-[
-
-### this applies on Node, not on Slice
-### # Slice type (only vserver is supported)
-### {'tagname': "type",
-### 'description': "Type of slice (e.g. vserver)",
-### 'category' : 'slice/general',
-### 'roles': ['admin','pi']},
-
- # System slice
- {'tagname': "system",
- 'description': "Is a default system slice (1) or not (0 or unset)",
- 'category' : 'slice/general'},
-
- # Slice enabled (1) or suspended (0)
- {'tagname': "enabled",
- 'description': "Slice enabled (1 or unset) or suspended (0)",
- 'category' : 'slice/general'},
-
- # IP Addresses for a Slice
- {'tagname': "ip_addresses",
- 'description': "Add an ip address to a slice/sliver.",
- 'category' : 'slice/rspec'},
- {'tagname': "isolate_loopback",
- 'description': "Create an isolated loopback interface within the vserver rather than sharing with all vservers.",
- 'category' : 'slice/rspec'},
-
- # CPU share
- {'tagname': "cpu_pct",
- 'description': "Reserved CPU percent",
- 'category' : 'slice/rspec'},
- {'tagname': "cpu_share",
- 'description': "Number of CPU shares",
- 'category' : 'slice/rspec'},
- {'tagname': "cpu_cores",
- 'description': "Number of CPU cores",
- 'category': 'slice/rspec'},
- {'tagname': "cpu_freezable",
- 'description': "Slice processes should be frozen if cpu_cores is 0",
- 'category': 'slice/rspec'},
-
- # Bandwidth limits
- {'tagname': "net_min_rate",
- 'description': "Minimum bandwidth (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_max_rate",
- 'description': "Maximum bandwidth (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_min_rate",
- 'description': "Minimum bandwidth over I2 routes (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_max_rate",
- 'description': "Maximum bandwidth over I2 routes (kbps)",
- 'category' : 'slice/rspec'},
- {'tagname': "net_max_kbyte",
- 'description': "Maximum daily network Tx KByte limit.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_thresh_kbyte",
- 'description': "KByte limit before warning and throttling.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_max_kbyte",
- 'description': "Maximum daily network Tx KByte limit to I2 hosts.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_thresh_kbyte",
- 'description': "KByte limit to I2 hosts before warning and throttling.",
- 'category' : 'slice/rspec'},
- {'tagname': "net_share",
- 'description': "Number of bandwidth shares",
- 'category' : 'slice/rspec'},
- {'tagname': "net_i2_share",
- 'description': "Number of bandwidth shares over I2 routes",
- 'category' : 'slice/rspec'},
-
- # Disk quota
- {'tagname': "disk_max",
- 'description': "Disk quota (1k disk blocks)",
- 'category' : 'slice/rspec'},
-
- # deprecated in nov. 2010
- # Proper operations
- #{'tagname': "proper_op",
- # 'description': "Proper operation (e.g. bind_socket)",
- # 'category' : 'slice/rspec'},
-
- # VServer capabilities
- {'tagname': "capabilities",
- 'description': "VServer bcapabilities (separate by commas)",
- 'category' : 'slice/rspec'},
-
- # Vsys
- # need to allow this one so that slice can have that set from PLC_VSYS_DEFAULT
- {'tagname': "vsys",
- 'description': "Bind vsys script fd's to a slice's /vsys directory.",
- 'category' : 'slice/rspec',
- 'roles': AllPersonRoles()},
- {'tagname': "vsys_vnet",
- 'description': """Specify the IP range that can be used in a given slice
+ [
+
+ # this applies on Node, not on Slice
+ # Slice type (only vserver is supported)
+ # {'tagname': "type",
+ # 'description': "Type of slice (e.g. vserver)",
+ # 'category' : 'slice/general',
+ # 'roles': ['admin','pi']},
+
+ # System slice
+ {'tagname': "system",
+ 'description': "Is a default system slice (1) or not (0 or unset)",
+ 'category': 'slice/general'},
+
+ # Slice enabled (1) or suspended (0)
+ {'tagname': "enabled",
+ 'description': "Slice enabled (1 or unset) or suspended (0)",
+ 'category': 'slice/general'},
+
+ # IP Addresses for a Slice
+ {'tagname': "ip_addresses",
+ 'description': "Add an ip address to a slice/sliver.",
+ 'category': 'slice/rspec'},
+ {'tagname': "isolate_loopback",
+ 'description': "Create an isolated loopback interface within the vserver rather than sharing with all vservers.",
+ 'category': 'slice/rspec'},
+
+ # CPU share
+ {'tagname': "cpu_pct",
+ 'description': "Reserved CPU percent",
+ 'category': 'slice/rspec'},
+ {'tagname': "cpu_share",
+ 'description': "Number of CPU shares",
+ 'category': 'slice/rspec'},
+ {'tagname': "cpu_cores",
+ 'description': "Number of CPU cores",
+ 'category': 'slice/rspec'},
+ {'tagname': "cpu_freezable",
+ 'description': "Slice processes should be frozen if cpu_cores is 0",
+ 'category': 'slice/rspec'},
+
+ # Bandwidth limits
+ {'tagname': "net_min_rate",
+ 'description': "Minimum bandwidth (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_max_rate",
+ 'description': "Maximum bandwidth (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_min_rate",
+ 'description': "Minimum bandwidth over I2 routes (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_max_rate",
+ 'description': "Maximum bandwidth over I2 routes (kbps)",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_thresh_kbyte",
+ 'description': "KByte limit before warning and throttling.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_max_kbyte",
+ 'description': "Maximum daily network Tx KByte limit to I2 hosts.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_thresh_kbyte",
+ 'description': "KByte limit to I2 hosts before warning and throttling.",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_share",
+ 'description': "Number of bandwidth shares",
+ 'category': 'slice/rspec'},
+ {'tagname': "net_i2_share",
+ 'description': "Number of bandwidth shares over I2 routes",
+ 'category': 'slice/rspec'},
+
+ # Disk quota
+ {'tagname': "disk_max",
+ 'description': "Disk quota (1k disk blocks)",
+ 'category': 'slice/rspec'},
+
+ # deprecated in nov. 2010
+ # Proper operations
+ # {'tagname': "proper_op",
+ # 'description': "Proper operation (e.g. bind_socket)",
+ # 'category' : 'slice/rspec'},
+
+ # VServer capabilities
+ {'tagname': "capabilities",
+ 'description': "VServer bcapabilities (separate by commas)",
+ 'category': 'slice/rspec'},
+
+ # Vsys
+ # need to allow this one so that slice can have that set from PLC_VSYS_DEFAULT
+ {'tagname': "vsys",
+ 'description': "Bind vsys script fd's to a slice's /vsys directory.",
+ 'category': 'slice/rspec',
+ 'roles': AllPersonRoles()},
+ {'tagname': "vsys_vnet",
+ 'description': """Specify the IP range that can be used in a given slice