X-Git-Url: http://git.onelab.eu/?a=blobdiff_plain;f=vswitchd%2Fvswitch.xml;h=daac9e1db66ae96f6669bcb8d823f41553e83ca9;hb=de72402954abc382e63532e6d179583c5eea6227;hp=85bf16277875514aaa45938912afb5776a783fe3;hpb=296f651909b7ea4de7a9450c0787fc3c4051efc1;p=sliver-openvswitch.git
diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index 85bf16277..daac9e1db 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -25,6 +25,19 @@
SSL used globally by the daemon.
+ xs-system-uuid
.xs-system-uuid
xe host-list
.
+ Statistics are disabled unless is set to true
.
+
cpu
+ VLAN IDs of VLANs on which MAC address learning should be disabled, + so that packets are flooded instead of being sent to specific ports + that are believed to contain packets' destination MACs. This should + ordinarily be used to disable MAC learning on VLANs used for + mirroring (RSPAN VLANs). It may also be useful for debugging. +
+
+ SLB bonding (see the column in
+ the table) is incompatible with
+ flood_vlans
. Consider using another bonding mode or
+ a different type of mirror instead.
+
other-config
- instead.)
+ Reports the OpenFlow datapath ID in use. Exactly 16 hex digits.
+ (Setting this column has no useful effect. Set instead.)
bridge-id
xs-network-uuids
.xs-network-uuids
flow-eviction-threshold
forward-bpdu
true
to enable.
+ Attempts to always assign a given flow to the same slave
consistently. In an effort to maintain stability, no load
balancing is done. Uses a similar hashing strategy to
- balance-tcp
, falling back to balance-slb
- style hashing when LACP negotiations are unsuccessful.
Slave selection decisions are made based on
- bond-stable-id
if set. Otherwise, OpenFlow port
- number is used. Decisions are consistent across all ovs-vswitchd
- instances with equivalent bond-stable-id
s.
balance-tcp
, always taking into account L3 and L4
+ fields even if LACP negotiations are unsuccessful.
+ Slave selection decisions are made based on if set. Otherwise,
+ OpenFlow port number is used. Decisions are consistent across all
+ ovs-vswitchd
instances with equivalent
+
+ values.
active
ports are allowed to initiate LACP
negotiations. passive
ports are allowed to participate
in LACP negotiations initiated by a remote switch, but not allowed to
- initiate such negotiations themselves. If unset Open vSwitch will
- choose a reasonable default.
+ initiate such negotiations themselves. Defaults to off
+ if unset.
@@ -627,9 +680,6 @@
Key-value pairs for configuring rarely used port features. The
currently defined key-value pairs are:
hwaddr
xx:xx:xx:xx:xx:xx
.bond-rebalance-interval
gre
remote_ip
, local_ip
, and
- in_key
. Note that if two ports are defined that are
- the same except one has an optional identifier and the other does
- not, the more specific one is matched first. in_key
- is considered more specific than local_ip
if a port
- defines one and another port defines the other. The following
- options may be specified in the column:
+ tunnel. Each tunnel must be uniquely identified by the
+ combination of ,
+ , and
+ . Note that if two ports
+ are defined that are the same except one has an optional
+ identifier and the other does not, the more specific one is
+ matched first. is considered
+ more specific than if a port
+ defines one and another port defines the other. The following
+ options may be specified in the column:
remote_ip
gre
) must be uniquely identified by the
- combination of remote_ip
and
- local_ip
. Note that if two ports are defined
- that are the same except one has an optional identifier and
+ combination of and
+ . Note that if two ports are
+ defined that are the same except one has an optional identifier and
the other does not, the more specific one is matched first.
- An authentication method of peer_cert
or
- psk
must be defined. The following options may
- be specified in the column:
+ An authentication method of
+ or must be defined. The
+ following options may be specified in the
+ column:
remote_ip
remote_ip
and
- local_ip
. If two ports are defined that are the same
- except one includes local_ip
and the other does not,
- the more specific one is matched first. CAPWAP support is not
+ identified by the combination of
+ and
+ . If two ports are defined
+ that are the same except one includes
+ and the other does not, the
+ more specific one is matched first. CAPWAP support is not
available on all platforms. Currently it is only supported in the
Linux kernel module with kernel versions >= 2.6.25. The following
options may be specified in the column:
@@ -1148,9 +1203,9 @@
- Key-value pairs that report port status. Supported status
- values are type
-dependent; some interfaces may not have
- a valid driver_name
, for example.
+ Key-value pairs that report port status. Supported status values are
+ -dependent; some interfaces may not have a valid
+ , for example.
The currently defined key-value pairs are:
remote_ip
.
- This could be an internal interface such as a bridge port.tunnel_egress_iface_carrier
down
- and up
.down
and up
.+ According to the 802.1ag specification, each Maintenance Point should + be configured out-of-band with a list of Remote Maintenance Points it + should have connectivity to. Open vSwitch differs from the + specification in this area. It simply assumes the link is faulted if + no Remote Maintenance Points are reachable, and considers it not + faulted otherwise. +
++ Indicates a connectivity fault triggered by an inability to receive + heartbeats from any remote endpoint. When a fault is triggered on + s participating in bonds, they will be + disabled. +
++ Faults can be triggered for several reasons. Most importantly they + are triggered when no CCMs are received for a period of 3.5 times the + transmission interval. Faults are also triggered when any CCMs + indicate that a Remote Maintenance Point is not receiving CCMs but + able to send them. Finally, a fault is triggered if a CCM is + received which indicates unexpected configuration. Notably, this + case arises when a CCM is received which advertises the local MPID. +
iface-id
xs-vif-uuid
.Additionally the following key-value pairs specifically @@ -1355,13 +1425,22 @@
cfm_extended
cfm_interval
configuration parameter by breaking
+ wire compatibility with 802.1ag compliant implementations.
+ Defaults to false.bond-stable-id
stable
bond mode to
make slave selection decisions. Allocating
- bond-stable-id
s consistently across interfaces
- participating in a bond will guarantee consistent slave selection
- decisions across ovs-vswitchd instances when using
- stable
bonding mode.ovs-vswitchd
instances when using stable
+ bonding mode.
lacp-port-id