X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=vswitchd%2Fovs-vswitchd.conf.5.in;h=b9bf9688b8ca1dd48491d3b81d9c14750a98a762;hb=8cd4882fd5c3080816a070ad582ef06842f7c482;hp=d82a08afd3b6154aeb722ac096a8d44e28349613;hpb=de2047c5124f4301931587cb4af79ebe4f5d2f02;p=sliver-openvswitch.git diff --git a/vswitchd/ovs-vswitchd.conf.5.in b/vswitchd/ovs-vswitchd.conf.5.in index d82a08afd..b9bf9688b 100644 --- a/vswitchd/ovs-vswitchd.conf.5.in +++ b/vswitchd/ovs-vswitchd.conf.5.in @@ -396,7 +396,7 @@ switch will perform all configured bridging and switching locally. .TP \fBdiscover\fR Use controller discovery to find the local OpenFlow controller. -Refer to \fBsecchan\fR(8) for information on how to configure a DHCP +Refer to \fB\ovs\-openflowd\fR(8) for information on how to configure a DHCP server to support controller discovery. The following additional options control the discovery process: . @@ -454,7 +454,7 @@ not in use, the following additional settings are honored: By default, or if this is set to \fBtrue\fR, \fBovs\-vswitchd\fR connects to the controller in-band. If this is set to \fBfalse\fR, \fBovs\-vswitchd\fR connects to the controller out-of-band. Refer to -\fBsecchan\fR(8) for a description of in-band and out-of-band control. +\fBovs\-openflowd\fR(8) for a description of in-band and out-of-band control. .IP "\fBbridge.\fIname\fB.controller.ip=\fIip\fR" If specified, the IP address to configure on the bridge's local port. .IP "\fBbridge.\fIname\fB.controller.netmask=\fInetmask\fR" @@ -476,7 +476,7 @@ When the switch is connected to the controller, it waits for a message to be received from the controller for \fIsecs\fR seconds before it sends a inactivity probe to the controller. After sending the inactivity probe, if no response is received for an additional -\fIsecs\fR seconds, the secure channel assumes that the connection has +\fIsecs\fR seconds, \fBovs-vswitchd\fR assumes that the connection has been broken and attempts to reconnect. .IP Changing the inactivity probe interval also changes the interval