X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=vswitchd%2Fvswitch.xml;h=7739793cfb13709a1272296c5a39d4dd6669e115;hb=c473936b9af693ad88907e739013f34d9c70860d;hp=0f455000bba955f23f6bfe7757839eb7fae0d181;hpb=632e2b95c94099b78a1a3550b865898704bc8b97;p=sliver-openvswitch.git diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml index 0f455000b..7739793cf 100644 --- a/vswitchd/vswitch.xml +++ b/vswitchd/vswitch.xml @@ -9,9 +9,44 @@ table="Open_vSwitch"/> table. Records that are not reachable from the table are automatically deleted from the database, except for records in a few distinguished - ``root set'' tables noted below. + ``root set'' tables.

+

Common Columns

+ +

+ Most tables contain two special columns, named other_config + and external_ids. These columns have the same form and + purpose each place that they appear, so we describe them here to save space + later. +

+ +
+
other_config: map of string-string pairs
+
+

+ Key-value pairs for configuring rarely used features. Supported keys, + along with the forms taken by their values, are documented individually + for each table. +

+

+ A few tables do not have other_config columns because no + key-value pairs have yet been defined for them. +

+
+ +
external_ids: map of string-string pairs
+
+ Key-value pairs for use by external frameworks that integrate with Open + vSwitch, rather than by Open vSwitch itself. System integrators should + either use the Open vSwitch development mailing list to coordinate on + common key-value definitions, or choose key names that are likely to be + unique. In some cases, where key-value pairs have been defined that are + likely to be widely useful, they are documented individually for each + table. +
+
+ Configuration for an Open vSwitch daemon. There must be exactly one record in the table. @@ -25,23 +60,16 @@ SSL used globally by the daemon. - - Key-value pairs for use by external frameworks that integrate - with Open vSwitch, rather than by Open vSwitch itself. System - integrators should either use the Open vSwitch development - mailing list to coordinate on common key-value definitions, or - choose key names that are likely to be unique. The currently - defined common key-value pairs are: -
-
system-id
-
A unique identifier for the Open vSwitch's physical host. - The form of the identifier depends on the type of the host. - On a Citrix XenServer, this will likely be the same as - xs-system-uuid.
-
xs-system-uuid
-
The Citrix XenServer universally unique identifier for the - physical host as displayed by xe host-list.
-
+ + A unique identifier for the Open vSwitch's physical host. + The form of the identifier depends on the type of the host. + On a Citrix XenServer, this will likely be the same as + . + + + + The Citrix XenServer universally unique identifier for the physical + host as displayed by xe host-list. @@ -59,145 +87,139 @@ configuration changes. - - Describes functionality supported by the hardware and software platform - on which this Open vSwitch is based. Clients should not modify this - column. See the description for defined - capability categories and the meaning of associated - records. - - - +

- Key-value pairs that report statistics about a system running an Open - vSwitch. These are updated periodically (currently, every 5 - seconds). Key-value pairs that cannot be determined or that do not - apply to a platform are omitted. + The statistics column contains key-value pairs that + report statistics about a system running an Open vSwitch. These are + updated periodically (currently, every 5 seconds). Key-value pairs + that cannot be determined or that do not apply to a platform are + omitted.

-
-
cpu
-
-

- Number of CPU processors, threads, or cores currently online and - available to the operating system on which Open vSwitch is - running, as an integer. This may be less than the number - installed, if some are not online or if they are not available to - the operating system. -

-

- Open vSwitch userspace processes are not multithreaded, but the - Linux kernel-based datapath is. -

-
- -
load_average
-
-

- A comma-separated list of three floating-point numbers, - representing the system load average over the last 1, 5, and 15 - minutes, respectively. -

-
- -
memory
-
-

- A comma-separated list of integers, each of which represents a - quantity of memory in kilobytes that describes the operating - system on which Open vSwitch is running. In respective order, - these values are: -

- -
    -
  1. Total amount of RAM allocated to the OS.
    2. -
  2. RAM allocated to the OS that is in use.
    3. -
  3. RAM that can be flushed out to disk or otherwise discarded - if that space is needed for another purpose. This number is - necessarily less than or equal to the previous value.
    4. -
  4. Total disk space allocated for swap.
    5. -
  5. Swap space currently in use.
    6. -
- -

- On Linux, all five values can be determined and are included. On - other operating systems, only the first two values can be - determined, so the list will only have two values. -

-
- -
process_name
-
-

- One such key-value pair will exist for each running Open vSwitch - daemon process, with name replaced by the daemon's - name (e.g. process_ovs-vswitchd). The value is a - comma-separated list of integers. The integers represent the - following, with memory measured in kilobytes and durations in - milliseconds: -

- -
    -
  1. The process's virtual memory size.
    2. -
  2. The process's resident set size.
    3. -
  3. The amount of user and system CPU time consumed by the - process.
    4. -
  4. The number of times that the process has crashed and been - automatically restarted by the monitor.
    5. -
  5. The duration since the process was started.
    6. -
  6. The duration for which the process has been running.
    7. -
- -

- The interpretation of some of these values depends on whether the - process was started with the . If it - was not, then the crash count will always be 0 and the two - durations will always be the same. If - was given, then the crash count may be positive; if it is, the - latter duration is the amount of time since the most recent crash - and restart. -

+ + Statistics are disabled by default to avoid overhead in the common + case when statistics gathering is not useful. Set this value to + true to enable populating the + column or to false to explicitly disable it. + -

- There will be one key-value pair for each file in Open vSwitch's - ``run directory'' (usually /var/run/openvswitch) - whose name ends in .pid, whose contents are a - process ID, and which is locked by a running process. The - name is taken from the pidfile's name. -

+ +

+ Number of CPU processors, threads, or cores currently online and + available to the operating system on which Open vSwitch is running, + as an integer. This may be less than the number installed, if some + are not online or if they are not available to the operating + system. +

+

+ Open vSwitch userspace processes are not multithreaded, but the + Linux kernel-based datapath is. +

+ -

- Currently Open vSwitch is only able to obtain all of the above - detail on Linux systems. On other systems, the same key-value - pairs will be present but the values will always be the empty - string. -

-
+ + A comma-separated list of three floating-point numbers, + representing the system load average over the last 1, 5, and 15 + minutes, respectively. + -
file_systems
-
-

- A space-separated list of information on local, writable file - systems. Each item in the list describes one file system and - consists in turn of a comma-separated list of the following: -

+ +

+ A comma-separated list of integers, each of which represents a + quantity of memory in kilobytes that describes the operating + system on which Open vSwitch is running. In respective order, + these values are: +

+ +
    +
  1. Total amount of RAM allocated to the OS.
    2. +
  2. RAM allocated to the OS that is in use.
    3. +
  3. RAM that can be flushed out to disk or otherwise discarded + if that space is needed for another purpose. This number is + necessarily less than or equal to the previous value.
    4. +
  4. Total disk space allocated for swap.
    5. +
  5. Swap space currently in use.
    6. +
+ +

+ On Linux, all five values can be determined and are included. On + other operating systems, only the first two values can be + determined, so the list will only have two values. +

+ -
    -
  1. Mount point, e.g. / or /var/log. - Any spaces or commas in the mount point are replaced by - underscores.
    2. -
  2. Total size, in kilobytes, as an integer.
    3. -
  3. Amount of storage in use, in kilobytes, as an integer.
    4. -
+ +

+ One such key-value pair, with NAME replaced by + a process name, will exist for each running Open vSwitch + daemon process, with name replaced by the + daemon's name (e.g. process_ovs-vswitchd). The + value is a comma-separated list of integers. The integers + represent the following, with memory measured in kilobytes + and durations in milliseconds: +

+ +
    +
  1. The process's virtual memory size.
    2. +
  2. The process's resident set size.
    3. +
  3. The amount of user and system CPU time consumed by the + process.
    4. +
  4. The number of times that the process has crashed and been + automatically restarted by the monitor.
    5. +
  5. The duration since the process was started.
    6. +
  6. The duration for which the process has been running.
    7. +
+ +

+ The interpretation of some of these values depends on whether the + process was started with the . If it + was not, then the crash count will always be 0 and the two + durations will always be the same. If + was given, then the crash count may be positive; if it is, the + latter duration is the amount of time since the most recent crash + and restart. +

+ +

+ There will be one key-value pair for each file in Open vSwitch's + ``run directory'' (usually /var/run/openvswitch) + whose name ends in .pid, whose contents are a + process ID, and which is locked by a running process. The + name is taken from the pidfile's name. +

+ +

+ Currently Open vSwitch is only able to obtain all of the above + detail on Linux systems. On other systems, the same key-value + pairs will be present but the values will always be the empty + string. +

+ -

- This key-value pair is omitted if there are no local, writable - file systems or if Open vSwitch cannot obtain the needed - information. -

-
-
- + +

+ A space-separated list of information on local, writable file + systems. Each item in the list describes one file system and + consists in turn of a comma-separated list of the following: +

+ +
    +
  1. Mount point, e.g. / or /var/log. + Any spaces or commas in the mount point are replaced by + underscores.
    2. +
  2. Total size, in kilobytes, as an integer.
    3. +
  3. Amount of storage in use, in kilobytes, as an integer.
    4. +
+ +

+ This key-value pair is omitted if there are no local, writable + file systems or if Open vSwitch cannot obtain the needed + information. +

+ + @@ -279,6 +301,14 @@ for more information. + + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + + +
@@ -316,57 +346,154 @@ - VLAN IDs of VLANs on which MAC address learning should be disabled, so - that packets are flooded instead of being sent to specific ports that - are believed to contain packets' destination MACs. This should - ordinarily be used to disable MAC learning on VLANs used for mirroring - (RSPAN VLANs). It may also be useful for debugging. +

+ VLAN IDs of VLANs on which MAC address learning should be disabled, + so that packets are flooded instead of being sent to specific ports + that are believed to contain packets' destination MACs. This should + ordinarily be used to disable MAC learning on VLANs used for + mirroring (RSPAN VLANs). It may also be useful for debugging. +

+

+ SLB bonding (see the column in + the table) is incompatible with + flood_vlans. Consider using another bonding mode or + a different type of mirror instead. +

- OpenFlow controller set. If unset, then no OpenFlow controllers - will be used. +

+ OpenFlow controller set. If unset, then no OpenFlow controllers + will be used. +

+ +

+ If there are primary controllers, removing all of them clears the + flow table. If there are no primary controllers, adding one also + clears the flow table. Other changes to the set of controllers, such + as adding or removing a service controller, adding another primary + controller to supplement an existing primary controller, or removing + only one of two primary controllers, have no effect on the flow + table. +

+ + + + Configuration for OpenFlow tables. Each pair maps from an OpenFlow + table ID to configuration for that table.

When a controller is configured, it is, ordinarily, responsible - for setting up all flows on the switch. Thus, if the connection to - the controller fails, no new network connections can be set up. - If the connection to the controller stays down long enough, - no packets can pass through the switch at all. This setting - determines the switch's response to such a situation. It may be set - to one of the following: -

-
standalone
-
If no message is received from the controller for three - times the inactivity probe interval - (see ), then Open vSwitch - will take over responsibility for setting up flows. In - this mode, Open vSwitch causes the bridge to act like an - ordinary MAC-learning switch. Open vSwitch will continue - to retry connecting to the controller in the background - and, when the connection succeeds, it will discontinue its - standalone behavior.
-
secure
-
Open vSwitch will not set up flows on its own when the - controller connection fails or when no controllers are - defined. The bridge will continue to retry connecting to - any defined controllers forever.
-
+ for setting up all flows on the switch. Thus, if the connection to + the controller fails, no new network connections can be set up. + If the connection to the controller stays down long enough, + no packets can pass through the switch at all. This setting + determines the switch's response to such a situation. It may be set + to one of the following: +
+
standalone
+
If no message is received from the controller for three + times the inactivity probe interval + (see ), then Open vSwitch + will take over responsibility for setting up flows. In + this mode, Open vSwitch causes the bridge to act like an + ordinary MAC-learning switch. Open vSwitch will continue + to retry connecting to the controller in the background + and, when the connection succeeds, it will discontinue its + standalone behavior.
+
secure
+
Open vSwitch will not set up flows on its own when the + controller connection fails or when no controllers are + defined. The bridge will continue to retry connecting to + any defined controllers forever.
+

If this value is unset, the default is implementation-specific.

When more than one controller is configured, - is considered only when none of the - configured controllers can be contacted.

+ is considered only when none of the + configured controllers can be contacted.

+

+ Changing when no primary controllers are + configured clears the flow table. +

- Reports the OpenFlow datapath ID in use. Exactly 16 hex - digits. (Setting this column will have no useful effect. Set - :other-config - instead.) + Reports the OpenFlow datapath ID in use. Exactly 16 hex digits. + (Setting this column has no useful effect. Set instead.) + + + + Exactly 16 hex digits to set the OpenFlow datapath ID to a specific + value. May not be all-zero. + + + + If set to true, disable in-band control on the bridge + regardless of controller and manager settings. + + + + A queue ID as a nonnegative integer. This sets the OpenFlow queue ID + that will be used by flows set up by in-band control on this bridge. + If unset, or if the port used by an in-band control flow does not have + QoS configured, or if the port does not have a queue with the specified + ID, the default queue is used instead. + + + + + The IEEE 802.1D Spanning Tree Protocol (STP) is a network protocol + that ensures loop-free topologies. It allows redundant links to + be included in the network to provide automatic backup paths if + the active links fails. + + + Enable spanning tree on the bridge. By default, STP is disabled + on bridges. Bond, internal, and mirror ports are not supported + and will not participate in the spanning tree. + + + + The bridge's STP identifier (the lower 48 bits of the bridge-id) + in the form + xx:xx:xx:xx:xx:xx. + By default, the identifier is the MAC address of the bridge. + + + + The bridge's relative priority value for determining the root + bridge (the upper 16 bits of the bridge-id). A bridge with the + lowest bridge-id is elected the root. By default, the priority + is 0x8000. + + + + The interval between transmissions of hello messages by + designated ports, in seconds. By default the hello interval is + 2 seconds. + + + + The maximum age of the information transmitted by the bridge + when it is the root bridge, in seconds. By default, the maximum + age is 20 seconds. + + + + The delay to wait between transitioning root and designated + ports to forwarding, in seconds. By default, the + forwarding delay is 15 seconds. @@ -377,63 +504,120 @@ type netdev. - - Key-value pairs for use by external frameworks that integrate - with Open vSwitch, rather than by Open vSwitch itself. System - integrators should either use the Open vSwitch development - mailing list to coordinate on common key-value definitions, or - choose key names that are likely to be unique. The currently - defined key-value pairs are: -
-
bridge-id
-
A unique identifier of the bridge. On Citrix XenServer this - will commonly be the same as xs-network-uuids.
-
xs-network-uuids
-
Semicolon-delimited set of universally unique identifier(s) for - the network with which this bridge is associated on a Citrix - XenServer host. The network identifiers are RFC 4122 UUIDs as - displayed by, e.g., xe network-list.
-
+ + A unique identifier of the bridge. On Citrix XenServer this will + commonly be the same as + . - - Key-value pairs for configuring rarely used bridge - features. The currently defined key-value pairs are: -
-
datapath-id
-
Exactly 16 hex - digits to set the OpenFlow datapath ID to a specific - value. May not be all-zero.
-
disable-in-band
-
If set to true, disable in-band control on - the bridge regardless of controller and manager settings.
-
hwaddr
-
An Ethernet address in the form - xx:xx:xx:xx:xx:xx - to set the hardware address of the local port and influence the - datapath ID.
-
in-band-queue
-
- A queue ID as a nonnegative integer. This sets the OpenFlow queue - ID that will be used by flows set up by in-band control on this - bridge. If unset, or if the port used by an in-band control flow - does not have QoS configured, or if the port does not have a queue - with the specified ID, the default queue is used instead. -
-
+ + Semicolon-delimited set of universally unique identifier(s) for the + network with which this bridge is associated on a Citrix XenServer + host. The network identifiers are RFC 4122 UUIDs as displayed by, + e.g., xe network-list. + + + + An Ethernet address in the form + xx:xx:xx:xx:xx:xx + to set the hardware address of the local port and influence the + datapath ID. + + + +

+ A number of flows as a nonnegative integer. This sets number of + flows at which eviction from the kernel flow table will be triggered. + If there are a large number of flows then increasing this value to + around the number of flows present can result in reduced CPU usage + and packet loss. +

+

+ The default is 1000. Values below 100 will be rounded up to 100. +

+ + + + Option to allow forwarding of BPDU frames when NORMAL action is + invoked. Frames with reserved Ethernet addresses (e.g. STP + BPDU) will be forwarded when this option is enabled and the + switch is not providing that functionality. If STP is enabled + on the port, STP BPDUs will never be forwarded. If the Open + vSwitch bridge is used to connect different Ethernet networks, + and if Open vSwitch node does not run STP, then this option + should be enabled. Default is disabled, set to + true to enable. + + + +

+ The maximum number of seconds to retain a MAC learning entry for + which no packets have been seen. The default is currently 300 + seconds (5 minutes). The value, if specified, is forced into a + reasonable range, currently 15 to 3600 seconds. +

+ +

+ A short MAC aging time allows a network to more quickly detect that a + host is no longer connected to a switch port. However, it also makes + it more likely that packets will be flooded unnecessarily, when they + are addressed to a connected host that rarely transmits packets. To + reduce the incidence of unnecessary flooding, use a MAC aging time + longer than the maximum interval at which a host will ordinarily + transmit packets. +

+ + + + +

+ Status information about bridges. +

+ + Key-value pairs that report bridge status. + + +

+ The bridge-id (in hex) used in spanning tree advertisements. + Configuring the bridge-id is described in the + stp-system-id and stp-priority keys + of the other_config section earlier. +

+ + +

+ The designated root (in hex) for this spanning tree. +

+ + +

+ The path cost of reaching the designated bridge. A lower + number is better. +

+ + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + + +

A port within a .

Most commonly, a port has exactly one ``interface,'' pointed to by its - column. Such a port logically - corresponds to a port on a physical Ethernet switch. A port - with more than one interface is a ``bonded port'' (see - ).

+ column. Such a port logically + corresponds to a port on a physical Ethernet switch. A port + with more than one interface is a ``bonded port'' (see + ).

Some properties that one might think as belonging to a port are actually - part of the port's members.

+ part of the port's members.

Port name. Should be alphanumeric and no more than about 8 @@ -448,58 +632,131 @@ -

A bridge port must be configured for VLANs in one of two - mutually exclusive ways: +

Bridge ports support the following types of VLAN configuration:

+
+
trunk
+
+

+ A trunk port carries packets on one or more specified VLANs + specified in the column (often, on every + VLAN). A packet that ingresses on a trunk port is in the VLAN + specified in its 802.1Q header, or VLAN 0 if the packet has no + 802.1Q header. A packet that egresses through a trunk port will + have an 802.1Q header if it has a nonzero VLAN ID. +

+ +

+ Any packet that ingresses on a trunk port tagged with a VLAN that + the port does not trunk is dropped. +

+
+ +
access
+
+

+ An access port carries packets on exactly one VLAN specified in the + column. Packets egressing on an access port + have no 802.1Q header. +

+ +

+ Any packet with an 802.1Q header with a nonzero VLAN ID that + ingresses on an access port is dropped, regardless of whether the + VLAN ID in the header is the access port's VLAN ID. +

+
+ +
native-tagged
+
+ A native-tagged port resembles a trunk port, with the exception that + a packet without an 802.1Q header that ingresses on a native-tagged + port is in the ``native VLAN'' (specified in the + column). +
+ +
native-untagged
+
+ A native-untagged port resembles a native-tagged port, with the + exception that a packet that egresses on a native-untagged port in + the native VLAN will not have an 802.1Q header. +
+
+

+ A packet will only egress through bridge ports that carry the VLAN of + the packet, as described by the rules above. +

+ + +

+ The VLAN mode of the port, as described above. When this column is + empty, a default mode is selected as follows: +

    -
  • A ``trunk port'' has an empty value for . Its value may be - empty or non-empty.
    • -
  • An ``implicitly tagged VLAN port'' or ``access port'' - has an nonempty value for . Its - value must be empty.
    • +
  • + If contains a value, the port is an access + port. The column should be empty. +
    • +
  • + Otherwise, the port is a trunk port. The + column value is honored if it is present. +
- If and are both - nonempty, the configuration is ill-formed. -

+

- If this is an access port (see above), the port's implicitly - tagged VLAN. Must be empty if this is a trunk port. + For an access port, the port's implicitly tagged VLAN. For a + native-tagged or native-untagged port, the port's native VLAN. Must + be empty if this is a trunk port.

+ + +

- Frames arriving on trunk ports will be forwarded to this - port only if they are tagged with the given VLAN (or, if - is 0, then if they lack a VLAN header). - Frames arriving on other access ports will be forwarded to - this port only if they have the same - value. Frames forwarded to this port will not have an - 802.1Q header. + For a trunk, native-tagged, or native-untagged port, the 802.1Q VLAN + or VLANs that this port trunks; if it is empty, then the port trunks + all VLANs. Must be empty if this is an access port.

- When a frame with a 802.1Q header that indicates a nonzero - VLAN is received on an access port, it is discarded. + A native-tagged or native-untagged port always trunks its native + VLAN, regardless of whether includes that + VLAN.

- + +

+ An 802.1Q header contains two important pieces of information: a VLAN + ID and a priority. A frame with a zero VLAN ID, called a + ``priority-tagged'' frame, is supposed to be treated the same way as + a frame without an 802.1Q header at all (except for the priority). +

+ +

+ However, some network elements ignore any frame that has 802.1Q + header at all, even when the VLAN ID is zero. Therefore, by default + Open vSwitch does not output priority-tagged frames, instead omitting + the 802.1Q header entirely if the VLAN ID is zero. Set this key to + true to enable priority-tagged frames on a port. +

+

- If this is a trunk port (see above), the 802.1Q VLAN(s) that - this port trunks; if it is empty, then the port trunks all - VLANs. Must be empty if this is an access port. + Regardless of this setting, Open vSwitch omits the 802.1Q header on + output if both the VLAN ID and priority would be zero.

+

- Frames arriving on trunk ports are dropped if they are not - in one of the specified VLANs. For this purpose, packets - that have no VLAN header are treated as part of VLAN 0. + All frames output to native-tagged ports have a nonzero VLAN ID, so + this setting is not meaningful on native-tagged ports.

A port that has more than one interface is a ``bonded port.'' Bonding - allows for load balancing and fail-over. Some kinds of bonding will - work with any kind of upstream switch:

+ allows for load balancing and fail-over. Some kinds of bonding will + work with any kind of upstream switch:

balance-slb
@@ -517,8 +774,7 @@

The following modes require the upstream switch to support 802.3ad with - successful LACP negotiation. If LACP negotiation fails then - balance-slb style flow hashing is used as a fallback: + successful LACP negotiation:

@@ -528,64 +784,206 @@ information such as destination MAC address, IP address, and TCP port. -
-
stable

Attempts to always assign a given flow to the same slave - consistently. In an effort to maintain stability, no load - balancing is done. Uses a similar hashing strategy to - balance-tcp, falling back to balance-slb - style hashing when LACP negotiations are unsuccessful.

-

Slave selection decisions are made based on - bond-stable-id if set. Otherwise, OpenFlow port - number is used. Decisions are consistent across all ovs-vswitchd - instances with equivalent bond-stable-ids.

+ consistently. In an effort to maintain stability, no load + balancing is done. Uses a similar hashing strategy to + balance-tcp, always taking into account L3 and L4 + fields even if LACP negotiations are unsuccessful.

+

Slave selection decisions are made based on if set. Otherwise, + OpenFlow port number is used. Decisions are consistent across all + ovs-vswitchd instances with equivalent + + values.

These columns apply only to bonded ports. Their values are - otherwise ignored.

+ otherwise ignored.

The type of bonding used for a bonded port. Defaults to - balance-slb if unset. + active-backup if unset.

- -

For a bonded port, the number of milliseconds for which carrier must - stay up on an interface before the interface is considered to be up. - Specify 0 to enable the interface immediately.

-

This setting is honored only when at least one bonded interface is - already enabled. When no interfaces are enabled, then the first bond - interface to come up is enabled immediately.

+ + An integer hashed along with flows when choosing output slaves in load + balanced bonds. When changed, all flows will be assigned different + hash values possibly causing slave selection decisions to change. Does + not affect bonding modes which do not employ load balancing such as + active-backup. - - For a bonded port, the number of milliseconds for which carrier must - stay down on an interface before the interface is considered to be - down. Specify 0 to disable the interface immediately. - + +

+ An important part of link bonding is detecting that links are down so + that they may be disabled. These settings determine how Open vSwitch + detects link failure. +

- - For a bonded port, whether to create a fake internal interface with the - name of the port. Use only for compatibility with legacy software that - requires this. - + + The means used to detect link failures. Defaults to + carrier which uses each interface's carrier to detect + failures. When set to miimon, will check for failures + by polling each interface's MII. + + + + The interval, in milliseconds, between successive attempts to poll + each interface's MII. Relevant only when is miimon. + + + +

+ The number of milliseconds for which carrier must stay up on an + interface before the interface is considered to be up. Specify + 0 to enable the interface immediately. +

+ +

+ This setting is honored only when at least one bonded interface is + already enabled. When no interfaces are enabled, then the first + bond interface to come up is enabled immediately. +

+ + + + The number of milliseconds for which carrier must stay down on an + interface before the interface is considered to be down. Specify + 0 to disable the interface immediately. + + + + +

+ LACP, the Link Aggregation Control Protocol, is an IEEE standard that + allows switches to automatically detect that they are connected by + multiple links and aggregate across those links. These settings + control LACP behavior. +

- -

Configures LACP on this port. LACP allows directly connected + + Configures LACP on this port. LACP allows directly connected switches to negotiate which links may be bonded. LACP may be enabled on non-bonded ports for the benefit of any switches they may be connected to. active ports are allowed to initiate LACP negotiations. passive ports are allowed to participate in LACP negotiations initiated by a remote switch, but not allowed to - initiate such negotiations themselves. If unset Open vSwitch will - choose a reasonable default.

+ initiate such negotiations themselves. If LACP is enabled on a port + whose partner switch does not support LACP, the bond will be + disabled. Defaults to off if unset. + + + + The LACP system ID of this . The system ID of a + LACP bond is used to identify itself to its partners. Must be a + nonzero MAC address. Defaults to the bridge Ethernet address if + unset. + + + + The LACP system priority of this . In LACP + negotiations, link status decisions are made by the system with the + numerically lower priority. + + + +

+ The LACP timing which should be used on this . + Possible values are fast, slow and a + positive number of milliseconds. By default slow is + used. When configured to be fast LACP heartbeats are + requested at a rate of once per second causing connectivity + problems to be detected more quickly. In slow mode, + heartbeats are requested at a rate of once every 30 seconds. +

+ +

+ Users may manually set a heartbeat transmission rate to increase + the fault detection speed further. When manually set, OVS expects + the partner switch to be configured with the same transmission + rate. Manually setting lacp-time to something other + than fast or slow is not supported by the + LACP specification. +

+ + + + Treat LACP like a simple heartbeat protocol for link state + monitoring. Most features of the LACP protocol are disabled + when this mode is in use. The default if not specified is + false. + + + + +

+ These settings control behavior when a bond is in + balance-slb mode, regardless of whether the bond was + intentionally configured in SLB mode or it fell back to SLB mode + because LACP negotiation failed. +

+ + + For a load balanced bonded port, the number of milliseconds between + successive attempts to rebalance the bond, that is, to move flows + from one interface on the bond to another in an attempt to keep usage + of each interface roughly equal. If zero, load balancing is disabled + on the bond (carrier status changes still cause flows to move). If + less than 1000ms, the rebalance interval will be 1000ms. + + + + + For a bonded port, whether to create a fake internal interface with the + name of the port. Use only for compatibility with legacy software that + requires this. + + + + + + If spanning tree is enabled on the bridge, member ports are + enabled by default (with the exception of bond, internal, and + mirror ports which do not work with STP). If this column's + value is false spanning tree is disabled on the + port. + + The port number used for the lower 8 bits of the port-id. By + default, the numbers will be assigned automatically. If any + port's number is manually configured on a bridge, then they + must all be. + + + + The port's relative priority value for determining the root + port (the upper 8 bits of the port-id). A port with a lower + port-id will be chosen as the root port. By default, the + priority is 0x80. + + + + Spanning tree path cost for the port. A lower number indicates + a faster link. By default, the cost is based on the maximum + speed of the link. + @@ -605,90 +1003,80 @@ Bridge? See ovs-vsctl(8) for more information. - + + External IDs for a fake bridge (see the + column) are defined by prefixing a key with + fake-bridge-, + e.g. fake-bridge-xs-network-uuids. + + + + +

+ Status information about ports attached to bridges. +

+ + Key-value pairs that report port status. + +

- Key-value pairs for use by external frameworks that integrate with - Open vSwitch, rather than by Open vSwitch itself. System integrators - should either use the Open vSwitch development mailing list to - coordinate on common key-value definitions, or choose key names that - are likely to be unique. + The port-id (in hex) used in spanning tree advertisements for + this port. Configuring the port-id is described in the + stp-port-num and stp-port-priority + keys of the other_config section earlier.

+ +

- No key-value pairs native to are currently - defined. For fake bridges (see the - column), external IDs for the fake bridge are defined here by - prefixing a key with fake-bridge-, - e.g. fake-bridge-xs-network-uuids. + STP state of the port.

- - - Key-value pairs for configuring rarely used port features. The - currently defined key-value pairs are: -
-
hwaddr
-
An Ethernet address in the form - xx:xx:xx:xx:xx:xx.
-
bond-rebalance-interval
-
For an SLB bonded port, the number of milliseconds between - successive attempts to rebalance the bond, that is, to - move source MACs and their flows from one interface on - the bond to another in an attempt to keep usage of each - interface roughly equal. The default is 10000 (10 - seconds), and the minimum is 1000 (1 second).
-
bond-detect-mode
-
Sets the method used to detect link failures in a bonded port. - Options are carrier and miimon. Defaults - to carrier which uses each interface's carrier to detect - failures. When set to miimon, will check for failures - by polling each interface's MII.
-
bond-miimon-interval
-
The number of milliseconds between successive attempts to - poll each interface's MII. Only relevant on ports which use - miimon to detect failures.
-
bond-hash-basis
-
An integer hashed along with flows when choosing output slaves. - When changed, all flows will be assigned different hash values - possibly causing slave selection decisions to change.
-
lacp-system-id
-
The LACP system ID of this . The system ID - of a LACP bond is used to identify itself to its partners. Must - be a nonzero MAC address.
-
lacp-system-priority
-
The LACP system priority of this . In - LACP negotiations, link status decisions are made by the system - with the numerically lower priority. Must be a number between 1 - and 65535.
-
lacp-time
-
-

The LACP timing which should be used on this - . Possible values are fast, - slow and a positive number of milliseconds. By - default slow is used. When configured to be - fast LACP heartbeats are requested at a rate of once - per second causing connectivity problems to be detected more - quickly. In slow mode, heartbeats are requested at - a rate of once every 30 seconds.

- -

Users may manually set a heartbeat transmission rate to increase - the fault detection speed further. When manually set, OVS - expects the partner switch to be configured with the same - transmission rate. Manually setting lacp-time to - something other than fast or slow is - not supported by the LACP specification.

-
-
lacp-strict
-
When true, configures this to - require successful LACP negotiations to enable any slaves. - Defaults to false which safely allows LACP to be used - with switches that do not support the protocol.
-
lacp-force-aggregatable
-
When true, forces all slaves managed by this - to advertise themselves as aggregatable even if - they normally wouldn't. Defaults to false.
-
+ +

+ The amount of time (in seconds) port has been in the current + STP state. +

+ +

+ STP role of the port. +

+ + + + +

+ Key-value pairs that report port statistics. +

+ + + Number of STP BPDUs sent on this port by the spanning + tree library. + + + Number of STP BPDUs received on this port and accepted by the + spanning tree library. + + + Number of bad STP BPDUs received on this port. Bad BPDUs + include runt packets and those with an unexpected protocol ID. + + + + + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +
@@ -705,19 +1093,19 @@

Ethernet address to set for this interface. If unset then the - default MAC address is used:

+ default MAC address is used:

Some interfaces may not have a software-controllable MAC address.

@@ -725,380 +1113,297 @@

OpenFlow port number for this interface. Unlike most columns, this - column's value should be set only by Open vSwitch itself. Other - clients should set this column to an empty set (the default) when - creating an .

+ column's value should be set only by Open vSwitch itself. Other + clients should set this column to an empty set (the default) when + creating an .

Open vSwitch populates this column when the port number becomes - known. If the interface is successfully added, - will be set to a number between 1 and 65535 - (generally either in the range 1 to 65279, inclusive, or 65534, the - port number for the OpenFlow ``local port''). If the interface - cannot be added then Open vSwitch sets this column - to -1.

+ known. If the interface is successfully added, + will be set to a number between 1 and 65535 + (generally either in the range 1 to 65279, inclusive, or 65534, the + port number for the OpenFlow ``local port''). If the interface + cannot be added then Open vSwitch sets this column + to -1.

 - The interface type, one of: +

+ The interface type, one of: +

+
system
An ordinary network device, e.g. eth0 on Linux. - Sometimes referred to as ``external interfaces'' since they are - generally connected to hardware external to that on which the Open - vSwitch is running. The empty string is a synonym for - system.
+ Sometimes referred to as ``external interfaces'' since they are + generally connected to hardware external to that on which the Open + vSwitch is running. The empty string is a synonym for + system. +
internal
A simulated network device that sends and receives traffic. An - internal interface whose is the same as its - bridge's is called the - ``local interface.'' It does not make sense to bond an internal - interface, so the terms ``port'' and ``interface'' are often used - imprecisely for internal interfaces.
+ internal interface whose is the same as its + bridge's is called the + ``local interface.'' It does not make sense to bond an internal + interface, so the terms ``port'' and ``interface'' are often used + imprecisely for internal interfaces. +
tap
A TUN/TAP device managed by Open vSwitch.
+
gre
-
An Ethernet over RFC 2890 Generic Routing Encapsulation over IPv4 - tunnel. Each tunnel must be uniquely identified by the - combination of remote_ip, local_ip, and - in_key. Note that if two ports are defined that are - the same except one has an optional identifier and the other does - not, the more specific one is matched first. in_key - is considered more specific than local_ip if a port - defines one and another port defines the other. The following - options may be specified in the column: -
-
remote_ip
-
Required. The tunnel endpoint.
-
-
-
local_ip
-
Optional. The destination IP that received packets must - match. Default is to match all addresses.
-
-
-
in_key
-
Optional. The GRE key that received packets must contain. - It may either be a 32-bit number (no key and a key of 0 are - treated as equivalent) or the word flow. If - flow is specified then any key will be accepted - and the key will be placed in the tun_id field - for matching in the flow table. The ovs-ofctl manual page - contains additional information about matching fields in - OpenFlow flows. Default is no key.
-
-
-
out_key
-
Optional. The GRE key to be set on outgoing packets. It may - either be a 32-bit number or the word flow. If - flow is specified then the key may be set using - the set_tunnel Nicira OpenFlow vendor extension (0 - is used in the absence of an action). The ovs-ofctl manual - page contains additional information about the Nicira OpenFlow - vendor extensions. Default is no key.
-
-
-
key
-
Optional. Shorthand to set in_key and - out_key at the same time.
-
-
-
tos
-
Optional. The value of the ToS bits to be set on the - encapsulating packet. It may also be the word - inherit, in which case the ToS will be copied from - the inner packet if it is IPv4 or IPv6 (otherwise it will be - 0). Note that the ECN fields are always inherited. Default is - 0.
-
-
-
ttl
-
Optional. The TTL to be set on the encapsulating packet. - It may also be the word inherit, in which case the - TTL will be copied from the inner packet if it is IPv4 or IPv6 - (otherwise it will be the system default, typically 64). - Default is the system default TTL.
-
-
-
csum
-
Optional. Compute GRE checksums on outgoing packets. - Checksums present on incoming packets will be validated - regardless of this setting. Note that GRE checksums - impose a significant performance penalty as they cover the - entire packet. As the contents of the packet is typically - covered by L3 and L4 checksums, this additional checksum only - adds value for the GRE and encapsulated Ethernet headers. - Default is disabled, set to true to enable.
-
-
-
df_inherit
-
Optional. If enabled, the Don't Fragment bit will be copied - from the inner IP headers (those of the encapsulated traffic) - to the outer (tunnel) headers. Default is disabled; set to - true to enable.
-
-
-
df_default
-
Optional. If enabled, the Don't Fragment bit will be set by - default on tunnel headers if the df_inherit option - is not set, or if the encapsulated packet is not IP. Default - is enabled; set to false to disable.
-
-
-
pmtud
-
Optional. Enable tunnel path MTU discovery. If enabled - ``ICMP Destination Unreachable - Fragmentation Needed'' - messages will be generated for IPv4 packets with the DF bit set - and IPv6 packets above the minimum MTU if the packet size - exceeds the path MTU minus the size of the tunnel headers. - Note that this option causes behavior that is typically - reserved for routers and therefore is not entirely in - compliance with the IEEE 802.1D specification for bridges. - Default is enabled; set to false to disable.
-
-
-
header_cache
-
Optional. Enable caching of tunnel headers and the output - path. This can lead to a significant performance increase - without changing behavior. In general it should not be - necessary to adjust this setting. However, the caching can - bypass certain components of the IP stack (such as IP tables) - and it may be useful to disable it if these features are - required or as a debugging measure. Default is enabled, set to - false to disable.
-
+
+ An Ethernet over RFC 2890 Generic Routing Encapsulation over IPv4 + tunnel. See for information on + configuring GRE tunnels.
+
ipsec_gre
-
An Ethernet over RFC 2890 Generic Routing Encapsulation - over IPv4 IPsec tunnel. Each tunnel (including those of type - gre) must be uniquely identified by the - combination of remote_ip and - local_ip. Note that if two ports are defined - that are the same except one has an optional identifier and - the other does not, the more specific one is matched first. - An authentication method of peer_cert or - psk must be defined. The following options may - be specified in the column: -
-
remote_ip
-
Required. The tunnel endpoint.
-
-
-
local_ip
-
Optional. The destination IP that received packets must - match. Default is to match all addresses.
-
-
-
peer_cert
-
Required for certificate authentication. A string - containing the peer's certificate in PEM format. - Additionally the host's certificate must be specified - with the certificate option.
-
-
-
certificate
-
Required for certificate authentication. The name of a - PEM file containing a certificate that will be presented - to the peer during authentication.
-
-
-
private_key
-
Optional for certificate authentication. The name of - a PEM file containing the private key associated with - certificate. If certificate - contains the private key, this option may be omitted.
-
-
-
psk
-
Required for pre-shared key authentication. Specifies a - pre-shared key for authentication that must be identical on - both sides of the tunnel.
-
-
-
in_key
-
Optional. The GRE key that received packets must contain. - It may either be a 32-bit number (no key and a key of 0 are - treated as equivalent) or the word flow. If - flow is specified then any key will be accepted - and the key will be placed in the tun_id field - for matching in the flow table. The ovs-ofctl manual page - contains additional information about matching fields in - OpenFlow flows. Default is no key.
-
-
-
out_key
-
Optional. The GRE key to be set on outgoing packets. It may - either be a 32-bit number or the word flow. If - flow is specified then the key may be set using - the set_tunnel Nicira OpenFlow vendor extension (0 - is used in the absence of an action). The ovs-ofctl manual - page contains additional information about the Nicira OpenFlow - vendor extensions. Default is no key.
-
-
-
key
-
Optional. Shorthand to set in_key and - out_key at the same time.
-
-
-
tos
-
Optional. The value of the ToS bits to be set on the - encapsulating packet. It may also be the word - inherit, in which case the ToS will be copied from - the inner packet if it is IPv4 or IPv6 (otherwise it will be - 0). Note that the ECN fields are always inherited. Default is - 0.
-
-
-
ttl
-
Optional. The TTL to be set on the encapsulating packet. - It may also be the word inherit, in which case the - TTL will be copied from the inner packet if it is IPv4 or IPv6 - (otherwise it will be the system default, typically 64). - Default is the system default TTL.
-
-
-
csum
-
Optional. Compute GRE checksums on outgoing packets. - Checksums present on incoming packets will be validated - regardless of this setting. Note that GRE checksums - impose a significant performance penalty as they cover the - entire packet. As the contents of the packet is typically - covered by L3 and L4 checksums, this additional checksum only - adds value for the GRE and encapsulated Ethernet headers. - Default is disabled, set to true to enable.
-
-
-
df_inherit
-
Optional. If enabled, the Don't Fragment bit will be copied - from the inner IP headers (those of the encapsulated traffic) - to the outer (tunnel) headers. Default is disabled; set to - true to enable.
-
-
-
df_default
-
Optional. If enabled, the Don't Fragment bit will be set by - default on tunnel headers if the df_inherit option - is not set, or if the encapsulated packet is not IP. Default - is enabled; set to false to disable.
-
-
-
pmtud
-
Optional. Enable tunnel path MTU discovery. If enabled - ``ICMP Destination Unreachable - Fragmentation Needed'' - messages will be generated for IPv4 packets with the DF bit set - and IPv6 packets above the minimum MTU if the packet size - exceeds the path MTU minus the size of the tunnel headers. - Note that this option causes behavior that is typically - reserved for routers and therefore is not entirely in - compliance with the IEEE 802.1D specification for bridges. - Default is enabled; set to false to disable.
-
+
+ An Ethernet over RFC 2890 Generic Routing Encapsulation over IPv4 + IPsec tunnel.
+
capwap
-
Ethernet tunneling over the UDP transport portion of CAPWAP - (RFC 5415). This allows interoperability with certain switches - where GRE is not available. Note that only the tunneling component - of the protocol is implemented. Due to the non-standard use of - CAPWAP, UDP ports 58881 and 58882 are used as the source and - destination ports respectively. Each tunnel must be uniquely - identified by the combination of remote_ip and - local_ip. If two ports are defined that are the same - except one includes local_ip and the other does not, - the more specific one is matched first. CAPWAP support is not - available on all platforms. Currently it is only supported in the - Linux kernel module with kernel versions >= 2.6.25. The following - options may be specified in the column: -
-
remote_ip
-
Required. The tunnel endpoint.
-
-
-
local_ip
-
Optional. The destination IP that received packets must - match. Default is to match all addresses.
-
-
-
tos
-
Optional. The value of the ToS bits to be set on the - encapsulating packet. It may also be the word - inherit, in which case the ToS will be copied from - the inner packet if it is IPv4 or IPv6 (otherwise it will be - 0). Note that the ECN fields are always inherited. Default is - 0.
-
-
-
ttl
-
Optional. The TTL to be set on the encapsulating packet. - It may also be the word inherit, in which case the - TTL will be copied from the inner packet if it is IPv4 or IPv6 - (otherwise it will be the system default, typically 64). - Default is the system default TTL.
-
-
-
df_inherit
-
Optional. If enabled, the Don't Fragment bit will be copied - from the inner IP headers (those of the encapsulated traffic) - to the outer (tunnel) headers. Default is disabled; set to - true to enable.
-
-
-
df_default
-
Optional. If enabled, the Don't Fragment bit will be set by - default on tunnel headers if the df_inherit option - is not set, or if the encapsulated packet is not IP. Default - is enabled; set to false to disable.
-
-
-
pmtud
-
Optional. Enable tunnel path MTU discovery. If enabled - ``ICMP Destination Unreachable - Fragmentation Needed'' - messages will be generated for IPv4 packets with the DF bit set - and IPv6 packets above the minimum MTU if the packet size - exceeds the path MTU minus the size of the tunnel headers. - Note that this option causes behavior that is typically - reserved for routers and therefore is not entirely in - compliance with the IEEE 802.1D specification for bridges. - Default is enabled; set to false to disable.
-
-
-
header_cache
-
Optional. Enable caching of tunnel headers and the output - path. This can lead to a significant performance increase - without changing behavior. In general it should not be - necessary to adjust this setting. However, the caching can - bypass certain components of the IP stack (such as IP tables) - and it may be useful to disable it if these features are - required or as a debugging measure. Default is enabled, set to - false to disable.
-
+
+ An Ethernet tunnel over the UDP transport portion of CAPWAP (RFC + 5415). This allows interoperability with certain switches that do + not support GRE. Only the tunneling component of the protocol is + implemented. UDP ports 58881 and 58882 are used as the source and + destination ports respectively. CAPWAP is currently supported only + with the Linux kernel datapath with kernel version 2.6.26 or later.
+
patch
-

- A pair of virtual devices that act as a patch cable. The column must have the following key-value pair: -

-
-
peer
-
- The of the for - the other side of the patch. The named 's own peer option must specify - this 's name. That is, the two patch - interfaces must have reversed and - peer values. -
-
+ A pair of virtual devices that act as a patch cable.
+
null
An ignored interface.
 + + + +

+ These options apply to interfaces with of + gre, ipsec_gre, and capwap. +

+ +

+ Each tunnel must be uniquely identified by the combination of , , , and . If two ports are defined that are the same except one + has an optional identifier and the other does not, the more specific + one is matched first. is + considered more specific than if + a port defines one and another port defines the other. +

+ + +

+ Required. The tunnel endpoint. Unicast and multicast endpoints are + both supported. +

+ +

+ When a multicast endpoint is specified, a routing table lookup occurs + only when the tunnel is created. Following a routing change, delete + and then re-create the tunnel to force a new routing table lookup. +

+ + + + Optional. The destination IP that received packets must match. + Default is to match all addresses. Must be omitted when is a multicast address. + + + +

Optional. The key that received packets must contain, one of:

+ +
    +
  • + 0. The tunnel receives packets with no key or with a + key of 0. This is equivalent to specifying no at all. +
    • +
  • + A positive 32-bit (for GRE) or 64-bit (for CAPWAP) number. The + tunnel receives only packets with the specified key. +
    • +
  • + The word flow. The tunnel accepts packets with any + key. The key will be placed in the tun_id field for + matching in the flow table. The ovs-ofctl manual page + contains additional information about matching fields in OpenFlow + flows. +
    • +
+ +

+

+ + + +

Optional. The key to be set on outgoing packets, one of:

+ +
    +
  • + 0. Packets sent through the tunnel will have no key. + This is equivalent to specifying no at all. +
    • +
  • + A positive 32-bit (for GRE) or 64-bit (for CAPWAP) number. Packets + sent through the tunnel will have the specified key. +
    • +
  • + The word flow. Packets sent through the tunnel will + have the key set using the set_tunnel Nicira OpenFlow + vendor extension (0 is used in the absence of an action). The + ovs-ofctl manual page contains additional information + about the Nicira OpenFlow vendor extensions. +
    • +
+ + + + Optional. Shorthand to set in_key and + out_key at the same time. + + + + Optional. The value of the ToS bits to be set on the encapsulating + packet. It may also be the word inherit, in which case + the ToS will be copied from the inner packet if it is IPv4 or IPv6 + (otherwise it will be 0). The ECN fields are always inherited. + Default is 0. + + + + Optional. The TTL to be set on the encapsulating packet. It may also + be the word inherit, in which case the TTL will be copied + from the inner packet if it is IPv4 or IPv6 (otherwise it will be the + system default, typically 64). Default is the system default TTL. + + + + Optional. If enabled, the Don't Fragment bit will be copied from the + inner IP headers (those of the encapsulated traffic) to the outer + (tunnel) headers. Default is disabled; set to true to + enable. + + + + Optional. If enabled, the Don't Fragment bit will be set by default on + tunnel headers if the df_inherit option is not set, or if + the encapsulated packet is not IP. Default is enabled; set to + false to disable. + + + + Optional. Enable tunnel path MTU discovery. If enabled ``ICMP + Destination Unreachable - Fragmentation Needed'' messages will be + generated for IPv4 packets with the DF bit set and IPv6 packets above + the minimum MTU if the packet size exceeds the path MTU minus the size + of the tunnel headers. Note that this option causes behavior that is + typically reserved for routers and therefore is not entirely in + compliance with the IEEE 802.1D specification for bridges. Default is + enabled; set to false to disable. + + + +

+ Only gre interfaces support these options. +

+ + + Enable caching of tunnel headers and the output path. This can lead + to a significant performance increase without changing behavior. In + general it should not be necessary to adjust this setting. However, + the caching can bypass certain components of the IP stack (such as + iptables) and it may be useful to disable it if these + features are required or as a debugging measure. Default is enabled, + set to false to disable. + + + + +

+ Only gre and ipsec_gre interfaces support + these options. +

+ + +

+ Optional. Compute GRE checksums on outgoing packets. Default is + disabled, set to true to enable. Checksums present on + incoming packets will be validated regardless of this setting. +

+ +

+ GRE checksums impose a significant performance penalty because they + cover the entire packet. The encapsulated L3, L4, and L7 packet + contents typically have their own checksums, so this additional + checksum only adds value for the GRE and encapsulated L2 headers. +

+ +

+ This option is supported for ipsec_gre, but not useful + because GRE checksums are weaker than, and redundant with, IPsec + payload authentication. +

+ + + + +

+ Only ipsec_gre interfaces support these options. +

+ + + Required for certificate authentication. A string containing the + peer's certificate in PEM format. Additionally the host's + certificate must be specified with the certificate + option. + + + + Required for certificate authentication. The name of a PEM file + containing a certificate that will be presented to the peer during + authentication. + + + + Optional for certificate authentication. The name of a PEM file + containing the private key associated with certificate. + If certificate contains the private key, this option may + be omitted. + - - Configuration options whose interpretation varies based on - . + + Required for pre-shared key authentication. Specifies a pre-shared + key for authentication that must be identical on both sides of the + tunnel. + + + + + +

+ Only patch interfaces support these options. +

+ + + The of the for the other + side of the patch. The named 's own + peer option must specify this 's + name. That is, the two patch interfaces must have reversed and peer values. @@ -1124,6 +1429,13 @@

+ +

+ The number of times Open vSwitch has observed the + of this change. +

+ +

The negotiated speed of the physical network link. @@ -1151,48 +1463,111 @@

+ + Boolean value indicating LACP status for this interface. If true, this + interface has current LACP information about its LACP partner. This + information may be used to monitor the health of interfaces in a LACP + enabled port. This column will be empty if LACP is not enabled. + + -

- Key-value pairs that report port status. Supported status - values are type-dependent; some interfaces may not have - a valid driver_name, for example. -

-

The currently defined key-value pairs are:

-
-
driver_name
-
The name of the device driver controlling the network - adapter.
-
-
-
driver_version
-
The version string of the device driver controlling the - network adapter.
-
-
-
firmware_version
-
The version string of the network adapter's firmware, if - available.
-
-
-
source_ip
-
The source IP address used for an IPv4 tunnel end-point, - such as gre or capwap.
-
-
-
tunnel_egress_iface
-
Egress interface for tunnels. Currently only relevant for GRE - and CAPWAP tunnels. On Linux systems, this column will show - the name of the interface which is responsible for routing - traffic destined for the configured remote_ip. - This could be an internal interface such as a bridge port.
-
-
-
tunnel_egress_iface_carrier
-
Whether a carrier is detected on . Valid values are down - and up.
-
+ Key-value pairs that report port status. Supported status values are + -dependent; some interfaces may not have a valid + , for example. + + + + The name of the device driver controlling the network adapter. + + + + The version string of the device driver controlling the network + adapter. + + + + The version string of the network adapter's firmware, if available. + + + + The source IP address used for an IPv4 tunnel end-point, such as + gre or capwap. + + + + Egress interface for tunnels. Currently only relevant for GRE and + CAPWAP tunnels. On Linux systems, this column will show the name of + the interface which is responsible for routing traffic destined for the + configured . This could be an + internal interface such as a bridge port. + + + Whether carrier is detected on . + + + + +

+ Key-value pairs that report interface statistics. The current + implementation updates these counters periodically. Future + implementations may update them when an interface is created, when they + are queried (e.g. using an OVSDB select operation), and + just before an interface is deleted due to virtual interface hot-unplug + or VM shutdown, and perhaps at other times, but not on any regular + periodic basis. +

+

+ These are the same statistics reported by OpenFlow in its struct + ofp_port_stats structure. If an interface does not support a + given statistic, then that pair is omitted. +

+ + + Number of received packets. + + + Number of received bytes. + + + Number of transmitted packets. + + + Number of transmitted bytes. + + + + + Number of packets dropped by RX. + + + Number of frame alignment errors. + + + Number of packets with RX overrun. + + + Number of CRC errors. + + + Total number of receive errors, greater than or equal to the sum of + the above. + + + + + Number of packets dropped by TX. + + + Number of collisions. + + + Total number of transmit errors, greater than or equal to the sum of + the above. + + @@ -1257,9 +1632,9 @@

Maximum burst size for data received on this interface, in kb. The - default burst size if set to 0 is 1000 kb. This value - has no effect if - is 0.

+ default burst size if set to 0 is 1000 kb. This value + has no effect if + is 0.

Specifying a larger burst size lets the algorithm be more forgiving, which is important for protocols like TCP that react severely to @@ -1271,161 +1646,404 @@ - + +

+ 802.1ag Connectivity Fault Management (CFM) allows a group of + Maintenance Points (MPs) called a Maintenance Association (MA) to + detect connectivity problems with each other. MPs within a MA should + have complete and exclusive interconnectivity. This is verified by + occasionally broadcasting Continuity Check Messages (CCMs) at a + configurable transmission interval. +

+ +

+ According to the 802.1ag specification, each Maintenance Point should + be configured out-of-band with a list of Remote Maintenance Points it + should have connectivity to. Open vSwitch differs from the + specification in this area. It simply assumes the link is faulted if + no Remote Maintenance Points are reachable, and considers it not + faulted otherwise. +

+ + + A Maintenance Point ID (MPID) uniquely identifies each endpoint within + a Maintenance Association. The MPID is used to identify this endpoint + to other Maintenance Points in the MA. Each end of a link being + monitored should have a different MPID. Must be configured to enable + CFM on this . + + + +

+ Indicates a connectivity fault triggered by an inability to receive + heartbeats from any remote endpoint. When a fault is triggered on + s participating in bonds, they will be + disabled. +

+

+ Faults can be triggered for several reasons. Most importantly they + are triggered when no CCMs are received for a period of 3.5 times the + transmission interval. Faults are also triggered when any CCMs + indicate that a Remote Maintenance Point is not receiving CCMs but + able to send them. Finally, a fault is triggered if a CCM is + received which indicates unexpected configuration. Notably, this + case arises when a CCM is received which advertises the local MPID. +

+ + + + Indicates a CFM fault was triggered due to a lack of CCMs received on + the . + + + + Indicates a CFM fault was triggered due to the reception of a CCM with + the RDI bit flagged. Endpoints set the RDI bit in their CCMs when they + are not receiving CCMs themselves. This typically indicates a + unidirectional connectivity failure. + + + + Indicates a CFM fault was triggered due to the reception of a CCM with + a MAID other than the one Open vSwitch uses. CFM broadcasts are tagged + with an identification number in addition to the MPID called the MAID. + Open vSwitch only supports receiving CCM broadcasts tagged with the + MAID it uses internally. + + + + Indicates a CFM fault was triggered due to the reception of a CCM + advertising the same MPID configured in the + column of this . This may indicate a loop in + the network. + + + + Indicates a CFM fault was triggered because the CFM module received + CCMs from more remote endpoints than it can keep track of. + + + + Indicates a CFM fault was manually triggered by an administrator using + an ovs-appctl command. + + + + When CFM is properly configured, Open vSwitch will occasionally + receive CCM broadcasts. These broadcasts contain the MPID of the + sending Maintenance Point. The list of MPIDs from which this + is receiving broadcasts from is regularly + collected and written to this column. + + + + The interval, in milliseconds, between transmissions of CFM heartbeats. + Three missed heartbeat receptions indicate a connectivity fault. + Defaults to 1000. + + + + When true, the CFM module operates in extended mode. This + causes it to use a nonstandard destination address to avoid conflicting + with compliant implementations which may be running concurrently on the + network. Furthermore, extended mode increases the accuracy of the + cfm_interval configuration parameter by breaking wire + compatibility with 802.1ag compliant implementations. Defaults to + false. + + + When down, the CFM module marks all CCMs it generates as + operationally down without triggering a fault. This allows remote + maintenance points to choose not to forward traffic to the + on which this CFM module is running. + Currently, in Open vSwitch, the opdown bit of CCMs affects + s participating in bonds, and the bundle + OpenFlow action. This setting is ignored when CFM is not in extended + mode. Defaults to up. + + + + When set, the CFM module will apply a VLAN tag to all CCMs it generates + with the given value. + + + + When set, the CFM module will apply a VLAN tag to all CCMs it generates + with the given PCP value. The VLAN ID of the tag is governed by the + value of . If + is unset, a VLAN ID of + zero is used. + + + + + + + Used in stable bond mode to make slave + selection decisions. Allocating values consistently across interfaces + participating in a bond will guarantee consistent slave selection + decisions across ovs-vswitchd instances when using + stable bonding mode. + + + + The LACP port ID of this . Port IDs are + used in LACP negotiations to identify individual ports + participating in a bond. + + + + The LACP port priority of this . In LACP + negotiations s with numerically lower + priorities are preferred for aggregation. + + + + The LACP aggregation key of this . s with different aggregation keys may not be active + within a given at the same time. + + + + +

+ These key-value pairs specifically apply to an interface that + represents a virtual Ethernet interface connected to a virtual + machine. These key-value pairs should not be present for other types + of interfaces. Keys whose names end in -uuid have + values that uniquely identify the entity in question. For a Citrix + XenServer hypervisor, these values are UUIDs in RFC 4122 format. + Other hypervisors may use other formats. +

+ + + The MAC address programmed into the ``virtual hardware'' for this + interface, in the form + xx:xx:xx:xx:xx:xx. + For Citrix XenServer, this is the value of the MAC field + in the VIF record for this interface. + + + + A system-unique identifier for the interface. On XenServer, this will + commonly be the same as . + + + + The virtual interface associated with this interface. + + + + The virtual network to which this interface is attached. + + + + The VM to which this interface belongs. On XenServer, this will be the + same as . + + + + The VM to which this interface belongs. + + + + +

+ The ``VLAN splinters'' feature increases Open vSwitch compatibility + with buggy network drivers in old versions of Linux that do not + properly support VLANs when VLAN devices are not used, at some cost + in memory and performance. +

+ +

+ When VLAN splinters are enabled on a particular interface, Open vSwitch + creates a VLAN device for each in-use VLAN. For sending traffic tagged + with a VLAN on the interface, it substitutes the VLAN device. Traffic + received on the VLAN device is treated as if it had been received on + the interface on the particular VLAN. +

+ +

+ VLAN splinters consider a VLAN to be in use if: +

+ + + +

+ The same set of in-use VLANs applies to every interface on which VLAN + splinters are enabled. That is, the set is not chosen separately for + each interface but selected once as the union of all in-use VLANs based + on the rules above. +

+ +

+ It does not make sense to enable VLAN splinters on an interface for an + access port, or on an interface that is not a physical port. +

+ +

+ VLAN splinters are deprecated. When broken device drivers are no + longer in widespread use, we will delete this feature. +

+ + +

+ Set to true to enable VLAN splinters on this interface. + Defaults to false. +

+ +

+ VLAN splinters increase kernel and userspace memory overhead, so do + not use them unless they are needed. +

+ +

+ VLAN splinters do not support 802.1p priority tags. Received + priorities will appear to be 0, regardless of their actual values, + and priorities on transmitted packets will also be cleared to 0. +

+ + + + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. - - Connectivity monitor configuration for this interface. - + + + + - - Boolean value indicating LACP status for this interface. If true, this - interface has current LACP information about its LACP partner. This - information may be used to monitor the health of interfaces in a LACP - enabled port. This column will be empty if LACP is not enabled. - + +

Configuration for a particular OpenFlow table.

- - Key-value pairs for use by external frameworks that integrate - with Open vSwitch, rather than by Open vSwitch itself. System - integrators should either use the Open vSwitch development - mailing list to coordinate on common key-value definitions, or - choose key names that are likely to be unique. The currently - defined common key-value pairs are: -
-
attached-mac
-
- The MAC address programmed into the ``virtual hardware'' for this - interface, in the form - xx:xx:xx:xx:xx:xx. - For Citrix XenServer, this is the value of the MAC - field in the VIF record for this interface.
-
iface-id
-
A system-unique identifier for the interface. On XenServer, - this will commonly be the same as xs-vif-uuid.
-
-

- Additionally the following key-value pairs specifically - apply to an interface that represents a virtual Ethernet interface - connected to a virtual machine. These key-value pairs should not be - present for other types of interfaces. Keys whose names end - in -uuid have values that uniquely identify the entity - in question. For a Citrix XenServer hypervisor, these values are - UUIDs in RFC 4122 format. Other hypervisors may use other - formats. -

-

The currently defined key-value pairs for XenServer are:

-
-
xs-vif-uuid
-
The virtual interface associated with this interface.
-
xs-network-uuid
-
The virtual network to which this interface is attached.
-
xs-vm-uuid
-
The VM to which this interface belongs.
-
- + + The table's name. Set this column to change the name that controllers + will receive when they request table statistics, e.g. ovs-ofctl + dump-tables. The name does not affect switch behavior. + - - Key-value pairs for rarely used interface features. -
-
bond-stable-id
-
A positive integer using in stable bond mode to - make slave selection decisions. Allocating - bond-stable-ids consistently across interfaces - participating in a bond will guarantee consistent slave selection - decisions across ovs-vswitchd instances when using - stable bonding mode.
-
lacp-port-id
-
The LACP port ID of this . Port IDs are - used in LACP negotiations to identify individual ports - participating in a bond. Must be a number between 1 and - 65535.
-
lacp-port-priority
-
The LACP port priority of this . In - LACP negotiations s with numerically lower - priorities are preferred for aggregation. Must be a number between - 1 and 65535.
-
lacp-aggregation-key
-
The LACP aggregation key of this . - s with different aggregation keys may not - be active within a given at the same time. Must - be a number between 1 and 65535.
-
- + + If set, limits the number of flows that may be added to the table. Open + vSwitch may limit the number of flows in a table for other reasons, + e.g. due to hardware limitations or for resource availability or + performance reasons. + - -

- Key-value pairs that report interface statistics. The current - implementation updates these counters periodically. In the future, - we plan to, instead, update them when an interface is created, when - they are queried (e.g. using an OVSDB select operation), - and just before an interface is deleted due to virtual interface - hot-unplug or VM shutdown, and perhaps at other times, but not on any - regular periodic basis.

-

- The currently defined key-value pairs are listed below. These are - the same statistics reported by OpenFlow in its struct - ofp_port_stats structure. If an interface does not support a - given statistic, then that pair is omitted.

- - - + +

+ Controls the switch's behavior when an OpenFlow flow table modification + request would add flows in excess of . The + supported values are: +

+ +
+
refuse
+
+ Refuse to add the flow or flows. This is also the default policy + when is unset. +
+ +
evict
+
+ Delete the flow that will expire soonest. See + for details. +
+
+ + + +

+ When is evict, this + controls how flows are chosen for eviction when the flow table would + otherwise exceed flows. Its value is a set + of NXM fields or sub-fields, each of which takes one of the forms + field[] or + field[start..end], + e.g. NXM_OF_IN_PORT[]. Please see + nicira-ext.h for a complete list of NXM field names. +

+ +

+ When a flow must be evicted due to overflow, the flow to evict is + chosen through an approximation of the following algorithm: +

+ +
    +
  1. + Divide the flows in the table into groups based on the values of the + specified fields or subfields, so that all of the flows in a given + group have the same values for those fields. If a flow does not + specify a given field, that field's value is treated as 0. +
    2. + +
  2. + Consider the flows in the largest group, that is, the group that + contains the greatest number of flows. If two or more groups all + have the same largest number of flows, consider the flows in all of + those groups. +
    3. + +
  3. + Among the flows under consideration, choose the flow that expires + soonest for eviction. +
    4. +
+ +

+ The eviction process only considers flows that have an idle timeout or + a hard timeout. That is, eviction never deletes permanent flows. + (Permanent flows do count against . +

+ +

+ Open vSwitch ignores any invalid or unknown field specifications. +

+ +

+ When is not evict, this + column has no effect. +

+

Quality of Service (QoS) configuration for each Port that - references it.

+ references it.

-

The type of QoS to implement. The column in the table - identifies the types that a switch actually supports. The currently - defined types are listed below:

+

The type of QoS to implement. The currently defined types are + listed below:

linux-htb
@@ -1447,180 +2065,134 @@

A map from queue numbers to records. The - supported range of queue numbers depend on . The - queue numbers are the same as the queue_id used in - OpenFlow in struct ofp_action_enqueue and other - structures. Queue 0 is used by OpenFlow output actions that do not - specify a specific queue.

- + supported range of queue numbers depend on . The + queue numbers are the same as the queue_id used in + OpenFlow in struct ofp_action_enqueue and other + structures.

- -

Key-value pairs for configuring QoS features that depend on - .

-

The linux-htb and linux-hfsc classes support - the following key-value pairs:

-
-
max-rate
-
Maximum rate shared by all queued traffic, in bit/s. - Optional. If not specified, for physical interfaces, the - default is the link rate. For other interfaces or if the - link rate cannot be determined, the default is currently 100 - Mbps.
-
+

+ Queue 0 is the ``default queue.'' It is used by OpenFlow output + actions when no specific queue has been set. When no configuration for + queue 0 is present, it is automatically configured as if a record with empty + and columns had been + specified. + (Before version 1.6, Open vSwitch would leave queue 0 unconfigured in + this case. With some queuing disciplines, this dropped all packets + destined for the default queue.) +

- - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. - + +

+ The linux-htb and linux-hfsc classes support + the following key-value pair: +

+ + + Maximum rate shared by all queued traffic, in bit/s. Optional. If not + specified, for physical interfaces, the default is the link rate. For + other interfaces or if the link rate cannot be determined, the default + is currently 100 Mbps. + + + + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + + +

A configuration for a port output queue, used in configuring Quality of - Service (QoS) features. May be referenced by column in table.

- - -

Key-value pairs for configuring the output queue. The supported - key-value pairs and their meanings depend on the - of the records that reference this row.

-

The key-value pairs defined for of min-rate are:

-
-
min-rate
-
Minimum guaranteed bandwidth, in bit/s. Required. The - floor value is 1500 bytes/s (12,000 bit/s).
-
-

The key-value pairs defined for of linux-htb are:

-
-
min-rate
-
Minimum guaranteed bandwidth, in bit/s.
-
max-rate
-
Maximum allowed bandwidth, in bit/s. Optional. If specified, the - queue's rate will not be allowed to exceed the specified value, even - if excess bandwidth is available. If unspecified, defaults to no - limit.
-
burst
-
Burst size, in bits. This is the maximum amount of ``credits'' - that a queue can accumulate while it is idle. Optional. Details of - the linux-htb implementation require a minimum burst - size, so a too-small burst will be silently - ignored.
-
priority
-
A nonnegative 32-bit integer. Defaults to 0 if - unspecified. A queue with a smaller priority - will receive all the excess bandwidth that it can use before - a queue with a larger value receives any. Specific priority - values are unimportant; only relative ordering matters.
-
-

The key-value pairs defined for of linux-hfsc are:

-
-
min-rate
-
Minimum guaranteed bandwidth, in bit/s.
-
max-rate
-
Maximum allowed bandwidth, in bit/s. Optional. If specified, the - queue's rate will not be allowed to exceed the specified value, even - if excess bandwidth is available. If unspecified, defaults to no - limit.
-
- - - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. + Service (QoS) features. May be referenced by column in table.

+ + + If set, Open vSwitch will mark all traffic egressing this + with the given DSCP bits. Traffic egressing the + default is only marked if it was explicitly selected + as the at the time the packet was output. If unset, + the DSCP bits of traffic egressing this will remain + unchanged. -
- - -

- A attaches to an to - implement 802.1ag Connectivity Fault Management (CFM). CFM allows a - group of Maintenance Points (MPs) called a Maintenance Association (MA) - to detect connectivity problems with each other. MPs within a MA should - have complete and exclusive interconnectivity. This is verified by - occasionally broadcasting Continuity Check Messages (CCMs) at a - configurable transmission interval. A is - responsible for collecting data about other MPs in its MA and - broadcasting CCMs. -

- - - A Maintenance Point ID (MPID) uniquely identifies each endpoint within - a Maintenance Association (see ). The MPID is - used to identify this to other endpoints in the - MA. - + +

+ + linux-htb may use queue_ids less than 61440. + It has the following key-value pairs defined. +

- - A set of which this - should have connectivity to. If this - does not have connectivity to any MPs in this - set, or has connectivity to any MPs not in this set, a fault is - signaled. + + Minimum guaranteed bandwidth, in bit/s. - - A Maintenance Association (MA) name pairs with a Maintenance Domain - (MD) name to uniquely identify a MA. A MA is a group of endpoints who - have complete and exclusive interconnectivity. Defaults to - ovs if unset. + + Maximum allowed bandwidth, in bit/s. Optional. If specified, the + queue's rate will not be allowed to exceed the specified value, even + if excess bandwidth is available. If unspecified, defaults to no + limit. - - A Maintenance Domain name pairs with a Maintenance Association name to - uniquely identify a MA. Defaults to ovs if unset. + + Burst size, in bits. This is the maximum amount of ``credits'' that a + queue can accumulate while it is idle. Optional. Details of the + linux-htb implementation require a minimum burst size, so + a too-small burst will be silently ignored. - - The transmission interval of CCMs in milliseconds. Three missed CCMs - indicate a connectivity fault. Defaults to 1000ms. + + A queue with a smaller priority will receive all the + excess bandwidth that it can use before a queue with a larger value + receives any. Specific priority values are unimportant; only relative + ordering matters. Defaults to 0 if unspecified. - - - Indicates a Connectivity Fault caused by a configuration error, a down - remote MP, or unexpected connectivity to a remote MAID or remote MP. - - -
+ +

+ + linux-hfsc may use queue_ids less than 61440. + It has the following key-value pairs defined. +

- -

- A represents a MP which a - has or should have connectivity to. -

+ + Minimum guaranteed bandwidth, in bit/s. + - - - A Maintenance Point ID (MPID) uniquely identifies each endpoint within - a Maintenance Association. All MPs within a MA should have a unique - MPID. + + Maximum allowed bandwidth, in bit/s. Optional. If specified, the + queue's rate will not be allowed to exceed the specified value, even if + excess bandwidth is available. If unspecified, defaults to no + limit. - - - Indicates a connectivity fault. - + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +
- +

A port mirror within a .

A port mirror configures a bridge to send selected frames to special - ``mirrored'' ports, in addition to their normal destinations. Mirroring - traffic may also be referred to as SPAN or RSPAN, depending on the - mechanism used for delivery.

+ ``mirrored'' ports, in addition to their normal destinations. Mirroring + traffic may also be referred to as SPAN or RSPAN, depending on how + the mirrored traffic is sent.

Arbitrary identifier for the . @@ -1661,58 +2233,107 @@

Output port for selected packets, if nonempty.

Specifying a port for mirror output reserves that port exclusively - for mirroring. No frames other than those selected for mirroring - will be forwarded to the port, and any frames received on the port - will be discarded.

-

This type of mirroring is sometimes called SPAN.

+ for mirroring. No frames other than those selected for mirroring + via this column + will be forwarded to the port, and any frames received on the port + will be discarded.

+

+ The output port may be any kind of port supported by Open vSwitch. + It may be, for example, a physical port (sometimes called SPAN) or a + GRE tunnel. +

Output VLAN for selected packets, if nonempty.

The frames will be sent out all ports that trunk - , as well as any ports with implicit VLAN - . When a mirrored frame is sent out a - trunk port, the frame's VLAN tag will be set to - , replacing any existing tag; when it is - sent out an implicit VLAN port, the frame will not be tagged. This - type of mirroring is sometimes called RSPAN.

+ , as well as any ports with implicit VLAN + . When a mirrored frame is sent out a + trunk port, the frame's VLAN tag will be set to + , replacing any existing tag; when it is + sent out an implicit VLAN port, the frame will not be tagged. This + type of mirroring is sometimes called RSPAN.

+

+ The following destination MAC addresses will not be mirrored to a + VLAN to avoid confusing switches that interpret the protocols that + they represent: +

+
+
01:80:c2:00:00:00
+
IEEE 802.1D Spanning Tree Protocol (STP).
+ +
01:80:c2:00:00:01
+
IEEE Pause frame.
+ +
01:80:c2:00:00:0x
+
Other reserved protocols.
+ +
01:00:0c:cc:cc:cc
+
+ Cisco Discovery Protocol (CDP), VLAN Trunking Protocol (VTP), + Dynamic Trunking Protocol (DTP), Port Aggregation Protocol (PAgP), + and others. +
+ +
01:00:0c:cc:cc:cd
+
Cisco Shared Spanning Tree Protocol PVSTP+.
+ +
01:00:0c:cd:cd:cd
+
Cisco STP Uplink Fast.
+ +
01:00:0c:00:00:00
+
Cisco Inter Switch Link.
+

Please note: Mirroring to a VLAN can disrupt a network that - contains unmanaged switches. Consider an unmanaged physical switch - with two ports: port 1, connected to an end host, and port 2, - connected to an Open vSwitch configured to mirror received packets - into VLAN 123 on port 2. Suppose that the end host sends a packet on - port 1 that the physical switch forwards to port 2. The Open vSwitch - forwards this packet to its destination and then reflects it back on - port 2 in VLAN 123. This reflected packet causes the unmanaged - physical switch to replace the MAC learning table entry, which - correctly pointed to port 1, with one that incorrectly points to port - 2. Afterward, the physical switch will direct packets destined for - the end host to the Open vSwitch on port 2, instead of to the end - host on port 1, disrupting connectivity. If mirroring to a VLAN is - desired in this scenario, then the physical switch must be replaced - by one that learns Ethernet addresses on a per-VLAN basis. In - addition, learning should be disabled on the VLAN containing mirrored - traffic. If this is not done then intermediate switches will learn - the MAC address of each end host from the mirrored traffic. If - packets being sent to that end host are also mirrored, then they will - be dropped since the switch will attempt to send them out the input - port. Disabling learning for the VLAN will cause the switch to - correctly send the packet out all ports configured for that VLAN. If - Open vSwitch is being used as an intermediate switch, learning can be - disabled by adding the mirrored VLAN to - in the appropriate table or tables.

+ contains unmanaged switches. Consider an unmanaged physical switch + with two ports: port 1, connected to an end host, and port 2, + connected to an Open vSwitch configured to mirror received packets + into VLAN 123 on port 2. Suppose that the end host sends a packet on + port 1 that the physical switch forwards to port 2. The Open vSwitch + forwards this packet to its destination and then reflects it back on + port 2 in VLAN 123. This reflected packet causes the unmanaged + physical switch to replace the MAC learning table entry, which + correctly pointed to port 1, with one that incorrectly points to port + 2. Afterward, the physical switch will direct packets destined for + the end host to the Open vSwitch on port 2, instead of to the end + host on port 1, disrupting connectivity. If mirroring to a VLAN is + desired in this scenario, then the physical switch must be replaced + by one that learns Ethernet addresses on a per-VLAN basis. In + addition, learning should be disabled on the VLAN containing mirrored + traffic. If this is not done then intermediate switches will learn + the MAC address of each end host from the mirrored traffic. If + packets being sent to that end host are also mirrored, then they will + be dropped since the switch will attempt to send them out the input + port. Disabling learning for the VLAN will cause the switch to + correctly send the packet out all ports configured for that VLAN. If + Open vSwitch is being used as an intermediate switch, learning can be + disabled by adding the mirrored VLAN to + in the appropriate table or tables.

+

+ Mirroring to a GRE tunnel has fewer caveats than mirroring to a + VLAN and should generally be preferred. +

- - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. + +

+ Key-value pairs that report mirror statistics. +

+ + Number of packets transmitted through this mirror. + + + Number of bytes transmitted through this mirror. + + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +
@@ -1793,12 +2414,12 @@ column in the table must point to a valid SSL configuration when this form is used.

SSL support is an optional feature that is not always built as - part of Open vSwitch.

+ part of Open vSwitch.

tcp:ip[:port]
The specified TCP port (default: 6633) on the host at - the given ip, which must be expressed as an IP address - (not a DNS name).
+ the given ip, which must be expressed as an IP address + (not a DNS name).

The following connection methods are currently supported for service @@ -1819,7 +2440,7 @@ configuration when this form is used.

SSL support is an optional feature that is not always built as - part of Open vSwitch.

+ part of Open vSwitch.

ptcp:[port][:ip]
@@ -1830,8 +2451,8 @@

When multiple controllers are configured for a single bridge, the - values must be unique. Duplicate - values yield unspecified results.

+ values must be unique. Duplicate + values yield unspecified results.

@@ -1842,19 +2463,19 @@
in-band
In this mode, this controller's OpenFlow traffic travels over the - bridge associated with the controller. With this setting, Open - vSwitch allows traffic to and from the controller regardless of the - contents of the OpenFlow flow table. (Otherwise, Open vSwitch - would never be able to connect to the controller, because it did - not have a flow to enable it.) This is the most common connection - mode because it is not necessary to maintain two independent - networks.
+ bridge associated with the controller. With this setting, Open + vSwitch allows traffic to and from the controller regardless of the + contents of the OpenFlow flow table. (Otherwise, Open vSwitch + would never be able to connect to the controller, because it did + not have a flow to enable it.) This is the most common connection + mode because it is not necessary to maintain two independent + networks.
out-of-band
In this mode, OpenFlow traffic uses a control network separate - from the bridge associated with this controller, that is, the - bridge does not use any of its own network devices to communicate - with the controller. The control network must be configured - separately, before or after ovs-vswitchd is started. + from the bridge associated with this controller, that is, the + bridge does not use any of its own network devices to communicate + with the controller. The control network must be configured + separately, before or after ovs-vswitchd is started.
@@ -1880,43 +2501,68 @@ - - -

The maximum rate at which packets in unknown flows will be - forwarded to the OpenFlow controller, in packets per second. This - feature prevents a single bridge from overwhelming the controller. - If not specified, the default is implementation-specific.

-

In addition, when a high rate triggers rate-limiting, Open - vSwitch queues controller packets for each port and transmits - them to the controller at the configured rate. The number of - queued packets is limited by - the value. The packet - queue is shared fairly among the ports on a bridge.

Open - vSwitch maintains two such packet rate-limiters per bridge. - One of these applies to packets sent up to the controller - because they do not correspond to any flow. The other applies - to packets sent up to the controller by request through flow - actions. When both rate-limiters are filled with packets, the - actual rate that packets are sent to the controller is up to - twice the specified rate.

- + +

+ OpenFlow switches send certain messages to controllers spontanenously, + that is, not in response to any request from the controller. These + messages are called ``asynchronous messages.'' These columns allow + asynchronous messages to be limited or disabled to ensure the best use + of network resources. +

- - In conjunction with , - the maximum number of unused packet credits that the bridge will - allow to accumulate, in packets. If not specified, the default - is implementation-specific. - + + The OpenFlow protocol enables asynchronous messages at time of + connection establishment, which means that a controller can receive + asynchronous messages, potentially many of them, even if it turns them + off immediately after connecting. Set this column to + false to change Open vSwitch behavior to disable, by + default, all asynchronous messages. The controller can use the + NXT_SET_ASYNC_CONFIG Nicira extension to OpenFlow to turn + on any messages that it does want to receive, if any. + + + +

+ The maximum rate at which the switch will forward packets to the + OpenFlow controller, in packets per second. This feature prevents a + single bridge from overwhelming the controller. If not specified, + the default is implementation-specific. +

+ +

+ In addition, when a high rate triggers rate-limiting, Open vSwitch + queues controller packets for each port and transmits them to the + controller at the configured rate. The value limits the number of queued + packets. Ports on a bridge share the packet queue fairly. +

+ +

+ Open vSwitch maintains two such packet rate-limiters per bridge: one + for packets sent up to the controller because they do not correspond + to any flow, and the other for packets sent up to the controller by + request through flow actions. When both rate-limiters are filled with + packets, the actual rate that packets are sent to the controller is + up to twice the specified rate. +

+ + + + In conjunction with , + the maximum number of unused packet credits that the bridge will + allow to accumulate, in packets. If not specified, the default + is implementation-specific. +

These values are considered only in in-band control mode (see - ).

+ ).

When multiple controllers are configured on a single bridge, there - should be only one set of unique values in these columns. If different - values are set for these columns in different controllers, the effect - is unspecified.

+ should be only one set of unique values in these columns. If different + values are set for these columns in different controllers, the effect + is unspecified.

The IP address to configure on the local port, @@ -1939,69 +2585,87 @@ - - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. - - - true if currently connected to this controller, false otherwise. - +

The level of authority this controller has on the associated - bridge. Possible values are:

+ bridge. Possible values are:

other
Allows the controller access to all OpenFlow features.
master
Equivalent to other, except that there may be at - most one master controller at a time. When a controller configures - itself as master, any existing master is demoted to - the slaverole.
+ most one master controller at a time. When a controller configures + itself as master, any existing master is demoted to + the slaverole.
slave
Allows the controller read-only access to OpenFlow features. - Attempts to modify the flow table will be rejected with an - error. Slave controllers do not receive OFPT_PACKET_IN or - OFPT_FLOW_REMOVED messages, but they do receive OFPT_PORT_STATUS - messages.
+ Attempts to modify the flow table will be rejected with an + error. Slave controllers do not receive OFPT_PACKET_IN or + OFPT_FLOW_REMOVED messages, but they do receive OFPT_PORT_STATUS + messages.
- -

Key-value pairs that report controller status.

+ + A human-readable description of the last error on the connection + to the controller; i.e. strerror(errno). This key + will exist only if an error has occurred. + + + +

+ The state of the connection to the controller: +

-
last_error
-
A human-readable description of the last error on the connection - to the controller; i.e. strerror(errno). This key - will exist only if an error has occurred.
-
state
-
The state of the connection to the controller. Possible values - are: VOID (connection is disabled), - BACKOFF (attempting to reconnect at an increasing - period), CONNECTING (attempting to connect), - ACTIVE (connected, remote host responsive), and - IDLE (remote host idle, sending keep-alive). These - values may change in the future. They are provided only for human - consumption.
-
sec_since_connect
-
The amount of time since this controller last successfully - connected to the switch (in seconds). Value is empty if controller - has never successfully connected.
-
sec_since_disconnect
-
The amount of time since this controller last disconnected from - the switch (in seconds). Value is empty if controller has never - disconnected.
+
VOID
+
Connection is disabled.
+ +
BACKOFF
+
Attempting to reconnect at an increasing period.
+ +
CONNECTING
+
Attempting to connect.
+ +
ACTIVE
+
Connected, remote host responsive.
+ +
IDLE
+
Connection is idle. Waiting for response to keep-alive.
+

+ These values may change in the future. They are provided only for + human consumption. +

+ + + + The amount of time since this controller last successfully connected to + the switch (in seconds). Value is empty if controller has never + successfully connected. + + + + The amount of time since this controller last disconnected from + the switch (in seconds). Value is empty if controller has never + disconnected. + + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +
@@ -2133,55 +2797,99 @@ - - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. - - - true if currently connected to this manager, false otherwise. - -

Key-value pairs that report manager status.

-
-
last_error
-
A human-readable description of the last error on the connection - to the manager; i.e. strerror(errno). This key - will exist only if an error has occurred.
-
-
-
state
-
The state of the connection to the manager. Possible values - are: VOID (connection is disabled), - BACKOFF (attempting to reconnect at an increasing - period), CONNECTING (attempting to connect), - ACTIVE (connected, remote host responsive), and - IDLE (remote host idle, sending keep-alive). These - values may change in the future. They are provided only for human - consumption.
-
-
-
sec_since_connect
-
The amount of time since this manager last successfully connected - to the database (in seconds). Value is empty if manager has never - successfully connected.
-
+ + A human-readable description of the last error on the connection + to the manager; i.e. strerror(errno). This key + will exist only if an error has occurred. + + + +

+ The state of the connection to the manager: +

-
sec_since_disconnect
-
The amount of time since this manager last disconnected from the - database (in seconds). Value is empty if manager has never - disconnected.
+
VOID
+
Connection is disabled.
+ +
BACKOFF
+
Attempting to reconnect at an increasing period.
+ +
CONNECTING
+
Attempting to connect.
+ +
ACTIVE
+
Connected, remote host responsive.
+ +
IDLE
+
Connection is idle. Waiting for response to keep-alive.
+

+ These values may change in the future. They are provided only for + human consumption. +

+ + + + The amount of time since this manager last successfully connected + to the database (in seconds). Value is empty if manager has never + successfully connected. + + + + The amount of time since this manager last disconnected from the + database (in seconds). Value is empty if manager has never + disconnected. + + + + Space-separated list of the names of OVSDB locks that the connection + holds. Omitted if the connection does not hold any locks. + + + + Space-separated list of the names of OVSDB locks that the connection is + currently waiting to acquire. Omitted if the connection is not waiting + for any locks. + + + + Space-separated list of the names of OVSDB locks that the connection + has had stolen by another OVSDB client. Omitted if no locks have been + stolen from this connection. + + + +

+ When specifies a connection method that + listens for inbound connections (e.g. ptcp: or + pssl:) and more than one connection is actually active, + the value is the number of active connections. Otherwise, this + key-value pair is omitted. +

+

+ When multiple connections are active, status columns and key-value + pairs (other than this one) report the status of one arbitrarily + chosen connection. +

+ + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +
@@ -2214,23 +2922,22 @@

If this column's value is false, the ingress and egress - interface fields of NetFlow flow records are derived from OpenFlow port - numbers. When it is true, the 7 most significant bits of - these fields will be replaced by the least significant 7 bits of the - engine id. This is useful because many NetFlow collectors do not - expect multiple switches to be sending messages from the same host, so - they do not store the engine information which could be used to - disambiguate the traffic.

+ interface fields of NetFlow flow records are derived from OpenFlow port + numbers. When it is true, the 7 most significant bits of + these fields will be replaced by the least significant 7 bits of the + engine id. This is useful because many NetFlow collectors do not + expect multiple switches to be sending messages from the same host, so + they do not store the engine information which could be used to + disambiguate the traffic.

When this option is enabled, a maximum of 508 ports are supported.

 - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. - + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +
@@ -2260,29 +2967,30 @@ it will immediately drop the connection and reconnect, and from then on all SSL connections must be authenticated by a certificate signed by the CA certificate thus obtained. This option exposes the - SSL connection to a man-in-the-middle attack obtaining the initial - CA certificate. It may still be useful for bootstrapping. + SSL connection to a man-in-the-middle attack obtaining the initial + CA certificate. It may still be useful for bootstrapping. - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. - + + The overall purpose of these columns is described under Common + Columns at the beginning of this document. + + +

An sFlow(R) target. sFlow is a protocol for remote monitoring - of switches.

+ of switches.

Name of the network device whose IP address should be reported as the - ``agent address'' to collectors. If not specified, the IP address + ``agent address'' to collectors. If not specified, the agent device is + figured from the first target address and the routing table. If the + routing table does not contain a route to the target, the IP address defaults to the in the collector's . If an agent IP address cannot be - determined either way, sFlow is disabled. + determined any of these ways, sFlow is disabled. @@ -2306,54 +3014,12 @@ ip:port. - - Key-value pairs for use by external frameworks that integrate with Open - vSwitch, rather than by Open vSwitch itself. System integrators should - either use the Open vSwitch development mailing list to coordinate on - common key-value definitions, or choose key names that are likely to be - unique. No common key-value pairs are currently defined. - -
- - -

Records in this table describe functionality supported by the hardware - and software platform on which this Open vSwitch is based. Clients - should not modify this table.

- -

A record in this table is meaningful only if it is referenced by the - column in the - table. The key used to reference it, called - the record's ``category,'' determines the meanings of the - column. The following general forms of - categories are currently defined:

- -
-
qos-type
-
type is supported as the value for - in the table. -
-
- - -

Key-value pairs that describe capabilities. The meaning of the pairs - depends on the category key that the column in the table - uses to reference this record, as described above.

+ + The overall purpose of these columns is described under Common + Columns at the beginning of this document. -

The presence of a record for category qos-type - indicates that the switch supports type as the value of - the column in the - table. The following key-value pairs are defined to further describe - QoS capabilities:

- -
-
n-queues
-
Number of supported queues, as a positive integer. Keys in the - column for - records whose value - equals type must range between 0 and this value minus one, - inclusive.
-
- + +
+