFIG="$TESTCONFIG $OPTARG" ;;
 	    w) WEBPATH=$OPTARG ;;
+	    m) MAILTO=$OPTARG ;;
+	    O) OVERWRITEMODE=true ;;
 	    B) DO_TEST= ;;
-	    T) DO_BUILD= ; USEOLD=true ;;
+	    T) DO_BUILD= ; OVERWRITEMODE=true ;;
+	    n) DRY_RUN="-n" ;;
 	    v) set -x ;;
+	    7) BASE="$(date +%a|tr A-Z a-z)-@FCDISTRO@" ;;
+	    a) MAKEVARS=(${MAKEVARS[@]} "$OPTARG") ;;
+	    i) IFNAME=$OPTARG ;;
 	    h|*) usage ;;
 	esac
     done
 	
-    shift $(($OPTIND - 1))
+    # preserve options for passing them again later, together with expanded base
+    declare -a options
+    toshift=$(($OPTIND - 1))
+    arg=1; while [ $arg -le $toshift ] ; do options=(${options[@]} "$1") ; shift; arg=$(($arg+1)) ; done
+
     MAKETARGETS="$@"
     
     # set defaults
     [ -z "$FCDISTRO" ] && FCDISTRO=$DEFAULT_FCDISTRO
     [ -z "$PLDISTRO" ] && PLDISTRO=$DEFAULT_PLDISTRO
+    [ -z "$PERSONALITY" ] && PERSONALITY=$DEFAULT_PERSONALITY
     [ -z "$PLDISTROTAGS" ] && PLDISTROTAGS="${PLDISTRO}-tags.mk"
     [ -z "$BASE" ] && BASE="$DEFAULT_BASE"
     [ -z "$WEBPATH" ] && WEBPATH="$DEFAULT_WEBPATH"
+    [ -z "$IFNAME" ] && IFNAME="$DEFAULT_IFNAME"
     [ -z "$SVNPATH" ] && SVNPATH="$DEFAULT_SVNPATH"
-    # 
-    if [ "$PLDISTRO" = "onelab" ] ; then
-	[ -z "$MAILTO" ] && MAILTO="$DEFAULT_MAILTO_onelab"
-    else
-	[ -z "$MAILTO" ] && MAILTO="$DEFAULT_MAILTO_planetlab"
-    fi
+    [ -z "$TESTSVNPATH" ] && TESTSVNPATH="$DEFAULT_TESTSVNPATH"
+    [ -z "$TESTCONFIG" ] && TESTCONFIG="$DEFAULT_TESTCONFIG"
+
     [ -n "$DRY_RUN" ] && MAILTO=""
 	
     ### set BASE from DISTRO, if unspecified
-    sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g"
+    sedargs="-e s,@DATE@,${DATE},g -e s,@FCDISTRO@,${FCDISTRO},g -e s,@PLDISTRO@,${PLDISTRO},g -e s,@PERSONALITY@,${PERSONALITY},g"
     BASE=$(echo ${BASE} | sed $sedargs)
     WEBPATH=$(echo ${WEBPATH} | sed $sedargs)
 
@@ -238,7 +326,7 @@ function main () {
         # (*) copy this command in the vserver
         # (*) invoke it
 	
-	if [ -n "$USEOLD" ] ; then
+	if [ -n "$OVERWRITEMODE" ] ; then
             ### Re-use a vserver (finish an unfinished build..)
 	    if [ ! -d /vservers/${BASE} ] ; then
 		echo $COMMAND : cannot find vserver $BASE
@@ -275,29 +363,25 @@ function main () {
 	    echo "XXXXXXXXXX $COMMAND: creating vserver $BASE" $(date)
 	    show_env
 
-	    ### extract vbuild-init-vserver.sh and run it
-	    svn cat $SVNPATH/vbuild-init-vserver.sh > /tmp/vbuild-init-vserver-$$.sh
-	    # get .lst 
-	    lst=${PLDISTRO}-devel.lst
-	    svn cat $SVNPATH/$lst > /tmp/$lst 
-
+	    ### extract the whole build - much simpler
+	    tmpdir=/tmp/$COMMAND-$$
+	    svn export $SVNPATH $tmpdir
             # Create vserver
-	    cd /tmp
-	    chmod +x vbuild-init-vserver-$$.sh
-	    /tmp/vbuild-init-vserver-$$.sh ${BASE} ${FCDISTRO} ${PLDISTRO}
+	    cd $tmpdir
+	    ./vbuild-init-vserver.sh -f ${FCDISTRO} -d ${PLDISTRO} -p ${PERSONALITY} -i ${IFNAME} ${BASE} 
 	    # cleanup
-	    rm -f /tmp/vbuild-init-vserver-$$.sh /tmp/$lst
 	    cd -
-	    # Extract build
-	    vserver ${BASE} exec svn export ${SVNPATH} /build
+	    rm -rf $tmpdir
+	    # Extract build again - in the vserver
+	    vserver ${BASE} exec svn checkout ${SVNPATH} /build
 	fi
 	echo "XXXXXXXXXX $COMMAND: preparation of vserver $BASE done" $(date)
 
 	# The log inside the vserver contains everything
 	LOG2=/vservers/${BASE}/log.txt
-	(echo "==================== Transcript of vserver creation -- BEG $(date)" ; \
+	(echo "==================== BEG VSERVER Transcript of vserver creation" ; \
 	 cat $LOG ; \
-	 echo "==================== Transcript of vserver creation -- END $(date)" ; \
+	 echo "==================== END VSERVER Transcript of vserver creation" ; \
 	 echo "xxxxxxxxxx Messing with logs, symlinking $LOG2 to $LOG" ) >> $LOG2
 	### not too nice : nuke the former log, symlink it to the new one
 	rm $LOG; ln -s $LOG2 $LOG
@@ -310,7 +394,8 @@ function main () {
 	    cp $COMMANDPATH /vservers/${BASE}/build/
 
 	    # invoke this command in the vserver for building (-T)
-	    vserver ${BASE} exec /build/$COMMAND "${argv[@]}" -b "${BASE}"
+	    vserver ${BASE} exec chmod +x /build/$COMMAND
+	    vserver ${BASE} exec /build/$COMMAND "${options[@]}" -b "${BASE}" $MAKETARGETS
 	fi
 
 	# publish to the web so runtest can find them